Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “laser plasma interactions”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Effect of nuclear charge on laser-induced fusion enhancement in advanced fusion fuels

Here, based on the preliminary work done in a previous paper [Phys. Rev. C 105, 054001 (2022)], we investigate the effects of laser-induced fusion rate enhancements of different fusion fuels. In the aforementioned work, which considered $_{1}^{2}$H-$_{1}^{3}$H (D-T) and DHe 3 fusion, it was observed that a larger product of charge numbers of the fusion reactants leads to an increased laser-induced enhancement to the fusion cross section for static external electric fields. We investigate whether this trend persists for DT, DHe 3 , and pB 11 fusion for dynamical electric fields, using the semiclassical approaches of the Wentzel-Kramers-Brillouin method and the imaginary-time method, as well as the Kramers- Henneberger method, and the Volkoff-state approximation. We find that the fusion cross section of pB 11 indeed exhibits the largest relative enhancement for all laser parameters considered and may even surpass the cross section of DT and DHe 3 fusion.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2020

Nonlinear transmission of laser light through coronal plasma due to self-induced incoherence

The success of direct laser-driven inertial con nement fusion (ICF) relies critically on the efficient coupling of laser light to plasma. At ignition scale, the absolute stimulated Raman scattering (SRS) instability can severely inhibit this coupling by redirecting and strongly depleting laser light. This article describes a new dynamic saturation regime of the absolute SRS instability near one quarter of the critical density. The saturation occurs when spatiotemporal ion-acoustic fluctuations in the plasma density detune the instability resonance. Here, the dynamic saturation mitigates the strong depletion of laser light and enhances its transmission through the instability region, explaining the coupling of laser light to ICF targets at higher plasma densities.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2021

Dynamics of laser-generated magnetic fields using long laser pulses

In this work, we report on the experimental investigation of magnetic field generation with a half-loop gold sheet coil driven by long-duration (10 ns) and high-power (0.5 TW) laser pulses. The amplitude of the magnetic field was characterized experimentally using proton deflectometry. The field rises rapidly in the first 1 ns of laser irradiation, and then increases slowly and continuously up to 10 ns during further laser irradiation. The transient dynamics of current shape were investigated with a two-dimensional (2D) numerical simulation that included Ohmic heating of the coil and the resultant change of electrical resistivity determined by the coil material temperature. The numerical simulations show rapid heating at the coil edges by current initially localized at the edges. This current density then diffuses to the central part of the sheet coil in a way that depends both on normal current diffusion as well as temporal changes of the coil resistance induced by the Ohmic heating. The measured temporal evolution of the magnetic field is compared with a model that determines a solution to the coil current and voltage that is consistent with a plasma diode model of the drive region and a 2D simulation of current diffusion and dynamic resistance due to Ohmic heating in the laser coil.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2021

Improved modeling of the solid-to-plasma transition of polystyrene ablator for laser direct-drive inertial confinement fusion hydrocodes

We report that the target performance of laser direct-drive inertial confinement fusion (ICF) can be limited by the development of hydrodynamic instabilities resulting from the nonhomegeneous laser absorption at the target surface, i.e., the laser imprint on the ablator. To understand and describe the formation of these instabilities, the early ablator evolution during the laser irradiation should be considered. In this work, an improved modeling of the solid-to-plasma transition of a polystyrene ablator for laser direct-drive ICF is proposed. This model is devoted to be implemented in hydrocodes dedicated to ICF which generally assume an initial plasma state. The present approach consists of the two-temperature model coupled to the electron, ion and neutral dynamics including the chemical fragmentation of polystyrene. The solid-to-plasma transition is shown to significantly influence the temporal evolution of both free electron density and temperatures, which can lead to different shock formation and propagation compared with an initial plasma state. The influence of the solid-to-plasma transition on the shock dynamics is evidenced by considering the scaling law of the pressure with respect to the laser intensity. The ablator transition is shown to modify the scaling law exponent compared with an initial plasma state.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Super-resonant four-photon collinear laser frequency multiplication in plasma

Resonant four-photon scattering could nearly double frequencies of intense laser pulses in plasma. However, transverse slippage between pulses presents a technological challenge, while collinear four-photon scattering is forbidden for classical light dispersion in plasma. Nonlinear renormalization of intense laser pulses can enable collinear four-photon resonance. However, such a very intensity-sensitive resonance is difficult to maintain for evolving pulses. Remarkably, there is a lower-dimensionality submanifold of the resonant four-photon manifold where the evolving pulses stay in resonance. Furthermore this could enable an all-optical frequency doubling of mildly relativistic-intense laser pulses in collinear geometry, advantageously free of the transverse slippage challenges.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2022

