Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “optimization for fusion”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14

Direct stellarator coil optimization for nested magnetic surfaces with precise quasi-symmetry

We present a robust optimization algorithm for the design of electromagnetic coils that generate vacuum magnetic fields with nested flux surfaces and precise quasi-symmetry. The method is based on a bilevel optimization problem, where the outer coil optimization is constrained by a set of inner least squares optimization problems whose solutions describe magnetic surfaces. The outer optimization objective targets coils that generate a field with nested magnetic surfaces and good quasi-symmetry. The inner optimization problems identify magnetic surfaces when they exist, and approximate surfaces in the presence of magnetic islands or chaos. We show that this formulation can be used to heal islands and chaos, thus producing coils that result in magnetic fields with precise quasi-symmetry. We show that the method can be initialized with coils from the traditional two-stage coil design process, as well as coils from a near-axis expansion optimization. We present a numerical example where island chains are healed and quasi-symmetry is optimized up to surfaces with aspect ratio 6. Another numerical example illustrates that the aspect ratio of nested flux surfaces with optimized quasi-symmetry can be decreased from 6 to approximately 4. In conclusion, the last example shows that our approach is robust and a cold-start using coils from a near-axis expansion optimization.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Efficient Optimization of Plasma Radiation Detector Configurations using Imperfect Inference Models

The configurations of instruments fielded on an experiment affect the amount of information captured and the quality of subsequent inference. Here, we investigate the problem of optimizing plasma x-ray radiation detectors in a magneto-inertial fusion experiment at Sandia National Laboratories. It is impossible to directly measure properties such as the temperature of the thermonuclear fusion plasma produced in these experiments because of the extreme environment and destructive nature of the experiment. Among other diagnostics, several detectors are placed with significant standoff from the fusion target to capture the x-rays emitted by the fusion plasma, which can be used to infer some of its properties. To optimize the configuration of these detectors, a high-fidelity model (HFM) is used for simulating outputs and a low-fidelity model (LFM) is used for inference. We develop methods based on A- and L-optimality criteria that are efficient to compute while explicitly accounting for the discrepancy between the HFM and the LFM. The method allows us to find detector configurations that perform similarly to or better than the configuration obtained using an existing sampling-based optimization method while decreasing computational time by a factor of 50. Supplementary materials for this article are available online, including a standardized description of the materials available for reproducing the work.

Bayesian optimization↗

Recrystallization, cracking, and erosion of dispersoid-strengthened tungsten materials during exposure to divertor plasmas

In this study, we investigated the effects of combined intense particle and heat flux exposure on advanced tungsten plasma-facing materials within the DIII-D fusion facility. Our test matrix included two types of dispersoid-strengthened tungsten (containing either 100 nm diameter TiO 2 or Ni particles), along with high-purity polycrystalline tungsten as a reference. This experiment relied on a sample geometry angled at 15° relative to the divertor surface, thereby allowing the surfaces to intercept steady-state perpendicular heat fluxes (q ⟂ ) ranging from 10.1 to 19.6 MW/m 2 . During each shot, the samples were exposed to 42 Hz edge-localized modes (ELMs), allowing us to test the material response to transient heating. We correlated the exposure conditions with extensive post-test surface composition analysis and microscopy to determine how the plasma modified each surface. The angled specimens closest to the strike point received the highest combined heat and particle flux and melted midway through the experiment. EBSD analysis revealed they were completely recrystallized throughout, with an average grain size >100 µm. On the other hand, the specimens that received a lower steady state heat flux survived with more superficial surface damage. Whereas the high-purity polycrystalline tungsten exhibited a higher surface roughness, the dispersoid-strengthened material exhibited more extensive shallow inter-granular cracking. In addition, the surface was depleted of dispersoids following plasma exposure, possibly because of evaporation and/or sputtering. The results described here provide insights into the performance of these materials in a fusion environment which can guide further optimization for use in long-pulse devices.

