Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “label shift”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

252 records · Page 14

Distinct responses of Asian summer monsoon to black carbon aerosols and greenhouse gases

Black carbon (BC) aerosols emitted from natural and anthropogenic sources induce positive radiative forcing and global warming, which in turn significantly affect the Asian summer monsoon (ASM). However, many aspects of the BC effect on the ASM remain elusive and largely inconsistent among previous studies, which is strongly dependent on different low-level thermal feedbacks over the Asian continent and the surrounding ocean. This study examines the response of the ASM to BC forcing in comparison with the effect of doubled greenhouse gases (GHGs) by analyzing the Precipitation Driver Response Model Intercomparison Project (PDRMIP) simulations under an extremely high BC level (10 times modern global BC emissions or concentrations, labeled BC×10) from nine global climate models (GCMs). The results show that although BC and GHGs both enhance the ASM precipitation minus evaporation (P–E; a 13.6 % increase for BC forcing and 12.1 % for GHGs from the nine-model ensemble, respectively), there exists a much larger uncertainty in changes in ASM P–E induced by BC than by GHGs. The summer P–E is increased by 7.7 % to 15.3 % due to these two forcings over three subregions, including East Asian, South Asian and western North Pacific monsoon regions. Further analysis of moisture budget reveals distinct mechanisms controlling the increases in ASM P–E induced by BC and GHGs. The change in ASM P–E by BC is dominated by the dynamic effect due to the enhanced large-scale monsoon circulation, whereas the GHG-induced change is dominated by the thermodynamic effect through increasing atmospheric water vapor. Radiative forcing of BC significantly increases the upper-level atmospheric temperature over the Asian region to enhance the upper-level meridional land–sea thermal gradient (MLOTG), resulting in a northward shift of the upper-level subtropical westerly jet and an enhancement of the low-level monsoon circulation, whereas radiative forcing of GHGs significantly increases the tropical upper-level temperature, which reduces the upper-level MLOTG and suppresses the low-level monsoonal circulation. Hence, our results indicate a different mechanism of BC climate effects under the extremely high BC level: that BC forcing significantly enhances the upper-level atmospheric temperature over the Asian region, determining ASM changes, instead of low-level thermal feedbacks as indicated by previous studies.

54 ENVIRONMENTAL SCIENCES↗

Artificial Neural Networks to Predict Cognitive Impairment of Rodents Subjected to Space Radiation

INTRODUCTION We use artificial neural networks (ANNs) as an example machine learning (ML) tool to predict the cognitive performance impairment of rats induced by irradiation. The experimental data in the analyses is attentional set-shifting (ATSET) test scores from a rodent model exposed to ≤15 cGy of individual galactic cosmic radiation (GCR) ions: 4He, 28Si, or 56Fe, expected for a Lunar or Mars mission [1]. This work investigates rats at a subject-based level and uses applied dose and performance scores taken before irradiation to predict whether a rat will be impaired when irradiated. The results of this study are significant to crewed space missions as they support the potential of predicting an astronaut’s impairment in a specific task before spaceflight through the implementation of appropriately trained ML tools. METHODS Data used in this work are scores from the ATSET, a multi-stage constrained cognitive flexibility test [2]. Our computational model utilizes the number of attempts to reach the criterion to pass a stage as a behavioral performance measure for rats. We use the post-irradiation scores, generate thresholds from cumulative distribution plots of non-irradiated rats, and calculate the percent of irradiated rats whose scores fall below the threshold to infer how each radiation type/dose affects a population. Rats scoring above the threshold are labeled impaired while the others are non-impaired. We then employ ANNs as a typical ML technique, and use each subject’s individual scores taken before radiation along with the applied dose, to predict their personal susceptibility to cognitive impairment due to space radiation exposure. RESULTS AND CONCLUSION A significant finding is the exhibition of a dose-dependent increasing probability of impairment for 1 to 10 cGy of 28Si or 56Fe in the simple discrimination (SD) stage of the ATSET, and for 1 to 10 cGy of 56Fe in the compound discrimination (CD) stage. On a subject-based level, implementing ML classifiers such as ANNs identifies rats that have a higher tendency for impairment after GCR exposure [1]. The receiver operating characteristic (ROC) and the precision-recall (PR) curves of the ML models show a better prediction of impairment when 56Fe is the ion in question in both SD (Figure 1) and CD stages. They, however, do not depict impairment due to 4He in SD (Figure 1) and 28Si in CD, suggesting no dose-dependent impairment response in these cases. In this work, “good” prediction pertains to “better-than-random-chance”, due to the limited sample size and the high inter- and intra-individual variabilities in response to brain stimulation paradigms, as applicable to both animals and humans. More behavioral tests and biomarkers should be investigated on the same subjects, to be fed to the ML models to capture the agents responsible for performance alterations of some individuals versus others.

machine learning↗

Machine Learning Models to Predict Cognitive Impairment of Rodents Subjected to Space Radiation

