Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “phase errors”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14

Joint map data/phase sequence estimation for trellis phase codes

A unified estimation procedure is formulated for the coherent detection of trellis phase codes, including partial response FM codes and multi-h codes. The unknown carrier phase is imbedded in the system state vector, and by simple augmentation of the decoder's state space, joint data and carrier estimation may be accomplished. The procedure is general to all trellis phase codes analyzed thus far. The effect of a static phase error on detection performance is also treated.

Wilson, S. G.↗

An interferometer-based phase control system

A system for focusing and pointing the SPS power beam is discussed. The system is ground based and closed loop. One receiving antenna is required on Earth. A conventional uplink data channel transmits an 8-bit phase error correlation back to the SPS for sequential calibration of each power module. Beam pointing resolution is better than 140 meters at the Rectenna.

Ott, J. H.↗

Airborne Electronically Steerable Phased Array (AESPA) program

The basic concept and design of a flatplate-fed transmission array are described and system performance requirements are summarized. Particular emphasis is given to the design of the aperture, the radiating element, the phase shifter, the flatplate feed, and the mechanical support structure. Fabrication and testing techniques are considered. Of the three major parameters of interest in demonstrating the performance capabilities of the transmissive array, beamwidth was shown to be the least sensitive to system amplitude and phase errors. Beam pointing angle was also shown to be relatively insensitive to errors. Close agreement between measured and calculated values was found for array gain. The greatest difference was found for array sidelone level.

Source record↗

An interferometer based phase control system

An interferometer based phase control system for focusing and pointing the solar power satellite (SPS) power beam is discussed. The system is ground based and closed loop. One receiving antenna is required on Earth. A conventional uplink data channel transmits an 8 bit phase error correction back to the SPS for sequential calibration of each power module. Beam pointing resolution is better than 140 meters at the rectenna.

Ott, J. H.↗

Coaxial prime focus feeds for paraboloidal reflectors

A TE11 - TM11 dual mode coaxial feed for use in prime focus paraboloidal antenna systems is investigated. The scattering matrix parameters of the internal bifurcation junction was determined by the residue calculus technique. The scattering parameters and radiation fields of the aperture were found from the Weinstein solution. The optimum modeing ratio for minimum cross-polarization was determined along with the corresponding optimum feed dimensions. A peak cross-polarization level of -58 dB is predicted. The frequency characteristics were also investigated and a bandwidth of 5% is predicted over which the cross-polarization remains below -30 dB, the input VSWR is below 1.15, and the phase error is less than 10 deg. Theoretical radiation patterns and efficiency curves for a paraboloidal reflector illuminated by this feed were computed. The predicted sidelobe level is below -30 dB and aperture efficiencies greater than 70% are possible. Experimental results are also presented that substantiates the theoretical results. In addition, experimental results for a 'short-cup' coaxial feed are given. The report includes extensive design data for the dual-mode feed along with performance curves showing cross-polarization as a function of feed parameters. The feed is useful for low-cost ground based receiving antennas for use in direct television satellite broadcasting service.

Collin, R. E.↗

Analysis of CO2 bands near 2600 per cm

The parameters of three bands of CO2 near 2600 per cm have been determined by the nonlinear least squares method of whole-band analysis. Careful modeling of the effect of the Fourier transform spectrometer on the spectrum has made it possible to reduce the difference between the observed and calculated spectra to values close to the estimated noise in the experimental spectrum. In particular, it is found necessary to model the effects of phase error even though these are difficult to observe in the experimental spectra.

Hoke, M. L.↗

Focal surfaces of offset dual-reflector antennas

An analytical technique is described for finding the best focal surfaces for offset-fed dual-reflector antennas. A ray tracing procedure traces the loci of rays incident on the main reflector onto a plane or 'screen' situated perpendicular to a central ray of the antenna system. Given, then, by computer graphics, the best feed locations for azimuth and elevation plane patterns, an aperture diffraction method is used which can compute the sidelobe levels and beamwidths resulting from aperture phase errors on scanned or multibeam patterns. High-magnification Cassegrain or Gregorian antennas, with tilt angles optimised according to Japanese criteria, produce excellent radiation diagrams many beamwidths from the central, unaberrated pattern direction.

Sletten, C. J.↗

NRZ Data Asymmetry Corrector and Convolutional Encoder

Circuit compensates for timing, amplitude and symmetry perturbations. Data asymmetry corrector and convolutional encoder regenerate data and clock signals in spite of signal variations such as data or clock asymmetry, phase errors, and amplitude variations, then encode data for transmission.

Pfiffner, H. J.↗

Radiometric correction of atmospheric path length fluctuations in interferometric experiments

To support very long baseline interferometric experiments, a system has been developed for estimating atmospheric water vapor path delay. The system consists of dual microwave radiometers, one operating at 20.7 GHz and the other at 31.4 GHz. The measured atmospheric brightness temperatures at these two frequencies yield the estimate of the precipitable water present in both vapor and droplets. To determine the accuracy of the system, a series of observations were undertaken, comparing the outputs of two water vapor radiometers with the phase variation observed with two connected elements of the very large array (VLA). The results show that: (1) water vapor fluctuations dominate the residual VLA phase and (2) the microwave radiometers can measure and correct these effects. The rms phase error after correction is typically 15 deg at a wavelength of 6 cm, corresponding to an uncertainty in the path delay of 0.25 cm. The residual uncertainty is consistent with the stability of the microwave radiometer but is still considerably larger than the stability of the VLA. The technique is less successful under conditions of heavy cloud.