Kolasinski, Robert D. [Sandia National Laboratorie↗

PM4Stell: A prototype permanent magnet stellarator structure

Permanent magnets provide a possible solution to simplify complicated stellarator coils. Here, a prototype permanent magnet stellarator structure, PM4Stell, has been funded to demonstrate the technical feasibility of using permanent magnets to create the shaping field of a stellarator. Permanent magnets in uniform cubes with three polarization directions will be carefully placed to generate the required magnetic field for a National Compact Stellarator eXperiment-like equilibrium together with planar toroidal field coils. Discrete magnets will be glued together and inserted into a “post-office-box-like” supporting structure. Electromagnetic and structural analyses have been done to validate the design. Error field correction magnets will be used to shim possible error fields. The design efforts of the prototype permanent magnet stellarator structure are discussed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Simulations of edge and SOL turbulence in diverted negative and positive triangularity plasmas

Optimizing the performance of magnetic confinement fusion devices is critical to achieving an attractive fusion reactor design. Negative triangularity (NT) scenarios have been shown to achieve excellent levels of energy confinement, while avoiding edge localized modes. Modeling turbulent transport in the edge and SOL is key in understanding the impact of NT on turbulence and extrapolating the results to future devices and regimes. Previous gyrokinetic turbulence studies have reported beneficial effects of NT across a broad range of parameters. However, most simulations have focused on the inner plasma region, neglecting the impact of NT on the outermost edge. In this work, we investigate the effect of NT in edge and scrape-off layer simulations, including the magnetic X-point and separatrix. For the first time, we employ a multi-fidelity approach, combining global, non-linear gyrokinetic simulations with drift-reduced fluid simulations, to gain a deeper understanding of the underlying physics at play. First-principles simulations using the GENE-X code demonstrate that in comparable NT and PT geometries, similar profiles are achieved, while the turbulent heat flux is reduced by more than 50% in NT. Comparisons with results from the drift-reduced fluid turbulence code GRILLIX suggest that the turbulence is driven by trapped electron modes. The parallel heat flux width on the divertor targets is reduced in NT, primarily due to a lower spreading factor S.

GENE-X↗

Optimal shielding design for minimum materials cost or mass

The mathematical underpinnings of cost optimal radiation shielding designs based on an extension of optimal control theory are presented, a heuristic algorithm to iteratively solve the resulting optimal design equations is suggested, and computational results for a simple test case are discussed. A typical radiation shielding design problem can have infinitely many solutions, all satisfying the problem's specified set of radiation attenuation requirements. Each such design has its own total materials cost. For a design to be optimal, no admissible change in its deployment of shielding materials can result in a lower cost. This applies in particular to very small changes, which can be restated using the calculus of variations as the Euler-Lagrange equations. Furthermore, the associated Hamiltonian function and application of Pontryagin's theorem lead to conditions for a shield to be optimal.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Space fusion energy conversion using a field reversed configuration reactor: A new technical approach for space propulsion and power

The fusion energy conversion design approach, the Field Reversed Configuration (FRC) - when burning deuterium and helium-3, offers a new method and concept for space transportation with high energy demanding programs, like the Manned Mars Mission and planetary science outpost missions require. FRC's will increase safety, reduce costs, and enable new missions by providing a high specific power propulsion system from a high performance fusion engine system that can be optimally designed. By using spacecraft powered by FRC's the space program can fulfill High Energy Space Missions (HESM) in a manner not otherwise possible. FRC's can potentially enable the attainment of high payload mass fractions while doing so within shorter flight times.

Schulze, Norman R.↗

Optimization of direct aging temperature of Ti free grade 300 maraging steel manufactured using laser powder bed fusion (LPBF)

Maraging steels are of interest to the tool and die industry owing to their high strength, toughness and machinability. Additive manufacturing technologies like laser powder bed fusion (LPBF) can result in a paradigm shift in the design of maraging steel tools. Here, the lack of precipitates, in combination with solute segregation and non-equilibrium microstructure in Grade 300 maraging steel fabricated via LPBF makes the steel amenable to strengthening via direct aging post fabrication instead of the conventional solution treatment and aging. In this study we have focused on optimizing the direct aging temperature for a Ti-free Grade 300 maraging steel fabricated via LPBF for two different aging times. Through strain hardening analysis and detailed microstructural characterization, we show that direct aging at a temperature of 440 °C for 6 h resulted in the best strength-ductility combination. Aging samples at a lower temperature or shorter time resulted in no strain hardening prior to necking as a result of lower fraction of reverted austenite, whereas aging samples at a higher temperature resulted in extensive recrystallization of martensite, coarsening of precipitates, and extensive austenite reversion, resulting in softening of the fabricated parts.