INTRODUCTION We use artificial neural networks (ANNs) as an example machine learning (ML) tool to predict the cognitive performance impairment of rats induced by irradiation. The experimental data in the analyses is attentional set-shifting (ATSET) test scores from a rodent model exposed to ≤15 cGy of individual galactic cosmic radiation (GCR) ions: 4He, 28Si, or 56Fe, expected for a Lunar or Mars mission [1]. This work investigates rats at a subject-based level and uses applied dose and performance scores taken before irradiation to predict whether a rat will be impaired when irradiated. The results of this study are significant to crewed space missions as they support the potential of predicting an astronaut’s impairment in a specific task before spaceflight through the implementation of appropriately trained ML tools. METHODS Data used in this work are scores from the ATSET, a multi-stage constrained cognitive flexibility test [2]. Our computational model utilizes the number of attempts to reach the criterion to pass a stage as a behavioral performance measure for rats. We use the post-irradiation scores, generate thresholds from cumulative distribution plots of non-irradiated rats, and calculate the percent of irradiated rats whose scores fall below the threshold to infer how each radiation type/dose affects a population. Rats scoring above the threshold are labeled impaired while the others are non-impaired. We then employ ANNs as a typical ML technique, and use each subject’s individual scores taken before radiation along with the applied dose, to predict their personal susceptibility to cognitive impairment due to space radiation exposure. RESULTS AND CONCLUSION A significant finding is the exhibition of a dose-dependent increasing probability of impairment for 1 to 10 cGy of 28Si or 56Fe in the simple discrimination (SD) stage of the ATSET, and for 1 to 10 cGy of 56Fe in the compound discrimination (CD) stage. On a subject-based level, implementing ML classifiers such as ANNs identifies rats that have a higher tendency for impairment after GCR exposure [1]. The receiver operating characteristic (ROC) and the precision-recall (PR) curves of the ML models show a better prediction of impairment when 56Fe is the ion in question in both SD (Figure 1) and CD stages. They, however, do not depict impairment due to 4He in SD (Figure 1) and 28Si in CD, suggesting no dose-dependent impairment response in these cases. In this work, “good” prediction pertains to “better-than-random-chance”, due to the limited sample size and the high inter- and intra-individual variabilities in response to brain stimulation paradigms, as applicable to both animals and humans. More behavioral tests and biomarkers should be investigated on the same subjects, to be fed to the ML models to capture the agents responsible for performance alterations of some individuals versus others.

machine learning↗

Distinct responses of Asian summer monsoon to black carbon aerosols and greenhouse gases

Black carbon (BC) aerosols emitted from natural and anthropogenic sources induce positive radiative forcing and global warming, which in turn significantly affect the Asian summer monsoon (ASM). However, many aspects of the BC effect on ASM remain elusive and largely inconsistent among previous studies, which is strongly dependent on different low-level thermal feedbacks over the Asian continent and the surrounding ocean. This study examines the response of ASM to BC forcing in comparison with the effect of doubled greenhouse gases (GHGs) by analyzing the Precipitation Driver Response Model Intercomparison Project (PDRMIP) simulations under an extreme high BC level (10 times modern global BC emissions or concentrations, labeled by BC $\times$ 10) from nine global climate models (GCMs). The results show that although BC and GHGs both enhance the ASM precipitation minus evaporation (P–E) (a 13.6 % increase for BC forcing and 12.1 % for GHGs from the nine-model ensemble, respectively), there exists a much larger uncertainty in changes in ASM P–E induced by BC than by GHGs. The summer P–E is increased by 7.7 % to 15.3 % due to these two forcings over three sub-regions including East Asian, South Asian, and western North Pacific monsoon regions. Further analysis of moisture budget reveals distinct mechanisms controlling the increases in ASM P–E induced by BC and GHGs. The change in ASM P–E by BC is dominated by the dynamic effect due to the enhanced large-scale monsoon circulation, whereas the GHG-induced change is dominated by the thermodynamic effect through increasing atmospheric water vapor. Radiative forcing of BC significantly increases the upper-level atmospheric temperature over the Asian region to enhance the upper-level meridional land-sea thermal gradient (MLOTG), resulting in a northward shift of the upper-level subtropical westerly jet and an enhancement of the low-level monsoon circulation; whereas radiative forcing of GHGs significantly increases the tropical upper-level temperature, which reduces the upper-level MLOTG and suppresses the low-level monsoonal circulation. Hence, our results indicate a different mechanism of BC climate effects under the extreme high BC level, that BC forcing significantly enhances the upper-level atmospheric temperature over the Asian region, determining ASM changes, instead of low-level thermal feedbacks as indicated by previous studies.

