Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “interval analysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14
All sourcesNASA NTRSDOE OSTI
NASA NTRSDate not supplied

Parametric Study of Federated Conflict Resolution for UAM Operations

This work presents a federated conflict resolution algorithm and its parametric study for UAM operations. A federated speed-control-based conflict resolution algorithm is introduced first, including its rules of the road, data exchange requirement, and critical parameters. Two experiments were set up for the parametric study. The first investigates five parameters: look ahead time, resolution update interval, maximum allowed speed reduction, traffic flow interval, and crossing angle. The second experiment studies the uncertainty of departure time. Metrics associated with safety, efficiency, and conflict resolution effort were measured for each scenario. A Design Of Experiment (DOE) analysis was used to perform the multi-factor analysis for the first experiment. It revealed that the crossing angle and flow interval were the most critical parameters across all three metrics, followed by maximum allowed speed reduction. Look ahead time and resolution update interval were of minor significance to safety and conflict resolution effort, but had little to no effect on efficiency. The analysis of the second experiment showed that, given a flow rate, the fluctuation in departure time was absorbed by the conflict resolution algorithm, which resulted in a relatively small fluctuation in airborne delay.

Urban air mobility↗
NASA NTRS1981

A synoptic analysis of the first AVE-SESAME '79 period

Key features of a severe convection observed during April 10-11, 1979 as part of the Atmospheric Variability Experiment-Severe Environmental Storms and Mesoscale Experiment (AVE-SESAME) are examined. Three-hourly rawinsonde readings from 23 stations were taken, and vertical motion and divergence parameters are considered. The data were converted into a 127 km grid at the surface, and at 50 mb intervals from 900 mb to 100 mb by an objective analysis scheme, while a kinematic method was used to compute vertical motion. A weak upper tropospheric short wave trough was found to propagate from New Mexico into the Texas panhandle, while a jet maximum propagated eastward. The development of a strong wind maximum over Oklahoma and Kansas was associated with a rapid increase in upper-level divergence and the development of a small-scale pressure perturbation in the Texas panhandle, as well as a low-level jet and convergence, which led to rapid changes over the Red River Valley, where stability was decreased.

Moore, J. T.↗
DOE OSTI2020

Data from: Comparing traditional and Bayesian approaches to ecological meta-analysis

Despite the wide application of meta-analysis in ecology, some of the traditional methods used for meta-analysis may not perform well given the type of data characteristic of ecological meta-analyses. We reviewed published meta-analyses on the ecological impacts of global climate change, evaluating the number of replicates used in the primary studies (ni) and the number of studies or records (k) that were aggregated to calculate a mean effect size. We used the results of the review in a simulation experiment to assess the performance of conventional frequentist and Bayesian meta-analysis methods for estimating a mean effect size and its uncertainty interval. Our literature review showed that ni and k were highly variable, distributions were right-skewed, and were generally small (median ni =5, median k=44). Our simulations show that the choice of method for calculating uncertainty intervals was critical for obtaining appropriate coverage (close to the nominal value of 0.95). When k was low (<40), 95% coverage was achieved by a confidence interval based on the t-distribution that uses an adjusted standard error (the Hartung-Knapp-Sidik-Jonkman, HKSJ), or by a Bayesian credible interval, whereas bootstrap or z-distribution confidence intervals had lower coverage. Despite the importance of the method to calculate the uncertainty interval, 39% of the meta-analyses reviewed did not report the method used, and of the 61% that did, 94% used a potentially problematic method, which may be a consequence of software defaults. In general, for a simple random-effects meta-analysis, the performance of the best frequentist and Bayesian methods were similar for the same combinations of factors (k and mean replication), though the Bayesian approaches had higher than nominal (>95%) coverage for the mean effect when k was very low (k<15). Our literature review suggests that many meta-analyses that used z-distribution or bootstrapping confidence intervals may have over-estimated the statistical significance of their results when the number of studies was low; more appropriate methods need to be adopted in ecological meta-analyses.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

3-D Geologic Controls of Hydrothermal Fluid Flow at Brady geothermal field, Nevada, USA

