Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “large displacement”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14

Preferential rifting of continents - A source of displaced terranes

Lithospheric rifting, while prevalent in the continents, rarely occurs in oceanic regions. To explain this preferential rifting of continents, the total strength of different lithospheres is compared by integrating the limits of lithospheric stress with depth. Comparisons of total strength indicate that continental lithosphere is weaker than oceanic lithosphere by about a factor of three. Also, a thickened crust can halve the total strength of normal continental lithosphere. Because the weakest area acts as a stress guide, any rifting close to an ocean-continent boundary would prefer a continental pathway. This results in the formation of small continental fragments or microplates that, once accreted back to a continent during subduction, are seen as displaced terranes. In addition, the large crustal thicknesses associated with suture zones would make such areas likely locations for future rifting episodes. This results in the tendency of new oceans to open along the suture where a former ocean had closed.

Vink, G. E.↗

Mesoscale Variations of Biogeochemical Properties in the Sargasso Sea

A mesoscale resolution biogeochemical survey was carried out in the vicinity of the US Joint Global Ocean Flux Study Bermuda Atlantic Time-Series Study (BATS) site during the summer of 1996. Real-time nowcasting and forecasting of the flow field facilitated adaptive sampling of several eddy features in the area. Variations in upper ocean nutrient and pigment distributions were largely controlled by vertical isopycnal displacements associated with the mesoscale field. Shoaling density surfaces tended to introduce cold, nutrient-rich water into the euphotic zone, while deepening isopycnals displaced nutrient-depleted water downward. Chlorophyll concentration was generally enhanced in the former case and reduced in the latter. Eddy-induced upwelling at the base of the euphotic zone was affected by features of two different types captured in this survey: (1) a typical mid-ocean cyclone in which doming of the main thermocline raised the near-surface stratification upward; and (2) a mode water eddy composed of a thick lens of 18 C water, which pushed up the seasonal thermocline and depressed the main thermocline. Model hindcasts using all available data provide a four-dimensional context in which to interpret temporal trends at the BATS site and two other locations during the two weeks subsequent to the survey. Observed changes in near-surface structure at the BATS site included shoaling iscpycnals, increased nutrient availability at the base of the euphotic zone, and enhanced chlorophyll concentration within the euphotic zone. These trends are explicable in terms of a newly formed cyclone that impinged upon the site during this time period. These observations reveal that eddy upwelling has a demonstrable impact on the way in which the nitrate-density relationship changes with depth from the aphotic zone into the euphotic zone. A similar transition is present in the BATS record, suggesting that eddy-driven upwelling events are present in the time series of upper ocean biogeochemical properties. The variability in main thermocline temperature and nitrate in this synoptic spatial survey spans the range observed in these quantities in the 10-year time series available at BATS to date (1988-1998).

McGillicuddy Dennis J., Jr.↗

Mesoscale Variations of Biogeochemical Properties in the Sargasso Sea

A mesoscale resolution biogeochemical survey was carried out in the vicinity of the U.S. Joint Global Ocean Flux Study Bermuda Atlantic Time-series Study (BATS) site during the summer of 1996. Real-time nowcasting and forecasting of the flow field facilitated adaptive sampling of several eddy features in the area. Variations in upper ocean nutrient and pigment distributions were largely controlled by vertical isopycnal displacements associated with the mesoscale field. Shoaling density surfaces tended to introduce cold, nutrient-rich water into the euphotic zone, while deepening isopycnals displaced nutrient-depleted water downward. Chlorophyll concentration was generally enhanced in the former case and reduced in the latter. Eddy-induced upwelling at the base of the euphotic zone was affected by features of two different types captured in this survey-, (1) a typical mid-ocean cyclone in which doming of the main thermocline raised the near-surface stratification upward and (2) a mode water eddy composed of a thick lens of 18C water, which pushed up the seasonal thermocline and depressed the main thermocline. Model hindcasts using all available data provide a four-dimensional context in which to interpret temporal trends at the BATS site and two other locations during the 2 weeks subsequent to the survey. Observed changes in near-surface structure at the BATS site included shoaling isopycnals, increased nutrient availability at the base of the euphotic zone, and enhanced chlorophyll concentration within the cuphotic zone. These trends are explicable in terms of a newly formed cyclone that impinged upon the site during this time period. These observations reveal that eddy upwelling has a demonstrable impact on the way in which the nitrate-density relationship changes with depth from the aphotic zone into the euphotic zone. A similar transition is present in the BATS record, suggesting that eddy-driven upwelling events are present in the time series of upper ocean biogeochemical properties. The variability in main thermocline temperature and nitrate in this synoptic spatial survey spans the range observed in these quantities in the 10-year time series available at BATS to date (1988-1998).

