Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “numerical solver”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14

Propulsion System Simulation Using the Toolbox for the Modeling and Analysis of Thermodynamic Systems (T-MATS)

A simulation toolbox has been developed for the creation of both steady-state and dynamic thermodynamic software models. This paper describes the Toolbox for the Modeling and Analysis of Thermodynamic Systems (T-MATS), which combines generic thermodynamic and controls modeling libraries with a numerical iterative solver to create a framework for the development of thermodynamic system simulations, such as gas turbine engines. The objective of this paper is to present an overview of T-MATS, the theory used in the creation of the module sets, and a possible propulsion simulation architecture. A model comparison was conducted by matching steady-state performance results from a T-MATS developed gas turbine simulation to a well-documented steady-state simulation. Transient modeling capabilities are then demonstrated when the steady-state T-MATS model is updated to run dynamically.

aerothermodynamics↗

History and Status of the CDISC Aerodynamic Design Method

This paper will review the development and application of the CDISC aerodynamic design method that began in the early 1980s and continues in active use today. The method uses an iterative, knowledge-based approach that has been coupled with numerous flow solvers utilizing a variety of grid types and levels of flow physics. It has been applied to configurations varying in complexity from 2-D airfoils to full 3-D aircraft at flow conditions ranging from low-speed, high-lift to supersonic cruise. The knowledge-based approach provides a very rapid design process, with designs typically completed in approximately 1-2x the time required for an initial converged analysis of the baseline. The evolution of the method as it tracked the expansive growth of grid and flow solver technology, along with some major applications over 5 decades, are given, followed by a description of the philosophy and process used in design. Finally, an example of its use in a preliminary design environment is given.

CDISC↗

History and Status of the CDISC Aerodynamic Design Method

This paper will review the development and application of the CDISC aerodynamic design method that began in the early 1980s and continues in active use today. The method uses an iterative, knowledge-based approach that has been coupled with numerous flow solvers utilizing a variety of grid types and levels of flow physics. It has been applied to configurations varying in complexity from 2-D airfoils to full 3-D aircraft at flow conditions ranging from low-speed, high-lift to supersonic cruise. The knowledge-based approach provides a very rapid design process, with designs typically completed in approximately 1-2x the time required for an initial converged analysis of the baseline. The evolution of the method as it tracked the expansive growth of grid and flow solver technology, along with some major applications over 5 decades, are given, followed by a description of the philosophy and process used in design. Finally, an example of its use in a preliminary design environment is given.

CDISC↗

Controlling the numerical Cerenkov instability in PIC simulations using a customized finite difference Maxwell solver and a local FFT based current correction

In this study we present a customized finite-difference-time-domain (FDTD) Maxwell solver for the particle-in-cell (PIC) algorithm. The solver is customized to effectively eliminate the numerical Cerenkov instability (NCI) which arises when a plasma (neutral or non-neutral) relativistically drifts on a grid when using the PIC algorithm. We control the EM dispersion curve in the direction of the plasma drift of a FDTD Maxwell solver by using a customized higher order finite difference operator for the spatial derivative along the direction of the drift (1ˆ direction). We show that this eliminates the main NCI modes with moderate |k 1 |, while keeps additional main NCI modes well outside the range of physical interest with higher |k 1 |. These main NCI modes can be easily filtered out along with first spatial aliasing NCI modes which are also at the edge of the fundamental Brillouin zone. The customized solver has the possible advantage of improved parallel scalability because it can be easily partitioned along 1ˆ which typically has many more cells than other directions for the problems of interest. We show that FFTs can be performed locally to current on each partition to filter out the main and first spatial aliasing NCI modes, and to correct the current so that it satisfies the continuity equation for the customized spatial derivative. This ensures that Gauss’ Law is satisfied. Lastly, we present simulation examples of one relativistically drifting plasma, of two colliding relativistically drifting plasmas, and of nonlinear laser wakefield acceleration (LWFA) in a Lorentz boosted frame that show no evidence of the NCI can be observed when using this customized Maxwell solver together with its NCI elimination scheme.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Direct Numerical Simulation of Transitional and Turbulent Flows Over Multi-Scale Surface Roughness—Part II: The Effect of Roughness on the Performance of a High-Pressure Turbine Blade

