Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “oxygen diffusion”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Stone-Wales defect-rich carbon-supported dual-metal single atom sites for Zn-air batteries

In this study, we aim to obtain a fundamental understanding of active sites near stone-wales (SW) defects rich nitrogen-doped graphene (DG) with specific coordination of carbon atom rings. It reveals that the SW rich defects ( e.g., pentagon (5), pentagon—octagon—pentagon ( i.e . 585), or pentagon-heptagon-heptagon-pentagon (5775) rings, appears correspondingly with carbon rings that brought active sites during catalytic reactions. Moreover, we anchored dual isolated metallic atoms (Ni/Fe) on DG support via linkers (O/N) called NiFe-DG. X-ray absorption spectroscopy indicates Ni/Fe metal single atoms are embedded via Fe-N 4 and Ni-N 4 coordination on DG surfaces. It exhibits high catalytic activity for oxygen reduction reaction (ORR) with an onset potential of 0.97 V, a half-wave potential of 0.86 V, and diffusion current density of 5.7 mA cm – 2 , which is at par with commercial Pt/C. The catalyst shows superior stability, retained 82% of the initial current density even after 12 h under an applied potential of 0.86 V. Similarly, the oxygen evolution reaction (OER) overpotential of 358 mV was achieved at 10 mA cm – 2 with a lower Tafel slope value (76 mV/dec) than commercial Pt/C. It maintains 85% stability for 12 h at a constant potential of 1.588 V, shows better stability than commercial Pt/C.

25 ENERGY STORAGE↗
DOE OSTI2020

Unraveling Na and F coupling effects in stabilizing Li, Mn-rich layered oxide cathodes via local ordering modification

Regardless of the prevailing capacity and energy density of lithium, manganese-rich layered oxide (LMR-NMC) cathodes, continuous decay of voltage and overall energy density during cycling hinders this material from commercialization in Li-ion batteries. Although significant work focuses on single doping of Na and F, analysis in portraying the benefit of these ions in diminishing the structural distortion during activation cycle is in doubt. In this study, the effects of co-doping Na and F into the LMR-NMC structure in stabilizing the structure and mitigating oxygen loss during the first cycle are closely examined via in situ x-ray measurements. Na and F co-doping shows a 30% lower degree of Li + /Ni 2+ mixing in the Li layer (C2/m structure), 50% reduced Debye-Waller factor of Mn-O bonding, increase reversible TM migration, and faster Li diffusion relative to the pristine material. Due to the utilization of Ni redox chemistry below 4.4 V, less oxygen redox is required for charge compensation at high voltage. This study offers the first instance to quantitatively evaluate the effects of co-doping Na and F in LMR-NMC cathode in order to minimize voltage degradation by altering the local ordering of O3-type structure, which may rationalize strategies to overcome the issues of the material.

