Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “material identification”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14
All sourcesNASA NTRSDOE OSTI
NASA NTRS1976

Holographic Recording Materials Development

Organic photorefractive materials were evaluated for application in a reversible holographic memory system. Representative indigo and thioindigo derivatives and several stilbene derivatives were studied as well as 15, 16-dialkyldihydropyrene derivatives the following goals were achieved: (1) the successful writing of phase holograms in a thioindigo/polymer gel system, (2) the successful writing and erasing of phase holograms in a variety of indigo/polymer gel and indigo/solid polymer systems, and (3) the identification of indigoid dyes and 15, 16-dialkyldihydropyrene derivatives as materials potentially suitable for utilization in an operational system. Photochemical studies of the stilbene, indigo, thioindigo, and dialkyldihydropyrene derivatives in solution and in a variety of polymer matrix materials were conducted with the goal of optimizing the photorefractive behavior of the chemical system as a whole. The spectroscopic properties required of optimal photorefractive materials were identified, and it was shown that both the indigoid dyes and the dialkyldihydropyrenes closely match the required properties.

Verber, C. M.↗
NASA NTRS1992

Lunar Lava Tube Sensing

Large (greater than 300 m diameter) lava tube caverns appear to exist on the Moon and could provide substantial safety and cost benefits for lunar bases. Over 40 m of basalt and regolith constitute the lava tube roof and would protect both construction and operations. Constant temperatures of -20 C reduce thermal stress on structures and machines. Base designs need not incorporate heavy shielding, so lightweight materials can be used and construction can be expedited. Identification and characterization of lava tube caverns can be incorporated into current precursor lunar mission plans. Some searches can even be done from Earth. Specific recommendations for lunar lava tube search and exploration are (1) an Earth-based radar interferometer, (2) an Earth-penetrating radar (EPR) orbiter, (3) kinetic penetrators for lunar lava tube confirmation, (4) a 'Moon Bat' hovering rocket vehicle, and (5) the use of other proposed landers and orbiters to help find lunar lava tubes.

York, Cheryl Lynn↗
NASA NTRS1994

Health, safety and environmental requirements for composite materials

The health, safety and environmental requirements for the production of composite materials are discussed. The areas covered include: (1) chemical identification for each chemical; (2) toxicology; (3) industrial hygiene; (4) fire and safety; (5) environmental aspects; and (6) medical concerns.

Hazer, Kathleen A.↗
NASA NTRSDate not supplied

Using Mineralogy to Interpret Martian Geologic History

The surface mineralogy of Mars is key to interpreting the planet’s geologic history and constraining when and where Mars may have been habitable to microbial life. Orbital mineralogical data from infrared spectrometers collected over the last two decades have demonstrated that Mars is more than a basaltic planet. Thermal infrared (TIR) emission spectrometers have identified regional variations in igneous minerals, iron oxides, and chloride salts, showing evidence for magmatic evolution and aqueous alteration. Orbital visible/shortwave infrared reflectance spectra provide detailed information about the aqueous history of Mars through the identification of clay minerals, sulfates, carbonates, zeolites, and amorphous materials in ancient ~3-4-billion-year-old terrains. Mineralogical data from rovers allow us to better characterize mineral formation mechanisms by identifying mineral assemblages and placing them in geologic context using outcrop- to grain-scale images. TIR and Mössbauer data from the Mars Exploration Rovers helped identify an ancient dune-interdune playa environment with multiple episodes of groundwater at Meridiani Planum and volcanism-induced hydrothermalism at Gusev crater. The CheMin X-ray diffractometer on the Mars Science Laboratory Curiosity rover in Gale crater is the first fully quantitative mineralogical instrument sent to another planetary surface. CheMin data allow the quantification of minerals and X-ray amorphous materials with a mineral detection limit of <1 wt.% and provide crystal chemistry of major phases from refined unit-cell parameters. CheMin has revealed local mineralogical changes in ancient sedimentary rocks not seen from orbit and helped identify habitable environments. Throughout the 600+ m of vertical stratigraphy studied so far, changes in clay mineralogy, Fe-oxides/oxyhydroxides, sulfates, and carbonates demonstrate a long history of surface and groundwater at Gale crater with variable salinity, pH, Eh, and temperature. Recent CheMin data document a decrease in clay minerals and an increase in sulfate minerals in younger strata that corresponds with a change from fluvio-lacustrine to eolian depositional environments, potentially documenting a change to a drier climate across the planet.