McGillicuddy, D. J.↗

T/BEST: Technology Benefit Estimator for Composites and Applications to Engine Structures

Progress in the field of aerospace propulsion has heightened the need to combine advanced technologies. These benefits will provide guidelines for identifying and prioritizing high-payoff research areas, will help manage research with limited resources, and will show the link between advanced and basic concepts. An effort was undertaken at the NASA Lewis Research Center to develop a formal computational method, T/BEST (Technology Benefit Estimator), to assess advanced aerospace technologies, such as fibrous composites, and credibly communicate the benefits of research. Fibrous composites are ideal for structural applications such as high-performance aircraft engine blades where high strength-to-weight and stiffness-to-weight ratios are required. These factors - along with the flexibility to select the composite system and layup, and to favorably orient fiber directions - reduce the displacements and stresses caused by large rotational speeds in aircraft engines.

Chamis, Christos↗

Dose-Dependent Sensorimotor Impairment in Human Ocular Tracking After Acute Low-Dose Alcohol Administration

Changes in oculomotor behaviours are often used as metrics of sensorimotor disruption due to ethanol (EtOH); however, previous studies have focused on deficits at blood-alcohol concentrations (BACs) above about 0.04%.We investigated the dose dependence of the impairment in oculomotor and ocular behaviours caused by EtOH administration across a range of ultra-low BACs (≤0.035%).We took repeated measures of oculomotor and ocular performance from sixteen participants, both pre- and post-EtOH administration. To assess the neurological impacts across a wide range of brain areas and pathways, our protocol measured 21 largely independent performance metrics extracted from a range of behavioural responses ranging from ocular tracking of radial step-ramp stimuli, to eccentric gaze holding, to pupillary responses evoked by light flashes. Our results show significant impairment of pursuit and visual motion processing at 0.015% BAC, reflecting degraded neural processing within extrastriate cortical pathways. However, catch-up saccades largely compensate for the tracking displacement shortfall caused by low pursuit gain, although there still is significant residual retinal slip and thus degraded dynamic acuity. Furthermore, although saccades are more frequent, their dynamics are more sluggish (i.e. show lower peak velocities) starting at BAC levels as low as 0.035%. Small effects in eccentric gaze holding and no effect in pupillary response dynamics were observed at levels below 0.07%, showing the higher sensitivity of the pursuit response to very low levels of blood alcohol, under the conditions of our study.

visual motion processing↗

Investigation of several aspects of LANDSAT 4/5 data quality

A technique under development uses a zoom transfer scope to register the photograph of the target with digitally enlarged photographic hardcopy of the TM data using a visual fit to the area surrounding the target. The first attempt using the Sacramento Scene (44/33) of February 1, 1983 indicated that relief displacement in the aerial photography would cause large errors. A second attempt is in progress using the aero-triangulated scene centers which have no relief displacement. Being calculated points, the scene centers have somewhat larger absolute errors in geolocation, approximately 3 meters instead of 1.5 meters. The average TM effective instantaneous field of view (EIFOV) calculated from modulation transfer functions (MTFs) is 52.7 m. This is smaller than the 55 and 65 m EIFOVs reported earlier using noisy MTFs but larger than the EIFOVs from the San Mateo Bridge analysis which ranged from 44.5 to 50.9 m and averaged 47.6 m for the same TM scene.