36 MATERIALS SCIENCE↗

Reduction of hydrogen content in deuterium plasma with mixed graphite and tungsten divertors in EAST

Reduction of hydrogen content in deuterium-fueled fusion plasmas is important not only to avoid diluting reacting core deuterons but also so as to allow the optimization of hydrogen-minority-heating efficiency in those fusion devices which employ ion-cyclotron-radio-frequency heating systems. In EAST, the amount of hydrogen released from plasma-facing components has been shown to depend strongly on both their composition and their temperature. In this paper, as measured by thermal desorption spectroscopy, the hydrogen inventory in graphite – used in EAST as lower divertor material – has been determined to be >25 times larger than that of tungsten which comprises the upper divertor. This difference in hydrogen inventory is attributed mostly to the intrinsically porous nature of bulk graphite. Thus the main source of hydrogen release into EAST discharges was identified as the graphite tiles used in the lower divertor. The hydrogen content in EAST plasmas were clearly reduced by first employing a high-temperature vacuum baking of all graphite tiles and then renewing a 100–200 μm thick SiC coating before an EAST experimental run campaign. Subsequent active surface conditioning of all wall components with elemental silicon and then with elemental lithium were seem to again reduce the plasma hydrogen content significantly – with lithium proving to be more effective than silicon. Combining these several techniques, H/(H + D) levels as low as ~3% have been achieved in EAST discharges. Additionally, the effects of lithium thickness on H surface implantation and retention has been re-examined semi-quantitatively using data from a previous run campaign. These data suggest that relatively thick Li films coated on the first wall can effectively isolate the rich source of hydrogen stored in the porous bulk of the underlying graphite from the deuterium-fueled plasma so as to minimize hydrogen release. In conclusion, an operational maneuver whereby a diverted plasma is repetitively switched from an upper single null configuration to a lower single null configuration is presented. This switching maneuver has been shown to suppress hydrogen influx into a 35s-long EAST discharge by alternately mitigating the rise in divertor temperature.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Fast ignition inertial fusion energy using laser-driven ion beams

Ion fast ignition (IFI), or fusion fast ignition initiated by a laser-driven ion beam, is a promising path to high-gain inertial fusion energy (IFE). In IFI, cold, dense deuterium-tritium (DT) fuel is first assembled using lasers or pulsed power drivers. Then, a high-power ion beam is focused onto a small volume within the fuel (the hot spot), heating the fuel rapidly to conditions where fusion ignition takes place. Fusion burn in this hot spot propagates to the fuel surrounding the hot spot, leading to burnup of a significant fraction of this fuel and the possibility of high gain (G~100), as needed for inertial fusion energy. IFI uses separate drivers for the two basic elements, fuel compression and ignition, allowing maximum control and optimization of each. On the other hand, conventional laser fusion uses multiple beams of the same driver to compress the fuel and shock-heat its very center to ignite a burn wave. Despite impressive progress in conventional laser fusion, the precise spatial symmetry, temporal pulse shaping and timing required for high gain and IFE remain a serious unmet challenge.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Advancing Fusion with Machine Learning Research Needs Workshop

The pursuit of fusion energy has required extensive experimental and theoretical science activities to develop the knowledge needed that will enable design of successful fusion power plants. Even today, following decades of research in many key areas including plasma physics and material science, much remains to be learned to enable optimization of the tokamak or other paths to fusion energy. Data science methods from the fields of machine learning and artificial intelligence (ML/AI) offer opportunities for enabling or accelerating progress toward the realization of fusion energy by maximizing the amount and usefulness of information extracted from experimental and simulation output data. Jointly supported by the Department of Energy Offices of Fusion Energy Science (FES) and Advanced Scientific Computing Research (ASCR), a workshop was organized to identify Priority Research Opportunities (PRO’s) for application of ML/AI methods to enable accelerated solution of fusion problems. The resulting “Advancing Fusion with Machine Learning Research Needs Workshop,” held in Gaithersburg, MD, April 30 – May 2, 2019, brought together ~ 60 experts in fields spanning fusion science, data science, statistical inference and mathematics, machine learning, and artificial intelligence, along with DOE program managers and technical experts, to identify key PRO’s.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Capsule performance optimization in the National Ignition Campaign