E. B. Rampe↗
NASA NTRS1975

Contamination Control in Hybrid Microelectronic Modules. Part 1: Identification of Critical Process and Contaminants

Various hybrid processing steps, handling procedures, and materials are examined in an attempt to identify sources of contamination and to propose methods for the control of these contaminants. It is found that package sealing, assembly, and rework are especially susceptible to contamination. Moisture and loose particles are identified as the worst contaminants. The points at which contaminants are most likely to enter the hybrid package are also identified, and both general and specific methods for their detection and control are developed. In general, the most effective controls for contaminants are: clean working areas, visual inspection at each step of the process, and effective cleaning at critical process steps. Specific methods suggested include the detection of loose particles by a precap visual inspection, by preseal and post-seal electrical testing, and by a particle impact noise test. Moisture is best controlled by sealing all packages in a clean, dry, inert atmosphere after a thorough bake-out of all parts.

Himmel, R. P.↗
NASA NTRS1975

The role of dust in cosmogony

A discussion is given of the production of interstellar grain cores from stellar material, the gain and loss of grain mantles in interstellar space, chemical transformations in these grains when they become part of the primitive solar nebula, and the identification of these grains with interplanetary dust derived from comets and with the matrix material in meteorites. Thus, this paper proposes a common cosmogonic framework relating studies of interstellar and interplanetary grains.

Cameron, A. G. W.↗
NASA NTRS2011

TPSAS-NF1676L-12587-DND

Increased use of integral structures and sensory materials in new aerospace vehicles provides potential to reduce assembly time, reduce damage initiation features, and enhance identification of damage as compared to current built up structures. In this work the nondestructive evaluation requirements of these next generation materials and structures is examined. In particular, electromagnetic methods are explored for the characterization of residual stresses in integral structures and for the characterization embedded sensory alloy particles in an aluminum alloy matrix.

Russell A Wincheski↗
NASA NTRS2023

Additive Manufacturing of Oxide Dispersion Strengthened Multi Principle Element Alloys for Future Aerospace Applications

Oxide Dispersion Strengthened (ODS) materials have long been of interest for their high temperature applications, and additive manufacturing enables their manufacturing viability. The ODS multi-principle element alloy NiCoCr was prepared using powder metallurgy techniques, additively manufactured, and evaluated for its processingmicrostructure-property relationships. The high temperature foundations of nickel-base superalloys and ODS materials were combined with the manufacturing advantages of 3D printing and the chemical simplicity of NiCoCr to inspire this work, which was divided into powder and printed material assessments. The project was achieved through multiple iterative project loops to assess the processing parameters’ impact on the microstructure and mechanical properties of the feedstock powder and printed material. The powder investigations (Chapter 3) focused on understanding the oxide coating that formed on the metal powder following acoustic mixing. Time of Flight Secondary Ion Mass Spectrometry was used to semi-quantitatively assess the amount of yttrium on the surface of the mixed powders, and indicated that a combination of higher mixing condition energy and moderate mixing time resulted in the most oxide coating on the NiCoCr powder. The results were supported by a qualitative assessment of scanning electron images of coated powder particles. Following mixing, the ODS NiCoCr was consolidated by Laser Powder Bed Fusion. The evaluations of the printed material (Chapter 4) frst considered screening experiments including Archimedes’ density, porosity, and grain size and number metrics from electron backscatter diffraction data. After the ideal additive manufacturing parameters were identifed, both the oxide homogeneity and yield strength were discussed for the idealized printed material. Overall, the project suggests that the combined use of qualitative or semi-quantitative powder surface analysis with Archimedes’ density analyses can be a valid high-throughput technique which can lead to process optimization of Laser Powder Bed Fusion additively manufactured ODS material.

Laura G Wilson↗
NASA NTRS1989

Boundary estimation problems arising in thermal tomography

Problems on the identification of two-dimensional spatial domains arising in the detection and characterization of structural flaws in materials are considered. For a thermal diffusion system with external boundary input, observations of the temperature on the surface are used in a output least squares approach. Parameter estimation techniques based on the method of mappings are discussed and approximation schemes are developed based on a finite element Galerkin approach. Theoretical convergence results for computational techniques are given and the results are applied to experimental data for the identification of flaws in the thermal testing of materials.