25 ENERGY STORAGE↗
DOE OSTI2021

Defect-Driven Oxide Transformations and the Electrochemical Interphase

The redox reaction pathway is crucial to the sustainable production of the fuels and chemicals required for a carbon-neutral society. Our society is becoming increasingly dependent on devices using batteries and electrolyzers, all of which rely on a series of redox reactions. The overall properties of oxide materials make them very well suited for such electrochemical and catalytic applications due to their associated cationic redox properties and the static site-adsorbate interactions. As these technologies have matured, it has become apparent that defect-driven redox reactions, defect-coupled diffusion, and structural transformations that are both time- and rate-dependent are also critical materials processes. This change in focus, considering not only redox properties but also more complex, dynamic behaviors, represents a new research frontier in the molecular sciences as they are strongly linked to device operation and degradation and lie at the heart of various phenomena that take place at electrochemical interfaces. Fundamental studies of the structural, electronic, and chemical transformation mechanisms are key to the advancement of materials and technological innovations that could be implemented in various electrochemical systems. In this Account, we focus on recent studies and advances in characterizing and understanding the dynamic redox evolution and structural transformations that take place in model perovskites and layered oxides under reactive conditions and correlate them with degradation mechanisms and operations in electrolyzers and batteries. We show that the dynamic evolution of oxygen vacancies and cationic migration in the surface or bulk occurs at the solid-liquid interface, using a combination of different synchrotron-based Xray spectroscopies and scattering probes. Detailed redox-structure-reactivity correlation studies show how defects and diffusion processes can be tailored to drive various physical and chemical transformations in electrolyzers and batteries. We also highlight a strong correlation between oxygen redox reactivity and structural reorganization in both model thin films and particles, helping to bridge the gap between fundamental studies of the reaction mechanism and device applications. Finally, on the basis of these findings, we discuss strategies to probe and tune the redox reactivity and structural stability of the redox-active oxide interphase toward devising efficient pathways for energy and chemical harvesting.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Density Functional Theory Study of Iron–Oxygen Divacancies in Magnetite (Fe 3 O 4 ) and Hematite (Fe 2 O 3 )

Density functional theory (DFT) calculations are employed to investigate the formation energies, charge redistribution, and binding energies of iron–oxygen divacancies in magnetite (Fe 3 O 4 ) and hematite (Fe 2 O 3 ). For magnetite, we focus on the low-temperature phase to explore variations with local environments. Building on previous DFT calculations of the variations in formation energies for oxygen vacancies with local charge and spin order in magnetite, we extend this analysis to include octahedral iron vacancies before analyzing the iron–oxygen divacancies. We also assessed the relative stability of iron–oxygen divacancies by comparing their formation energies with those of individual vacancies. Our findings reveal a significant energetic driving force for the formation of divacancy clusters, particularly in magnetite, where divacancies in the +1 charge state exhibit formation energies comparable to those of neutral iron vacancies under oxidizing conditions. In hematite, the results indicate a strong tendency for oxygen vacancies to bind to iron vacancies. These results highlight the significance of iron–oxygen vacancy complexes in the transport properties of iron oxides, with particular relevance to diffusion mechanisms under irradiation conditions.

36 MATERIALS SCIENCE↗
DOE OSTI2021

In Situ Formation of Polycyclic Aromatic Hydrocarbons as an Artificial Hybrid Layer for Lithium Metal Anodes

Nonuniform Li deposition causes dendrites and low Coulombic efficiency (CE), seriously hindering the practical applications of Li metal. Herein, we developed an artificial solid-state interphase (SEI) with planar polycyclic aromatic hydrocarbons (PAHs) on the surface of Li metal anodes by a facile in situ formation technology. The resultant dihydroxyviolanthron (DHV) layers serve as the protective layer to stabilize the SEI. In addition, the oxygen-containing functional groups in the soft and conformal SEI film can regulate the diffusion and transport of Li ions to homogenize the deposition of Li metal. The artificial SEI significantly improves the CEs and shows superior cyclability of over 1000 h at 4 mAh cm –2 . The LiFePO 4 /Li cell (2.8 mAh cm –2 ) enables a long cyclability for 300 cycles and high CEs of 99.8%. Furthermore, this work offers a new strategy to inhibit Li dendrite growth and enlightens the design on stable SEI for metal anodes.

25 ENERGY STORAGE↗
DOE OSTI2021

Rapid Atomic Ordering Transformation toward Intermetallic Nanoparticles

Chemically ordered intermetallic nanoparticles are promising candidates for energy-related applications such as electrocatalysis. However, the synthesis of intermetallics generally requires long annealing (several hours) to achieve the ordered structure, which causes nanoparticles agglomeration and diminished performance, particularly for catalysis. Herein, we demonstrate a new rapid Joule heating approach that can synthesize highly ordered and well-dispersed intermetallic nanoparticles. As a proof-of-concept, we synthesized fully ordered Pd 3 Pb intermetallic nanoparticles that feature small size distribution (~6 nm). Computational analysis of the L1 2 Pd 3 Pb material suggests that this rapid atomic ordering transformation can be attributed to a vacancy-mediated diffusion mechanism. Moreover, the nanoparticles demonstrate excellent electrocatalytic activity and exceptional stability for the oxygen reduction reaction (ORR), retaining >95% of the current density over 10 h of chronoamperometry test with negligible structural and compositional changes. Furthermore, this study demonstrates a new strategy of providing a new direction for intermetallic synthesis and catalyst discovery.