In many hydrothermal systems, fracture permeability along faults provides pathways for groundwater to transport heat from depth. Faulting generates a range of deformation styles that cross-cut heterogeneous geology, resulting in complex patterns of permeability, porosity, and hydraulic conductivity. Vertical connectivity (a throughgoing network of permeable areas that allows advection of heat from depth to the shallow subsurface) is rare and is confined to relatively small volumes that have highly variable spatial distribution. This local compartmentalization of connectivity represents a significant challenge to understanding hydrothermal circulation and for exploring, developing, and managing hydrothermal resources. Here, we present an evaluation of the geologic characteristics that control this compartmentalization in hydrothermal systems through 3-D analysis of the Brady geothermal field in western Nevada. A published 3-D geologic map of the Brady area is used as a basis to develop structural and geological variables that are hypothesized to control or effect permeability or connectivity. The 3-D distribution of these variables is compared to the distribution of productive and non-productive fluid flow intervals along production wells and non-productive wells via principal component analysis (PCA). This comparison elucidates which geologic and structural variables are most closely associated with productive fluid flow intervals. Results indicate that production intervals at Brady are located: (1) within or near to known and stress-loaded macro-scale faults, and (2) in areas of high fault and fracture density.

58 GEOSCIENCES↗
DOE OSTI2022

Multiscale spatial analysis of fracture arrangement and pattern reconstruction using Ripley's K-function

This work presents novel multiscale spatial data analytics using Ripley's K-function, as a measure of spatial interaction, to study one-dimensional arrangement of fractures. Fracture spatial arrangements are classified into clustered, anticlustered, or indistinguishable from random by testing statistical significance of the calculated Ripley's K-function. Characterizations of fracture arrangements are performed as a function of length scale and position. Analysis of the K-function along the study interval identifies where fracture clustering and anticlustering occur. Here, a simulation technique is also introduced here to statistically reconstruct spatial arrangements and to generate fracture realizations that are spatially similar to the fractures observed in the field. With this simulation technique, one can also fill spatial gaps in fracture measurements where data are absent, unreliable, or unused. Synthetic as well as field-measured 1D fracture datasets are used for testing and demonstration. Methods introduced in this work can be readily applied to fracture datasets observed in outcrops, borehole image logs, and cores.

58 GEOSCIENCES↗
NASA NTRS1997

Altered fractal dynamics of gait: reduced stride-interval correlations with aging and Huntington's disease

Fluctuations in the duration of the gait cycle (the stride interval) display fractal dynamics and long-range correlations in healthy young adults. We hypothesized that these stride-interval correlations would be altered by changes in neurological function associated with aging and certain disease states. To test this hypothesis, we compared the stride-interval time series of 1) healthy elderly subjects and young controls and of 2) subjects with Huntington's disease and healthy controls. Using detrended fluctuation analysis we computed alpha, a measure of the degree to which one stride interval is correlated with previous and subsequent intervals over different time scales. The scaling exponent alpha was significantly lower in elderly subjects compared with young subjects (elderly: 0.68 +/- 0.14; young: 0.87 +/- 0.15; P < 0.003). The scaling exponent alpha was also smaller in the subjects with Huntington's disease compared with disease-free controls (Huntington's disease: 0.60 +/- 0.24; controls: 0.88 +/-0.17; P < 0.005). Moreover, alpha was linearly related to degree of functional impairment in subjects with Huntington's disease (r = 0.78, P < 0.0005). These findings demonstrate that strike-interval fluctuations are more random (i.e., less correlated) in elderly subjects and in subjects with Huntington's disease. Abnormal alterations in the fractal properties of gait dynamics are apparently associated with changes in central nervous system control.