Banks, H. T.↗
NASA NTRS1980

Advanced screening of electrode couples

The chromium (Cr(3+)/Cr(2+)) redox couple (electrolyte and electrode) was investigated to determine its suitability as negative electrode for the iron (Fe(3+)/Fe(2+))-chromium (Cr(3+)/Cr(2+)) redox flow battery. Literature search and laboratory investigation established that the solubility and stability of aqueous acidic solutions of chromium(3) chloride and chromium(2) chloride are sufficient for redox battery application. Four categories of electrode materials were tested; namely, metals and metalloid materials (elements and compounds), alloys, plated materials, and Teflon-bonded materials. In all, the relative performance of 26 candidate electrode materials was evaluated on the basis of slow scan rate linear sweep voltammetry in stirred solution. No single material tested gave both acceptable anodic an acceptable cathodic performance. However, the identification of lead as a good cathodic electrocatalyst and gold as a good anodic electrocatalyst led to the invention of the lead/gold combination electrocatalyst. This type of catalyst can be fabricated in several ways and appears to offer the advantages of each metal without the disadvantages associated with their use as single materials. This lead/gold electrocatalyst was tested by NASA-Lewis Research Center in complete, flowing, redox batteries comprising a stack of several cells. A large improvement in the battery's coulombic and energy efficiency was observed.

Giner, J. D.↗
NASA NTRS1930

Identification of Aircraft Tubing by Rockwell Test

Seamless steel tubing is today the principal material of construction for aircraft. The commercial grade of tubing containing about 0.10 to 0.20% carbon at first used is being superseded by two grades which are approved by the army and navy, and which are also becoming standard for commercial airplanes.

Knerr, Horace C.↗
NASA NTRS2011

Structural Framework for Flight: NASA's Role in Development of Advanced Composite Materials for Aircraft and Space Structures

This serves as a source of collated information on Composite Research over the past four decades at NASA Langley Research Center, and is a key reference for readers wishing to grasp the underlying principles and challenges associated with developing and applying advanced composite materials to new aerospace vehicle concepts. Second, it identifies the major obstacles encountered in developing and applying composites on advanced flight vehicles, as well as lessons learned in overcoming these obstacles. Third, it points out current barriers and challenges to further application of composites on future vehicles. This is extremely valuable for steering research in the future, when new breakthroughs in materials or processing science may eliminate/minimize some of the barriers that have traditionally blocked the expanded application of composite to new structural or revolutionary vehicle concepts. Finally, a review of past work and identification of future challenges will hopefully inspire new research opportunities and development of revolutionary materials and structural concepts to revolutionize future flight vehicles.

Tenney, Darrel R.↗
NASA NTRS1995

Laboratory comparisons of organic materials to interstellar dust and the Murchison meteorite

Spectra of objects which lie along several lines of sight through the diffuse interstellar medium (DISM) reveal an absorption feature near 3.4 micrometers, which has been attributed to saturated aliphatic hydrocarbons on interstellar grains. The similarity of the absorption bands near 3.4 micrometers (2950 cm-1) along different lines of sight indicates that the carrier of this band lies in the diffuse dust. Several materials have been proposed as "fits" to the 3.4 micrometers feature over the years. A comparison of these identifications is presented. These comparisons illustrate the need for high resolution, high signal-to-noise observational data as a means of distinguishing between laboratory organics as matches to the interstellar material. Although any material containing hydrocarbons will produce features in the 3.4 micrometers region, the proposed "matches" to the DISM do differ in detail. These differences may help in the analyses of the chemical composition and physical processes which led to the production of the DISM organics, although ISO Observations through the 5-8 micrometers spectral region are essential for a definitive identification. A remarkable similarity between the spectrum of the diffuse dust and an organic extract from the Murchison meteorite suggests that some of the interstellar organic material may be preserved in primitive solar system bodies. The 3.4 micrometers absorption feature (in the rest frame) has recently been detected in external galaxies, indicating the widespread availability of organic material for incorporation into planetary systems.

