Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “moving shock”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14
All sourcesNASA NTRSDOE OSTI
NASA NTRS1973

Heating and flow-field studies on a straight-wing hypersonic reentry vehicle at angles of attack from 20 to 80 deg with simulation of real-gas trends

Data are presented from a series of phase-change heat transfer and flow visualization tests at Mach 7.4, 8, and 10.3 in air, Mach 19.5 in nitrogen, Mach 20.3 in helium, and Mach 6 in tetrafluoromethane (CF4) on the windward surface of a straight wing hypersonic reentry configuration for angles of attack from 20 deg to 80 deg. The results indicate that: (1) for hypersonic stream Mach numbers, the flow field over the straight-wing configuration is essentially independent of Mach number, (2) transition Reynolds number decreases with increasing angle of attack, (3) at some critical angle of attack, the wing-shock standoff distance is greatly increased and the stagnation line moves downstream from the wing leading edge, (4) value of the critical angle of attack is very sensitive to the flow shock density ratio or effective gamma, and (5) at angles of attack above the critical value for all gases, the nondimensional level of heat transfer to the wing is higher for the higher shock density ratio flows.

Hunt, J. L.↗
NASA NTRS1990

Mach 6 testing of two generic three-dimensional sidewall compression scramjet inlets in tetrafluoromethane

Three-dimensional sidewall compression scramjet inlets with leading edge sweeps of 30 and 70 degrees have been tested in the Langley Hypersonic CF4 Tunnel at Mach 6 and a ratio of specific heats of 1.2. The effects of cowl position, contraction ratio, and Reynolds number were investigated. The models were instrumented with 42 static pressure orifices distributed on the sidewalls, baseplate, and cowl. Schlieren movies were made of each test for flow visualization of the entrance plane and cowl region. In order to obtain an approximate characterization of the flow field, a modification to two-dimensional inviscid oblique shock theory was derived to accommodate the three-dimensional effects of leading edge sweep. This theory qualitatively predicted the reflected shock structure/sidewall impingement locations and the observed increase in spillage (flow upturning) with increasing leading edge sweep. The primary effect of moving the cowl forward is capturing the flow which would have otherwise spilled out ahead of the cowl. Increasing the contraction ratio (moving the sidewalls closer together) increases the number of internal shock reflections and hence incrementally increases the sidewall pressure distribution. Significant Reynolds number effects were noted over a small range of Reynolds number.

Holland, Scott D.↗
NASA NTRS1982

Evidence for specularly reflected ions upstream from the quasi-parallel bow shock

Ion velocity distributions in the form of bunches of gyrating particles traveling along helical paths have been observed moving sunward immediately upstream from quasi-parallel parts of the earth's bow shock using Los Alamos/Garching instruments on ISEE-1 and -2. These distributions have characteristics which indicate that they are produced by the nearly specular reflection at the shock of a portion of the incident solar wind ions. In particular, the guiding center motion and the gyrospeeds of the gyrating ions are quantitatively consistent with simple geometrical considerations for specular reflection. These considerations reveal that specularly reflected ions can escape upstream when the angle between the upstream magnetic field and the local shock normal is less than 45 deg but not when the angle is greater than 45 deg. These upstream gyrating ions are an important signature of one of the processes by which solar wind streaming energy is dissipated into other forms of energy at the shock.

Gosling, J. T.↗
NASA NTRS1972

A gas-dynamic calculation of type 2 shock propagation through the corona

An approximate analytic theory of acoustic shock propagation in nonuniform media is used to determine the motion of a flare-generated shock wave in the corona. The shock is followed from the time it strikes the chromosphere-corona transition region (density interface) out to 5 solar radii under the assumption that the corona in this region is approximately in hydrostatic equilibrium. The strength of the shock incident on the transition region from below determines the ejection velocity of eruptive prominence material, as well as the initial velocity of the coronal shock. The calculation is applied to one well-documented case of a related flare spray, moving type 4 isolated source, and type 2 burst. It is shown that a chromospheric shock of the appropriate strength to produce the observed prominence and type 4 velocities strengthens as it moves out in the corona by an amount sufficient to account for the observed high velocity of the type 2 burst.

