Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “phase transitions”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Structural features of solid-solid phase transitions and lattice dynamics in U 3 O 8

Triuranium octoxide (U 3 O 8 ) undergoes an orthorhombic to hexagonal structural phase transition near Ts=305°C, and a separate nonstructural phase transition at Tc=210°C. The later transition has previously been associated with temperature-induced fluctuations in the uranium oxidation state. A discontinuity in the slope of electrical conductivity versus temperature measurement at 210°C has supported this idea. The orthorhombic phase has three crystallographic sites in two distinct oxidation configurations [2 U(V) and 1 U(VI)], whereas the hexagonal phase has one distinct uranium site. High-resolution x-ray diffraction measurements eliminate the possibility of superlattice Bragg reflections to less than 0.2 e - scattering power and U 3 O 8 is not metallic; consequently, the presence of oxidation fluctuations is required for charge balancing. Interestingly, the order-to-disorder transition occurs at a much lower temperature than the structural transition. Using temperature-dependent x-ray diffraction and Raman spectroscopy, we show anisotropic lattice expansion in the in-plane b and c lattice constants. A specific discontinuity in the temperature derivatives of the b and c lattice constants are the first reported structural signatures of the order-to-disorder transition, suggestive of a change in local U–O coordination. Phonon frequencies of U 3 O 8 measured by Raman spectroscopy show significant temperature-dependent dynamics. Redshifting of several modes between 40 and 300°C cannot be explained by unit cell expansion alone because the unit cell volume decreases in this region. Instead, we show that phonon frequencies are highly correlated with the anisotropic lattice expansion/contraction along specific crystallographic directions.

36 MATERIALS SCIENCE↗
DOE OSTI2021

On the Order Parameter of the Continuous Phase Transition in the Classical and Quantum Mechanical Limits

The mean field theory is revisited in the classical and quantum mechanical limits. Taking into account the boundary conditions at the phase transition and the third law of the thermodynamics the physical properties of the ordered and disordered phases were reported. The equation for the order parameter predicts the occurrence of a saturation of Ψ 2 = 1 near Θ S , the temperature below the quantum mechanical ground state is reached. The theoretical predictions are also compared with high resolution thermal expansion data of SrTiO 3 monocrystalline samples and other some previous results. An excellent agreement has been found suggesting a universal behavior of the theoretical model to describe continuous structural phase transitions.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2022

Accurate localization of Kosterlitz-Thouless-type quantum phase transitions for one-dimensional spinless fermions

We investigate the charge-density wave (CDW) transition for one-dimensional spinless fermions at half band filling with nearest-neighbor electron transfer amplitude t and interaction V. The model is equivalent to the anisotropic XXZ Heisenberg model for which the Bethe Ansatz provides an exact solution. For V>V c =2t, the CDW order parameter and the single-particle gap are finite but exponentially small, as is characteristic for a Kosterlitz-Thouless transition. It is notoriously difficult to locate such infinite-order phase transitions in the phase diagram using approximate analytical and numerical approaches. Second-order Hartree-Fock theory is qualitatively applicable for all interaction strengths, and predicts the CDW transition to occur at V$^{(2)}_{c,2}$≈1.5t. Second-order Hartree Fock theory is almost variational because the density of quasiparticle excitations is small. We apply the density-matrix renormalization group (DMRG) for periodic boundary conditions for system sizes up to 514 sites, which permits a reliable extrapolation of all physical quantities to the thermodynamic limit, apart from the critical region. We investigate the ground-state energy, the gap, the order parameter, the momentum distribution, the quasiparticle density, and the density-density correlation function to locate V c from the DMRG data. In conclusion, tracing the breakdown of the Luttinger liquid and the peak in the quasiparticle density at the band edge permits us to reproduce V c with an accuracy of one percent.

1-dimensional spin chains↗
DOE OSTI2023

Two first-order phase transitions in hybrid compact stars: Higher-order multiplet stars, reaction modes, and intermediate conversion speeds

We study compact stars with hybrid equations of state consisting of a nuclear outer region and two nested quark phases, each separated from the lower density phase by a strong first-order phase transition. The stability of these models is determined by calculating their radial oscillation modes with different conversion rates between adjacent phases and hence junction conditions for the modes at the phase separation interface between them. In the case when the timescale of transition is faster than the period of oscillations, we recover the traditional stability criterion implying that ∂M/∂ρ c > 0 on the stable branch(es), where M is the mass and ρ c is the central density. In the opposite limit of slow conversion, we find stable stellar multiplets beyond triplets consisting of stars that are stable by the usual criterion plus slow-conversion (denoted by s) hybrid stars with ∂M/∂ρ c < 0 that are stabilized due to an alternative junction condition on the fluid displacement field at the interface reflecting the slow rate of conversion. We also study the properties of the reaction mode, the radial mode that only exists for stars with rapid (abbreviated by r) phase transitions, in stars with either two rapid phase transitions or alternating rapid and slow phase transitions for the first time. Here, the implications of alternative junction conditions are also examined, with these conditions generally being found to provide stability properties similar to those for a slow conversion rate.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2020

