Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “linear equations”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14

Application of the TRPLT1 element to large amplitude free vibrations of plates

A finite element formulation is developed for analyzing large amplitude free flexural vibrations of thin plates in NASTRAN. Stress distributions in the plate, in addition to deflection shapes and nonlinear frequencies are determined. Linearized equations of motion governing large amplitude oscillations of plates and a linearized geometrical stiffness matrix are presented. The solution procedure and convergence characteristics are discussed. The quasi-linear geometrical stiffness matrix for an eighteen degree-of-freedom higher order triangular plate element is evaluated by using a seven-point numerical integration. Nonlinear frequencies for square, rectangular, rhombic, and isosceles triangular plates, with edges simply supported or clamped, are compared with earlier solutions. The present formulation is found to give results entirely adequate for engineering purposes.

Mei, C.↗

Rotordynamic analysis of a bearing tester

The properties of the solutions of a system of four coupled nonlinear differential equations that model the behavior of the rotating shaft of a bearing tester are studied. In particular, it is shown how the bounds for the rotations of these equations can be obtained from bounds for the solutions of the linearized equations. By studying the behavior of the Fourier transforms of the solution, the approach to the stability boundary can also be predicted. These conclusions are verified by means of numerical solutions of the equations, and of power spectrum density (PSD) plots.

Zalik, Richard A.↗

Marangoni Effects of a Drop in an Extensional Flow: The Role of Surfactant Physical Chemistry

While the changes in stresses caused by surfactant adsorption on non-deforming interfaces have been fairly well established, prior to this work, there were few studies addressing how surfactants alter stresses on strongly deforming interfaces. We chose the model problem of a drop in a uniaxial extensional flow to study these stress conditions To model surfactant effects at fluid interfaces, a proper description of the dependence of the surface tension on surface concentration, the surface equation of state, is required. We have adopted a surface equation of state that accounts for the maximum coverage limit; that is, because surfactants have a finite cross sectional area, there is an upper bound to the amount of surfactant that can adsorb in a monolayer. The surface tension reduces strongly only when this maximum coverage is approached. Since the Marangoni stresses go as the derivative of the surface equation of state times the surface concentration gradient, the non-linear equation of state determines both the effect of surfactants in the normal stress jump, (which is balanced by the product of the mean curvature of the interface times the surface tension), and the tangential stress jump, which is balanced by Marangoni stresses. First, the effects of surface coverage and intermolecular interactions among surfactants which drive aggregation of surfactants in the interface were studied. (see Pawar and Stebe, Physics of Fluids).

Stebe, Kathleen J.↗

Attitude control/momentum management of the Space Station Freedom for large angle torque-equilibrium-attitude configurations

An attitude-control and momentum-management (ACMM) system for the Space Station in a large-angle torque-equilibrium-attitude (TEA) configuration is developed analytically and demonstrated by means of numerical simulations. The equations of motion for a rigid-body Space Station model are outlined; linearized equations for an arbitrary TEA (resulting from misalignment of control and body axes) are derived; the general requirements for an ACMM are summarized; and a pole-placement linear-quadratic regulator solution based on scheduled gains is proposed. Results are presented in graphs for (1) simulations based on configuration MB3 (showing the importance of accounting for the cross-inertia terms in the TEA estimate) and (2) simulations of a stepwise change from configuration MB3 to the 'assembly complete' stage over 130 orbits (indicating that the present ACCM scheme maintains sufficient control over slowly varying Space Station dynamics).

Parlos, Alexander G.↗

A formalism for cosmic ray propagation studies

The continuity equation for cosmic ray propagation is used to derive a set of linear equations interrelating the fluxes of multiply charged nuclei as observed at any particular part of the galaxy. The derivation leads to model independent definitions for cosmic ray storage time, mean density of target nuclei and effective mass traversed. The set of equations form a common framework for comparisons of theories and observations. As an illustration, it is shown that there exists a large class of propagation models which give the same result as the exponential path length model. The formalism is shown to accommodate dynamic as well as equilibrium models of production and propagation.