25 ENERGY STORAGE↗
DOE OSTI2021

Optimizing Power Reclamation of Micro Hydro Turbines in WWTPs Aeration Basins

Abstract This study investigates the optimum operating conditions and design configurations that can optimize the power reclaimed by small hydro turbines derived by the rising water-bubble current. The rising current is generated by the compressed air introduced by the diffusers at the bottom of aeration basins of Wastewater Treatment Plants (WWTPs). While optimizing the power production, the standard oxygen transfer efficiency (SOTE) is monitored since it is a significant parameter that cannot be sacrificed in the operation of WWTPs. Using one set of turbine blades, it was found out that the highest velocity is obtained in the upper half of the water column (70% - 80%). In contrast, the lowest velocities were obtained just above the air diffuser and at the water surface. Testing started with using a single turbine (ST) to determine the location of the optimum power reclaimed at each tested airflow (1.18, 1.42, 1.65, and 1.89 L/s). Then using double turbine (DT) and triple turbine (TT) to compare their performance to the ST’s maximum power increased power reclamation. The maximum percentage of increase in power reclamation for DT is 19.59%, while it is 20.24% in the case of TT. At a commonly used airflow in WWTPs (1.42 L/s), the optimum configurations of DTs and TTs were selected to investigate the effect of having the proposed setup on the SOTE. For membrane diffusers, DTs and TTs limited the dispersion of the air bubbles in the tank, therefore, reducing the SOTE (8.3% for DT and 3.7% for the TT). The ceramic and sharp-nub diffusers were also tested versus rubber membrane ones to determine the effect of using the ceramic and sharp-nub diffusers on the power reclamation and SOTE. Ceramic diffusers neither achieve higher power reclamation than the membrane nor increases the SOTE. In contrast, sharp-nub diffusers increase the SOTE for all configurations compared to membranes, but this came into account of power reclamation, where sharp-nub diffusers cause a DT and a TT to produce less power than ST does.

Energy & Fuels↗
DOE OSTI2021

Low diffusive methane emissions from the main channel of a large Amazonian run-of-the-river reservoir attributed to high methane oxidation

The global development of hydropower dams has rapidly expanded over the last several decades and has spread to historically non-impounded systems such as the Amazon River's main low land tributaries in Brazil. Despite the recognized significance of reservoirs to the global methane (CH4) emission, the processes controlling this emission remain poorly understood, especially in Tropical reservoirs. Here we evaluate CH4 dynamics in the main channel and downstream of the Santo Antônio hydroelectric reservoir, a large tropical run-of-the-river (ROR) reservoir in Amazonia. This study is intended to give a snapshot of the CH4 dynamics during the falling water season at the initial stage after the start of operations. Our results show substantial and higher CH4 production in reservoirs' littoral sediment than in the naturally flooded areas downstream of the dam. Despite the large production in the reservoir or naturally flooded areas, high CH4 oxidation in the main channel keep the concentration and fluxes of CH4 in the main channel low. Similar CH4 concentrations in the reservoir and downstream close to the dam suggest negligible degassing at the dam, but stable isotopic evidence indicates the presence of a less oxidized pool of CH4 after the dam. ROR reservoirs are designed to disturb the natural river flow dynamics less than traditional reservoirs. If enough mixing and oxygenation remain throughout the reservoir's water column, naturally high CH4 oxidation rates can also remain and limit the diffusive CH4 emissions from the main channel. Nevertheless, it is important to highlight that our results focused on emissions in the deep and oxygenated main channel. High emissions, mainly through ebullition, may occur in the vast and shallow areas represented by bays and tributaries. However, detailed assessments are still required to understand the impacts of this reservoir on the annual emissions of CH4.

