Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “low pressure”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Southern Ocean Precipitation Characteristics Observed From CloudSat and Ground Instrumentation During the Macquarie Island Cloud & Radiation Experiment (MICRE): April 2016 to March 2017

A 1-year blended surface precipitation data set using Parsivel disdrometer, surface W-band radar, and tipping bucket measurements is produced for the Macquarie Island Cloud and Radiation Experiment (MICRE) and compared with retrievals from CloudSat (spaceborne 94 GHz radar). Surface precipitation was observed 44% ± 4% of the time between April 2016 and March 2017. Precipitation composed primarily of small particles (diameter <1 mm) occurred about 36% ± 2% of the time, constituting 10% of total accumulation. Remaining precipitation contained enough large particles such that the disdrometer could be used to identify the precipitation type as rain, ice, snow or wet snow. Seasonal and annual statistics on frequency of occurrence and accumulation for each precipitation type observed during MICRE are presented. Most ice and mixed phase precipitation was shallow, originating at a height of 3 km or lower, and occurred most often when Macquarie Island was to the northwest of the nearest cyclonic low-pressure center. In contrast, rain was more often deep and occurred most frequently when the island was to the southeast of cyclonic lows. A weak diurnal cycle in frequency and mean rate was present with a minimum between 12:00 and 14:00 local time and maximum between 03:00 and 06:00 local time. The CloudSat 2C-Precip-Column product missed the lightest precipitation (because the near-surface reflectivity is <-15 dBZ) and overestimated total liquid precipitation and occurrence of mixed phase precipitation, but captured reasonably well the distribution of rain rates for rates >0.5 mm/hr.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

Structural phase transition, s ± -wave pairing, and magnetic stripe order in bilayered superconductor La 3 Ni 2 O 7 under pressure

Motivated by the recently discovered high-T c superconductor La 3 Ni 2 O 7 , we comprehensively study this system using density functional theory and random phase approximation calculations. At low pressures, the Amam phase is stable, containing the Y 2- mode distortion from the Fmmm phase, while the Fmmm phase is unstable. Because of small differences in enthalpy and a considerable Y 2- mode amplitude, the two phases may coexist in the range between 10.6 and 14 GPa, beyond which the Fmmm phase dominates. In addition, the magnetic stripe-type spin order with wavevector (π, 0) was stable at the intermediate region. Pairing is induced in the s ± -wave channel due to partial nesting between the M = (π, π) centered pockets and portions of the Fermi surface centered at the X = (π, 0) and Y = (0, π) points. This resembles results for iron-based superconductors but has a fundamental difference with iron pnictides and selenides. Moreover, our present efforts also suggest La 3 Ni 2 O 7 is qualitatively different from infinite-layer nickelates and cuprate superconductors.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Pressure‐Dependent “Insulator–Metal–Insulator” Behavior in Sr‐Doped La 3 Ni 2 O 7

Abstract Recently, superconductivity at high temperatures is observed in bulk La 3 Ni 2 O 7−δ under high pressure. However, the attainment of high‐purity La 3 Ni 2 O 7−δ single crystals remains a formidable challenge. Here, the crystal structure and physical properties of single crystals of Sr‐doped La 3 Ni 2 O 7 synthesized at high pressure (20 GPa) and high temperature (1400 °C) are reported. Through single crystal X‐ray diffraction, it is shown that high‐pressure‐synthesized paramagnetic Sr‐doped La 3 Ni 2 O 7 crystallizes in an orthorhombic structure with Ni─O─Ni bond angles of 173.4(2)° out‐of‐plane and 175.0(2)°and 176.7(2)°in plane. The substitution of Sr alters in band filling and the ratio of Ni 2+ /Ni 3+ in Sr‐doped La 3 Ni 2 O 7 , aligning them with those of “La 3 Ni 2 O 7.05” , thereby leading to significant modifications in properties under high pressure relative to the unsubstituted parent phase. At ambient pressure, Sr‐doped La 3 Ni 2 O 7 exhibits insulating properties, and the conductivity increases as pressure goes up to 10 GPa. However, upon further increasing pressure beyond 10.7 GPa, Sr‐doped La 3 Ni 2 O 7 transits back from a metal‐like behavior to an insulator. The insulator–metal–insulator trend under high pressure dramatically differs from the behavior of the parent compound La 3 Ni 2 O 7−δ , despite their similar behavior in the low‐pressure regime. These experimental results underscore the considerable challenge in achieving superconductivity in nickelates.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Sulfur Polymers as Flexible Interfacial Additives for Low Stack-Pressure Solid-State Lithium-Ion Batteries