54 ENVIRONMENTAL SCIENCES↗

High-resolution phonon energy shift measurements with the inelastic neutron spin echo technique

The energy resolution of the conventional way of measuring a small change in a phonon dispersion curve using neutron scattering is restricted by the relatively coarse intrinsic resolution ellipsoid of the neutron triple-axis spectrometer (TAS). By implementing inelastic neutron spin echo on the host TAS using the Larmor precession of the neutron spin, the energy resolution of such measurements can be further improved without reducing the resolution ellipsoid. Measurements of the temperature-dependent phonon energy change are demonstrated using superconducting magnetic Wollaston prisms at the HB-1 instrument of the High-Flux Isotope Reactor at Oak Ridge National Laboratory, and the achievable resolution is <10 µeV.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

The Art of War: Beyond Memory-one Strategies in Population Games

We show that the history of play in a population game contains exploitable information that can be successfully used by sophisticated strategies to defeat memory-one opponents, including zero determinant strategies. The history allows a player to label opponents by their strategies, enabling a player to determine the population distribution and to act differentially based on the opponent’s strategy in each pairwise interaction. For the Prisoner’s Dilemma, these advantages lead to the natural formation of cooperative coalitions among similarly behaving players and eventually to unilateral defection against opposing player types. We show analytically and empirically that optimal play in population games depends strongly on the population distribution. For example, the optimal strategy for a minority player type against a resident TFT population is ALLC, while for a majority player type the optimal strategy versus TFT players is ALLD. Such behaviors are not accessible to memory-one strategies. Drawing inspiration from Sun Tzu’s the Art of War, we implemented a non-memory-one strategy for population games based on techniques from machine learning and statistical inference that can exploit the history of play in this manner. Via simulation we find that this strategy is essentially uninvadable and can successfully invade (significantly more likely than a neutral mutant) essentially all known memory-one strategies for the Prisoner’s Dilemma, including ALLC (always cooperate), ALLD (always defect), tit-for-tat (TFT), winstay-lose-shift (WSLS), and zero determinant (ZD) strategies, including extortionate and generous strategies.

60 APPLIED LIFE SCIENCES↗

Exploring Local Vibrational Structure in Protein-Bound Chlorophyll a: Isotope-Enrichment Experiments and Electrostatic Analysis

Local chlorophyll (Chl) vibrations play an essential role in biological photosynthesis by facilitating rapid energy transfer between pigments. In research studies, they also provide a useful spectroscopic probe of the local protein environment that surrounds each pigment. However, measuring the complete vibrational absorption spectrum of a protein-bound Chl molecule is much more difficult than, for example, Chl in neat solvent due to overlap with protein vibrations that typically drown out Chl vibrational features. Resonance Raman and fluorescence spectroscopies provide a way around this problem for Franck–Condon active vibrations, but these often rely on cryogenic measurement conditions and fail to capture vibrational signatures from, e.g., ester-group vibrations that lack coupling to a convenient electronic transition. In the present contribution, we use 13 C-enrichment of the protein backbone to shift protein background signals to lower frequency, providing a largely clean spectral window in which to study local Chl a C═O stretch modes. A room-temperature absorption spectrum for Chl a in the water-soluble chlorophyll protein (WSCP) of Lepidium virginicum is thus extracted as a difference between protein-plus-pigment and protein-only vibrational spectra. Excellent agreement in the molecular fingerprint region with the vibrational spectrum of Chl a in organic solvents confirms that the resulting spectrum represents the response of the protein-bound Chl a molecule. Furthermore, the ester group resonance is observed to shift in response to the S53P mutation that eliminates a 17 3 ester group hydrogen bond from the protein environment. Finally, we analyze these experimental results using MD-based electrostatic analysis, finding that electric-field mapping at the C atom of the ester group provides a satisfactory explanation for the observed frequency shifts between organic solvent and protein environment. MD analysis further suggests that a red-shifted ester peak observed experimentally for the S53P mutant results from solvation of the 17 3 Chl ester group due increase water penetration into the Chl-binding pocket relative to wild-type WSCP. Here, we anticipate that these results will prove useful both for benchmarking future simulation work and as a reference for interpreting Chl vibrational spectra as a probe of pigment–protein interactions.

14 SOLAR ENERGY↗

The tonotopic map in the embryonic chicken cochlea

The purpose of the present study was to determine the tonotopic map in the chicken cochlea at 19 days of incubation (E19) by obtaining characteristic frequencies (CFs) for primary afferents, labeling the characterized neurons, and documenting their projections to the papilla. The lowest and highest CFs recorded were 188 and 1623 Hz respectively. The embryonic tonotopic map coincided with maps reported for post-hatch chicks. There were no evidence that neurons selective to low frequencies project inappropriately to more basal locations of the embryonic papilla. Linear regression was used to estimate the frequency gradient (b = 0.037 +/- 0.012 In Hz/% [b +/- SEb]) and intercept (In C, where C = 111 Hz) of the semilog plot of frequency versus cochlear position (in % distance from apex). From these estimates the octave distribution was calculated to be 18.7%/octave or 0.58 mm/octave. These quantities were not significantly different from those found in post hatch chickens. We conclude that the tonotopic map of the avian cochlea for CFs between 100 and 1700 Hz is stable and relatively mature from age E19 to post-hatch day 21 (P21). The most striking sign of immaturity in the E19 embryo is the limited range of high CFs. We offer the hypothesis that, between the ages of E19 and P21, improvements in middle ear admittance alone or in combination with functional maturation of the cochlear base may be the principal factors responsible for the appearance of adult-like high CF limits and not an apically shifting tonotopic map.