Abstract Turbine blades generally present surface roughness introduced in the manufacturing process or caused by in-service degradation, which can have a significant impact on aero-thermal performance. A better understanding of the fundamental physical mechanisms arising from the interaction between the roughness and the turbine flow at engine-relevant conditions can provide insights for the design of blades with improved efficiency and longer operational life. To this end, a high-fidelity numerical framework combining a well-validated solver for direct numerical simulation and a second-order accurate immersed boundary method is employed to predict roughness-induced aero-thermal effects on an LS89 high-pressure turbine (HPT) blade at engine-relevant conditions. Different amplitudes and distributions of surface roughness are investigated and a reference smooth-blade simulation under the same flow conditions is conducted for comparison. Roughness of increasing amplitude progressively shifts the blade suction side boundary layer transition upstream, producing larger values of the turbulent kinetic energy and higher total wake losses. The on-surface data-capturing capabilities of the numerical framework provide direct measurements of the heat flux and the skin friction coefficient, hence offering quantitative information between the surface topology and engineering-relevant performance parameters. This work may provide a benchmark for future numerical studies of turbomachinery flows with roughness.

Engineering↗

Automated Detection of Instability-Inducing Channel Geometry Transitions in Saint-Venant Simulation of Large-Scale River Networks

A new sweep-search algorithm (SSA) is developed and tested to identify the channel geometry transitions responsible for numerical convergence failure in a Saint-Venant equation (SVE) simulation of a large-scale open-channel network. Numerical instabilities are known to occur at “sharp” transitions in discrete geometry, but the identification of problem locations has been a matter of modeler’s art and a roadblock to implementing large-scale SVE simulations. The new method implements techniques from graph theory applied to a steady-state 1D shallow-water equation solver to recursively examine the numerical stability of each flowpath through the channel network. The SSA is validated with a short river reach and tested by the simulation of ten complete river systems of the Texas–Gulf Coast region by using the extreme hydrological conditions recorded during hurricane Harvey. The SSA successfully identified the problematic channel sections in all tested river systems. Subsequent modification of the problem sections allowed stable solution by an unsteady SVE numerical solver. The new SSA approach permits automated and consistent identification of problem channel geometry in large open-channel network data sets, which is necessary to effectively apply the fully dynamic Saint-Venant equations to large-scale river networks or for city-wide stormwater networks.

54 ENVIRONMENTAL SCIENCES↗

Differentiating Hund from Mott physics in a three-band Hubbard-Hund model: Temperature dependence of spectral, transport, and thermodynamic properties

We study the interplay between Mott physics, driven by Coulomb repulsion U, and Hund physics, driven by Hund's coupling J, for a minimal model for Hund metals, the orbital-symmetric three-band Hubbard-Hund model (3HHM) for a lattice filling of 1/3. Hund-correlated metals are characterized by spin-orbital separation (SOS), a Hund's-rule-induced two-stage Kondo-type screening process, in which spin screening occurs at much lower energy scales than orbital screening. By contrast, in Mott-correlated metals, lying close to the phase boundary of a metal-insulator transition, the SOS window becomes negligibly small and the Hubbard bands are well separated. Using dynamical mean-field theory and the numerical renormalization group as real-frequency impurity solver, we identify numerous fingerprints distinguishing Hundness from Mottness in the temperature dependence of various physical quantities. Furthermore, These include ARPES-type spectra, the local self-energy, static local orbital and spin susceptibilities, resistivity, thermopower, and lattice and impurity entropies. Our detailed description of the behavior of these quantities within the context of a simple model Hamiltonian will be helpful for distinguishing Hundness from Mottness in experimental and theoretical studies of real materials.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Massively parallel solvers for elliptic partial differential equations in numerical weather and climate prediction

The demand for substantial increases in the spatial resolution of global weather and climate prediction models makes it essential to use numerically efficient and highly scalable algorithms to solve the equations of large-scale atmospheric fluid dynamics. For stability and efficiency reasons, several of the operational forecasting centres, in particular the Met Office and the European Centre for Medium-Range Weather Forecasts (ECMWF) in the UK, use semi-implicit semi-Lagrangian time-stepping in the dynamical core of the model. The additional burden with this method is that a three-dimensional elliptic partial differential equation (PDE) for the pressure correction has to be solved at every model time step and this often constitutes a significant proportion of the time spent in the dynamical core. In global models, this PDE must be solved in a thin spherical shell. To run within tight operational time-scales, the solver has to be parallelized and there seems to be a (perceived) misconception that elliptic solvers do not scale to large processor counts and hence implicit time-stepping cannot be used in very high-resolution global models. After reviewing several methods for solving the elliptic PDE for the pressure correction and their application in atmospheric models, we demonstrate the performance and very good scalability of Krylov subspace solvers and multigrid algorithms for a representative model equation with more than 1010 unknowns on 65 536 cores on the High-End Computing Terascale Resource (HECToR), the UK's national supercomputer. Here, we tested and optimized solvers from two existing numerical libraries (the Distributed and Unified Numerics Environment (DUNE) and Parallel High Performance Preconditioners (hypre)) and implemented both a conjugate gradient solver and a geometric multigrid algorithm based on a tensor-product approach, which exploits the strong vertical anisotropy of the discretized equation. We study both weak and strong scalability and compare the absolute solution times for all methods; in contrast to one-level methods, the multigrid solver is robust with respect to parameter variations.