Kopp, R. A.↗
NASA NTRS2012

Experimental Investigation of Normal Shock Boundary-Layer Interaction with Hybrid Flow Control

Hybrid flow control, a combination of micro-ramps and micro-jets, was experimentally investigated in the 15x15 cm Supersonic Wind Tunnel (SWT) at the NASA Glenn Research Center. Full factorial, a design of experiments (DOE) method, was used to develop a test matrix with variables such as inter-ramp spacing, ramp height and chord length, and micro-jet injection flow ratio. A total of 17 configurations were tested with various parameters to meet the DOE criteria. In addition to boundary-layer measurements, oil flow visualization was used to qualitatively understand shock induced flow separation characteristics. The flow visualization showed the normal shock location, size of the separation, path of the downstream moving counter-rotating vortices, and corner flow effects. The results show that hybrid flow control demonstrates promise in reducing the size of shock boundary-layer interactions and resulting flow separation by means of energizing the boundary layer.

Vyas, Manan A.↗
NASA NTRS1975

Direct observations of the solar wind interaction with Jupiter

Pioneer 10 and Pioneer 11 plasma ion and electron observations in the vicinity of Jupiter are summarized. The data, obtained by the Ames Research Center Plasma Analyzer Experiments during the flybys of Jupiter in 1973 and 1974, indicate that the solar wind interaction with Jupiter (e.g., the formation of the Jovian bow shock, the magnetosheath, etc.) is basically similar to the solar wind interaction with the earth and only differs in terms of the scale size of the interaction. The plasma ion and electron measurements obtained on Pioneer 10 and Pioneer 11 are consistent with the proton measurements and indicate that the large, thick Jovian Magnetosphere which is inflated with a thermal plasma, is responsive to relatively minor changes in the solar wind dynamic pressure. The inferred motion of the Jovian bow shock and the speed at which it moved were strikingly similar during the Pioneer 10 and Pioneer 11 flybys.

Intriligator, D. S.↗
NASA NTRS1983

A three degree-of-freedom, typical section flutter analysis using harmonic transonic air forces

Typical section flutter solutions are obtained using generalized air forces calculated with OPTRAN2, a program based on the transonic small perturbation potential equation, which uses potentials from a nonlinear solution to the steady flow to obtain linear unsteady air forces. Flutter results are calculated with a conventional, linear V-g type solution. Results are presented for a NACA 64A010 airfoil oscillating in plunge and pitch, and with a quarter-chord control surface in the Mach number range of 0.80 to 0.90. The flutter boundary shows a significant 'transonic' bucket, together with changes in flutter mode as, with increasing Mach numbers, a shock appears on the airfoil and then moves aft. Single degree-of-freedom instabilities associated with both the pitch and the control surface motions are identified.

Weatherill, W. H.↗
NASA NTRS1992

A test suite for magnetohydrodynamical simulations

A collection is presented of MHD problems that will provide researchers who have interests in modeling MHD phenomena with a battery of tests (a 'test suite') for calibrating their numerical algorithms. Use of these tests will provide a common reference for comparison of different numerical MHD algorithms. The test suite includes both 1D and 2D problems. Taken together, these problems test the abilities of a numerical method to propagate accurately all of the MHD wave families in moving and stationary media, to capture MHD shocks and contact discontinuities, and to model accurately Lorentz force terms in multiple dimensions. An example solution of each test problem is presented. Diagnostic convergence-testing procedures that provide a quantitative evaluation of MHD algorithms are demonstrated.