Solid-state batteries (SSBs) fabricated using sulfide solid electrolytes (SSEs) typically require cell stack-pressures in the range of tens to hundreds of megapascals to maintain effective interfacial contact and lithium-ion mobility across the full cell stack. These relatively high cell stack-pressures necessarily require additional cell components that reduce the delivered volumetric and gravimetric capacities of SSBs. This work has developed a novel sulfur polymer (polyS) that improves lithium-ion conductivity in SSBs at low cell stack-pressures, thereby directly targeting this technological limitation. Specifically, this work shows that polyS can be combined with the argyrodite Li6PS5Cl (LPSC) to form a stable composite SSE. By combining LPSC particles with a flexible additive that enhances interfacial contact at low pressures, this new polyS LPSC composite SSE material greatly improves ionic conductivity at cell stack-pressures below 2.0 MPa in comparison to conventional LPSC composites. Furthermore, this polyS LPSC composite can be used to fabricate a full SSB that cycles reversibly at only 1.6 MPa. Finally, this composite SSE exhibits self-healing behavior when combined with a lithium metal electrode, wherein lithium dendrites are oxidized to form passivating Li2S species that recover the cell from shorting.

ENERGY STORAGE↗
DOE OSTI2020

Oxygen Reduction Reaction Activity of Nanocolumnar Platinum Thin Films by High Pressure Sputtering

Nanocolumnar platinum thin films (Pt-TFs) were produced by high pressure sputtering (HIPS) and investigated as oxygen reduction reaction electrocatalysts for polymer electrolyte membrane fuel cells. Conventional high-density Pt-TF prepared by low pressure sputtering was also studied for comparison. Pt-TFs were deposited on a microporous layer (MPL)-like surface composed of carbon particles to mimic catalyst-coated gas diffusion electrodes. Electron microscopy imaging revealed that HIPS Pt-TFs developed a cauliflower-like columnar microstructure, which originated from a shadowing effect during HIPS. This shadowing effect is enhanced on the rough surface of the MPL-like carbon that leads to the nano-cauliflower formation. With this approach, we also aimed to relate the catalyst performance obtained by benchtop tests directly to membrane electrode assembly test results. The electrochemically active surface area of Pt-TFs increased from 10 to 19 m 2 /g with increasing sputter pressure. Specific activity of conventional high-density and nanocolumnar films were similar at ~600 μA/cm 2 , which is likely due to their similar crystal grain sizes, >5 nm. On the other hand, mass-specific (MA) activity values increased from ~0.06 A/mgPt for conventional Pt-TF to ~0.13 A/mgPt for HIPS Pt-TFs, which is consistent with the columnar microstructure of HIPS films providing a better catalyst utilization compared to conventional Pt-TF.

08 HYDROGEN↗
DOE OSTI2022

Pressure engineering of intertwined phase transitions in lanthanide monopnictide NdSb

Coexistence of non-trivial band topology and intrinsic magnetic order not only leads to emergent phenomena but also allows for the tunability of the exotic properties from different degrees of freedom. By performing transport measurements at synergetic extreme conditions, here we report on pressure engineering of intertwined structural, magnetic, and topological phase transitions in antiferromagnetic Dirac semimetal NdSb. We show that the original antiferromagnetic state is strengthened in the low pressure region while destabilized upon further compression close to the critical pressure when a structural transition from Fm-3m phase to P4/mmm phase takes place at P C ~ 18 GPa, forming a Ger-shaped evolution in response to magnetic field, pressure and temperature. Concomitant with the structural transition, NdSb simultaneously carries on a magnetic transition to the ferromagnetic state. Further, theoretical calculations unravel that the ferromagnetic tetragonal phase presents nontrivial features of Weyl fermions. These findings offer new important insight into the microscopic interplay among lattice, spin, and relativistic fermions in lanthanide monopnictides.