Nonlinear Thomson scattering with ponderomotive control

In nonlinear Thomson scattering, a relativistic electron re-radiates the photons of a laser pulse, converting optical light to x rays or beyond. While this extreme frequency conversion offers a promising source for probing high-energy-density materials and driving uncharted regimes of nonlinear quantum electrodynamics, conventional nonlinear Thomson scattering has inherent tradeoffs in its scaling with laser intensity. Here we discover that the ponderomotive control afforded by spatiotemporal pulse shaping enables novel regimes of nonlinear Thomson scattering that substantially enhance the scaling of the radiated power, emission angle, and frequency with laser intensity. By appropriately setting the velocity of the intensity peak, a spatiotemporally shaped pulse can increase the power radiated by orders of magnitude. Here, the enhanced scaling with laser intensity allows for operation at significantly lower electron energies or intensities.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2022

Independent-hot-spot approach to multibeam laser-plasma instabilities

The independent-hot-spot model is used to develop an analytic formulation for multibeam laser-plasma instabilities in inhomogeneous plasmas. The model is applied to the absolute two-plasmon-decay instability and shows good agreement with simulations and experiments. Furthermore, the success of the model indicates the emergence of single-speckle behavior for sufficiently large speckles sizes.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2022

Spectral studies of soft x-ray radiation of laser-produced plasma of various target materials in a wide spectral range

Here, the work is devoted to experimental study of soft X-ray radiation spectra of laser produced plasma in a wide spectral range 5–100 Å at the “Kamerton” facility (GPI) with pulse duration 70 ps, pulse energy 1–5 J, wavelength 0.53 microns at which the laser intensity (power flux density) of 7×10 14 – 3.5×10 15 W/cm 2 was achieved. A spectrograph was used, which had transmission diffraction gratings with a ratio of the elementary gap to the period of the structure of 0.25 and 0.41. Detection was performed on both UV-4 X-ray photo film and Fuji TR fluorescent imaging plate. Solid samples from Al, Si, Ti, Cu, Ta and W were used as targets. The ionization states of the plasma corresponding to various electron temperatures were calculated, which made it possible to estimate the electron temperature by comparison these calculation results with the experimentally obtained spectra. The estimated electron temperature, which depends on the laser pulse energy and the target material, varied within the range of 100–450 eV. To verify the correctness of the temperature estimations obtained by such comparison a numerical simulation of plasma radiation was carried out by the use of PrismSPECT computer program. It was found that the results of this simulation are in a good agreement with estimations on the base of experimentally obtained spectra. The analysis of these spectra showed that tantalum, tungsten or titanium targets are the best candidates among the tested ones for the use of laser produced plasma as a radiation source in the "water window" spectral range (23–44 Å) for applications in biology and medicine.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2022

Injection of electron beams into two laser wakefields and generation of electron rings

Throughout this work, mutual injection of electron beams into two laser plasma wakefields was observed experimentally when driving laser pulses interfered in plasma at a small crossing angle and were slightly relatively delayed, approximately by one pulse duration. Particle-in-cell simulations revealed that the mutual injection was sensitive to the spatial overlap of the laser pulses, which therefore could be used to control the mutual injection. The dual synchronized, femtosecond electron beams are potentially useful for pump-probe experiments in ultrafast science. In addition, out-of-axis ring-shaped electron beams were detected in both experiments and simulations.

47 OTHER INSTRUMENTATION↗
DOE OSTI2022

Hot-electron preheat and mitigation in polar-direct-drive experiments at the National Ignition Facility

Target preheat by superthermal electrons from laser–plasma instabilities is a major obstacle to achieving thermonuclear ignition via direct-drive inertial confinement fusion at the National Ignition Facility (NIF). Polar-direct-drive surrogate plastic implosion experiments were performed on the NIF to quantify preheat levels at ignition-relevant scale and develop mitigation strategies. Here, the experiments were used to infer the hot-electron temperature, energy fraction, divergence, and to directly measure the spatial hot-electron energy deposition profile inside the imploding shell. Silicon layers buried in the ablator are shown to mitigate the growth of laser–plasma instabilities and reduce preheat, providing a promising path forward for ignition designs at an on-target intensity of about 10 15 W/cm 2 .