NASA Discipline Neuroscience↗

Acridine orange staining reaction as an index of physiological activity in Escherichia coli

The assumption that the acridine orange (AO) color reaction may be used as an index of physiological activity was investigated in laboratory grown Escherichia coli. Spectrofluorometric observations of purified nucleic acids, ribosomes and the microscopic color of bacteriophage-infected cells stained with AO confirmed the theory that single-stranded nucleic acids emit orange to red fluorescence while those that are double-stranded fluoresce green in vivo. Bacteria growing actively in a rich medium could be distinguished from cells in stationary phase by the AO reaction. Cells from log phase appeared red, whereas those in stationary phase were green. However, this differentiation was not seen when the bacteria were grown in a minimal medium or when a variation of the staining method was used. Also, shifting bacteria in stationary phase to starvation conditions rapidly changed their AO staining reaction. Boiling and exposure to lethal concentrations of azide and formalin resulted in stationary-phase cells that appeared red after staining but bacteria killed with chlorine remained green. These findings indicate that the AO staining reaction may be suggestive of physiological activity under defined conditions. However, variables in staining and fixation procedures as well as uncertainties associated with mixed bacterial populations in environmental samples may produce results that are not consistent with the classical interpretation of this reaction. The importance of validating the putative physiological implications of this staining reaction is stressed.

NASA Discipline Number 04-10↗

Sirtuin 7 promotes cellular survival following genomic stress by attenuation of DNA damage, SAPK activation and p53 response

Maintaining the genomic integrity is a constant challenge in proliferating cells. Amongst various proteins involved in this process, Sirtuins play a key role in DNA damage repair mechanisms in yeast as well as mammals. In the present work we report the role of one of the least explored Sirtuin viz., SIRT7, under conditions of genomic stress when treated with doxorubicin. Knockdown of SIRT7 sensitized osteosarcoma (U2OS) cells to DNA damage induced cell death by doxorubicin. SIRT7 overexpression in NIH3T3 delayed cell cycle progression by causing delay in G1 to S transition. SIRT7 overexpressing cells when treated with low dose of doxorubicin (0.25 µM) showed delayed onset of senescence, lesser accumulation of DNA damage marker γH2AX and lowered levels of growth arrest markers viz., p53 and p21 when compared to doxorubicin treated control GFP expressing cells. Resistance to DNA damage following SIRT7 overexpression was also evident by EdU incorporation studies where cellular growth arrest was significantly delayed. When treated with higher dose of doxorubicin (>1 µM), SIRT7 conferred resistance to apoptosis by attenuating stress activated kinases (SAPK viz., p38 and JNK) and p53 response thereby shifting the cellular fate towards senescence. Interestingly, relocalization of SIRT7 from nucleolus to nucleoplasm together with its co-localization with SAPK was an important feature associated with DNA damage. SIRT7 mediated resistance to doxorubicin induced apoptosis and senescence was lost when p53 level was restored by nutlin treatment. Overall, we propose SIRT7 attenuates DNA damage, SAPK activation and p53 response thereby promoting cellular survival under conditions of genomic stress. - Highlights: • Knockdown of SIRT7 sensitized cells to DNA damage induced apoptosis. • SIRT7 delayed onset of premature senescence by attenuating DNA damage response. • Overexpression of SIRT7 delayed cell cycle progression by delaying G1/S transition. • Upon DNA damage SIRT7 attenuated p38/JNK activation and also p53 response. • Overall, SIRT7 promoted cellular survival in conditions of genomic stress.

60 APPLIED LIFE SCIENCES↗

LIBS Spectral Data for a Mixed Actinide Fuel Pellet Containing Uranium, Plutonium, Neptunium and Americium (V.1)

