Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “materials predictions”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Multiobjective Constrained Symbolic Regression for Predictive Modeling of Material Creep Behavior

When creep testing is repeated on samples of the same alloy under the same parametric conditions (i.e., stress and temperature), the resulting strain/time curves can vary from each other considerably as shown in Figure 1 [1]. The time required to creep test a material to rupture can extend to the order of years. Because of this, a numerical model that can quickly analyze the incomplete results of an ongoing experiment to predict 1) the incomplete portion of the strain/time curve leading up to the rupture point and 2) the rupture point itself would be of great utility to the materials community. Such a model has the potential to save 1) the time required to finish running the experiment to rupture 2) the associated monetary cost of finishing said experiment. Furthermore, it would be advantageous if the predictive model could give a parametric function modeling strain/time curves for material scientists to investigate the impact of the temperature and stress parameters on the resulting creep behavior. This work introduces a piecewise symbolic regression algorithm to predict the remainder of the strain/time curve. Preliminary results show good model performance.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Reproducibility in materials informatics: lessons from ‘A general-purpose machine learning framework for predicting properties of inorganic materials’

The integration of machine learning techniques in materials discovery has become prominent in materials science research and has been accompanied by an increasing trend towards open data and open-source tools to propel the field. Despite the increasing usefulness and capabilities of these tools, developers neglecting to follow reproducible practices presents a significant barrier for other researchers looking to use or build upon their work. In this study, we investigate the challenges encountered while attempting to reproduce a section of the results presented in “A general-purpose machine learning framework for predicting properties of inorganic materials.” Our analysis identifies four major categories of challenges: (1) reporting software dependencies, (2) recording and sharing version logs, (3) sequential code organization, and (4) clarifying code references within the manuscript. The result is a proposed set of tangible action items for those aiming to make material informatics tools accessible to, and useful for the community.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Towards Efficient Uncertainty estimation in deep learning for robust energy prediction in crystal materials

In material science, recent studies have started to explore the potential of using deep learning to improve property prediction from high-fidelity simulations, e.g, density functional theory (DFT). However, the design spaces are sometimes too large and intractable to sample completely. This results in a critical question that is how to evaluate the confidence and robustness of the prediction. In this paper, we propose an efficient approach to estimate uncertainty in deep learning using a single forward pass and then apply it for robust prediction of the total energy in crystal lattice structures. Our approach is built upon the deep kernel learning (DKL) that originally introduces to leverage the expressiveness of deep neural networks as input with a probabilistic prediction of Gaussian processes (GPs) as output. Existing DKL methods have difficulties in the accuracy of predictive uncertainty, training stability, and scaling to large datasets, which lead to significant barriers in real-world applications. We propose to address these challenges by using an inducing point approximate GP in feature space combined with spectral normalization as a regularization. We finally demonstrate our robust performance on an artificial example and a real-world application from materials chemistry.

Bi, Sirui↗
NASA NTRS1984

Studies of acoustical properties of bulk porous flexible materials

Acoustic prediction and measurement of bulk porous materials with flexible frames is investigated. The acoustic properties of Kevlar 29 are examined. Various acoustic tests are employed to determine impedance, sound wave propagation, and wave pressure equations for the highly porous fiber composites. The derivation of design equations and future research goals are included.

Lambert, R. F.↗
DOE OSTI2021

Cross-property deep transfer learning framework for enhanced predictive analytics on small materials data

Abstract Artificial intelligence (AI) and machine learning (ML) have been increasingly used in materials science to build predictive models and accelerate discovery. For selected properties, availability of large databases has also facilitated application of deep learning (DL) and transfer learning (TL). However, unavailability of large datasets for a majority of properties prohibits widespread application of DL/TL. We present a cross-property deep-transfer-learning framework that leverages models trained on large datasets to build models on small datasets of different properties. We test the proposed framework on 39 computational and two experimental datasets and find that the TL models with only elemental fractions as input outperform ML/DL models trained from scratch even when they are allowed to use physical attributes as input, for 27/39 (≈ 69%) computational and both the experimental datasets. We believe that the proposed framework can be widely useful to tackle the small data challenge in applying AI/ML in materials science.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Lightweight Materials - Carbon Fiber and Polymer Composites, Integrated Computational Materials Engineering (ICME) Predictive Tools Development for Low-Cost Carbon Fiber for Lightweight Vehicles (University of Virginia) (Final Report)