NASA Discipline Cardiopulmonary↗
DOE OSTI2020

Comparing traditional and Bayesian approaches to ecological meta‐analysis

Abstract Despite the wide application of meta‐analysis in ecology, some of the traditional methods used for meta‐analysis may not perform well given the type of data characteristic of ecological meta‐analyses. We reviewed published meta‐analyses on the ecological impacts of global climate change, evaluating the number of replicates used in the primary studies ( n i ) and the number of studies or records ( k ) that were aggregated to calculate a mean effect size. We used the results of the review in a simulation experiment to assess the performance of conventional frequentist and Bayesian meta‐analysis methods for estimating a mean effect size and its uncertainty interval. Our literature review showed that n i and k were highly variable, distributions were right‐skewed and were generally small (median n i = 5, median k = 44). Our simulations show that the choice of method for calculating uncertainty intervals was critical for obtaining appropriate coverage (close to the nominal value of 0.95). When k was low (<40), 95% coverage was achieved by a confidence interval (CI) based on the t distribution that uses an adjusted standard error (the Hartung–Knapp–Sidik–Jonkman, HKSJ), or by a Bayesian credible interval, whereas bootstrap or z distribution CIs had lower coverage. Despite the importance of the method to calculate the uncertainty interval, 39% of the meta‐analyses reviewed did not report the method used, and of the 61% that did, 94% used a potentially problematic method, which may be a consequence of software defaults. In general, for a simple random‐effects meta‐analysis, the performance of the best frequentist and Bayesian methods was similar for the same combinations of factors ( k and mean replication), though the Bayesian approach had higher than nominal (>95%) coverage for the mean effect when k was very low ( k < 15). Our literature review suggests that many meta‐analyses that used z distribution or bootstrapping CIs may have overestimated the statistical significance of their results when the number of studies was low; more appropriate methods need to be adopted in ecological meta‐analyses.

Pappalardo, Paula↗
DOE OSTI2021

3-D Geologic Controls of Hydrothermal Fluid Flow at Brady Geothermal Field, Nevada using PCA

In many hydrothermal systems, fracture permeability along faults provides pathways for groundwater to transport heat from depth. Faulting generates a range of deformation styles that cross-cut heterogeneous geology, resulting in complex patterns of permeability, porosity, and hydraulic conductivity. Vertical connectivity (a through going network of permeable areas that allows advection of heat from depth to the shallow subsurface) is rare and is confined to relatively small volumes that have highly variable spatial distribution. This local compartmentalization of connectivity represents a significant challenge to understanding hydrothermal circulation and for exploring, developing, and managing hydrothermal resources. Here, we present an evaluation of the geologic characteristics that control this compartmentalization in hydrothermal systems through 3-D analysis of the Brady geothermal field in western Nevada. A published 3-D geologic map of the Brady area is used as a basis to develop structural and geological variables that are hypothesized to control or effect permeability or connectivity. The 3-D distribution of these variables is compared to the distribution of productive and non-productive fluid flow intervals along production wells and non-productive wells via principal component analysis (PCA). This comparison elucidates which geologic and structural variables are most closely associated with productive fluid flow intervals. Results indicate that production intervals at Brady are located: (1) within or near to known and stress-loaded macro-scale faults, and (2) in areas of high fault and fracture density. This submission includes the published journal article detailing this work, the published 3-D geologic map of the Brady Geothermal Area used as a basis to develop structural and geological variables that are hypothesized to control or effect permeability or connectivity, 3-D well data, along which geologic data were sampled for PCA analyses, and associated metadata file. This work was done using existing R programs.

15 GEOTHERMAL ENERGY↗
DOE OSTI2023

Obesity is associated with biliary tract cancer mortality and incidence: A pooled analysis of 21 cohort studies in the Asia Cohort Consortium

Abstract Body fatness is considered a probable risk factor for biliary tract cancer (BTC), whereas cholelithiasis is an established factor. Nevertheless, although obesity is an established risk factor for cholelithiasis, previous studies of the association of body mass index (BMI) and BTC did not take the effect of cholelithiasis fully into account. To better understand the effect of BMI on BTC, we conducted a pooled analysis using population‐based cohort studies in Asians. In total, 905 530 subjects from 21 cohort studies participating in the Asia Cohort Consortium were included. BMI was categorized into four groups: underweight (<18.5 kg/m 2 ); normal (18.5‐22.9 kg/m 2 ); overweight (23‐24.9 kg/m 2 ); and obese (25+ kg/m 2 ). The association between BMI and BTC incidence and mortality was assessed using hazard ratios (HR) and 95% confidence intervals (CIs) by Cox regression models with shared frailty. Mediation analysis was used to decompose the association into a direct and an indirect (mediated) effect. Compared to normal BMI, high BMI was associated with BTC mortality (HR 1.19 [CI 1.02‐1.38] for males, HR 1.30 [1.14‐1.49] for females). Cholelithiasis had significant interaction with BMI on BTC risk. BMI was associated with BTC risk directly and through cholelithiasis in females, whereas the association was unclear in males. When cholelithiasis was present, BMI was not associated with BTC death in either males or females. BMI was associated with BTC death among females without cholelithiasis. This study suggests BMI is associated with BTC mortality in Asians. Cholelithiasis appears to contribute to the association; and moreover, obesity appears to increase BTC risk without cholelithiasis.

