Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “optical interference”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14

Polarization spectroscopy of dressed four-wave mixing in a three-level atomic system

Polarization properties of pure four-wave mixing (FWM) and dressed-FWM processes in a two-level system and a cascade three-level atomic system are theoretically and experimentally investigated. The relative intensities and polarization characteristics of the FWM signals in different laser polarization configurations and different level systems are experimentally investigated and compared. Also, the results are theoretically explained by different transition paths combinations. In the dressed-FWM processes, we study the dependence of dressing effect on the incident field's polarization. The FWM signal generated by a linearly polarized pumping field is suppressed more by the dressing field than the one generated by a circularly polarized pumping field. However, an opposite effect was observed when the probe field's polarization is changed. The multidressing mechanisms are used to explain these effects. In addition, the interference and polarization dependence of the coexisting FWM signals in the same atomic system are discussed.

74 ATOMIC AND MOLECULAR PHYSICS↗

Double scattering of light from Biophotonic Nanostructures with short-range order

We investigate the physical mechanism for color production by isotropic nanostructures with short-range order in bird feather barbs. While the primary peak in optical scattering spectra results from constructive interference of singly-scattered light, many species exhibit secondary peaks with distinct characteristic. Our experimental and numerical studies show that these secondary peaks result from double scattering of light by the correlated structures. Without an analog in periodic or random structures, such a phenomenon is unique for short-range ordered structures, and has been widely used by nature for non-iridescent structural coloration.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Trehalase Regulates Neuroepithelial Stem Cell Maintenance and Differentiation in the Drosophila Optic Lobe

As one of the major hydrolases in Drosophila, trehalase (Treh) catalyzes the hydrolysis of trehalose into glucose providing energy for flight muscle activity. Treh is highly conserved from bacteria to humans, but little is known about its function during animal development. Here, we analyze the function of Treh in Drosophila optic lobe development. In the optic lobe, neuroepithelial cells (NEs) first divide symmetrically to expand the stem cell pool and then differentiate into neuroblasts, which divide asymmetrically to generate medulla neurons. We find that the knockdown of Treh leads to a loss of the lamina and a smaller medulla. Analyses of Treh RNAi-expressing clones and loss-of-function mutants indicate that the lamina and medulla phenotypes result from neuroepithelial disintegration and premature differentiation into medulla neuroblasts. Although the principal role of Treh is to generate glucose, the Treh loss-of-function phenotype cannot be rescued by exogenous glucose. Thus, our results indicate that in addition to being a hydrolase, Treh plays a role in neuroepithelial stem cell maintenance and differentiation during Drosophila optic lobe development.

59 BASIC BIOLOGICAL SCIENCES↗

System and method for ultrafast optical signal detecting via a synchronously coupled anamorphic light pulse encoded laterally

In one general embodiment, a method for ultrafast optical signal detecting is provided. In operation, a first optical input signal is propagated through a first wave guiding layer of a waveguide. Additionally, a second optical input signal is propagated through a second wave guiding layer of the waveguide. Furthermore, an optical control signal is applied to a top of the waveguide, the optical control signal being oriented diagonally relative to the top of the waveguide such that the application is used to influence at least a portion of the first optical input signal propagating through the first wave guiding layer of the waveguide. In addition, the first and the second optical input signals output from the waveguide are combined. Further, the combined optical signals output from the waveguide are detected. In another general embodiment, a system for ultrafast optical signal recording is provided comprising a waveguide including a plurality of wave guiding layers, an optical control source positioned to propagate an optical control signal towards the waveguide in a diagonal orientation relative to a top of the waveguide, at least one optical input source positioned to input an optical input signal into at least a first and a second wave guiding layer of the waveguide, and a detector for detecting at least one interference pattern output from the waveguide, where at least one of the interference patterns results from a combination of the optical input signals input into the first and the second wave guiding layer. Furthermore, propagation of the optical control signal is used to influence at least a portion of the optical input signal propagating through the first wave guiding layer of the waveguide.

47 OTHER INSTRUMENTATION↗

Contrast analysis in two-beam laser interference lithography

Interference lithography enables large area, sub-µm, periodic patterning without photomasks or projection lithography tools. We show that optical contrast, which is the fundamental design variable of interference lithography, enforces coupled constraints on source coherence, beam pointing stability, field size, polarization state, and the intensity balance between beams. The analysis enables selection and alignment tolerance of components to meet a specific design requirement. In particular, the analysis reveals that grating beam splitters are significantly less sensitive to beam pointing and polarization misalignment than plate beam splitters.