Amazon, aquatic, biogeochemistry, carbon cycling, ↗
DOE OSTI2023

Theoretical estimates of flammability bounds for thin condensed fuel diffusion flames in microgravity using detailed models of chemistry and radiation

Recently, U-shape flammability maps have been constructed showing minimal oxygen vs. flame strain for opposed flame spread in micro-gravity by Olson and Ferkul. The U-shape defines the limiting flammability bounds from radiative extinction and flame blow-off. Here, the minimum of the U corresponds to the minimum possible oxidizer concentration where burning can occur, and is an important quantity of interest for fire safety. While high strain extinction bounds have been well analyzed, low strain radiative extinction has not. To estimate low strain extinction, in this study an analytical theory is developed based on thin flame theory coupled with a heat and mass transfer model for solid fuels. A reaction progress variable based on the Damköhler number is adapted in the theory to account for incomplete combustion at high strain rates and enable the capturing of the full flammability map. The analytical model is compared to a one dimensional numerical model w/ detailed chemical kinetics and coupled radiation heat transfer in planar and spherical geometries. The flammability maps are then qualitatively compared to experimental extinguishment data compiled by Olson and Ferkul for cylindrical rods of PMMA showing similar trends. The results show the newly developed analytics capture the radiative extinction bound compared to the numerical model and qualitatively agrees with microgravity data.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗
DOE OSTI2023

Pressure effects on reactivity and extinction of n -dodecane diffusion cool flame

Low-temperature combustion at high pressure has gained increasing interest owing to the growing demand for clean and efficient propulsion and energy systems. In particular, cool flame structure, extinction limits, and fuel reactivities at high pressure are critical in affecting the engine performance at near-limit conditions. Here, this paper investigates the effects of pressure on the cool flame extinction limit, structure, radical index, reactivity, and oxygen concentration dependence by experiments, analysis, and modeling. A large n-alkane, namely n-dodecane (n C 12 H 26 ), is selected to study its diffusion cool flame dynamics and reactivity in a high-pressure counterflow burner up to 10 atm. The experimental results show that higher pressure increases the cool flame extinction strain rates, and that the pressure-weighted extinction strain rate (aP) is proportional to the square of pressure, P 2 . A scaling analysis explains the relationship between the dependence of flame structure, heat release rate, and pressure-weighted cool flame strain rate on pressure. Furthermore, radical indexes at different pressures are measured by isolating the thermal and transport effects from the chemical contribution to diffusion cool flame extinction. The radical index clearly shows that the low-temperature reactivity increases with pressure. In addition, due to the critical role of multiple oxygen addition reactions in low-temperature chemistry, the relationship between the cool flame extinction limit and the oxygen concentration is explored. It is found that the cool flame extinction limits are proportional to the n th power of the oxygen concentration, [O 2 ] n , and increasing pressure leads to stronger extinction limit dependence (larger n) on the oxygen concentration. The present experiment and detailed kinetic analysis show clearly that increasing pressure promotes the low-temperature chemistry including the oxygen addition reactions, while the scaling analysis explains well the experimental results.