This project aimed to develop low-cost alternative precursors and processing techniques through the implementation of an integrated computational materials engineering (ICME) framework to evaluate precursor conversion kinetics. Once established, this framework was then used to down-select precursors for laboratory- and pilot-scale production to validate resulting carbon fiber (CF) material properties and process cost-savings. The two most promising approaches to reduce the cost of CFs were to (1) use new low-cost precursors and (2) reduce the energy requirements of CF processing. These approaches were investigated over the course of three phases of work, spanning 3.5 years. This report describes the overall project objectives, approach, and the key accomplishments in each phase.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Perspectives on multiscale modelling and experiments to accelerate materials development for fusion

Prediction of material performance in fusion reactor environments relies on computational modelling, and will continue to do so until the first generation of fusion power plants come on line and allow long-term behaviour to be observed. In the meantime, the modelling is supported by experiments that attempt to replicate some aspects of the eventual operational conditions. In 2019, a group of leading experts met under the umbrella of the IEA to discuss the current position and ongoing challenges in modelling of fusion materials and how advanced experimental characterisation is aiding model improvement. This review draws from the discussions held during that workshop. Topics covering modelling of irradiation-induced defect production and fundamental properties, gas behaviour, clustering and segregation, defect evolution and interactions are discussed, as well as new and novel multiscale simulation approaches, and the latest efforts to link modelling to experiments through advanced observation and characterisation techniques.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
NASA NTRS1990

Predicting Pressure Drop In Porous Materials

Theory developed to predict drop in pressure based on drag of individual fibers. Simple correlation method for data also developed. Helps in predicting flow characteristics of many strain-isolation pad (SIP) glow geometries in Shuttle Orbiter tile system. Also helps in predicting venting characteristics of tile assemblies during ascent and leakage of hot gas under tiles during descent. Useful in study of mechanics of flows through fibrous and porous media, and procedures applicable to purged fiberglass insulation, dialysis filters, and other fibrous and porous media.

Lawing, Pierce L.↗
NASA NTRSDate not supplied

Development of Computational Materials Workflows for Additively Manufactured Metallic Materials to Enable Accelerated Prediction of Fatigue Performance

The maturation of computational materials approaches for fatigue performance prediction in a qualification and certification process is stifled by the ability to validate complex, microstructure-based simulations. Such a validation strategy bears immediate challenges including generating accurate virtual microstructures, efficiently solving physics-based mechanical simulations over relevant spatial and temporal scales, and acquiring high-fidelity calibration and validation data at the appropriate length scale. This presentation will overview these common challenges and present a case study to demonstrate a computational materials workflow for additively manufactured metallic materials. In this study, process-specific defects are characterized using segmented X-Ray micro-computed tomography measurements and overlaid on virtual microstructures. Accelerated crystal plasticity-based fatigue simulations are performed to demonstrate cyclic evolution and localization of mechanical fields in the vicinity of defects in response to their precise spatial configuration. An example of how this computational materials workflow may support next-generation qualification is discussed.

computational materials↗
DOE OSTI2025

Toward improved property prediction of 2D materials using many-body quantum Monte Carlo methods

The field of 2D materials has grown dramatically in the past two decades. 2D materials can be utilized for a variety of next-generation optoelectronic, spintronic, clean energy, and quantum computing applications. These 2D structures, which are often exfoliated from layered van der Waals materials, possess highly inhomogeneous electron densities and can possess short- and long-range electron correlations. The complexities of 2D materials make them challenging to study with standard mean-field electronic structure methods such as density functional theory (DFT), which relies on approximations for the unknown exchange-correlation functional. To overcome the limitations of DFT, highly accurate many-body electronic structure approaches such as diffusion Monte Carlo (DMC) can be utilized. In the past decade, DMC has been used to calculate accurate magnetic, electronic, excitonic, and topological properties in addition to accurately capturing interlayer interactions and cohesion and adsorption energetics of 2D materials. Here, this approach has been applied to 2D systems of wide interest, including graphene, phosphorene, MoS 2 , CrI 3 , VSe 2 , GaSe, GeSe, borophene, and several others. In this review article, we highlight some successful recent applications of DMC to 2D systems for improved property predictions beyond standard DFT.