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2022

Predicting hot electron generation in inertial confinement fusion with particle-in-cell simulations

A series of two-dimensional particle-in-cell simulations with speckled laser drivers was carried out to study hot electron generation in direct-drive inertial confinement fusion on OMEGA. Scaling laws were obtained for hot electron fraction and temperature as functions of laser/plasma conditions in the quarter-critical region. Using these scalings and conditions from hydro simulations, the temporal history of hot electron generation can be predicted. The scalings can be further improved to predict hard x-rays for a collection of OMEGA warm target implosions within experimental error bars. Furthermore, these scalings can be readily implemented into inertial confinement fusion design codes.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2023

Stability of the modulator in a plasma-modulated plasma accelerator

We explore the regime of operation of the modulator stage of a recently proposed laser-plasma accelerator scheme [Phys. Rev. Lett. 127, 184801 (2021)], dubbed the plasma-modulated plasma accelerator (P-MoPA). The P-MoPA scheme offers a potential route to high-repetition-rate, GeV-scale plasma accelerators driven by picosecond-duration laser pulses from, for example, kilohertz thin-disk lasers. The first stage of the P-MoPA scheme is a plasma modulator in which a long, high-energy “drive” pulse is spectrally modulated by copropagating in a plasma channel with the low-amplitude plasma wave driven by a short, low-energy “seed” pulse. The spectrally modulated drive pulse is converted to a train of short pulses, by introducing dispersion, which can resonantly drive a large wakefield in a subsequent accelerator stage with the same on-axis plasma density as the modulator. In this paper we derive the 3D analytic theory for the evolution of the drive pulse in the plasma modulator and show that the spectral modulation is independent of transverse coordinate, which is ideal for compression into a pulse train. We then identify a transverse mode instability (TMI), similar to the TMI observed in optical fiber lasers, which sets limits on the energy of the drive pulse for a given set of laser-plasma parameters. We compare this analytic theory with particle-in-cell (PIC) simulations and find that even higher energy drive pulses can be modulated than those demonstrated in the original proposal.

43 PARTICLE ACCELERATORS↗
DOE OSTI2023

Thermal conductivity of a laser plasma

Here, we present a model of the electron thermal conductivity of a laser-produced plasma. The model, supported by Vlasov–Fokker–Planck simulations, predicts that laser absorption reduces conductivity by forcing electrons out of a Maxwell–Boltzmann equilibrium, which results in depletion of both low-velocity bulk electrons and high-velocity tail electrons. We show that both the bulk and tail electrons approximately follow super-Gaussian distributions, but with distinct exponents that each depend on the laser intensity and wavelength through the parameter a = Zv$^{2}_{E}$/v$^{2}_{T}$. For a value of a = 0.5, tail depletion reduces the thermal conductivity to half its zero-intensity value. We present our results as simple analytic fits that can be readily implemented in any radiation-hydrodynamics code or used to correct the local limit of non-local conduction models.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2024

Three-dimensional modeling of a plasma in a strong azimuthal magnetic field

Three-dimensional magnetohydrodynamic (MHD) simulations are able to model the generation of disc-shaped plasma, driven by laser ablation from a current carrying rod in a pulsed-power machine producing azimuthal magnetic fields of 2–3 MG. The plasma at such extreme conditions is unique in that the parameter space for the plasma β and Hall parameter χ transition from below unity to greater than unity at different stages of the plasma generation. In simulations, the formation of the plasma disc in the azimuthal direction, is driven by heat flux from the laser spot and depends on the set of transport coefficients used in simulations. The most recent set of transport coefficients leads to the formation of plasma ejecta at the back end of the rod, that qualitatively matches experiments. Specifically, the cross-gradient Nernst effect, which twists magnetic field, is shown to have a large effect on the shape of the back end ejecta. In the direction along the axis of the rod there is propagation of perturbations from the disc as observed in experiments. In simulations the period of temperature perturbations is in good agreement with experimental results. Furthermore, an instability due to coupling of heat flux and the magnetic field advection provides a possible explanation for perturbation growth along the axis of the rod, and the instability growth rate is consistent with experimental results.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2024

Pseudospectral particle-in-cell formulation with arbitrary charge and current-density time dependencies for the modeling of relativistic plasmas

This paper introduces a formulation of the particle-in-cell (PIC) method for the modeling of relativistic plasmas, that leverages the ability of the pseudospectral analytical time-domain solver (PSATD) to handle arbitrary time dependencies of the charge and current densities during one PIC cycle (applied to second-order polynomial dependencies here). Here, the formulation is applied to a modified set of Maxwell's equations that was proposed earlier in the context of divergence cleaning, and to recently proposed extensions of the PSATD-PIC algorithm. Detailed analysis and testings revealed that, under some condition, the formulation can expand the range of numerical parameters under which PIC simulations are stable and accurate when modeling relativistic plasmas such as, e.g., plasma-based particle accelerators.

43 PARTICLE ACCELERATORS↗
DOE OSTI2024

Pump depletion and the Raman gap in ignition-scale plasmas

Laser-plasma instabilities under ignition conditions for direct-drive inertial confinement fusion are studied using two-dimensional Particle-in-Cell simulations with a combination of in-plane (PP) and out-of-the-plane (SP) lasers. The results show that stimulated Raman side scattering can induce significant pump depletion and form a gap in the Raman scattered light spectra that have been observed in experiments.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