Miller, David B. (ORCID:0000000207755284)↗

Measurement of the surface profile of an axicon lens with a polarization phase-shifting shearing interferometer

We present a Twyman-Green interferometer (TGI)-based polarization phase-shifting shearing interferometric technique for testing the conical surface of an axicon (AX) lens. In this technique, the annular beam generated due to the passing of an expanded collimated laser beam traveling along the axis of revolution of the transparent glass AX element is split up into its reflected and transmitted components, having the plane of polarization in the orthogonal planes, by the polarization beam splitter (PBS) cube of the TGI-based optical setup. The split-up components are made to travel unequal paths along the two arms of the TGI and are recombined by the PBS. Because of the difference in path lengths traveled by the annular conical beams, a linear shear is introduced along the radial direction between the interfering components. Thus, the resulting interference pattern gives a map of the optical path difference (OPD) between two successive close points along a radial direction on the conical surface of the AX lens. The OPD map along radial directions, and hence the slopes/profiles of the conical surface, are obtained by applying polarization phase-shifting interferometry. Results obtained for an AX lens are presented.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Real-time detection and elimination of nonorthogonality error in interference fringe processing

In the measurement system of interference fringe, the nonorthogonality error is a main error source that influences the precision and accuracy of the measurement system. The detection and elimination of the error has been an important target. A novel method that only uses the cross-zero detection and the counting is proposed to detect and eliminate the nonorthogonality error in real time. This method can be simply realized by means of the digital logic device, because it does not invoke trigonometric functions and inverse trigonometric functions. And it can be widely used in the bidirectional subdivision systems of a Moire fringe and other optical instruments.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Photosensitive response of azobenzene containing films towards pure intensity or polarization interference patterns

In this paper, we report on differences in the response of photosensitive azobenzene containing films upon irradiation with the intensity or polarization interference patterns. Two materials are studied differing in the molecular weight: an azobenzene-containing polymer and a molecular glass formed from a much smaller molecule consisting of three connected azobenzene units. Topography changes occurring along with the changes in irradiation conditions are recorded using a homemade set-up combining an optical part for generation and shaping of interference patterns and an atomic force microscope for acquiring the kinetics of film deformation. In this way, we could reveal the unique behavior of photosensitive materials during the first few minutes of irradiation: the change in topography is initially driven by an increase in the azobenzene free volume along with the trans-cis isomerization, followed by the mass transport finally resulting in the surface relief grating. This study demonstrates the great potential of our setup to experimentally highlight puzzling processes governing the formation of surface relief gratings.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Band-engineered SrTiO{sub 3} nanowires for visible light photocatalysis

We have theoretically investigated the structural, electronic, and optical properties of perovskite SrTiO{sub 3} nanowires for use in visible light photocatalytic applications using pseudopotential density-functional theory calculations. The electronic structure calculations show that the band gap is modified in the SrTiO{sub 3} nanowires compared with that of the bulk. For TiO{sub 2}-terminated nanowires, the mid-band states induced by the combination of oxygen and strontium atoms on the surface lead to a shift in the valence band toward the conduction band without interference from the edge of the conduction band, which reduces the band gap. On the contrary, the electronic states induced by the combination of oxygen and strontium atoms on the surface of SrO-terminated nanowires lead to a shift in the conduction band toward the valence band. The calculated optical results indicate that the absorption edge of the nanowires shift towards the red-light region. These theoretical results suggest that perovskite SrTiO{sub 3} nanowires are promising candidates for use in visible light photocatalytic processes such as solar-assisted water splitting reactions.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Calibration of Distributed Temperature Sensors Using Commercially Available SMF-28 Optical Fiber From 22 °C to 1000 °C

Optical frequency domain reflectometry (OFDR) is a family of optical techniques which can be used to produce distributed temperature measurements from the spectral shift of an interference pattern based on the Rayleigh backscatter signature of an optical fiber. Adaptive signal processing techniques have recently been used with OFDR to record meaningful spectral shift data from commercially available SMF-28 optical fibers heated beyond 950 °C. Furthermore, a correlation between the measured spectral shift and temperature has not yet been developed at these high temperatures. To extend the measurable temperature range of OFDR in SMF-28, this work describes the development of such a correlation from room temperature (22 °C) to 1000 °C. The relationship between spectral shift and temperature change over this range was found to be best characterized by the fourth-order polynomial ΔT=(-4.241 * 10 -11 )S 4 + (-2.017 * 10 -7 )S 3 + (-3.677 * 10 -4 )S 2 + (-0.8057)S, where ΔT represents the temperature difference compared to the reference temperature, and S represents the spectral shift measured by the fibers. The calibration developed in this work assumes that the fiber has been fully annealed by heating the fiber to 1000 °C for a few hours. This paper is the first to demonstrate the calibration and use of SMF-28 distributed optical fiber sensors up to 1000 °C, enabled using adaptive OFDR-based signal processing.