A more attractive scheme for radion stabilization and supercooled phase transition

We propose a new radion stabilization mechanism in the Randall-Sundrum spacetime, introducing a bulk SU( N H ) gauge field which confines at a TeV scale. It turns out that the radion is stabilized by the balance between a brane tension and a pressure due to the Casimir energy of the strong SU( N H ) gauge field. We investigate the phase transition between the Randall-Sundrum (compactified) spacetime and a de-compactified spacetime and determine the parameter regime in which eternal (old) inflation is avoided and the phase transition can be completed. In comparison to the Goldberger-Wise mechanism, the 5D Planck mass can be larger than the AdS curvature and a classical description of the gravity is reliable in our stabilization mechanism. We also discuss the effect of the phase transition in cosmology such as an entropy dilution and a production of gravitational waves.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2023

Automated piezoresponse force microscopy domain tracking during fast thermally stimulated phase transition in CuInP 2 S 6

Real-time tracking of dynamic nanoscale processes such as phase transitions by scanning probe microscopy is a challenging task, typically requiring extensive and laborious human supervision. Smart strategies to track specific regions of interest (ROI) in the system during such transformations in a fast and automated manner are necessary to study the evolution of the microscopic changes in such dynamic systems. In this work, we realize automated ROI tracking in piezoresponse force microscopy during a fast (≈0.8 °C s –1 ) thermally stimulated ferroelectric-to-paraelectric phase transition in CuInP 2 S 6 . We use a combination of fast (1 frame per second) sparse scanning with compressed sensing image reconstruction and real-time offset correction via phase cross correlation. The applied methodology enables in situ fast and automated functional nanoscale characterization of a certain ROI during external stimulation that generates sample drift and changes local functionality.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Driven-dissipative phase transition in a Kerr oscillator: From semiclassical PT symmetry to quantum fluctuations

We study a minimal model that has a driven-dissipative quantum phase transition, namely a Kerr non-linear oscillator subject to driving and dissipation. Using mean-field theory, exact diagonalization, and the Keldysh formalism, we analyze the critical phenomena in this system, showing which aspects can be captured by each approach and how the approaches complement each other. Then critical scaling and finite-size scaling are calculated analytically using the quantum Langevin equation. Furthermore, the physics contained in this simple model is surprisingly rich: it includes a continuous phase transition, Z 2 symmetry breaking, PT symmetry, state squeezing, and critical fluctuations. Due to its simplicity and solvability, this model can serve as a paradigm for exploration of open quantum many-body physics.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2022

Insight into Pyroelectricity and Phase Transitions in Ferroelectrics from Nonequilibrium Approach: The Case of PbTiO 3

Computational methodology is proposed to simulate time dependent temperature variations via thermostat approach. Here, the methodology is applied to study pyroelectricity under nonequilibrium conditions in prototypical ferroelectric PbTiO 3 . It is found that at room temperature the nonequilibrium effects in pyroelectricity begin manifesting above 1.0 THz and originate from the overlap with the intrinsic soft mode frequency. Therefore, the proposed computational methodology can be used to predict equilibrium pyroelectric response by choosing a frequency of temperature variation below the intrinsic polar mode frequencies for the material. Probing the dynamics of ferroelectric phase transition with the proposed methodology revealed that it takes about a nanosecond for the computational supercell to undergo phase transition. It is concluded that computational techniques capable of simulating picoseconds can be used to compute pyroelectric response from nonequilibrium dynamical approach while those that can reach nanoseconds are suitable for simulating phase transitions in ferroelectrics.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Novel thermal energy storage component: Development, performance, and phase transition diagnosis

Thermal energy storage (TES) using phase change materials (PCMs) is a promising technology for capturing and storing excess thermal energy for later use. However, challenges such as poor heat transfer efficiency and a lack of modular, scalable designs have limited widespread adoption of TES in real-world applications. This study developed and evaluated modular brick-type and blade-type TES prototypes featuring an aluminum housing, an embedded serpentine coil for active or passive thermal exchange, and a cost-effective metal mesh to enhance PCM thermal conductivity. The blade-type TES achieved notable geometric efficiency, with a thickness-to-length ratio of 0.03 and a thickness-to-width ratio of 0.08, enabling highly compact and modular thermal storage suitable for space-constrained applications. The paper presents a detailed evaluation of the TES prototypes’ performance. The comparative analysis indicated that the TES prototypes provide a highly cost-effective, thermally optimized alternative for compact energy storage and load shifting. A novel diagnostic technique was also introduced: using a portable endoscope to capture real-time visualizations of PCM phase transitions inside the TES. This method provides critical insights into internal heat transfer mechanisms, identifies potential issues, and offers valuable support for optimizing the TES design and developing the control algorithm. Overall, the modular brick-type and blade-type TES designs demonstrated in this work provide a scalable, efficient, and economically viable solution for advancing TES across residential, commercial, and industrial sectors. The designs’ compact structure, enhanced thermal performance, and integrated diagnostic capabilities make them strong candidates for future deployment in energy-efficient systems.