33 ADVANCED PROPULSION SYSTEMS↗
DOE OSTI2024

Materials Science of the Interstitial Doping Process

Particle accelerators are an increasingly important tool for frontier science. Growing initial and operating costs are a significant barrier for upgrades and for new machines. While everything matters, the major cost contributor is the SRF cavities and their ancillary facilities (e.g., cryoplant). Accordingly, the accelerator science community devotes much R&D effort to improving their energy efficiency (increased Q o ) and gradient (E acc ). While improved gradient is at the forefront for certain machines (ILC), improved quality factor has broader impact, benefitting all SRF applications. An important opportunity for accelerator science and technology to move forward arose in the course of building the LCLS-II, the second generation Linac Coherent Light Source at SLAC. At more or less the same time, researchers at Fermilab discovered that introducing a small amount of nitrogen to the niobium surface could improve the mid-range quality factor as much as three-fold. A firm resolution of how nitrogen confers its benefit attracts much current research interest. The key elements of the “nitrogen doping” process were vacuum bake at 800 °C, brief exposure to mTorr of nitrogen at several hundred degrees followed by electropolish (EP) to remove several microns from the surface to eliminate unwanted nitrides: While the process as a whole was novel, the comprising unit operations are familiar to the accelerator community. It was judged reasonable to adopt it as a cost-reduction technology for LCLS-II. Researchers carried out a program of varying process parameters and measuring performance in single-cell cavities, leading to a consensus stable protocol for the project. The transition to vendor fabrication and multiple niobium sources has presented unforeseen challenges of performance variation evidently not connected to anything that could be incorporated in a purchase specification. Moving beyond the high temperature N-doping process above, researchers reported a simplified process consisting entirely of tens of hours anneal in a N atmosphere at low temperatures (~120°C – 160°C) after 800 °C UHV bake. These processes typically yield a few-nm doped layer while the high temperature process yields at least a few to many micron doped layer. Even more recently, oxygen has been used to dope instead of nitrogen which leaves a few-µm O-alloyed layer upon vacuum annealing for 300 °C for ~3 hours. The investigation of these materials is just beginning, but the process simplification they may offer is surely attractive. The very low quantity of material that appears to be significant in the “infusion” process indicates the need for very careful control of gas species available for diffusion into the surface during low temperature treatment, both for process control and research to characterize the underlying dynamics. Oxygen alloying offers the further opportunity to utilize the decomposition of the surface native oxide as the dopant source. It is necessary to understand and (thus) manage this process. We have been supported by the Department of Energy Offices of High Energy Physics and Nuclear Physics to pursue this goal.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Mechanism of Stoichiometrically Governed Titanium Oxide Brownian Tree Formation on Stepped Au(111)

Previously observed formation of substoichiometric titanium oxide dendritic structures across terraces of Au(111) is computationally studied and shown to follow the classical fractal formation mechanism of diffusion-limited aggregation (DLA). Globally optimized gas-phase oxide cluster structures are sampled in a variety of landing formations on gold surfaces and shown to favor isomers driving polymerization to Brownian tree fractal structures. Mobility of Ti 3 O 5 monomers is shown to be extremely high, with diffusion barriers of 0.21 eV or less. Through bonding stabilization, polymerization of these monomers is energetically favorable and irreversible on the 111 terrace but geometrically impossible to propagate along the step edge. Simulated scanning tunneling microscopy (STM) images show strong similarity to experiment. By contrast, observation of Ti 3 O 6 aggregating as wires along step edges is explained by the affinity of oxygen to step edges and statistical arguments for aggregation entropy at the step, in addition to low barriers for monomer diffusion and polymerization.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Tetrahedral Zn 2+ doping LiNi 0.6 Mn 0.2 Co 0.2 O 2 improves discharge capacity retention by altering surface Ni valence during cycling and preventing oxygen evolution