Stone, James M.↗
NASA NTRS2002

Core and Large-Scale Structure of the 2000 November 24 X-Class Flare and Coronal Mass Ejection

In this paper, we present three important aspects of the XI .8 flare and the associated coronal mass ejection (CME) that occurred on 2000 November 24: (1) The source of the flare is clearly associated with a magnetic channel structure, as was noted in a study by Zirin & Wang , which is due to a combination of flux emergence inside the leading edge of the penumbra of the major leading sunspot and proper motion of the sunspot group. The channel structure provides evidence for twisted flux ropes that can erupt, forming the core of a CME, and may be a common property of several superactive regions that have produced multiple X-class flares in the past. (2) There are actually three flare ribbons visible. The first can be seen moving away from the flare site, while the second and third make up a stationary ribbon near the leader spot. The moving ribbons could be due to a shock associated with the erupting flux rope or due to the interaction of erupting rope and the surrounding magnetic fields. In either case, the ribbon motion does not fit the classical Kopp-Pneuman model, in which the separation of ribbons is due to magnetic reconnection at successively higher and higher coronal altitudes. (3) From the coronal dimming observed with the EUV Imaging Telescope (EIT), the CME involved a much larger region than the initial X-class flare. By comparing high-resolution full-disk Ha and EIT observations, we found that a remote dimming area is cospatial with the enhanced Ha emission. This result is consistent with the recent model of Yokoyama & Shibata that some dimming areas near footpoints may be due to chromospheric evaporation.

Wang, Haimin↗
DOE OSTI2022

Observations on the deformation of metal microspheres in shock-driven polymer flows

We report that solid particles can be fragmented by a fast-moving fluid if their velocity difference is great enough, such as during the atmospheric entry of meteoroids or the shock compression of engineered particulate composites. The extent of particle deformation and breakup in such systems is poorly understood because the necessary extreme conditions make observation difficult and data scarce. To meet this need, experiments combining ultrafast synchrotron-based radiography with plate impact loading were performed at the dynamic compression sector at the advanced photon source. Metal microspheres of several densities and strengths (Au, Ta, and W) were placed inside a polymer matrix. A planar shock wave was then produced in the polymer by the impact of a gun-launched flyer plate. X-ray images of the resulting flow were collected at ~150ns intervals. These images document the progression of particle deformation across a range of flow conditions and particle materials. They show that the extent of deformation is sensitive to the ratio of drag stress to particle strength. The deforming particle's shape is determined by the initial shock–particle interaction, fluid stagnation pressure, and vorticity, each acting on its own timescale. A set of scaling relationships is presented to capture these observations and enable comparison with prior hydrodynamic data. The result is a framework for predicting the conditions under which strong particles are severely deformed by a shock-driven flow.

36 MATERIALS SCIENCE↗
NASA NTRS1949

A review of analytical methods for the treatment of flows with detached shocks

The transonic flow theory has been considerably improved in recent years. The problems at subsonic speeds of a moving body concern chiefly the drag and the problems at supersonic speeds, the detached and attached shock waves. Inasmuch as the literature contains some information that is valuable and some other information that is misleading, the purpose of this paper is to discuss those analytical methods and their applications which are regarded as reliable in the transonic range. After these methods are reviewed, a short discussion without details and proofs follows to round out the picture. (author)

FLOW VELOCITY, HIGH - TRANSONIC↗
NASA NTRS1987

Hydrodynamical constraints on cosmic-ray acceleration in relativistic shocks

A two-fluid hydrodynamical model governing the transport of cosmic rays in a relativistically moving background plasma is developed. The equations are used to discuss the time asymptotic structure of a relativistic, plane-parallel shock wave significantly modified by first-order Fermi acceleration of cosmic rays. The model allows for an anisotropic cosmic-ray pressure tensor with pressure components parallel and perpendicular to the shock normal. It is surmised that the well-known energy threshold problem for diffusive shock acceleration that downstream particles have a large enough velocity to overtake the shock and subsequently scatter in the upstream medium before returning to the downstream medium may be expressed hydrodynamically by the condition V less than V(cr), where V is the fluid velocity relative to the shock and V(cr) is the relativistic cosmic-ray sound speed. Astrophysical implications of the results are briefly discussed.

Webb, G. M.↗
NASA NTRS1975

On the stability of plane shocks

In the analysis of shock stability reported, the disturbances are assumed to originate at an arbitrary moving point. A change in the decay mechanism is shown to result from the increasing angle of incidence between the shock and an intersecting cylindrical (or spherical) wave generated behind it. The local reflection coefficient for reflection of a pressure wave from a shock varies strongly with the angle of incidence. At small angles of incidence the reflected wave is very weak and the incident wave decays in a geometric manner.