42 ENGINEERING↗
DOE OSTI2026

Vidyut3d: A GPU accelerated fluid solver for non-equilibrium plasmas on adaptive grids

We present the numerical methods, programming methodology, verification, and performance assessment of a non-equilibrium plasma fluid solver that can effectively utilize current and upcoming central processing and graphics processing unit (CPU+GPU) architectures, in this work. Our plasma fluid model solves the coupled conservation equations for species transport, electrostatic Poisson and electron temperature on adaptive Cartesian grids. Our solver is written using performance portable adaptive-grid/particle management library, AMReX, and is portable over widely available vendor specific GPU architectures. We present verification of our solver using method of manufactured solutions that indicate formal second order accuracy with central diffusion and fifth-order weighted-essentially-non-oscillatory (WENO) advection scheme. We also verify our solver with published literature on capacitive discharges and atmospheric pressure streamer propagation. We demonstrate the use of our solver on two 3D simulation cases: an atmospheric streamer propagation in Ar-H2 mixtures and a low pressure three-electrode radio frequency reactor. Our performance studies on three different CPU+GPU architectures indicate ~ 150-400X speed-up using AMD and NVIDIA GPUs per time step compared to a single CPU core for a 4 million cell simulation with 15 species.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2025

Future Spatially Explicit Patterns of Land Transitions in the United States With Multiple Stressors

Climate change, income and population growth, and changing diets are major drivers of the global food system with implications for land use change. Land use in the U.S. will be affected directly by local and regional forces and indirectly through international trade. In order to investigate the effects of several potential forces on land use changes in the U.S., we advanced capabilities in representing the interactions between natural and human systems by linking a multisectoral and multiregional socio-economic model of the world economy to a model that downscales land use to a 0.5°grid scale. This enables us to translate regional projections of future land use into higher-resolution representations of time-evolving land cover (effectively spatially explicit land use transitions). We applied the framework over the U.S., with a particular interest in the Mississippi River Basin and its four sub-basins, to consider how a range of global drivers affect land use and cover in the target regions. Our results show that under scenarios of high pressure on the world food system a comparative advantage in livestock production amplifies the recent trend toward less cropland and more pastures in the U.S. Under low pressures on the world food system agricultural land is used less intensively. However, there can be key differences among the various land-use transitions at the sub- basin scale. Overall, these results highlighted the need for high resolution details to explicitly understand the implications of land use change on environmental impacts such as carbon storage, soil erosion, chemical use, hydrology, and water quality.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

An investigation of shock-induced phase transition in soda-lime glass

There exists a large body of evidence from experiments and molecular dynamics simulations to suggest the occurrence of phase transitions in soda-lime glass (SLG) and other silica glasses subject to shock compression to pressures above 3 GPa. In light of these findings, the current work investigated the existence of phase transition in SLG using shock and release experiments. The experiments employed symmetric SLG–SLG impact to achieve complete unloading to zero stress after shock compression to stresses in the range of 3–7 GPa. The stress–strain response and the Lagrangian release wave speed behavior of SLG obtained from these experiments are seen to reveal a mismatch between the loading and unloading paths of the pressure–strain curve for the material, which serves as compelling evidence for the occurrence of a shock-induced phase transition in the material at relatively low pressures. Furthermore, the release wave speed vs strain data obtained from experiments were used to construct a methodology for modeling the shock and release behavior of SLG. Lastly, this scheme implemented in numerical simulations was able to capture the release behavior of shock compressed SLG, for which a robust and satisfactory model was previously unavailable.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2025

Vidyut3d: A Gpu Accelerated Fluid Solver for Non-Equilibrium Plasmas on Adaptive Grids

We present the numerical methods, programming methodology, verification, and performance assessment of a non-equilibrium plasma fluid solver that can effectively utilize current and upcoming central processing and graphics processing unit (CPU+GPU) architectures, in this work. Our plasma fluid model solves the coupled conservation equations for species transport, electrostatic Poisson and electron temperature on adaptive Cartesian grids. Our solver is written using performance portable adaptive-grid/particle management library, AMReX, and is portable over widely available vendor specific GPU architectures. We present verification of our solver using method of manufactured solutions that indicate formal second order accuracy with central diffusion and fifth-order weighted-essentially-non-oscillatory (WENO) advection scheme. We also verify our solver with published literature on capacitive discharges and atmospheric pressure streamer propagation. We demonstrate the use of our solver on two 3D simulation cases: an atmospheric streamer propagation in Ar-H2 mixtures and a low pressure twin electrode radio frequency reactor. Our performance studies on three different CPU+GPU architectures indicate approximately 150-400X speed-up using AMD and NVIDIA GPUs per time step compared to a single CPU core for a 4 million cell simulation with 15 species.