Gao, Zhiming [ORNL] (ORCID:0000000271397995)↗
DOE OSTI2025

Phenomenology of bubble size distributions in a first-order phase transition

In a cosmological first-order phase transition (FOPT), the true and false vacuum bubble radius distributions are not expected to be monochromatic, as is usually assumed. Consequently, Fermi balls (FBs) and primordial black holes (PBHs) produced in a dark FOPT will have extended mass distributions. We show how gravitational wave (GW), microlensing and Hawking evaporation signals for extended bubble radius/mass distributions deviate from the case of monochromatic distributions. The peak of the GW spectrum is shifted to lower frequencies, and the spectrum is broadened at frequencies below the peak frequency. Thus, the radius distribution of true vacuum bubbles introduces another uncertainty in the evaluation of the GW spectrum from a FOPT. The extragalactic gamma-ray signal at AMEGO-X/e-ASTROGAM from PBH evaporation may evince a break in the power-law spectrum between 5 MeV and 10 MeV for an extended PBH mass distribution. Optical microlensing surveys may observe PBH mass distributions with average masses below 10 -10 M ⊙ , which is not possible for monochromatic mass distributions. This expands the FOPT parameter space that can be explored with microlensing.

Marfatia, Danny [Univ. of Hawaii at Manoa, Honolul↗
DOE OSTI2023

Influence of External Conditions on the Black-to-Yellow Phase Transition of CsPbI 3 Based on First-Principles Calculations: Pressure and Moisture

All-inorganic CsPbI 3 perovskite has emerged as a promising candidate for next-generation solar cells. However, owing to the poor structural stability of black phase CsPbI 3 perovskite at room temperature, it spontaneously transforms to the yellow, photoinactive, nonperovskite phase at room temperature, limiting further development of CsPbI 3 perovskite solar cells. Here, to better understand the mechanism driving such undesirable phase transformation, we examine the thermodynamics and kinetics associated with γ-to-δ phase transformation using density functional theory calculation. A solid-state nudged elastic band method was employed to find minimum energy pathways assuming a concerted solid-state phase transformation between these two phases. The gas molecules representing atmospheric (H 2 O, O 2 , and N 2 ) and inert (Ar) ambient environments, as well as applied external pressure, were considered to examine the influence of external conditions on the black-to-yellow phase transition. Our calculation reveals that, with increasing pressure, the thermodynamic driving force for converting the γ-phase to the δ-phase increases, whereas a larger activation energy must be overcome for the phase transition to occur. We also investigate the moisture-induced phase transformation with an H 2 O molecule and its dissociated species (H + /OH – ) and demonstrate that the reaction energy barriers can be significantly lowered in the presence of H 2 O or OH – . On the other hand, other nonpolar species (O 2 , N 2 , and Ar) have a negligible effect on the phase transformation kinetics, while they might reduce the thermodynamic driving force for the phase transformation and suppress the undesirable phase transformation. Our theoretical prediction could support recent observations that the γ-to-δ phase transformation occurs rapidly and catalytically in the presence of moisture, whereas in dry argon and dry oxygen atmospheres, the γ-CsPbI 3 remains stable.

14 SOLAR ENERGY↗
DOE OSTI2022

Nonperturbative study of bulk photovoltaic effect enhanced by an optically induced phase transition

Solid systems with strong correlations and interactions under light illumination have the potential for exhibiting interesting bulk photovoltaic behavior in the non-perturbative regime, which has remained largely unexplored in the past theoretical studies. We investigate the bulk photovoltaic response of a perovskite manganite with strongly coupled electron-spin-lattice dynamics, using real-time simulations performed with a tight-binding model. The transient changes in the band structure and the photoinduced phase transitions, emerging from spin and phonon dynamics, result in a nonlinear current versus intensity behavior beyond the perturbative limit. The current rises sharply across a photoinduced magnetic phase transition, which later saturates at higher light intensities due to excited phonon and spin modes. The predicted peak photoresponsivity is orders of magnitude higher than other known ferroelectric oxides such as BiFeO$_3$. We disentangle phonon-and spin-assisted components to the ballistic photocurrent, showing that they are comparable in magnitude. Our results illustrate a promising alternative way for controlling and optimizing the bulk photovoltaic response through the photoinduced phase transitions in strongly-correlated systems.