58 GEOSCIENCES↗

Analytical Modeling of a Novel Transverse Flux Machine for Direct Drive Wind Turbine Applications

This paper presents a nonlinear analytical model of a novel double sided flux concentrating Transverse Flux Machine (TFM) based on the Magnetic Equivalent Circuit (MEC) model. The analytical model uses a series-parallel combination of flux tubes to predict the flux paths through different parts of the machine including air gaps, permanent magnets (PM), stator, and rotor. The two-dimensional MEC model approximates the complex three-dimensional flux paths of the TFM and includes the effects of magnetic saturation. The model is capable of adapting to any geometry which makes it a good alternative for evaluating prospective designs of TFM as compared to finite element solvers which are numerically intensive and require more computation time. A single phase, 1 kW, 400 rpm machine is analytically modeled and its resulting flux distribution, no-load EMF and torque, verified with Finite Element Analysis (FEA). The results are found to be in agreement with less than 5% error, while reducing the computation time by 25 times.

17 WIND ENERGY↗

Differentiable programming for online training of a neural artificial viscosity function within a staggered grid Lagrangian hydrodynamics scheme

Lagrangian methods to solve the inviscid Euler equations produce numerical oscillations near shock waves. A common approach to reducing these oscillations is to add artificial viscosity (AV) to the discrete equations. The AV term acts as a dissipative mechanism that attenuates oscillations by smearing the shock across a finite number of computational cells. However, AV introduces several control parameters that are not determined by the underlying physical model, and hence, in practice are tuned to the characteristics of a given problem. We seek to improve the standard quadratic-linear AV form by replacing it with a learned neural function that reduces oscillations relative to exact solutions of the Euler equations, resulting in a hybrid numerical-neural hydrodynamic solver. Because AV is an artificial construct that exists solely to improve the numerical properties of a hydrodynamic code, there is no offline ‘viscosity data’ against which a neural network can be trained before inserting into a numerical simulation, thus requiring online training. We achieve this via differentiable programming, i.e. end-to-end backpropagation or adjoint solution through both the neural and differential equation code, using automatic differentiation of the hybrid code in the Julia programming language to calculate the necessary loss function gradients. A novel offline pre-training step accelerates training by initializing the neural network to the default numerical AV scheme, which can be learned rapidly by space-filling sampling over the AV input space. We find that online training over early time steps of simulation is sufficient to learn a neural AV function that reduces numerical oscillations in long-term hydrodynamic shock simulations. These results offer an early proof-of-principle that online differentiable training of hybrid numerical schemes with novel neural network components can improve certain performance aspects existing in purely numerical schemes.

97 MATHEMATICS AND COMPUTING↗

KiT-RT: An Extendable Framework for Radiative Transfer and Therapy

Here, in this article, we present Kinetic Transport Solver for Radiation Therapy (KiT-RT), an open-source C++-based framework for solving kinetic equations in therapy applications available at https://github.com/CSMMLab/KiT-RT . This software framework aims to provide a collection of classical deterministic solvers for unstructured meshes that allow for easy extendability. Therefore, KiT-RT is a convenient base to test new numerical methods in various applications and compare them against conventional solvers. The implementation includes spherical harmonics, minimal entropy, neural minimal entropy, and discrete ordinates methods. Solution characteristics and efficiency are presented through several test cases ranging from radiation transport to electron radiation therapy. Due to the variety of included numerical methods and easy extendability, the presented open-source code is attractive for both developers, who want a basis to build their numerical solvers, and users or application engineers, who want to gain experimental insights without directly interfering with the codebase.