Sitaraman, Hariswaran↗
DOE OSTI2021

Detection of Aerosols at Microbar Pressures in an Exoplanet Atmosphere

The formation of hazes at microbar pressures has been explored by theoretical models of exoplanet atmospheres to explain Rayleigh scattering and/or featureless transmission spectra; however observational evidence of aerosols in the low-pressure formation environments has proved elusive. Here, we show direct evidence of aerosols existing at ~1 microbar pressures in the atmosphere of the warm sub-Saturn WASP-69b using observations taken with the Space Telescope Imaging Spectrograph and Wide Field Camera 3 instruments on the Hubble Space Telescope. The transmission spectrum shows a wavelength-dependent slope induced by aerosol scattering that covers 11 scale heights of spectral modulation. Drawing on the extensive studies of haze in our solar system, we model the transmission spectrum based on a scaled version of Jupiter’s haze-density profile to show that the WASP-69b transmission spectrum can be produced by scattering from an approximately constant density of particles extending throughout the atmospheric column from 40 millibar to microbar pressures. These results are consistent with theoretical expectations based on microphysics of the aerosol particles that have suggested haze can exist at microbar pressures in exoplanet atmospheres.

47 OTHER INSTRUMENTATION↗
DOE OSTI2020

On the pressure and temperature dependence of adsorption densities and other thermodynamic properties in gas shales

Black shale source rocks have become a key natural gas resource in the US and China. Unlike in conventional hydrocarbon reservoirs, a significant fraction of the gas in shales is adsorbed onto the inordinate specific surface areas (SSA) of micropores inside organic matter with densities exceeding those of bulk gas by an order of magnitude. Yet, the distribution of adsorbed versus bulk gas remains poorly understood. Experiments measure excess adsorption isotherms, which are corrected to absolute adsorption amounts by a factor that involves the density, &#x3C1; abs , of the adsorption layer(s). Constant values of &#x3C1; abs are widely used in the literature but, we argue, are inconsistent with the pressure- and temperature-dependence of adsorption behavior. In this work, we propose a more reliable approach that assumes a constant volume of each adsorption layer that can be determined from the SSA of the substrate. We measure nine high-pressure methane excess adsorption isotherms up to 15 MPa for three shale samples from China and Germany at temperatures of 65, 75, and 95 °C, and low-pressure carbon dioxide and nitrogen isotherms to estimate the SSA. We also investigate another 24 isotherms at 35, 50, and 60° C or 8 Chinese shale samples and 3 isotherms at 60, 90, and 120° C for an Argentinian shale sample from the literature. A new variation of the multi-layer Ono-Kondo lattice model is introduced to derive the temperature and pressure dependent adsorption layer densities, which are subsequently used to obtain the absolute adsorption isotherms of interest. Finally, this practical methodology has the potential to significantly improve our estimates of shale gas-in-place resources, and adsorption modeling more broadly.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Pressure-induced superconductivity in a novel germanium allotrope

High-pressure studies on elements play an essential role in superconductivity research, with implications for both fundamental science and applications. Here we report the experimental discovery of surprisingly low pressure driving a novel germanium allotrope into a superconducting state in comparison to that for α-Ge. Raman measurements revealed structural phase transitions and possible electronic topological transitions under pressure up to 58 GPa. Based on pressure-dependent resistivity measurements, superconductivity was induced above 2 GPa and the maximum T c of 6.8 K was observed under 4.6 GPa. Interestingly, a superconductivity enhancement was discovered during decompression, indicating the possibility of maintaining pressure-induced superconductivity at ambient pressure with better superconducting performance. Density functional theory analysis further suggested that the electronic structure of Ge (oP32) is sensitive to its detailed geometry and revealed that disorder in the β-tin structure leads to a higher T c in comparison to the perfect β-tin Ge.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2023

Wintertime synoptic patterns of midlatitude boundary layer clouds over the western North Atlantic: Climatology and insights from in-situ ACTIVATE observations