Oze, Isao↗
NASA NTRS1998

Heart rate dynamics in patients with stable angina pectoris and utility of fractal and complexity measures

Dynamic analysis techniques may uncover abnormalities in heart rate (HR) behavior that are not easily detectable with conventional statistical measures. However, the applicability of these new methods for detecting possible abnormalities in HR behavior in various cardiovascular disorders is not well established. Conventional measures of HR variability were compared with short-term (< or = 11 beats, alpha1) and long-term (> 11 beats, alpha2) fractal correlation properties and with approximate entropy of RR interval data in 38 patients with stable angina pectoris without previous myocardial infarction or cardiac medication at the time of the study and 38 age-matched healthy controls. The short- and long-term fractal scaling exponents (alpha1, alpha2) were significantly higher in the coronary patients than in the healthy controls (1.34 +/- 0.15 vs 1.11 +/- 0.12 [p <0.001] and 1.10 +/- 0.08 vs 1.04 +/- 0.06 [p <0.01], respectively), and they also had lower approximate entropy (p <0.05), standard deviation of all RR intervals (p <0.01), and high-frequency spectral component of HR variability (p <0.05). The short-term fractal scaling exponent performed better than other heart rate variability parameters in differentiating patients with coronary artery disease from healthy subjects, but it was not related to the clinical or angiographic severity of coronary artery disease or any single nonspectral or spectral measure of HR variability in this retrospective study. Patients with stable angina pectoris have altered fractal properties and reduced complexity in their RR interval dynamics relative to age-matched healthy subjects. Dynamic analysis may complement traditional analyses in detecting altered HR behavior in patients with stable angina pectoris.

NASA Discipline Cardiopulmonary↗
DOE OSTI2026

SPRUCE Bud Cold Hardiness of Trees and Shrubs in Experimental Plots, Marcell Experimental Forest, Minnesota, 2021-2025

This dataset contains bud cold hardiness measurements from the Spruce and Peatland Responses Under Changing Environments (SPRUCE) experimental site (Hanson et al, 2017) within the Marcell Experimental Forest in northern Minnesota, USA. Cold hardiness was quantified as the temperature at which low temperature exotherms (LTEs) were identified (i.e., the temperature at which supercooled water within a bud freezes) measured by differential thermal analysis (DTA). Buds were sampled at semi-regular intervals from September 2021 through May 2025 (2021-09-25 to 2025-05-21) across four seasons (2021-2022 through 2024-2025) for four co-occurring boreal peatland tree and shrub species: Picea mariana (PIMA), Larix laricina (LALA), Rhododendron groenlandicum (RHGR), and Chamaedaphne calyculata (CHCA). Samples were collected across the experiment's warming gradient (ambient to +9 degrees Celsius (C)) and pooled by species within each enclosure. These data were used to assess the species- and season-specific effects of experimental warming on cold hardiness and cold damage risk in boreal peatland vegetation (Campos-Arguedas et al, accepted). This dataset contains one data file in comma-separate values (*.csv) format. Additional metadata are provided: a data dictionary and a file-level metadata file in comma-separate values (*.csv) format and a user guide in PDF (*.pdf) format.

