Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “material performance”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14
All sourcesNASA NTRSDOE OSTI
NASA NTRS1983

Thermal and mechanical properties of advanced, high temperature ceramic-composite insulation

It is found that the mechanical properties of fibrous refractory composite insulation (FRCI) can be improved if a higher calcination temperature is used before final processing. The results also reveal that a higher density FRCI containing 60 wt pct aluminoborosilicate fibers will exhibit minimal surface recession at 1480 C in a convective-heating environment. Another finding is that the material performance in the convective-heating environment is limited by the coating and the temperature capability of its emittance agent. A table is included giving the coating compositions used with the composite insulation and tested in the convectively heated environment at a surface temperature of 1480 C.

Leiser, D. B.↗
NASA NTRS1984

Matrix Resin Characterization in Cured Graphite Composites Using Diffuse Reflectance-Ftir

The chemical characterization of cured graphite fiber reinforced polymer matrix composites is complicated by the fact that the resins are insoluble and the composites are apaque. Standard analyses which depend either on the ability to dissolve the sample or to detect transmitted radiation are impossible. As a result, data reported on environmentally exposed composites primarily concern macroscopic information such as weight loss or changes in selected mechanical properties. Diffuse reflectance in combination with fourier transform infrared spectroscopy was developed to gain a basic chemical understanding of composite and adhesive behavior. Several composite and adhesive materials were characterized before and after environmental exposure. In each case significant changes in resin molecular structure were observed and correlated with changes in mechanical properties, providing new insights into material performance.

Young, P. R.↗
NASA NTRS1985

Development of a continuous broad-energy-spectrum electron source

The development of a practical prototype, large-area, continuous-spectrum, multienergy electron source to simulate the lower energy (approx = 1 to 30 keV) portion of the geosynchronous orbit electron environment was investigated. The results of future materials-charging tests using this multienergy source should significantly improve the understanding of actual in-orbit charging processes and should help to resolve some of the descrepancies between predicted and observed spacecraft materials performance.

Adamo, R. C.↗
NASA NTRS1985

Space Station crew workload - Station operations and customer accommodations

The features of the Space Station which permit crew members to utilize work time for payload operations are discussed. The user orientation, modular design, nonstressful flight regime, in space construction, on board control, automation and robotics, and maintenance and servicing of the Space Station are examined. The proposed crew size, skills, and functions as station operator and mission specialists are described. Mission objectives and crew functions, which include performing material processing, life science and astronomy experiments, satellite and payload equipment servicing, systems monitoring and control, maintenance and repair, Orbital Maneuvering Vehicle and Mobile Remote Manipulator System operations, on board planning, housekeeping, and health maintenance and recreation, are studied.

Shinkle, G. L.↗
NASA NTRS1986

Space Station technology experiments and uses

The use of the proposed Space Station for technological experimentation is discussed. The general objectives and capabilities of the Station and the status of planning are reviewed; the external and internal environmental conditions at the 500-km 28.5-deg-inclination Station orbit are described; and six conceptual Technology Development Missions designed by NASA and included in the Mission Requirements Data Base are briefly characterized and illustrated with drawings. The missions considered concern spacecraft-materials performance, solar dynamic power, data transfer and processing microelectronics, long-term cryogenic-fluid storage, active-optics technology, and cryogenic-propellant transfer, storage, and reliquefaction.

Breckenridge, R. A.↗
NASA NTRS1987

Hydraulic Fatigue-Testing Machine

Fatigue-testing machine applies fluctuating tension to number of specimens at same time. When sample breaks, machine continues to test remaining specimens. Series of tensile tests needed to determine fatigue properties of materials performed more rapidly than in conventional fatigue-testing machine.

Hodo, James D.↗
NASA NTRS1987

A more perfect vacuum

Design and operational features, problems and benefits of a Space Ultravacuum Research Facility (SURF), a wake shield, are discussed. SURF is primarily targeted at providing vacuums exceeding 10 to the -14th torr for performing materials processing experiments and, eventually, commercial-scale production. The materials to be processed would be at the apex of a convex shield, with the quality of vacuum limited mainly by the backscattering toward the wake surface of atmospheric molecules which have collided with molecules leaving the SURF surface. A stainless steel skin on the SURF, cured in orbit, is proposed as a means to minimize the molecules outgassed from the surface. Applications of SURF could include coating mirrors or other optical equipment, containerless melting and solidification of materials, and ultrapurification processing.