Laser-induced breakdown spectroscopy (LIBS) was used to analyze a mixed actinide fuel pellet containing 75% UO 2 /20% PuO 2 /3% AmO 2 /2% NpO 2 . The preliminary data shown here is the first report of LIBS analysis of a mixed actinide fuel pellet, to the authors knowledge. The LIBS spectral data was acquired in a plutonium facility at Los Alamos National Laboratory where the sample was contained within a glove box. The initial installation of the glove box was not intended for complete ultraviolet (UV), visible (VIS) and near infrared (NIR) transmission, therefore the LIBS spectrum is truncated in the UV and NIR regions due to the optical transmission of the window port and filters that were installed. The optical collection of the emission from the LIBS plasma will be optimized in the future. However, the preliminary LIBS data acquired is worth reporting due to the uniqueness of the sample and spectral data. The analysis of several actinides in the presence of each other is an important feature of this analysis since traditional methods must chemically separate uranium, plutonium, neptunium, and americium prior to analysis. Due to the historic nature of the sample fuel pellet analyzed, the provided sample composition of 75% UO 2 /20% PuO 2 /3% AmO 2 /2% NpO 2 cannot be confirm without further analytical processing. Uranium, plutonium, and americium emission lines were abundant and easily assigned while neptunium was more difficult to identify. There may be several reasons for this observation, other than knowing the exact sample composition of the fuel pellet. First, the atomic emission wavelength resources for neptunium are limited and such techniques as hollow cathode discharge lamp have different dynamics than the plasma used in LIBS which results in different emission spectra. Secondly, due to the complex sample of four actinide elements, which all have very dense electronic energy levels, there may be reactions and interactions occurring within the plasma, such as collisional energy transfer, that might be a factor in the reduction in neptunium emission lines. Neptunium has to be analyzed alone using LIBS to further understand the dynamics that may be occurring in the plasma of the mixed actinide fuel pellet sample. The LIBS data suggests that the emission spectrum for the mixed actinide fuel pellet is not simply the sum of the emission spectra of the pure samples but is dependent on the species present in the plasma and the interactions and reactions that occur within the plasma. Finally, many of the neptunium lines are in the near infrared region which is drastically reduced in intensity by the current optical setup and possibly the sensitivity of the emission detector in the spectral region. Once the optics are replaced and the optical collection system is modified and optimized, the probability of observing emission lines for neptunium might be increased significantly. The mixed actinide fuel pellet was analyzed under the experimental conditions listed in Table 1. The LIBS spectra of the fuel pellet are shown in Figures 1-49. The spectra are labeled with the observed wavelength and atomic species (both neutral (I) and ionic (II)). Table 2 is a complete list of the observed and literature based emission wavelengths. The literature wavelengths have references including NIST Atomic Spectra Database (NIST), B.A. Palmer et al. 'An Atlas of Uranium Emission Intensities in a Hollow Cathode Discharge' taken at the Kitt Peak National Observatory (KPNO), R.L. Kurucz 1995 Atomic Line Data from the Smithsonian Astrophysical Observatory (SAO), J. Blaise et al. 'The Atomic Spectrum of Plutonium' from Argonne National Laboratory (BFG), and M. Fred and F.S. Tomkins, 'Preliminary Term Analysis of Am I and Am II Spectra' (FT). The dash (-) shown under Ionic State indicates that the ionic state of the transition was not available. In the spectra, the dash (-) is replaced with a question mark (?). Peaks that are not assigned are most likely real features and not noise but cannot be confidently assigned to a transition without further investigation. Several peaks have multiple assignments due to limited resolution of the spectrometer used (20,000, $\lambda$/$\Delta$$\lambda$) and without the availability, at this point in time, of pure PuO 2 , AmO 2 , and NpO 2 to confirm the identity of the peaks. A different spectrometer was used in the plutonium facility to collect the mixed actinide fuel pellet data (Echelle 3000) than the DUO 2 , ThO 2 and uranium ore previously reported (Echelle 4000) which accounts for the slight shift in the observed wavelength of the uranium emission lines.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Innovating the next generation of commercial smart building software

Nearly 30% of commercial building energy use is wasted due to equipment faults and HVAC controls problems. The result is increased emissions, compromised comfort and productivity, and less reliable coordination of building power needs with a clean grid. The energy impact alone represents $17 billion in potential savings. Today’s smart building software provides a robust solution to address these operational deficiencies. Energy management and information systems (EMIS) are saving up to 9% on average, with two-year paybacks. They are being incorporated into energy management processes, commissioning services, and utility programs. As effective as they are, two barriers prevent even deeper benefits; limited personnel to fix problems once they are identified, and the expense and time to manually implement changes in control systems. In partnership with the research community, the EMIS industry is developing new capabilities to overcome these barriers. Moving beyond siloed products for either fault detection and diagnostics, or optimal control, these new capabilities empower users to not only automatically identify faults, but also to push corrective action, and control improvements to their buildings. In this paper, several areas for enhancements are documented: ‘one-time’ correction of faults such as setpoints, schedules, and economizer lockouts; short-term active testing for automated proportional integral derivative (PID) loop tuning and functional testing; and continuous supervisory control for demand flexibility and year-round efficiency. Results are presented from a pair of partner implementations out of a dozen providers integrating these enhancements into their products, including field tests from across the country, and insights into operator acceptance and integration into operations and maintenance practices.

Casillas, Armando↗

Characterization of a novel weak interaction between MUC1 and Src-SH3 using nuclear magnetic resonance spectroscopy

Highlights: Black-Right-Pointing-Pointer MUC1 binds the Src-SH3 domain potentially triggering Src dependent cell migration. Black-Right-Pointing-Pointer NMR Spectroscopy was used to monitor MUC1-CD and Src SH3 domain titrations. Black-Right-Pointing-Pointer MUC1-CD peptides bind with a low affinity (K{sub d} of 2-3 mM) to a non-canonical site. Black-Right-Pointing-Pointer Weak interactions may mediate dynamic processes like migration. Black-Right-Pointing-Pointer The MUC1-CD and Src-SH3 interaction may be a prime target to inhibit cell migration. -- Abstract: Breast cancer causes death through cancer cell migration and subsequent metastasis to distant organs. In vitro, the MUC1 mucin can mediate breast cancer cell migration by binding to intercellular adhesion molecule-1 (ICAM-1). This migration is dependent on MUC1 cytoplasmic domain (MUC1-CD) activation of the non-receptor tyrosine kinase, Src, possibly through competitive displacement of an inhibitory Src intramolecular SH3 binding. Therefore, we characterized the binding site and affinity of the MUC1-CD for Src-SH3 using multidimensional nuclear magnetic resonance (NMR) spectroscopy to monitor the titration of the {sup 15}N labeled Src-SH3 domain with synthetic native and mutant peptides of MUC1-CD. The results revealed that the dissociation constant (K{sub d}) for the interaction of the native MUC1-CD peptides and Src-SH3 domain was weak with a K{sub d} of 2-3 mM. Notably, the SH3 residues most perturbed upon peptide binding were located outside the usual hydrophobic binding cleft in a previously described alternate binding site on the Src-SH3, suggesting that MUC1-CD binds to a non-canonical site. The binding characteristics outlined here suggest that the interaction between Src-SH3 and MUC1-CD represents a novel weak electrostatic interaction of the type which is increasingly recognized as important in transient and dynamic protein complexes required for cell migration and signal transduction. As such, this study forms the foundation for the design of specific inhibitors of this interaction which may target breast cancer metastases with exquisite specificity.