A capsule performance optimization campaign will be conducted at the National Ignition Facility [G. H. Miller et al., Nucl. Fusion 44, 228 (2004)] to substantially increase the probability of ignition by laser-driven hohlraums [J. D. Lindl et al., Phys. Plasmas 11, 339 (2004)]. The campaign will experimentally correct for residual uncertainties in the implosion and hohlraum physics used in our radiation-hydrodynamic computational models before proceeding to cryogenic-layered implosions and ignition attempts. The required tuning techniques using a variety of ignition capsule surrogates have been demonstrated at the OMEGA facility under scaled hohlraum and capsule conditions relevant to the ignition design and shown to meet the required sensitivity and accuracy. In addition, a roll-up of all expected random and systematic uncertainties in setting the key ignition laser and target parameters due to residual measurement, calibration, cross-coupling, surrogacy, and scale-up errors has been derived that meets the required budget.

36 MATERIALS SCIENCE↗

The scoping, design, and plasma physics optimization of the Eos neutron source stellarator

On the path to a fusion pilot plant, Thea Energy plans to build Eos, a sub-breakeven, deuterium-deuterium, beam-target fusion, stellarator neutron source facility for producing tritium and other valuable radioisotopes. In this paper, a set of 1D plasma physics models are coupled and used to design the operating point of the facility and predict performance. At this foundational stage of the design, analytic and approximate models are sufficient to capture the leading-order effects, and fast enough to run in the inner loop of an optimizer. Higher-fidelity analyses will follow. Models of 1D profile-dependent neutral beam stopping, ion beam slowing down, beam-target fusion, electron-ion classical heat transfer, energy confinement (ISS04), beam pressure, beam heating of ions and electrons, beam-beam fusion fraction, and neutral beam injection and gyrotron heating electrical efficiencies are included. A numerical optimizer is used to determine the minimum required facility electric power to generate tritium at a given rate. A potentially advantageous regime is described in which modern precisely-quasisymmetric stellarators, new high-temperature superconductors, ITER-derived neutral beam injection, and new high-frequency gyrotrons enable a suitible target plasma with hot electrons, cold ions, peaked density and temperature profiles, and high beam-injected ion density. It appears possible at this time for a facility with a medium-scale and medium-strength stellarator whose required facility electric power is less than 40 MW to produce $2.5\times 10^{17}$ neutrons s -1 for the production of radioisotopes. With the addition of a tritium breeding blanket, such a facility could produce 0.2 grams d -1 or 70 grams yr -1 of tritium.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Report of the Workshop on Advanced Fusion with Machine Learning, April 30-May 2, 2019

The pursuit of fusion energy has led to extensive activities in both experimental and theoretical science. The central goal of all these activities has been to develop the knowledge necessary for the design of successful fusion power plants. Even today, following decades of research in many key areas including plasma physics and material science, much remains to be learned in order to achieve optimization of the tokamak or other paths to fusion energy. Data science methods from the fields of machine learning and artificial intelligence (ML/AI) offer opportunities for enabling or accelerating progress toward the realization of fusion energy by maximizing the amount and usefulness of information extracted from experimental and simulation output data. From April 30 to May 2 of 2019, a workshop on “Advancing Fusion with Machine Learning Research Needs” was held in Gaithersburg, MD, with joint support from the Fusion Energy Science (FES) and Advanced Scientific Computing Research (ASCR) Programs. The workshop brought together ~ 60 experts in fields spanning fusion science, data science, statistical inference and mathematics, machine learning, and artificial intelligence, along with DOE program managers and technical experts, with the goal of identifying Priority Research Opportunities (PROs) for the application of ML/AI methods to accelerating progress on solving fusion problems. During the workshop, seven key PROs were identified. The description of each PRO includes relevant fusion problems, potentially useful ML/AI approaches, known gaps currently preventing the use of such approaches, and research guidelines to maximize the effective application of ML/AI methods to the PRO. The report containing the full description of the workshop outcomes is available at https://science.osti.gov/-/media/fes/pdf/workshopreports/FES_ASCR_Machine_Learning_Report.pdf