Naumann, Robert J.↗
NASA NTRS1989

Improving transient analysis technology for aircraft structures

Aircraft dynamic analyses are demanding of computer simulation capabilities. The modeling complexities of semi-monocoque construction, irregular geometry, high-performance materials, and high-accuracy analysis are present. At issue are the safety of the passengers and the integrity of the structure for a wide variety of flight-operating and emergency conditions. The technology which supports engineering of aircraft structures using computer simulation is examined. Available computer support is briefly described and improvement of accuracy and efficiency are recommended. Improved accuracy of simulation will lead to a more economical structure. Improved efficiency will result in lowering development time and expense.

Melosh, R. J.↗
NASA NTRS1990

Computed structures of polyimides model compounds

Using a semi-empirical approach, a computer study was made of 8 model compounds of polyimides. The compounds represent subunits from which NASA Langley Research Center has successfully synthesized polymers for aerospace high performance material application, including one of the most promising, LARC-TPI polymer. Three-dimensional graphic display as well as important molecular structure data pertaining to these 8 compounds are obtained.

Tai, H.↗
NASA NTRS1989

Requirements and designs for Mars Rover RTGs

A typical Rover mission, its requirements, the environment it imposes on the radionuclide thermoelectric generator (RTG), and a design approach for making the RTG operable in such an environment are described. Specific RTG designs for various thermoelectric element alternatives are presented. The results of studies show that current multifoil-insulated GPHS (general-purpose heat source) RTG and Mod-RTG designs can be modified to operate in an environment with an external atmosphere (e.g., Mars). This can be done while the helium generated by the fuel's alpha decay is vented to the external atmosphere. The use of novel selective vents and high-capacity getters is not required. The Rover RTGs can be built from standard, proven GPHS modules and standard SiGe unicouples or SiGe/GaP multicouples, using demonstrated thermoelectric material performance parameters. Rover's 500-W power requirement can be satisfied with two 250-W or four 125-W RTGs, whose sizes are compatible with currently envisaged Rover designs. An auxiliary cooling loop (e.g., water and antifreeze) will be required to cool the RTG while it is within the Rover's aeroshell during launch and transit to Mars.

Schock, A.↗
NASA NTRS1990

Electro-optic network analyzer

The bandwidth of frequency domain measurement methods of electrical signals has usually been far greater than the bandwidth of time domain methods. The primary limits of the time domain approach have been the 20 to 30 GHz bandwidth limit for electronic waveform acquisition instrumentation, and the lack of usable electrical pulse generators for excitation of a test device. The bandwidth of frequency domain network analysis appears to have reached a plateau of between 100 to 200 GHz, while time domain measurement have improved markedly in both bandwidth and sensitivity with the introduction of the pulsed laser based electro-optic sampling approach. Network analysis or the measurement of device scattering parameters provides information necessary to the design of electronic network such as high frequency amplifiers, mixers, and phase shifter. The bandwidth of frequency domain network analysis is currently being exceeded by the next generations of high frequency transistors and devices. Thus the electro-optic approach is a natural means of extending network analysis into the range above 100 GHz by employing time domain methods. In this approach, a suitable electrical excitation pulse is generated and propagated along a transmission line toward a test device. In the picosecond domain, laser driven photoconductive switches provide a unique method of generating electrical transients. Several materials were studied for generating short electrical pulses using photoconductive switches. The various semiconductive materials tested for photoconductive switching, and the electro-optic measurement technique used to characterize the material performance are described.

Jackson, Todd A.↗
NASA NTRS1990

Nuclear thermal rockets using indigenous extraterrestrial propellants

A preliminary examination of a concept for a Mars and outer solar system exploratory vehicle is presented. Propulsion is provided by utilizing a nuclear thermal reactor to heat a propellant volatile indigenous to the destination world to form a high thrust rocket exhaust. Candidate propellants, whose performance, materials compatibility, and ease of acquisition are examined and include carbon dioxide, water, methane, nitrogen, carbon monoxide, and argon. Ballistics and winged supersonic configurations are discussed. It is shown that the use of this method of propulsion potentially offers high payoff to a manned Mars mission. This is accomplished by sharply reducing the initial mission mass required in low earth orbit, and by providing Mars explorers with greatly enhanced mobility in traveling about the planet through the use of a vehicle that can refuel itself each time it lands. Thus, the nuclear landing craft is utilized in combination with a hydrogen-fueled nuclear-thermal interplanetary launch. By utilizing such a system in the outer solar system, a low level aerial reconnaissance of Titan combined with a multiple sample return from nearly every satellite of Saturn can be accomplished in a single launch of a Titan 4 or the Space Transportation System (STS). Similarly a multiple sample return from Callisto, Ganymede, and Europa can also be accomplished in one launch of a Titan 4 or the STS.