Wrigley, R. C.↗

Pressure broadening of rotational bands. I - A statistical theory

Absorption of electromagnetic waves by rotational transitions of molecules is formulated for the case in which the wave frequency is displaced from resonance by an amount large compared to the reciprocal duration of a typical binary collision, and also large compared to the differences between frequencies of the strong resonances of the gas. In this far-wing limit, Fano's relaxation operator is reduced to a scalar parameter which depends on the frequency displacement. This relaxation parameter is not symmetric with respect to reflection about resonance, but becomes symmetric when multiplied by the factor exp (h/2pi) (omega sub d)/2kT where omega sub d is the frequency displacement. The theory applies to dipolar molecules of any shape, in collisions with either dipolar or quadrupolar molecules.

Rosenkranz, P. W.↗

Distributed parameter estimation for NASA Mini-Mast truss through displacement measurements

Most methods of system identification of large flexible structures by far are based on the lumped parameter approach. Because of the considerable computational burden due to the large number of unknown parameters, distributed parameter approach, which greatly decreases the number of unknowns, has being investigated. In this paper a distributed parameter model for the estimation of modal characteristics of NASA Mini-Mast truss has been formulated. Both Bernoulli-Euler beam and Timoshenko beam equations are used to characterize the lateral bending vibrations of the truss. The measurement of the lateral displacement at the tip of the truss is provided to the maximum likelihood estimator. Closed-form solutions of the partial differential equations and closed-form expressions of the sensitivity functions are derived so that the estimation algorithm is highly efficient. The resulting estimates from test data by using Timoshenko beam model are found to be comparable to those derived from finite element analysis.

Huang, Jen-Kuang↗

An in-flight investigation of a twin fuselage configuration in approach and landing

An in-flight investigation of the flying qualities of a twin fuselage aircraft design in the approach and landing flight phase was carried out in the USAF/AFWAL Total In-Flight Simulator (TIFS). The objective was to determine the effects of actual motion and visual cues on the pilot when he was offset from the centerline of the aircraft. The experiment variables were lateral pilot offset position (0, 30 and 50 feet) and effective roll mode time constant (.6, 1.2, 2.4 seconds). The evaluation included the final approach, flare and touchdown. Lateral runway offsets and 15 knot crosswinds were used to increase the pilot's workload and force him to make large lateral corrections in the final portion of the approach. Results indicated that large normal accelerations rather than just vertical displacements in rolling maneuvers had the most significant degrading effect on pilot ratings. The normal accelerations are a result of large lateral offset and fast roll mode time constant and caused the pilot to make unnecessary pitch inputs and get into a coupled pitch/roll oscillation while he was making line up and crosswind corrections. A potential criteria for lateral pilot offset position effects is proposed. When the ratio of incremented normal aceleration at the pilot station to the steady state roll rate for a step input reaches .01 to .02 g/deg/sec a deterioration of pilot rating and flying qualities level can be expected.

Weingarten, N. C.↗

Creep crack-growth: A new path-independent T sub o and computational studies

Two path independent integral parameters which show some degree of promise as fracture criteria are the C* and delta T sub c integrals. The mathematical aspects of these parameters are reviewed. This is accomplished by deriving generalized vector forms of the parameters using conservation laws which are valid for arbitrary, three dimensional, cracked bodies with crack surface tractions (or applied displacements), body forces, inertial effects and large deformations. Two principal conclusions are that delta T sub c is a valid crack tip parameter during nonsteady as well as steady state creep and that delta T sub c has an energy rate interpretation whereas C* does not. An efficient, small displacement, infinitestimal strain, displacement based finite element model is developed for general elastic/plastic material behavior. For the numerical studies, this model is specialized to two dimensional plane stress and plane strain and to power law creep constitutive relations.