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Approaching hydro-equivalent ignition in laser direct-drive via target design optimization using novel statistical modeling

Laser direct-drive offers significant advantages in terms of target simplicity, improved energy coupling, and large fuel masses over indirect drive. However, performance degradations from hydrodynamic and laser-plasma instabilities seeded and driven by the direct illumination pose limitations on the parameter space available for achieving ignition. In this paper, new design improvements are identified to forge a path forward for a hydro-equivalent ignition demonstration. The first is related to a new formulation of the statistical model (SM) used to accurately predict target performance directly from input parameters such as laser pulse shape and target specifications. This new SM formulation provides direct guidance on target dimensions and laser beam-to-target radius to achieve the highest fusion yield on the OMEGA laser. The second improvement comes from cooling the deuterium–tritium (DT) ice layer below the triple point right before shot time leading to lower DT vapor densities and higher convergence. Guided by these design improvements, a Bayesian optimization algorithm was used to design an implosion that is predicted to closely approach a Lawson triple product that hydrodynamically scales to ignition if equivalent laser–target coupling is achieved at laser energies typical of the National Ignition Facility.

Deuterium↗

Universal method for the optimization of HDC coating uniformity on non-planar, non-stationary substrates for inertial confinement fusion targets

The thickness uniformity of chemical vapor deposited (CVD) diamond coatings on non-planar, non-stationary substrates depends on both the intrinsic instantaneous coating thickness distribution (ICTD) of the coating conditions used and, if applicable, on the frequency of substrate reorientation. While important for many CVD diamond applications, the relative impact of the ICTD and substrate reorientation on the coating thickness uniformity has not been studied. In this work, we systematically investigate the effect of these factors for microwave-plasma chemical vapor deposition (MPCVD) of diamond (referred to as high density carbon (HDC) in the inertial confinement fusion (ICF) community) coatings on spherical, rolling substrates. This coating technique is used to fabricate capsules for ICF experiments, which require extreme coating uniformity with <0.3 % thickness variation (so-called Mode 1 or M1) to ensure symmetric compression of imploding targets. To extract the otherwise unobservable reorientation timescale (Δt), Monte Carlo simulations were performed using experimental ICTD data as input. This combined approach confirms scaling relationships between the substrate reorientation timescale as well as coating thickness and coating uniformity, as expected from a 3D random walk. Simulations confirm that M1 is Rayleigh-distributed and scales as (Δt) 1/2 , consistent with the randomization of two angles that determine orientation of a sphere. We also demonstrate that, under the conditions studied, Δt is the dominant factor in determining thickness uniformity while the intrinsic ICTD has minimal impact. Finally, experiments show that Δt can be affected by total batch size under constant agitation conditions due to space constraints that limit the capsule reorientation kinetics. In conclusion, this study highlights the utility of a combined experiment-simulation approach as a general methodology for understanding and improving coating uniformity on non-planar, non-stationary substrates.

Capsule↗

Development of an inertial confinement fusion platform to study charged particle-producing nuclear reactions relevant to nuclear astrophysics

This paper describes the development of a platform to study astrophysically relevant nuclear reactions using inertial-confinement fusion implosions on the OMEGA and NIF laser facilities, with a particular focus on optimizing the implosions to study charged-particle-producing reactions. Primary requirements on the platform are high yield, for high statistics in the fusion product measurements, combined with low areal density, to allow the charged fusion products to escape. This is optimally achieved with direct-drive exploding pusher implosions using thin-glass-shell capsules. Mitigation strategies to eliminate a possible target sheath potential which would accelerate the emitted ions are discussed. The potential impact of kinetic effects on the implosions is also considered. The platform is initially employed to study the complementary T(t,2n)??, T(3He,np)?? and 3He(3He,2p)?? reactions. Proof-of-principle results from the first experiments demonstrating the ability to accurately measure the energy and yields of charged particles are presented. Lessons learned from these experiments will be used in studies of other reactions. The goals are to explore thermonuclear reaction rates and fundamental nuclear physics in stellar-like plasma environments, and to push this new frontier of nuclear astrophysics into unique regimes not reachable through existing platforms, with thermal ion velocity distributions, plasma screening and low reactant energies.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