NASA Center ARC↗
NASA NTRS1996

Damage accumulation in closed cross-section, laminated, composite structures

The need for safe, lightweight, less expensive, and more reliable launch vehicle components is being driven by the competitiveness of the commercial launch market. The United States has lost 2/3 of the commercial lunch market to Europe. As low cost Russian and Chinese vehicles become available, the US market share could be reduced even further. This international climate is driving the Single Stage To Orbit (SSTO) program at NASA. The goal of the SSTO program is to radically reduce the cost of safe, routine transportation to and from space with a totally reusable launch vehicle designed for low-cost aircraft-like operations. Achieving this goal will require more efficient uses of materials. Composite materials can provide this program with the material and structural efficiencies needed to stay competitive in the international launch market place. In satellite systems the high specific properties, design flexibility, improved corrosion and wear resistance, increased fatigue life, and low coefficient of thermal expansion that are characteristic of composite materials can all be used to improve the overall satellite performance. Some of the satellites that may be able to take advantage of these performance characteristics are the Tethered Satellite Systems (TOSCIFER, AIRSEDS, TSS2, SEDS1, and SEDS2), AXAF, GRO, and the next generation Hubble Space Telescope. These materials can also be utilized in projects at the NASAIMSFC Space Optics Technology and System Center of Excellence. The successful implementation of composite materials requires accurate performance characterization. Materials characterization data for composite materials is typically generated using flat coupons of finite width. At the free edge of these coupons the stress state is exacerbated by the presence of stiffness and geometric discontinuities. The exacerbated stress state has been shown to dominate the damage accumulation in these materials and to have a profound affect on the material constants. Space structures typically have closed cross-sections, absent of free edges. As a result, composite material characterization data generated using finite width flat specimens does not accurately reflect the performance of the composite materials used in a closed cross-section structural configuration. Several investigators have recognized the need to develop characterization techniques for composite materials in closed cross-sectioned structures. In these investigations test methods were developed and cylindrical specimens were evaluated. The behavior of the cylindrical specimens were observed to depart from behavior typical of flat coupons. However, no attempts were made to identify and monitor the progression of damage in these cylindrical specimens during loading. The identification and monitoring of damage is fundamental to the characterization of composite materials in closed cross-section configurations. In the study reported here, a closed cross-sectioned test method was developed to monitor damage progression in 2 in. diameter cylindrical specimens and 1.5 in. finite width flat coupons subjected to quasi-static, tensile loading conditions. Damage in these specimen configurations was monitored using pulse echo ultrasonic, acoustic emission, and X-ray techniques.

Bucinell, Ronald B.↗
NASA NTRS1992

Remote Detection of Biological Particles and Chemical Plumes Using UV Fluorescence Lidar

A lidar system based on ultraviolet (UV) laser induced fluorescence (LIF) was developed for the remote detection of atmospherically dispersed biological particles and chemical vapors. This UV fluorescence lidar has many potential applications for monitoring environmental pollution, industrial waste emission, agricultural insect control, illicit chemical processing, and military defense operations. The general goal of this work is to investigate the research issues associated with the long range detection and identification of chemicals, e.g. aromatic solvents and chemical precursors, and biological materials, e.g. bacillus thuringiensis (BT) and bacillus globiggi (BG). In the detection of biological particulates, we are particularly interested in extending the detection range of an existing solar-blind 248-nm lidar system. We are investigating the use of longer excitation laser wavelengths (i.e. lambda greater than 280-nm to have more favorable atmospheric light transmission characteristics) for improving detection range to better than 10 km. In the detection of chemical plumes, our main research objectives are to determine how accurately and sensitively a chemical plume can be located at range, and how well spectrally the chemical species can be measured to allow their identification.

J J Tiee↗
NASA NTRS1978

A review of electron bombardment thruster systems/spacecraft field and particle interfaces

This paper collates and summarizes information on the field and particle interfaces of electron bombardment ion thruster systems. Major areas discussed are the nonpropellant particles, neutral propellant, ion beam, low energy plasma, and fields. Spacecraft functions and subsystems reviewed are solar arrays, thermal control systems, optical sensors, communications, science, structures and materials, and potential control. An appendix is included to facilitate identification of specific interaction areas.

Byers, D. C.↗
NASA NTRS1982

Mineral identification from orbit - Initial results from the Shuttle multispectral infrared radiometer

The Shuttle multispectral IR radiometer (SMIRR) was designed to obtain surface reflectance data in ten spectral bands in order to evaluate the usefulness of a future imaging system for remote mineral identification. Attention was given to the 2.0-2.4 micron region, which has a wealth of spectral absorption features and appeared to have potential for the identification of CO3- and OH-bearing minerals such as the kaolinite and montmorillonite clays. SMIRR radiances were normalized by using a spectrum for dune sand collected in the Kharga Depression in Egypt. Direct identifications have been made of kaolinite-containing and carbonate material, indicating an exceptional potential for future orbital platform narrowband spectral imaging systems for mineralogical mapping.

Goetz, A. F. H.↗