60 APPLIED LIFE SCIENCES↗

DeFault: DEep‐Learning‐Based FAULT Delineation Using the IBDP Passive Seismic Data at the Decatur CO2 Storage Site

Abstract The carbon capture, utilization, and storage (CCUS) framework is an essential component in reducing greenhouse gas emissions, with its success hinging on the comprehensive knowledge of subsurface geology and geomechanics. Passive seismic event relocation and fault detection offer vital insights into subsurface structures and the ability to monitor fluid migration pathways. Accurate identification and localization of seismic events, however, face significant challenges, including the necessity for high‐quality seismic data and advanced computational methods. To address these challenges, we introduce a novel deep learning method, , specifically designed for passive seismic source relocation and fault delineating for passive seismic monitoring projects. By leveraging data domain‐adaptation, allows us to train a neural network with labeled synthetic data and apply it directly to field data. Using , the passive seismic sources are automatically clustered based on their recording time and spatial locations, and subsequently, faults and fractures are delineated accordingly. We demonstrate the efficacy of on a field case study involving injection related microseismic data from Decatur, Illinois area. Our approach accurately and efficiently relocated passive seismic events, identified faults and could aid in potential damage induced by seismicity. Our results highlight the potential of as a valuable tool for passive seismic monitoring, emphasizing its role in ensuring CCUS project safety. This research bolsters the understanding of subsurface characterization in CCUS, illustrating machine learning’s capacity to refine these methods. Ultimately, our work has significant implications for CCUS technology deployment, an essential strategy in combating climate change. Plain Language Summary In our quest to tackle climate change, we use a strategy known as carbon capture, utilization, and storage (CCUS) to keep greenhouse gases out of the atmosphere. This strategy relies heavily on our ability to understand what's happening deep under the earth's surface. To make sure we store super critical safely, we need to accurately map out the geological structure, especially faults, but this is tough without high‐quality data and complex computer programs. We've developed a new tool called “DeFault,” which uses advanced machine learning to improve how we find and map these underground features. “DeFault” is smart enough to learn from numerically simulated data and then apply what it’s learned to real‐world situations. It groups together seismic activity—tiny tremors and shifts in the earth—based on when and where they happen, which helps us spot where there might be cracks or faults. We tested “DeFault” in Illinois, where CO 2 is injected underground, and it successfully pinpointed where these tremors occurred and mapped out the faults, helping to prevent accidents accurately in the future. Our study shows that “DeFault” will be a powerful ally in making CCUS safer and more effective, especially for the Illinois Basin Decatur Project. Key Points Faults and fractures introduced by carbon storage can be monitored by passive seismicity DeFault algorithm enables an automatic process for accurate and efficient passive seismic event locating and clustering

58 GEOSCIENCES↗

Cosmology with equivalence principle breaking in the dark sector

A long-range force acting only between nonbaryonic particles would be associated with a large violation of the weak equivalence principle. We explore cosmological consequences of this idea, which we label ReBEL (daRk Breaking Equivalence principLe). A high resolution hydrodynamical simulation of the distributions of baryons and dark matter confirms our previous findings that a ReBEL force of comparable strength to gravity on comoving scales of about 1 h{sup -1} Mpc causes voids between the concentrations of large galaxies to be more nearly empty, suppresses accretion of intergalactic matter onto galaxies at low redshift, and produces an early generation of dense dark-matter halos. A preliminary analysis indicates the ReBEL scenario is consistent with the one-dimensional power spectrum of the Lyman-Alpha forest and the three-dimensional galaxy autocorrelation function. Segregation of baryons and DM in galaxies and systems of galaxies is a strong prediction of ReBEL. ReBEL naturally correlates the baryon mass fraction in groups and clusters of galaxies with the system mass, in agreement with recent measurements.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Effect of sintering time on structural, microstructural and chemical composition of Ni-doped lanthanum gallate perovskites