Golden, R. L.↗

Iterative algorithms for large sparse linear systems on parallel computers

Algorithms for assembling in parallel the sparse system of linear equations that result from finite difference or finite element discretizations of elliptic partial differential equations, such as those that arise in structural engineering are developed. Parallel linear stationary iterative algorithms and parallel preconditioned conjugate gradient algorithms are developed for solving these systems. In addition, a model for comparing parallel algorithms on array architectures is developed and results of this model for the algorithms are given.

Adams, L. M.↗

Character and stability of axisymmetric thermal convection in spheres and spherical shells

The influence of shell size and mode of heating on the behavior and stability of axisymmetric, infinite Prandtl number convection in a spherical geometry is studied. Heating from within and below features convection onset governed by a self-adjoint system of equations and boundary conditions. For heating only from within or from below, linearized equations and boundary conditions are non-self-adjoint. Identification of the parameter which initiates the departure from self-adjointness, together with the properties of the self-adjoint solution, provide a basis for calculating the heat transfer characteristics of the non-self-adjoint situations. The investigations are an effort to develop a model for heat transfer in planetary interiors. Further development of the technique by modifying the Galerkin method by the introduction of diagonal mode truncation is suggested to permit the consideration of higher values of the Rayleigh numbers, i.e., those more commensurate with terrestrial planet mantles.

Zebib, A.↗

Loads and Deformations of Buckled Rectangular Plates

The nonlinear large-deflection equations of von Karman for plates are converted into a set of linear equations by expanding the displacements Into a power series in terms of an arbitrary parameter. The postbuckling behavior of simply supported rectangular plates subjected to longitudinal compression and subject to a uniform temperature rise is investigated in detail by solving the first few of the equations. Experimental data are presented for the compression problem. Comparisons are made for total shortening and local strains and deflections which indicate good agreement between experimental and theoretical results.

Stein, Manuel↗

Almost periodic solutions to difference equations

The theory of Massera and Schaeffer relating the existence of unique almost periodic solutions of an inhomogeneous linear equation to an exponential dichotomy for the homogeneous equation was completely extended to discretizations by a strongly stable difference scheme. In addition it is shown that the almost periodic sequence solution will converge to the differential equation solution. The preceding theory was applied to a class of exponentially stable partial differential equations to which one can apply the Hille-Yoshida theorem. It is possible to prove the existence of unique almost periodic solutions of the inhomogeneous equation (which can be approximated by almost periodic sequences) which are the solutions to appropriate discretizations. Two methods of discretizations are discussed: the strongly stable scheme and the Lax-Wendroff scheme.

Bayliss, A.↗

Oscillations and stability of numerical solutions of the heat conduction equation

The mathematical model and results of numerical solutions are given for the one dimensional problem when the linear equations are written in a rectangular coordinate system. All the computations are easily realizable for two and three dimensional problems when the equations are written in any coordinate system. Explicit and implicit schemes are shown in tabular form for stability and oscillations criteria; the initial temperature distribution is considered uniform.

Kozdoba, L. A.↗

Dynamic model for an instrument pointing system

The instrument pointing system concept discussed in the present paper was developed for Spacelab missions. The system is mounted on soft shockmounts to minimize Shuttle disturbances (such as man motion, thruster firings, etc.) and to reduce the effect of large center of mass offsets between the instrument and the pointing system gimbal axes. The instrument pointing system is soft mounted to the Spacelab pallet located in the Orbiter payload bay. The nonlinear model, incorporating the dynamic equations of motion, the controller equations and the definition of sensor dynamics and gimbal bearing friction, is given, along with a system of linearized equations of motion of the Space Shuttle Orbiter and instrument pointing system (linearized model).

Howell, J. T.↗

Linear systems of equations solved using mathematical algorithms

New mathematical algorithm solves linear systems of equations, AX equals B, and preserves the integer properties of the coefficients. The algorithms presented can also be used for the efficient evaluation of determinates and their leading minors.