47 OTHER INSTRUMENTATION↗

Ultrasonic power measurement system based on acousto-optic interaction

Ultrasonic waves are widely used, with applications including the medical, military, and chemical fields. However, there are currently no effective methods for ultrasonic power measurement. Previously, ultrasonic power measurement has been reliant on mechanical methods such as hydrophones and radiation force balances. This paper deals with ultrasonic power measurement based on an unconventional method: acousto-optic interaction. Compared with mechanical methods, the optical method has a greater ability to resist interference and also has reduced environmental requirements. Therefore, this paper begins with an experimental determination of the acoustic power in water contained in a glass tank using a set of optical devices. Because the light intensity of the diffraction image generated by acousto-optic interaction contains the required ultrasonic power information, specific software was written to extract the light intensity information from the image through a combination of filtering, binarization, contour extraction, and other image processing operations. The power value can then be obtained rapidly by processing the diffraction image using a computer. The results of this work show that the optical method offers advantages that include accuracy, speed, and a noncontact measurement method.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Structure of whispering-gallery modes in optical microdisks perturbed by nanoparticles

It is a well-known fact that a single nanoparticle placed in the evanescent field of an optical microdisk leads to coherent backscattering of light between counterpropagating whispering-gallery modes. This backscattering lifts the spectral degeneracy giving rise to a doublet of standing-wave modes. Here, we show that the evanescent coupling of two or more nanoparticles leads in general to asymmetric backscattering (i.e., the strength of the scattering of light from the clockwise to the counterclockwise propagation direction is different than the other way around). Even if the strength of the backscattering is weak its asymmetry can have a dramatic impact on the mode structure. In the regime of overlapping resonances the modes do not have a standing-wave character. Instead nonorthogonal pairs of mainly copropagating modes are formed. In the extreme case the pair of optical modes coalesce at a so-called exceptional point. We derive an effective Hamiltonian within a two-mode approximation which reveals that this unexpected behavior is due to interference of the scattered waves which can be destructive or constructive depending on the propagation direction of the light.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

High frequency lithium niobate film-thickness-mode optomechanical resonator

High-frequency optomechanical resonators are in demand as transduction devices to bridge microwave and optical fields. Thin-film lithium niobate is a promising platform for implementing high-frequency optomechanics for its low optical loss and strong piezoelectric coefficients. However, its strong piezoelectricity is also known to introduce excess phonon loss. Here, we present lithium niobate optomechanical resonators with film-thickness-mode mechanical resonances up to 5.2 GHz, reaching the operating frequency regime of superconducting qubits. By engineering the mechanical anchor to minimize the phonon loss, we achieve a high quality factor up to 12 500 at cryogenic temperatures and, hence, a frequency-quality factor product of 6.6 × 10 13 . Our system also features interference between piezo-optomechanical and electro-optic modulation. A theoretical model is derived to analyze these two effects and their interference.

42 ENGINEERING↗

An Adaptive Reference Scheme to Extend the Functional Range of Optical Backscatter Reflectometry in Extreme Environments

Optical frequency domain reflectometry (OFDR) measurements are performed by recording the interference pattern of light backscattered by density fluctuations or Bragg gratings along the length of an optical fiber. Changes in local temperature or strain in the fiber cause shifts in the backscattered light spectrum, which can be calibrated to the applied temperature or strain. Comparing the backscattered optical spectra from each reflection site with a reference (unstrained) spectrum allows for quantification of local spectral shifts. While mature OFDR-based technologies can provide high-precision spatially distributed measurements over kilometer lengths, the post-processing approaches used to recover spectral shifts from raw optical intensity data can limit the use of OFDR in harsh environments. This paper presents a novel approach to post-processing OFDR data which extends the usability of optical fibers exposed to harsh environments. This approach is the first to use the spectral shift quality, calculated for two OFDR measurements, to identify an appropriate reference scan from which the spectral shift can be determined. Here, three experimental data sets are used to test the algorithm: (1) an optical fiber heated to >950°C, (2) an aluminum-embedded optical fiber under strain from differential thermal expansion, and (3) an optical fiber exposed to a total neutron flux of 2×10 13 n/cm 2 /s over 40 hours in a nuclear test reactor. Results show that using a metric of quality to select an appropriate reference measurement extends the functional range of OFDR strain and temperature sensors. Furthermore, this algorithm can be applied to existing OFDR data.