97 MATHEMATICS AND COMPUTING↗

Narrow operator models of stellarator equilibria in Fourier Zernike basis

Numerical computation of the ideal magnetohydrodynamic (MHD) equilibrium magnetic field is at the base of stellarator optimisation and provides the starting point for solving more sophisticated partial differential equations like transport or turbulence models. Conventional approaches solve for a single stationary point of the ideal MHD equations, which is fully defined by three invariants and the numerical scheme employed by the solver. We present the first numerical approach that can solve for a continuous distribution of equilibria with fixed boundary and rotational transform, varying only the pressure invariant. This approach minimises the force residual by optimising parameters of multilayer perceptrons that map from a scalar pressure multiplier to the Fourier Zernike basis as implemented in the modern stellarator equilibrium solver DESC.

fusion plasma↗

An analysis of supersonic flows with low-Reynolds number compressible two-equation turbulence models using LU finite volume implicit numerical techniques

A generalized flow solver using an implicit Lower-upper (LU) diagonal decomposition based numerical technique has been coupled with three low-Reynolds number kappa-epsilon models for analysis of problems with engineering applications. The feasibility of using the LU technique to obtain efficient solutions to supersonic problems using the kappa-epsilon model has been demonstrated. The flow solver is then used to explore limitations and convergence characteristics of several popular two equation turbulence models. Several changes to the LU solver have been made to improve the efficiency of turbulent flow predictions. In general, the low-Reynolds number kappa-epsilon models are easier to implement than the models with wall-functions, but require much finer near-wall grid to accurately resolve the physics. The three kappa-epsilon models use different approaches to characterize the near wall regions of the flow. Therefore, the limitations imposed by the near wall characteristics have been carefully resolved. The convergence characteristics of a particular model using a given numerical technique are also an important, but most often overlooked, aspect of turbulence model predictions. It is found that some convergence characteristics could be sacrificed for more accurate near-wall prediction. However, even this gain in accuracy is not sufficient to model the effects of an external pressure gradient imposed by a shock-wave/ boundary-layer interaction. Additional work on turbulence models, especially for compressibility, is required since the solutions obtained with base line turbulence are in only reasonable agreement with the experimental data for the viscous interaction problems.

Lee, J.↗

Cartesian grid simulations of gas-solids flow systems with complex geometry

Complex geometries encountered in many applications of gas–solids flow need special treatment in most legacy multiphase flow solvers with Cartesian numerical grid. This paper briefly outlines the implementation of a cut cell technique in the open-source multiphase flow solver—MFIX for accurate representation of complex geometries. Specifically, applications of the Cartesian cut cell method to different gas–solids fluidization systems including a small scale bubbling fluidized bed with submerged tube bundle and a complete pilot-scale circulating fluidized bed will be presented. In addition to qualitative predictions on the general flow behaviors inside each system, quantitative comparison with the available experimental data will be presented. Furthermore, some results on extending the current cut-cell technique to Lagrangian–Eulerian simulations will be presented.

42 ENGINEERING↗

Code Verification of the HIGRAD Computational Fluid Dynamics Solver

The purpose of this report is to outline code and solution verification activities applied to HIGRAD, a Computational Fluid Dynamics (CFD) solver of the compressible Navier-Stokes equations developed at the Los Alamos National Laboratory, and used to simulate various phenomena such as the propagation of wildfires and atmospheric hydrodynamics. Code verification efforts, as described in this report, are an important first step to establish the credibility of numerical simulations. They provide evidence that the mathematical formulation is properly implemented without significant mistakes that would adversely impact the application of interest. Highly accurate analytical solutions are derived for four code verification test problems that exercise different aspects of the code. These test problems are referred to as: (i) the quiet start, (ii) the passive advection, (iii) the passive diffusion, and (iv) the piston-like problem. These problems are simulated using HIGRAD with different levels of mesh discretization and the numerical solutions are compared to their analytical counterparts. In addition, the rates of convergence are estimated to verify the numerical performance of the solver. The first three test problems produce numerical approximations as expected. The fourth test problem (piston-like) indicates the extent to which the code is able to simulate a 'mild' discontinuity, which is a condition that would typically be better handled by a Lagrangian formulation. The current investigation concludes that the numerical implementation of the solver performs as expected. The quality of solutions is sufficient to provide credible simulations of fluid flows around wind turbines. The main caveat associated to these findings is the low coverage provided by these four problems, and somewhat limited verification activities. A more comprehensive evaluation of HIGRAD may be beneficial for future studies.

17 WIND ENERGY↗