Stonesifer, R. B.↗

Hydrazine Energy Storage: Displacing N 2 H 4 from the Metal Coordination Sphere

Hydrogen carriers, such as hydrazine (N 2 H 4 ), may facilitate long duration energy storage, a vital component for resilient grids by enabling more renewable energy generation. Lanthanide coordination chemistry with N 2 H 4 as well as efforts to displace N 2 H 4 from the metal coordination sphere to develop an efficient catalytic production cycle were detailed. Modeling the equilibrium of different ligand coordination, it was predicted that strong sigma donor molecules would be required to displace N 2 H 4 . Monitoring competition experiments with nuclear magnetic resonance confirmed that trimethyl phosphine oxide, dimethylformamide, and dimethyl sulfoxide displaced N 2 H 4 in large or small lanthanide complexes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

System concepts and technologies for high orbit SAR

This paper discusses large aperture, high orbit radar concepts for measuring sub-centimeter-level surface displacements from space. We will explain the need for large aperture, high orbit arrays and will discuss the technologies required to achieve these missions.

membrane arrays↗

Creep crack-growth: A new path-independent integral (T sub c), and computational studies

The development of valid creep fracture criteria is considered. Two path-independent integral parameters which show some degree of promise are the C* and (Delta T)sub c integrals. The mathematical aspects of these parameters are reviewed by deriving generalized vector forms of the parameters using conservation laws which are valid for arbitrary, three dimensional, cracked bodies with crack surface tractions (or applied displacements), body forces, inertial effects, and large deformations. Two principal conclusions are that (Delta T)sub c has an energy rate interpretation whereas C* does not. The development and application of fracture criteria often involves the solution of boundary/initial value problems associated with deformation and stresses. The finite element method is used for this purpose. An efficient, small displacement, infinitesimal strain, displacement based finite element model is specialized to two dimensional plane stress and plane strain and to power law creep constitutive relations. A mesh shifting/remeshing procedure is used for simulating crack growth. The model is implemented with the quartz-point node technique and also with specially developed, conforming, crack-tip singularity elements which provide for the r to the n-(1+n) power strain singularity associated with the HRR crack-tip field. Comparisons are made with a variety of analytical solutions and alternate numerical solutions for a number of problems.

Stonesifer, R. B.↗

Multiple Pathways of Commodity Crop Expansion in Tropical Forest Landscapes

Commodity crop expansion, for both global and domestic urban markets, follows multiple land change pathways entailing direct and indirect deforestation, and results in various social and environmental impacts. Here we compare six published case studies of rapid commodity crop expansion within forested tropical regions. Across cases, between 1.7 percent and 89.5 percent of new commodity cropland was sourced from forestlands. Four main factors controlled pathways of commodity crop expansion: (i) the availability of suitable forestland, which is determined by forest area, agroecological or accessibility constraints, and land use policies, (ii) economic and technical characteristics of agricultural systems, (iii) differences in constraints and strategies between small-scale and large-scale actors, and (iv) variable costs and benefits of forest clearing. When remaining forests were unsuitable for agriculture and/or policies restricted forest encroachment, a larger share of commodity crop expansion occurred by conversion of existing agricultural lands, and land use displacement was smaller. Expansion strategies of large-scale actors emerge from context-specific balances between the search for suitable lands; transaction costs or conflicts associated with expanding into forests or other state-owned lands versus smallholder lands; net benefits of forest clearing; and greater access to infrastructure in already cleared lands. We propose five hypotheses to be tested in further studies: (i) land availability mediates expansion pathways and the likelihood that land use is displaced to distant, rather than to local places; (ii) use of already-cleared lands is favored when commodity crops require access to infrastructure; (iii) in proportion to total agricultural expansion, large-scale actors generate more clearing of mature forests than smallholders; (iv) property rights and land tenure security influence the actors participating in commodity crop expansion, the form of land use displacement, and livelihood outcomes; (v) intensive commodity crops may fail to spare land when inducing displacement. We conclude that understanding pathways of commodity crop expansion is essential to improve land use governance.