47 OTHER INSTRUMENTATION↗

Development of a flexible optical fiber based high resolution integrated PET/MRI system

Purpose: The simultaneous measurement of PET and magnetic resonance imaging (MRI) is an emerging field for molecular imaging research. Although optical fiber based PET/MRI systems have advantages on less interference between PET and MRI, there is a drawback in reducing the scintillation light due to the fiber. To reduce the problem, the authors newly developed flexible optical fiber bundle based block detectors and employed them for a high resolution integrated PET/MRI system. Methods: The flexible optical fiber bundle used 0.5 mm diameter, 80 cm long double clad fibers which have dual 12 mm Multiplication-Sign 24 mm rectangular inputs and a single 24 mm Multiplication-Sign 24 mm rectangular output. In the input surface, LGSO scintillators of 0.025 mol.% (decay time: {approx}31 ns: 0.9 mm Multiplication-Sign 1.3 mm Multiplication-Sign 5 mm) and 0.75 mol.% (decay time: {approx}46 ns: 0.9 mm Multiplication-Sign 1.3 mm Multiplication-Sign 6 mm) were optically coupled in depth direction to form depth-of-interaction detector, arranged in 11 Multiplication-Sign 13 matrix and optically coupled to the fiber bundle. The two inputs of the bundle are bent for 90 Degree-Sign , bound to one, and are optically coupled to a Hamamatsu 1-in. square position sensitive photomultiplier tube. Results: Light loss due to the fiber bundle could be reduced and the performance of the block detectors was improved. Eight optical fiber based block detectors (16 LGSO blocks) were arranged in a 56 mm diameter ring to form a PET system. Spatial resolution and sensitivity were 1.2 mm full-width at half-maximum and 1.2% at the central field-of-view, respectively. Sensitivity change was less than 1% for 2 Degree-Sign C temperature changes. This PET system was integrated with a 0.3 T permanent magnet MRI system which has 17 cm diameter hole at the yoke area for insertion of the PET detector ring. There was no observable interference between PET and MRI. Simultaneous imaging of PET and MRI was successfully performed for small animal studies. Conclusions: The authors confirmed that the developed high resolution PET/MRI system is promising for molecular imaging research.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Dispersion and guidance characteristics of microstructured 68TeO{sub 2} - 22WO{sub 3} - 8La{sub 2}O{sub 3} - 2Bi{sub 2}O{sub 3} glass fibres for supercontinuum generation

We report the preparation of a high-purity optical-quality four-component glass of composition 68TeO{sub 2} - 22WO{sub 3} - 8La{sub 2}O{sub 3} - 2Bi{sub 2}O{sub 3}, containing (2.7{+-}0.5)x10{sup -5} mol % OH groups. Its refractive index has been determined in the range 0.9 - 5.45 {mu}m using interference refractometry. The data are used to assess the dispersion and guidance characteristics of microstructured optical fibres potentially attractive for supercontinuum generation in the range 1 - 5 {mu}m (optical fibres)

36 MATERIALS SCIENCE↗

Efficient collection of single photons emitted from a trapped ion into a single-mode fiber for scalable quantum-information processing

Interference and coincidence detection of two photons emitted by two remote ions can lead to an entangled state, which is a critical resource for scalable quantum-information processing. Currently the success probabilities of experimental realizations of this protocol are mainly limited by low coupling efficiency of a photon emitted by an ion into a single-mode fiber. Here we consider two strategies to enhance the collection probability of a photon emitted from a trapped Yb{sup +} ion, using analytic methods that can be easily applied to other types of ions or neutral atoms. Our analysis shows that we can achieve fiber coupling efficiency of over 30% with an optical cavity made of a flat fiber tip and a spherical mirror. We also investigate ways to increase the fiber coupling efficiency using high-numerical-aperture optics, and show that collection probability of over 15% is possible with proper control of aberration.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Optomechanical design of a prompt gamma reaction history diagnostic

The National Ignition Facility and the Omega Laser Facility both have a need for measuring prompt gamma radiation as part of a nuclear diagnostic program. A new gamma-detection diagnostic using off-axis-parabolic mirrors has been built. Some new techniques were used in the design, construction, and tolerancing of this gamma ray diagnostic. Because of the wavelength requirement (250 to 700 nm), the optical element surface finishes were a key design consideration. The optical enclosure had to satisfy pressure safety concerns and shielding against electromagnetic interference induced by gammas and neutrons. Structural finite element analysis was needed to meet rigorous optical and safety requirements. The optomechanical design is presented. Alignment issues are also discussed.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