Bareiss, E. H.↗

Theoretical Determination of Lifetime of Compressed Plates at Elevated Temperatures

A method for the theoretical determination of the lifetime of com- pressed plates at elevated temperatures is presented. In this approach, linearized equations are used throughout with the assumption that the plate material is a standard linear solid. The critical time (lifetime) is determined by reducing the time-dependent behavior to the time- independent response of purely elastic buckling. Theoretically predicted lifetimes of 2024-T3 (formerly 24S-T3) aluminum-alloy plates at 450 F are compared with experimental values obtained in previous work.

Herrmann, George↗

Unsteady thermocapillary migration of bubbles

Upon the introduction of a gas bubble into a liquid possessing a uniform thermal gradient, an unsteady thermo-capillary flow begins. Ultimately, the bubble attains a constant velocity. This theoretical analysis focuses upon the transient period for a bubble in a microgravity environment and is restricted to situations wherein the flow is sufficiently slow such that inertial terms in the Navier-Stokes equation and convective terms in the energy equation may be safely neglected (i.e., both Reynolds and Marangoni numbers are small). The resulting linear equations were solved analytically in the Laplace domain with the Prandtl number of the liquid as a parameter; inversion was accomplished numerically using a standard IMSL routine. In the asymptotic long-time limit, the theory agrees with the steady-state theory of Young, Goldstein, and Block. The theory predicts that more than 90 percent of the terminal steady velocity is achieved when the smallest dimensionless time, i.e., the one based upon the largest time scale-viscous or thermal-equals unity.

Dill, Loren H.↗

An efficient formulation and implementation of the analytic energy gradient method to the single and double excitation coupled-cluster wave function - Application to Cl2O2

The analytic energy gradient for the single and double excitation coupled-cluster (CCSD) wave function has been reformulated and implemented in a new set of programs. The reformulated set of gradient equations have a smaller computational cost than any previously published. The iterative solution of the linear equations and the construction of the effective density matrices are fully vectorized, being based on matrix multiplications. The new method has been used to investigate the Cl2O2 molecule, which has recently been postulated as an important intermediate in the destruction of ozone in the stratosphere. In addition to reporting computational timings, the CCSD equilibrium geometries, harmonic vibrational frequencies, infrared intensities, and relative energetics of three isomers of Cl2O2 are presented.

Rendell, Alistair P.↗

On the prediction of velocity fields from redshift space galaxy samples

We present a new method for recovering the underlying velocity field from an observed distribution of galaxies in redshift space. The method is based on a kinematic Zel'dovich relation between the velocity and density fields in redshift space. This relation is expressed in a differential equation slightly modified from the usual Poisson equation and which depends nontrivially on Beta identically equal to Omega(exp 0.6)/b. The linear equation can be readily solved by standard techniques of separation of variables by means of spherical harmonics. One can also include a term describing the 'rocket effect' discussed by Kaiser (1987). From this redshift space information alone, one can generate a prediction of the peculiar velocity field for each harmonic (l, m) as a function of distance. We note that for the quadrupole and higher order moments, the equation is a boundary value problem with solutions dependent on both the interior and exterior mass distribution. However, for a shell at distance r, the dipole, as well as the monopole, of the velocity field in the Local Group frame is fully determined by the interior mass distribution. This implies that the shear of the measured velocity field, when fitted to a dipole distortion, should be aligned and consistent with the gravity field inferred from the well determined local galaxy distribution. As a preliminary application we compute the velocity dipole of distant shells as predicted from the 1.2 Jy IRAS survey compared to the measured velocity dipole on shells, as inferred from a recent POTENT analysis. The coherence between the two fields is good, yielding a best estimate of Beta = 0.6 +/- 0.2.

Nusser, Adi↗

Interpolation using surface splines.

A surface spline is a mathematical tool for interpolating a function of two variables. It is based upon the small deflection equation of an infinite plate. The surface spline depends upon the solution of a system of linear equations, and thus, will ordinarily require the use of a digital computer. The closed form solution involves no functions more complicated than logarithms, and is easily coded. Several modifications which can be incorporated are discussed.

Harder, R. L.↗