Van Moorhem, W. K.↗
DOE OSTI2025

Quadrilateral particle arrangement within shocks in a two-dimensional dusty plasma

The microscopic structure within a two-dimensional shock was studied using data from a dusty plasma experiment. A single layer of charged microparticles, levitated in a glow-discharge plasma, was perturbed by an electrically floating wire that was moved at a steady supersonic speed to excite a compressional shock. A rearrangement of particles was observed, from a hexagonal lattice in the preshock into a quadrilateral microstructure on the front side of the shock. This quadrilateral structure would not be stable in a monolayer of identical repulsive particles, under equilibrium conditions. Glaser-Clark polygon analysis of the microstructure helped in identifying quadrilaterals. Voronoi analysis was used to characterize the defect fraction behind the shock, as an indication of shock-induced melting. Published by the American Physical Society 2025

Kananovich, Anton (ORCID:0000000225374952)↗
NASA NTRS1981

Gentle arrester for moving bodies

Wire cable absorbs energy at constant rate with reduced shock and rebounding. Cable typically elongates to 90 percent of its potential, but is surrounded by braided sheath to absorb remaining energy should it break prematurely. Applications of arrester include passenger restraint in air and land vehicles, parachute risers, and ground snatch by aircraft. Possible cable material is type 302 stainless steel.

Hull, R. A.↗
NASA NTRS1979

Hydrodynamic simulations of flare/surge events

A one-dimensional, hydrodynamic, time-dependent model which simulates the major observed dynamics of flare associated surges was developed. The thermodynamics, the surge mass, the time scales, the physical dimensions, and the velocities of typical surge events are reproduced. The surge is created by a sudden pressure increase at the top of the chromosphere, and this pressure pulse produces a disturbance which is followed, with a time-dependent numerical solution, as it propagates upward through the transition region and into the corona. The leading edge of the disturbance is a weak shock which has only a slight effect on the original transition region and coronal thermodynamics. The major effect occurs behind the shock where the temperature is decreased and the density is increased, and this cool, dense region moves upward then falls downward. After the material begins returning to the chromosphere, a second shock is formed which propagates upward, brings the infalling material to rest, and returns the atmosphere to hydrostatic equilibrium.

Steinolfson, R. S.↗
NASA NTRS1983

Dynamical evolution of interplanetary magnetic fields and flows between 0.3 AU and 8.5 AU: Entrainment

The radial evolution of interplanetary flows and associated magnetic fields between 0.3 AU and 8.5 was analyzed using data from Helios 1 and Voyager 1, respectively. During a 70 day interval Voyager 1 observed two streams which appeared to be recurrent and which had little fine structure. The corresponding flows observed by Helios 1 were much more complex, showing numerous small streams, transient flows and shocks as well as a few large corotating streams. It is suggested that in moving to 8 AU the largest corotating streams swept up the slower flows (transient and/or corotating streams) and shocks into a relatively thin region in which they coalesced to form a single large amplitude compression wave. This combined process of sweeping and coalescence is referred to as entrainment. The resulting large amplitude compression wave is different from that formed by the steepening of a corotating stream from a coronal hole, because different flows from distinct sources, with possibly different composition and magnetic polarity, are brought together to form a single new structure.

Burlaga, L. F.↗
NASA NTRS1978

Tread drum for animals

A device for exercising animals such as primates is described, which includes a cylindrical housing mounted for rotation about a horizontal axis of revolution and has a cylindrical treadway portion on which the animal treads while the drum is rotated by means of a motorized drive. The treadway portion of the drum includes an electrode structure with sectors being independently energizable by means of a commutator and source of potential so that an electrical shock station is created behind a running-in-place station on the moving treadway. In this manner, if the animal should fall behind its running-in-place station, it may be shocked by treading on the energized electrode structure. One end of the tread drum comprises a transparent wall for unobstructed viewing of the animal being exercised.

Howard, W. H.↗