5 mol-% Zn 2+ was added to the co-precipitation synthesis of LiNi 0.6 Mn 0.2 Co 0.2 O 2 (NMC622) to understand Zn's effect on the structural and electronic properties of NMC622. Zn is determined to successfully dope into the NMC crystal lattice as there is an increase in d-spacing along the [003], [104], and [110] directions and an increase in molar volume (100.75 cm 3 mol -1 for NMC622 and 101.00 cm 3 mol -1 for Zn-NMC). Through XPS, Zn is determined to dope on the tetrahedral 6c Wyckoff site in the NMC structure and TEM-EDS reveals that despite a slight ZnO impurity phase, 1.4 mol-% Zn successfully dopes into the crystal structure. Furthermore, cyclic voltammetry shows a suppressed anodic wave associated with oxygen evolution and EIS demonstrates that Zn-doped NMC decreases charge transfer resistance and increases Li diffusion by an order of magnitude. After the formation cycles, NMC has a higher 1 C accessible capacity, 141 mAh/g, over Zn-NMC (132 mAh/g), but after long term cycling Zn-NMC has a higher accessible capacity (117 mAh/g compared to 96 mAh/g for NMC) and increases discharge capacity retention by 18% leading to longer cycle life.

Electrochemistry↗
DOE OSTI2020

In Situ Identification of Reaction Intermediates and Mechanistic Understandings of Methane Oxidation over Hematite: A Combined Experimental and Theoretical Study

Effective methane utilization for either clean power generation or value-added chemical production has been a subject of growing attention worldwide for decades, yet challenges persist mostly in relation to methane activation under mild conditions. Here, we report hematite, an earth-abundant material, to be highly effective and thermally stable to catalyze methane combustion at low temperatures (<500 °C) with a low light-off temperature of 230 °C and 100% selectivity to CO 2 . The reported performance is impressive and comparable to those of precious-metal-based catalysts, with a low apparent activation energy of 17.60 kcal·mol –1 . Our theoretical analysis shows that the excellent performance stems from a tetra-iron center with an antiferromagnetically coupled iron dimer on the hematite (110) surface, analogous to that of the methanotroph enzyme methane monooxygenase that activates methane at ambient conditions in nature. Isotopic oxygen tracer experiments support a Mars van Krevelen redox mechanism where CH 4 is activated by reaction with a hematite surface oxygen first, followed by a catalytic cycle through a molecular-dioxygen-assisted pathway. Surface studies with in situ diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS) and density functional theory (DFT) calculations reveal the evolution of reaction intermediates from a methoxy CH 3 –O–Fe, to a bridging bidentate formate b-HCOO–Fe, to a monodentate formate m-HCOO–Fe, before CO 2 is eventually formed via a combination of thermal hydrogen-atom transfer (HAT) and proton-coupled electron transfer (PCET) processes. Finally, the elucidation of the reaction mechanism and the intermediate evolutionary profile may allow future development of catalytic syntheses of oxygenated products from CH 4 in gas-phase heterogeneous catalysis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Modelling and analysis of salt-convection effect on oxide reduction process for uranium oxides using smoothed particle hydrodynamics

Oxygen ion transport via molten salt continuum is a key kinetic feature of electrochemical reduction process for uranium oxides in molten salt. During the electrolysis, the evolution of oxygen ion concentration field in molten salt continuum appears from porous metallic layer to open bulk salt. Despite the important role affecting process throughput, its effect coupled with controlled salt movement was not adequately investigated. To capture the reactive oxygen ion transport phenomena, a multidimensional reduction model based on smoothed particle hydrodynamics (SPH) was combined with the advection-diffusion model. A pelletized oxide fuel bed capturing interconnected salt continuum is considered as a reactant material geometry, which allows forced convective delivery of molten salt through the reactant materials with a relatively low pressure head. Here, in this study, reduction time of a pelletized-fuel bed was quantified with respect to key design parameters of the reactant material configuration. The simulation results demonstrated the advantage of salt convection which effectively removes oxygen ion products from the reactant materials and consequently accelerates the reduction process. Moreover, the reduction-time correlation of a single pelletized fuel was developed as a function of relevant dimensionless parameters and was extended to the application for a pelletized-fuel bed. Finally, several insights and implications in the use of a pelletized oxide fuel were presented. The developed SPH-based framework enabled multi-physics analysis of governing dynamics in appreciating and screening candidate reactant material configurations in a cost-effective manner.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2025

Controllable oxygen vacancy defect engineering of BiVO 4 porous structures for room temperature NH 3 detection