Forest↗

Effect of Eccentricity on the Static and Dynamic Performance of a Turbulent Hybrid Bearing

The effect of journal eccentricity on the static and dynamic performance of a water lubricated, 5-recess hybrid bearing is presented in detail. The hydrostatic bearing has been designed to operate at a high speed and with a large level of external pressurization. The operating conditions determine the flow in the bearing to be highly turbulent and strongly dominated by fluid inertia effects. The analysis covers the spectrum of journal center displacements directed towards the middle of a recess and towards the mid-land portion between two consecutive recesses. Predicted dynamic force coefficients are uniform for small to moderate eccentricities. For large journal center displacements, fluid cavitation and recess position determine large changes in the bearing dynamic performance. The effect of fluid inertia force coefficients on the threshold speed of instability and whirl ratio of a single mass flexible rotor is discussed.

Sanandres, Luis A.↗

Charon User Manual (V.2.1) (Rev.01)

This manual gives usage information for the Charon semiconductor device simulator. Charon was developed to meet the modeling needs of Sandia National Laboratories and to improve on the capabilities of the commercial TCAD simulators; in particular, the additional capabilities are running very large simulations on parallel computers and modeling displacement damage and other radiation effects in significant detail. The parallel capabilities are based around the MPI interface which allows the code to be ported to a large number of parallel systems, including linux clusters and proprietary "big iron" systems found at the national laboratories and in large industrial settings.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Charon User Manual: v. 2.2 (revision1)

This manual gives usage information for the Charon semiconductor device simulator. Charon was developed to meet the modeling needs of Sandia National Laboratories and to improve on the capabilities of the commercial TCAD simulators; in particular, the additional capabilities are running very large simulations on parallel computers and modeling displacement damage and other radiation effects in significant detail. The parallel capabilities are based around the MPI interface which allows the code to be ported to a large number of parallel systems, including linux clusters and proprietary “big iron” systems found at the national laboratories and in large industrial settings.

42 ENGINEERING↗

Search for displaced leptons in $\sqrt{𝑠}$ =13 TeV and 13.6 TeV 𝑝⁢𝑝 collisions with the ATLAS detector

A search for leptons displaced from the primary vertex is performed with the ATLAS detector at the Large Hadron Collider. The search includes the full proton-proton collision dataset collected during Run 2 at $\sqrt{𝑠}$ = 13 TeV and a partial dataset collected during Run 3 in 2022–2023 at $\sqrt{𝑠}$ = 13.6 TeV, corresponding to integrated luminosities of 140 fb −1 and 56.3 fb −1 , respectively. Final states with displaced electrons or muons are considered, and novel triggers introduced in Run 3 are employed that use large impact parameter tracking to reconstruct displaced tracks with low momentum. In addition, photon reconstruction and multivariate techniques are employed to broaden the sensitivity to channels with large background rates or highly displaced electrons, respectively. The results are consistent with the Standard Model background expectations and are used to set model-independent limits on the production of displaced electrons and muons. The analysis is also interpreted in the context of a gauge-mediated supersymmetry breaking model with pair-produced long-lived sleptons and a dark sector model with pair-produced chargino-like states. The results include 95% confidence level exclusions of selectrons with lifetimes from 4 ps to 60 ns and a mass of 150 GeV, and exclusions of selectrons, smuons, and staus with a lifetime of 0.3 ns for masses up to 740, 830, and 440 GeV, respectively. Dark charginos with masses up to 380 GeV are excluded for a mass difference with the neutral state of 40 GeV, and mass differences down to 17 GeV are excluded for dark charginos with a 100 GeV mass.

supersymmetric models↗