This work reports the effect of two different sintering times, 6 and 48 h on the structural, microstructural, and chemical features of Ni-doped La{sub 0.90}Sr{sub 0.10}GaO{sub 3.00−δ}. Independently of the sintering time, La{sub 0.90}Sr{sub 0.10}Ga{sub 1−x}Ni{sub x}O{sub 3.00−δ} (where x=0.10, and 0.20 (mol)) presents a rhombohedral symmetry with a lattice volume that decreases when NiO dopant increases. Besides the perovskite, LaSrGa{sub 3.00}O{sub 7.00} (nominal composition) is present as second phase in all cases. When the samples are doped with NiO, the peaks of this second phase are shifted with respect to the peaks of the pure phase. These shifts suggest that this second phase could admit some Ni ions in its structure. According to the XRD patterns, the amount of the latter phase is larger when sintering time is increased. Electron probe microanalysis (EPMA) indicated that the matrix of the samples sintered for 6 h is constituted by a perovskite with an experimental composition very close to the nominal one. However, when the samples are sintered for 48 h the matrix of each sample is constituted by two perovskites; both with compositional deviations with respect to their nominal one. In particular, a significant Sr depletion compensated by a La increment in the A site is observed. Those compositional deviations could be mainly due to the diffusion of the cations in the bulk and/or from the bulk to the surface of the samples. That diffusion can favour the formation, not only, of a second perovskite with a different composition in relation with the first one formed, but also, the formation of second phases. In addition, a very slight broadening of Bragg peaks of the perovskites sintered for 48 h is observed by XRD and can be related to the presence of two different perovskites in each sample according to EPMA results. By BSEM and EPMA analyses La{sub 4.00}Ga{sub 2.00}O{sub 9.00} (nominal composition) is also observed as second phase when samples are treated for 48 h. - Graphical abstract: Typical microstructures, observed by FEG-SEM, of La{sub 0.90}Sr{sub 0.10}Ga{sub 1−x}Ni{sub x}O{sub 3.00−δ} materials with x=0.00 and 0.10 (nominal compositions) and sintered at 1450 °C for 48 h after polishing and thermal etching are shown. Lighter grey grains with a bimodal grain size are observed and according to XEDS analysis correspond to two perovskites with different experimental compositions (labelled as 1 and 2 for x=0.00 and labelled as 4 and 5 for x=0.10, respectively), meanwhile the darker grey phases correspond to LaSrGa{sub 3.00}O{sub 7.00} (labelled as 3 for x=0.00) and LaSr(Ga{sub 1−y′},Ni{sub y′}){sub 3.00}O{sub 7.00} (labelled as 6 for x=0.10), respectively. - Highlights: • When NiO is introduced into La{sub 0.90}Sr{sub 0.10}GaO{sub 3.00−δ} a change in symmetry is produced. • A significant Sr depletion in the A-site of perovskites treated for 48 h is observed. • Compositional deviations could be due to a thermally-activated diffusional process. • The phase purity of these materials is deteriorated when the sintering time is extended.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Fourier plane colorimetric sensing using broadband imaging of surface plasmons and application to biosensing

We demonstrate an optical technique for refractive index and thickness sensing of sub-wavelength-thick dielectric analytes. The technique utilizes the broadband, multimode, directional leakage radiation arising from the excitation of hybrid mode surface plasmons (SP) on low aspect ratio periodic plasmonic substrates with period ≈λ. The approach requires relaxed fabrication tolerances compared to extra ordinary transmission-based sensing techniques, wherein minor shifts in the fabricated dimensions result in a very large change from the designed resonant wavelength. We show that refractive index perturbations due to about 10-nm-thick dielectric can be captured optically by the usage of carefully designed plasmonic substrates, a halogen lamp source, free-space optical components, polarizers, and a low-end, consumer-grade charge coupled device camera. The plasmonic substrates were designed for converting the signature of hybrid mode SP excitation into a transmission peak by utilizing a thin homogeneous metal layer sandwiched between the periodic plasmonic structures and the substrate. The resonance is highly sensitive to the refractive index and thickness of the analyte superstrate. The excitation of hybrid mode SP results in a polarization rotation of 90° of the leaked radiation at resonant wavelength. In order to eliminate the problem of image registration (i.e., placing the same feature in the same pixel of the image, for comparison before and after a change in refractive index) for sensing, we perform the color analysis in the Fourier plane. The change in color of the bright emitted spot with highest momentum, corresponding to the leakage of fundamental SP mode, was used to measure the changes in refractive index, whereas the number and color of spots of lower momenta, corresponding to higher-order Fabry Perot modes, was used to measure the variation in thickness. We further show that the Fourier plane analysis can also be used to sense the index of thicker dielectrics, where real plane image analysis may fail to sense index perturbations, simply due to superposition of different modes in the real plane images of such substrates. Control experiments and analysis revealed a refractive index resolution of 10{sup –5} RIU. The results were correlated with simulations to establish the physical origin of the change in the fundamental mode and higher-order modes due to the refractive index and thickness of analyte. As a demonstration of an application and to test the limits of sensing, the substrates were used to image the surface functionalization using 2-nm-thick 11-mercaptoundecanoic acid and immobilization of 7-nm-thick mouse anti-human IgG antibody. In biological systems, where a priori knowledge about a process step is available, where accurate chemical composition testing is not necessary or possible, the presented method could be used to study the surface changes using a label-free sensing mechanism.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Understanding the influence of iron on crystallization kinetics of nepheline based glasses - 15472