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2022

Effects of plasma on physical properties of water: nanocrystalline-to-amorphous phase transition and improving produce washing

Recently is was discovered in various applications that many physical and chemical properties of water change their temperature dependence between about 35 and 60 degrees Celsius. In particular, heat conductance, light absorption, and surface tension all change their temperature dependence. These drastic changes were associated with water gradually changing its mesoscopic structure: while at the higher temperatures water is a uniform media (amorphous state), at the temperatures below transition it consists of many nano-to-micro-scale clusters (crystalline state). This transition is similar to the second order phase transition. In the present paper we show that treating water with non-thermal plasma (adding plasma-created active compounds) can lower the temperature of the transition and thus cause a significant change in such physical quantities as surface tension, viscosity, freezing rate, and wettability and washability. We present analytical estimates of the transition temperature shift based on the Debye-Hückel theory. We discuss the produce-washing experiments that illustrate the predicted effects.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2021

Ce stabilized Ni–SrO as a catalytic phase transition sorbent for integrated CO 2 capture and CH 4 reforming

Integration of carbon dioxide capture from flue gas with dry reforming of CH 4 represents an attractive approach for CO 2 utilization. The selection of a suitable bifunctional material serving as a catalyst/sorbent is the key. This paper reports Ni decorated and CeO x -stabilized SrO (SrCe 0.5 Ni 0.5 ) as a multi-functional, phase transition catalytic sorbent material. The effect of CeO x on the morphology, structure, decarbonation reactivity, and cycling stability of the catalytic sorbent was determined with TEM-EDX, XRD, in situ XRD, CH 4 -TPR and TGA. Here, cyclic process tests were conducted in a packed bed reactor. The results indicate that large Ni clusters were present on the surface of the SrNi sorbent, and the addition of CeO 2 promoted even distribution of Ni on the surface. Moreover, the Ce–Sr interaction promoted a complex carbonation/decarbonation phase-transition, i.e. SrCO 3 + CeO 2 ↔ Sr 2 CeO 4 + CO 2 as opposed to the conventional, simple carbonation/decarbonation cycles (e.g. SrCO 3 ↔ SrO + CO 2 ). This double replacement crystalline phase transition mechanism not only adjusts the carbonation/calcination thermodynamics to facilitate SrCO 3 decomposition at relatively low temperatures but also inhibits sorbent sintering. As a result, excellent activity and stability were observed with up to 91% CH 4 conversion, >72% CO 2 capture efficiency and ~100% residual O 2 capture efficiency from flue gas by utilizing the CeO 2 ↔ Ce 2 O 3 redox transition. This renders an intensified process with zero coke deposition. Moreover, the SLDRM with SrCe 0.5 Ni 0.5 has the flexibility to produce concentrated CO via CO 2 -splitting while co-producing a syngas with tunable H 2 /CO ratios.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Magnetocaloric effect in the vicinity of the magnetic phase transition in NdCo 2–x Fe x compounds

In the present paper, the magnetocaloric effect (MCE) of NdCo 2-x Fe x (x = 0, 0.2, 0.4, 0.6) compounds was investigated by magnetization measurements. Here, the temperature-dependent high-resolution synchrotron x-ray diffraction study shows a magnetostructural transition from the paramagnetic cubic phase to the ferromagnetic tetragonal phase below their Curie temperatures. Differential scanning calorimetry analysis shows the absence of thermal hysteresis, indicating the second-order nature of the magnetostructural phase transition in these compounds. The maximum values of magnetic entropy change (ΔS M ) and wide operating temperature (OT) are obtained under a field change of 5 T, which are 7.33 Jkg -1 K -1 , 6.45 Jkg -1 K -1 , 5.71 Jkg -1 K -1 , 4.70 Jkg -1 K -1 and 78 K, 82 K, 85 K, 92 K for x = 0, 0.2, 0.4, and 0.6, respectively. The corresponding values of relative cooling power (RCP) are 529.96 Jkg -1 , 497.25 Jkg -1 , 470.55 Jkg -1 , and 428.31 Jkg -1 . The observed wide OT range and large RCP values are comparable with Gd, Gd 5 Ge 2 Si 2 , and some rare-earth-based giant magnetocaloric materials, making this series of compounds suitable for magnetic refrigeration.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2023

Charge-induced phase transition in encapsulated $\mathrm{HfTe_2}$ nanoribbons

Nanotube encapsulation is a powerful technique for coaxing solids into unconventional configurations. By synthesizing materials within the interior confines of hollow nanotubes, lower dimensional morphologies, such as one-dimensional chains or nanoribbons, are favored. We have used carbon nanotube encapsulation to realize ultranarrow, atomically precise HfTe 2 nanoribbons. A local, electron-beam-stimulated transition from the metallic 1T phase to the previously unreported semiconducting 1H phase is observed. Here, we study computationally how charging can drive the phase transition and the stability of the different atomic configurations.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