Zubrin, Robert M.↗
NASA NTRS1992

Carbon/Carbon Fasteners For Use At High Temperatures

Fasteners made of advanced carbon/carbon material perform well at ambient and high temperatures. Exhibit shear strengths of more than 10 kpsi at room temperature and 13 kpsi at temperature of 2,700 degrees F. However, fasteners exhibited poor tensile strength at room temperature. Best suited to applications in which exposed to shear loads with minimal tension loads. Parts reused after thermal cycling.

Bohlmann, Frank J.↗
NASA NTRS1991

High temperature adhesives

The aerospace and electronics industries have an ever increasing need for higher performance materials. In recent years, linear aromatic polyimides have been proven to be a superior class of materials for various applications in these industries. The use of this class of polymers as adhesives is continuing to increase. Several NASA Langley developed polyimides show considerable promise as adhesives because of their high glass transition temperatures, thermal stability, resistance to solvents/water, and their potential for cost effective manufacture.

St.clair, Terry L.↗
NASA NTRS1991

Ceramic superconducting components

An approach to the application of high-Tc ceramic superconductors to practical circuit elements was developed and demonstrated. This method, known as the rigid conductor process (RCP), involves the mounting of a preformed, sintered, and tested superconductor material onto an appropriate, rigid substrate with an epoxy adhesive which also serves to encapsulate the element from the ambient environment. Circuit elements such as straight conductors, coils and connectors were fabricated from YBa2Cu3O(7-x) superconducting material. Performance results are included for a low-noise low-thermal-conductivity superconducting grounding link for NASA.

Haertling, G. H.↗
NASA NTRS1991

Welding in space and the construction of space vehicles by welding; Proceedings of the Conference, New Carrollton, MD, Sept. 24-26, 1991

The present conference discusses such topics in spacecraft welding as the NASA Long Duration Exposure Facility's evidence on material properties degradation, EVA/telerobotic construction techniques, welding of the superfluid helium on-orbit transfer flight demonstration tanks and hardware, electron-beam welding of aerospace vehicles, variable-polarity plasma arc keyhole welding of Al, aircraft experiments of low-gravity fusion welding, flash-butt welding of Al alloys, and a computer-aided handbook for space welding fabrication. Also discussed are the welded nozzle extension for Ariane launch vehicles, the existence of on-orbit cold-welding, structural materials performance in long-term space service, high-strength lightweight alloys, steels, and heat-resistant alloys for aerospace welded structures, the NASA-Goddard satellite repair program, and the uses of explosion welding and cutting in aerospace engineering.

Source record↗
NASA NTRS1993

Mars transfer vehicle studies

Earth-to-Mars distances vary from 60 to 400 million kilometers over a 14-year cycle. This complicates Mars mission design as a function of calendar time. Stay times at Mars are also strongly driven by opportunities for a return flight path which are within the limits of delta-V associated with practical space vehicles. The biggest difference between Mars and lunar transfer missions is mission time, which grows from a few days for the moon, to as much as a few hundred days for Mars missions. As a result, modules for similarly sized crews must be much larger for Mars missions that for transfer to lunar orbit. Technology challenges for one Mars mission scenario analyzed by Boeing include aerobrakes, propulsion, and life support systems. Mission performance is very sensitive to aerobrake weight fraction and, as a result, there is an incentive to use high performance materials such as advanced composites and thermal protection systems. Lander aerobrake would be used twice (for both planetary capture and descent to the Mars surface), and it would need to survive temperatures up to 3500 degrees.

Woodcock, Gordon↗
NASA NTRS1993

Development of generalized 3-D braiding machines for composite preforms

The operating principles of two prototype braiding machines for the production of generalized braid patterns are described. Both processes afford previously unachievable control of the interlacing of fibers within a textile structure that make them especially amenable to the fabrication of textile preforms for composite materials. They enable independent control of the motion of the individual fibers being woven, thereby enabling the greatest possible freedom in controlling fiber orientation within a structure. This freedom enables the designer to prescribe local fiber orientation to better optimize material performance. The processes have been implemented on a very small scale but at a level that demonstrates their practicality and the soundness of the principles governing their operation.

Huey, Cecil O., Jr.↗