Controlling structural features of sensing material while judiciously introducing vacancy defect states for revamping the electronic properties of the sample to obtain its superior gas sensing performance, is quite rare. Herein, we report for the first time, the room temperature (RT) ammonia (NH 3 ) detection of peanut-like porous bismuth vanadate (BiVO 4 ) with a stable monoclinic phase. The developed BiVO 4 possess abundant oxygen vacancies and porosity by virtue of calcinations (400–800 ℃). BiVO 4 calcined at 400 ℃ exhibits high selectivity towards NH 3 with a maximum response of 1421 @ 270 ppm at RT, which is 2.5 fold enhanced compared to without calcined BiVO 4 (response of 547 @ 270 ppm NH 3 ). The oxygen defective BiVO 4 appeared highly durable and stable even under high humid conditions (∼60 %). Besides, the porosity of BiVO 4 not only enhances the specific surface area (19.8 m 2 /g) but also results in fast diffusion of NH 3 molecules, leading to a reduction in the decay time (34 s for 90 ppm NH 3 ). The density functional theory (DFT) uncovers that the oxygen vacancy formation in BiVO 4 augments the NH 3 sensing capabilities by enhancing the adsorption energy of NH 3 . This work provides insight into the sensing mechanism of increased response caused by defect engineering and porosity, which will be favourable for fabricating high-performance NH 3 sensors at RT.

DFT analysis↗
DOE OSTI2020

Molecular Origins of the Barriers to Proton Transport in Acidic Aqueous Solutions

The self-consistent iterative multistate empirical valence bond (SCI-MS-EVB) method is used to analyze the structure, thermodynamics, and dynamics of hydrochloric acid solutions. The reorientation timescales of irreversible proton transport are elucidated by simulating 0.43 M, 0.85 M, 1.68 M, and 3.26 M HCl solutions at 270 K, 285 K, 300 K, 315 K, and 330 K. The results indicate increased counter-ion pairing with increasing concentration, which manifests itself via a reduced hydronium oxygen–chloride (O*-Cl) structuring in the radial distribution functions. Increasing ionic concentration also reduces the diffusion of the hydrated excess protons, principally by reducing the contribution of the Grotthuss proton hopping (shuttling) mechanism to the overall diffusion process. In agreement with prior experimental findings, a decrease in the activation energy of reorientation timescales was also observed, which is explicitly explained using activated rate theory and an energy-entropy decomposition of the state-averaged radial distribution functions. Furthermore, these results provide atomistic verification of suggestions from recent two-dimensional infrared spectroscopy experiments that chloride anions (as opposed to hydrated excess protons) create entropic barriers to proton transport.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Synthesis of monodisperse high entropy alloy nanocatalysts from core@shell nanoparticles

We report that high-entropy alloy (HEA) nanoparticles (NPs) hold great promise in electrocatalysis because of their nearly unlimited compositions, tailorable active sites, and high durability. However, the synthesis of these compositionally complex structures as monodisperse NPs remains a challenge by colloidal routes because the different rates of metal precursor reduction lead to phase separation. Here, we report the conversion of core@shell NPs into HEA NPs through annealing, with conservation of sample monodispersity. This potentially general route for high-quality HEA NPs was demonstrated by preparing PdCu@PtNiCo NPs via seed-mediated co-reduction, wherein Pt, Ni, and Co were co-deposited on PdCu seeds in solution. These multimetallic NPs were then converted to single-crystalline and single-phase PdCuPtNiCo NPs through annealing. On account of their small particle size, highly dispersed Pt/Pd content, and low elemental diffusivity, these HEA NPs were found to be a highly efficient and durable catalyst for the oxygen reduction reaction. They were also highly selective for the four-electron transfer pathway. We expect that this new synthetic strategy will facilitate the synthesis of new HEA NPs for catalysis and other applications.

36 MATERIALS SCIENCE↗