The winter synoptic evolution of the western North Atlantic and its influence on the atmospheric boundary layer is described by means of a regime classification based on Self Organizing Maps applied to 12 year of data (2009-2020). The regimes are classified into categories according to daily 600-hPa geopotential height: dominant ridge, trough to ridge eastward transition (trough-ridge), dominant trough, and ridge to trough eastward transition (ridge-trough). A fifth synoptic regime resembles the winter climatological mean. Coherent changes in sea-level pressure and large-scale winds are in concert with the synoptic regimes: 1) the ridge regime is associated with a well-developed anticyclone; 2) the trough-ridge gives rise to a low pressure center over the ocean, ascents, and northerly winds over the coastal zone; 3) trough is associated with the eastward displacement of a cyclone, coastal subsidence, and northerly winds, all representative characteristics of cold-air outbreaks; 4) the ridge-trough regime features the development of an anticyclone and weak coastal winds. Low clouds are characteristic of the trough regime, with both trough and trough-ridge featuring synoptic maxima in cloud droplet number concentration (N d ). The N d increase is primarily observed near the coast, concomitant with strong surface heat fluxes exceeding by more than 400 W m -2 compared to fluxes further east. Five consecutive days of aircraft observations collected during the ACTIVATE campaign corroborates the climatological characterization, confirming the occurrence of high N d for days identified as trough. This study emphasizes the role of boundary-layer dynamics and aerosol activation and their roles in modulating cloud microphysics.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

Improved Hydrogen Utilization and Carbon Recovery for Higher Efficiency Thermochemical Bio-oil Pathways

The goal of this project was to develop a novel integrated direct biomass liquefaction process with improved hydrogen utilization and better carbon efficiency compared to other thermochemical conversion technologies for advanced biofuels production. Reactive catalytic fast pyrolysis, or RCFP, combines a robust hydrodeoxygenation catalyst for in situ pyrolysis in an excess of hydrogen at atmospheric (low) pressure. RCFP was developed to leverage advantages from catalytic fast pyrolysis (process simplicity and improved bio-crude quality) and biomass hydropyrolysis (enhanced hydrodeoxygenation) to produce a thermally-stable, low oxygen containing bio-crude intermediate that can be upgraded in a single conventional hydroprocessing step to produce gasoline- and diesel-range hydrocarbons. In parallel, carbon lost to the aqueous phase was recovered as renewable methane from anaerobic digestion to offset fossil carbon required to meet the hydrogen demand of the integrated process.

09 BIOMASS FUELS↗
DOE OSTI2023

Toward an accurate equation of state and B1-B2 phase boundary for magnesium oxide up to terapascal pressures and electron-volt temperatures

By applying auxiliary-field quantum Monte Carlo, we calculate the equation of state (EOS) and B1-B2 phase transition of magnesium oxide (MgO) up to 1 TPa. Here, the results agree with available experimental data at low pressures and are used to benchmark the performance of various exchange-correlation functionals in density functional theory calculations. We determine PBEsol is an optimal choice for the exchange-correlation functional and perform extensive phonon and quantum molecular-dynamics calculations to obtain the thermal EOS. Our results provide a preliminary reference for the EOS and B1-B2 phase boundary of MgO from zero up to 10,500 K.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2024

Evaluating Pressure‐dependent Discharge Behavior of Foil Versus In situ Plated Lithium Metal Anodes in Solid‐State Batteries

Abstract Anode‐free manufacturing of solid‐state batteries (SSBs) shows promise to maximize energy density by eliminating excess lithium (Li) and simplifying battery production. However, high reversibility during discharge (stripping of Li) is necessary for long‐lifetime SSBs with a limited Li reservoir. Further, the plastic flow of Li changes depending on the Li thickness, leading to possible differences in discharge performance under stack pressure. This work investigates the pressure‐dependent discharge performance of anode‐free manufactured SSBs with in situ plated Li and compares the performance to that of conventional thick Li foil cells. Distinct stripping behavior is observed at low pressures (0–1 MPa), where Li diffusivity and initial interfacial contact may control accessible capacity, compared to high pressures (3–10 MPa) where mechanical deformation of Li likely governs stripping behavior. Analysis of impedance spectra collected during stripping shows that additional stack pressure delays the formation of deep, as opposed to lateral, voids in the Li anode. These results provide insights to guide the transition from thick Li foil anodes to anode‐free manufactured SSBs.

Haslam, Catherine G.↗