Resch, G. M.↗

A low noise synthesizer for autotuning and performance testing of hydrogen masers

A low noise synthesizer has been developed for use in hydrogen maser autotuning and performance evaluation. This synthesizer replaces the frequency offset maser normally used for this purpose and allows the user to maintain all masers in the ensemble at the same frequency. The synthesizer design utilizes a quartz oscillator with a BVA resonator. The oscillator has a frequency offset of 5 X 10 to the minus 8 power. The BVA oscillator is phase-locked to a hydrogen maser by means of a high gain, high stability phase-locked loop, employing low noise multipliers as phase error amplifiers. A functional block diagram of the synthesizer and performance data will be presented.

Cloeren, J. M.↗

A generalization of the near-optimum binary coherent state receiver concept

The structure of a maximum a posteriori decoder is derived for binary optical fields processed according to Kennedy's near-optimum scheme, but operating in the presence of random optical phase-error and interfering background fields. An exact expression is found for the error probability, and examples to illustrate decoder performance under various operating conditions of interest are provided.

Vilnrotter, V. A.↗

Dual-mode coaxial feed with low crosspolarisation

Design data for optimized TE(11)-TM(11) dual-mode coaxial prime focus feeds is presented. The optimized feeds have a crosspolarization below -30 dB, an input reflection coefficient below 0.1 and very little phase error in their radiation patterns, over a 5 percent bandwidth. Experimental patterns are also given that show that the theoretically derived design data can be relied upon. The optimized feeds are useful for paraboloidal reflectors with focal-length/diameter ratios in the range 0.3 to 0.5, and will give overall efficiencies as high as 70 percent or more with sidelobes below -30 dB.

Collin, R. E.↗

Radiometric calibration of the Shuttle Imaging Radar (SIR-C) system

The radiometric calibration accuracy of the Shuttle Imaging Radar (SIR-C) sensor is discussed. The analysis includes the antenna, RF electronics, the digital data handling system, the platform attitude control, attitude determination accuracy, and orbit effects. The radiometric distortion of the image products by the ground processing system used for the image formation is also considered. Since the SIR-C system is a dual-frequency quad-polarized system (i.e., 8 channels), the amplitude and phase error is considered over all possible operating modes and environments for absolute and relative (long-term and short-term) calibration within a channel and across channels.

Curlander, John C.↗

Profiling Saturn's rings by radio occultation

The development of reconstruction algorithms that correct for diffraction effects in radio occultation measurements is described. The reciprocal Fresnel transform relationship between the complex amplitude of the observed coherent signal and the complex microwave transmittance of the rings is derived using the Huygens-Fresnel formulation of the diffraction problem. The effects of the finite data segment width, the uncertainties in the Fresnel scale, systematic phase errors in the kernel of the inverse transform, reference oscillator instabilities, and random noise measurements on the resolution of the reconstructed transmittance are analyzed. Examples of reconstructed opacity profiles for some regions of Saturn's rings derived by applying the reconstruction theory to Voyager 1 at Saturn data are presented.

Marouf, Essam A.↗

Long term prediction of roll phase for an undisturbed spinning spacecraft

This paper describes the attitude control of the Pioneer 10 spacecraft since the loss of the sun-sensor signal in late 1983. It is necessary to control the attitude of the spin-stablized spacecraft so as to maintain communications with earth. Roll phase is calculated on earth using data from a science instrument on-board Pioneer 10, the imaging-photopolarimeter, which, along with its other functions, was designed to collect images of Jupiter during encounter in 1973. With calculation of instantaneous roll phase performed only once per week, the spacecraft roll angle can be predicted more than a week ahead for timing reorientation impulses. Attitude reorientation maneuvers based on roll phase predictions have been successfully executed for several years on Pioneer 10. Of 10 maneuvers analyzed in this paper, predictions were made for as many as 10 days in the future based on a roll-phase measurements spanning only 12 days of data. The average maneuver was planned by projecting the roll phase for 3 days (22,000 spacecraft revolutions) and resulted in a maneuver execution phase error of only 11 deg.

Smith, M. A.↗

Fast Synchronization With Burst-Mode Digital Signals

Oscillator quickly synchronized with data clock. Sampling clock synchronized with sinusoid by feedback technique. Signal is measure of phase-error angle theta and generated digitally by technique related to calculation of theta from periodic samples of sinusoid.

Lee, Lin-Nan↗

Optical communication with semiconductor laser diodes

Slot timing recovery in a direct detection optical PPM communication system can be achieved by processing the photodetector waveform with a nonlinear device whose output forms the input to a phase lock group. The choice of a simple transition detector as the nonlinearity is shown to give satisfactory synchronization performance. The rms phase error of the recovered slot clock and the effect of slot timing jitter on the bit error probability were directly measured. The experimental system consisted of an AlGaAs laser diode (lambda = 834 nm) and a silicon avalanche photodiode (APD) photodetector and used Q=4 PPM signaling operated at a source data rate of 25 megabits/second. The mathematical model developed to characterize system performance is shown to be in good agreement with actual performance measurements. The use of the recovered slot clock in the receiver resulted in no degradation in receiver sensitivity compared to a system with perfect slot timing. The system achieved a bit error probability of 10 to the minus 6 power at received signal energies corresponding to an average of less than 60 detected photons per information bit.

Davidson, F.↗

Accuracy of a class of concurrent algorithms for transient finite element analysis

The accuracy of a new class of concurrent procedures for transient finite element analysis is examined. A phase error analysis is carried out which shows that wave retardation leading to unacceptable loss of accuracy may occur if a Courant condition based on the dimensions of the subdomains is violated. Numerical tests suggest that this Courant condition is conservative for typical structural applications and may lead to a marked increase in accuracy as the number of subdomains is increased. Theoretical speed-up ratios are derived which suggest that the algorithms under consideration can be expected to exhibit a performance superior to that of globally implicit methods when implemented on parallel machines.

Ortiz, Michael↗