2D materials↗
DOE OSTI2020

A First–Principles–Based Sub–Lattice Formalism for Predicting Off–Stoichiometry in Materials for Solar Thermochemical Applications: The Example of Ceria

Theoretical models that reliably can predict off-stoichiometry in materials via accurate descriptions of underlying thermodynamics are crucial for energy applications. For example, transition-metal and rare-earth oxides that can tolerate a large number of oxygen vacancies, such as CeO 2 and doped CeO 2 , can split water and carbon dioxide via a two-step, oxide-based solar thermochemical (STC) cycle. The search for new STC materials with a performance superior to that of state-of-the-art CeO 2 can benefit from predictions accurately describing the thermodynamics of oxygen vacancies. The sub-lattice formalism, a common tool used to fit experimental data and build temperature-composition phase diagrams, can be useful in this context. Here, sub-lattice models are derived solely from zero-temperature quantum mechanics calculations to estimate fairly accurate temperature- and oxygen-partial-pressure-dependent off-stoichiometries in CeO 2 and Zr-doped CeO 2 . Physical motivations for deriving some of the “excess” sub-lattice model parameters directly from quantum mechanical calculations, instead of fitting to minimize deviations from experimental and/or theoretical data, are identified. As a result, important limitations and approximations of the approach used are specified and extensions to multi-cation oxides are also suggested to help identify novel candidates for water and carbon dioxide splitting and related applications.

08 HYDROGEN↗
DOE OSTI2024

A machine-learning-aided data recovery approach for predicting multi-material thermal behaviors in advanced test reactor capsules

Instrumented experiments conducted at test reactors are essential to the deployment of new advanced reactor systems. Designing new experiments and generating data on specific reactor conditions require significant investments in terms of both time and cost. Finite element analysis software can be used to create high-fidelity models of experiment environments in order to support the actual experiments, but computation time remains a concern in terms of applying outcomes to real-time usage of data (e.g., a digital twin [DT]). Here, the present research proposes a machine-learning (ML) aided approach to making temperature and displacement predictions based on the thickness of the outer gas gap on the experimental capsule used for in-pile demonstration of a novel new thermal conductivity probe in the Advanced Test Reactor (ATR). This capsule consisted of U10Zr fuel, a rodlet, sodium, and inner and outer capsules. Gas gaps existed between the fuel and the rodlet, and between the inner and the outer capsule. The learning data pertained to an experimental capsule's radial distributions of temperature and displacement, as obtained based on Abaqus and the physical features. For the first step of ML sequence, the temperature was predicted using three positional parameters. Next, the displacement was predicted using seven additional parameters. Each physical feature was normalized in order to be both nondimensional and standardized. The temperature and displacement predictions showed good agreement with the simulation results in all cases involving interpolation and extrapolation. Furthermore, data similarity enhancement increased the similarity between the training and the target data, thereby increasing the predictive accuracy of the ML models. In certain extrapolation cases involving limited original ML model accuracy, data similarity enhancement and data recovery was able to somewhat improve this accuracy.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2022

Symmetry relation database and its application to ferroelectric materials discovery

To investigate the displacive phase transition at the atomic scale, we have implemented a numerical algorithm to automate the detection of the symmetry relations between any two candidate crystal structures. Using this algorithm, here we systematically screen all possible polar–nonpolar structure pairs from the Materials Project database and establish a library of ~4500 pairs that can be connected through a continuous phase transition with small atomic displacements. From this database, we identify several new ferroelectric materials. In addition, the database may also be used in other areas, such as material structure prediction and new materials discovery.

36 MATERIALS SCIENCE↗
NASA NTRS1975

Space shuttle nonmetallic materials age life prediction

The chemiluminescence from samples of polybutadiene, Viton, Teflon, Silicone, PL 731 Adhesive, and SP 296 Boron-Epoxy composite was measured at temperatures from 25 to 150 C. Excellent correlations were obtained between chemiluminescence and temperature. These correlations serve to validate accelerated aging tests (at elevated temperatures) designed to predict service life at lower temperatures. In most cases, smooth or linear correlations were obtained between chemiluminescence and physical properties of purified polymer gums, including the tensile strength, viscosity, and loss tangent. The latter is a complex function of certain polymer properties. Data were obtained with far greater ease by the chemiluminescence technique than by the conventional methods of study. The chemiluminescence from the Teflon (Halon) samples was discovered to arise from trace amounts of impurities, which were undetectable by conventional, destructive analysis of the sample.

Mendenhall, G. D.↗