Hanford site in Washington is home to 55 million US gallons of high level radioactive waste rich in sodium, alumina and iron. The strategy is to vitrify this waste in borosilicate glasses. Crystallization of nepheline/carnegeite (NaAlSiO{sub 4}) in glass melts during vitrification and canister cooling is a big challenge as it severely deteriorates the chemical durability of the glass. As the HLW borosilicate glasses are similar to basalt glass on a borate-free basis and as no borate phase crystallize on the liquidus, the crystallization chemistry of waste glasses can be described by the known phase relations of the geochemical basalt quaternary Na{sub 2}O-Al{sub 2}O{sub 3}-Fe{sub 2}O{sub 3}-SiO{sub 2} system. The objective of this study is to understand the influence of iron on the thermal stability and crystallization kinetics of model sodium- and alumina- rich simplified silicate glasses in the Na{sub 2}O-Al{sub 2}O{sub 3}-Fe{sub 2}O{sub 3}-SiO{sub 2} system designed in the primary crystallization field of nepheline. The results obtained from this study will form the baseline for understanding the nucleation and crystallization kinetics of multicomponent complex nuclear waste glasses in future. A series of glasses with compositions 25Na{sub 2}O-(25-z) Al{sub 2}O{sub 3}-zFe{sub 2}O{sub 3} -50SiO{sub 2} (mol.%) where z varies between 0 -5% has been prepared by melt-quench technique. Glasses have been labelled in reference to their Fe{sub 2}O{sub 3} content, i.e. Fe-z. We could not obtain amorphous glasses with Fe{sub 2}O{sub 3} > 5 mol.% . Glass batches comprising oxides and carbonates were melted at 1650 deg. C in Pt-Rh crucibles for 2 h. The melts were quenched in cold water to yield ∼90 g of glass. Thermal stability and crystallization kinetics of glasses was studied using differential thermal analysis (DTA). Thermal scans (30-1580 deg. C) were collected on glass particles (particle size: 0.5 mm-1 mm) at four different heating rates: 5, 10, 15 and 20 K min{sup -1} in air and inert (N{sub 2}) atmosphere. Non-isothermal crystallization kinetics of the glasses was studied using the Augis-Bennett method and Ozawa method. In accordance with the crystallization data obtained from DTA, glasses were heated in the crystallization temperature range and air quenched. Glasses were also heated from 30 deg. C to 800, 900 and 1000 deg. C for 1 h, respectively, in air and inert (N{sub 2}) atmospheres, at heating rate of 10 K min{sup -1}. Resulting glass-ceramics were characterized for their crystalline phase evolution by X-ray diffraction (XRD) and scanning electron microscopy (SEM). Conversion of melt -to glass-ceramic during cooling DTA data was also collected for all the glasses during their conversion from melt -to -glass-ceramic during cooling at different cooling rates, in air and inert (N{sub 2}) atmosphere. In accordance with the DTA data, conversion of melt to glass-ceramic during cooling was studied by re-melting the glass frit in Pt-Rh crucibles at 1650 deg. C. The melt was allowed to cool at 10 K min{sup -1} and was air quenched at different temperatures (as per DTA data). The as obtained glass-ceramics were characterized by XRD and SEM Incorporation of Fe{sub 2}O{sub 3} in glasses decreases their crystallization temperature and increases their crystallization tendency. Parent glass (stoichiometric nepheline composition) is prone to surface crystallization. Incorporating 5 mol.% Fe{sub 2}O{sub 3} in these glasses transforms the crystallization kinetics from surface to volume nucleation. Crystallization kinetics of glass Fe-2.5 is affected by the environment (N{sub 2} vs. Air) while no significant impact of environment could be seen for glass Fe-5. Devitrification in all the glasses begins with the crystallization of carnegeite (NaAlSiO{sub 4}, orthorhombic) (∼1200 deg. C). Prolonged heat treatments leads to the crystallization of nepheline (NaAlSiO{sub 4}, hexagonal) (∼1200 deg. C) as a secondary phase. Fe{sub 2}O{sub 3} promotes the crystallization of nepheline over carnegeite via formation of magnetite as nucleation site. Iron incorporation pre-nucleates the glasses which upon heat treatment result in the formation of magnetite phase as nucleation sites, thus, shifting the mechanism of crystallization from surface to volume. Unlike carnegeite, the crystal structure of nepheline allows partial substitution of Fe{sup 3+}/Al{sup 3+}. This promotes the crystallization of nepheline over carnegeite in iron-containing glasses. Iron incorporation in nepheline-based sodium aluminosilicate glasses shifts crystallization mechanism from surface to bulk. Our results indicate that atmosphere does affect the crystallization kinetics of iron-containing aluminosilicate glasses but only when Fe{sub 2}O{sub 3} concentration is low. Since nepheline crystal structure can easily accommodate iron in comparison to carnegeite, iron seems to promote nepheline formation in these glasses at the expense of carnegeite through formation of Fe{sub 3}O{sub 4} phase as nucleation site. Future work will be focused on adding compositional complexity to these glasses and studying them further for their nucleation and crystallization behavior.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