Chamaedaphne calyculata↗
DOE OSTI2022

Improved Data Interpretation through Identification of Time Series Periodicity Changes

Analysis and interpretation of time series data is easiest when the data values occur at uniform intervals in time, but actual data may have differing data sampling frequencies, such as monthly and daily readings. Applying data analysis techniques, such as smoothing, to such a data set may not give a representative result between time segments. The ability to automatically distinguish time segments of differing data frequency would provide a means for applying data analysis independently to each segment, though a suitable blending at segment boundaries would be required. A method for detecting frequency changes was developed and applied to Gaussian and median smoothing of hydraulic head data from groundwater wells at the U.S. Department of Energy Hanford Site in southeastern Washington state. The process identifies time segments of high-frequency (daily) or low-frequency (greater than daily) data using adjusted-bandwidth Gaussian kernel density estimation and a threshold value, which are further refined to address small blocks of low-frequency data within larger blocks of high-frequency data. User-selectable levels of smoothing are then applied independently to the time segments prior to combining the segment results for a single smoothed data set. This time segment identification approach provides effective low- and high-frequency data separation, which provides a method to apply data analysis independently to each time segment.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2025

Deriving Stable Peak Models to Fit Complex XPS Data From Cu Contaminated Pt Electrocatalysts

X-ray Photoelectron Spectroscopy spectra peak models, designed to partition photoemission signals emanating from different elements or chemical states within an atom, are fitted to data limited to an energy interval over which inelastically scattered photoemission signal can be estimated. While the choice of background approximation and line shapes of components to the peak model requires careful consideration, the energy interval used to define the data to which the peak model is optimized has a significant impact on the final peak model. The relationship between the background intensity and data intensity at the start and end of the energy interval dictates the line shapes used in the peak model. In this work, we devise a method to peak fit a complex overlapping Cu 3p and Pt 4f XPS peak structure to perform the elemental quantification. We first use an Al 2s peak to illustrate how background curves approach data at the limits of the energy interval over which the background is defined, influencing the analysis of XPS spectra. Next, we demonstrate the nature of interactions between specific line shapes (Voigt and pseudo-Voigt profiles) suitable for photoemission peaks and a specific background curve (Shirley) and a peak model is presented that includes components to the peak model that accommodates background intensity during fitting of the peak model to data. The peak model allowed for quantification of the contributions of Pt 4f peaks emanating from the substrate that exhibits strong asymmetry in the presence of the inhomogeneously distributed Cu species, mostly of Lorentzian character.

XPS↗
DOE OSTI2024

Deep learning-enabled probing of irradiation-induced defects in time-series micrographs

Modeling time-series data with convolutional neural networks (CNNs) requires building a model to learn in batches as opposed to training sequentially. Coupling CNNs with in situ or operando techniques opens the possibility of accurately segmenting dynamic reactions and mass transport phenomena to understand how materials behave under the conditions in which they are used. In this article, in situ ion irradiation transmission electron microscopy (TEM) images are used as inputs into the CNN to assess the defect generation rate, defect cluster density, and saturation of defects. We then use the output segmentation maps to correlate with conventional TEM micrographs to assess the model’s ability to detail nanoscale interactions. Next, we discuss the implications of preprocessing and hyperparameters on model variability, accuracy when expanded to other datasets, and the role of regularization when controlling model variance. Ultimately, we eliminate human bias when extrapolating physical metrics, speed up analysis time, decouple reactions that happen at 100 ms intervals, and deploy models that are both accurate and transferable to similar experiments.

Burns, Kory (ORCID:0000000158019909)↗
DOE OSTI2026

A single genomic region controls primocane fruiting in tetraploid blackberry

The fresh-market blackberry ( Rubus subgenus Rubus ) industry has expanded dramatically in the past 2 decades, driven in part by improved cultivars. Introgression of the primocane-fruiting (PF; annual flowering) trait into elite germplasm has enabled dual cropping in a single year, season extension, and cultivation in tropical and subtropical regions. Despite its economic performance, the genetic basis of PF is not well understood. It has been proposed that the PF trait is controlled by a major recessive locus, but its genomic location is unclear. Here, a genome-wide association study (GWAS) of 365 tetraploid blackberry genotypes identified a single genomic region on chromosome Ra03 (∼33 Mb) strongly associated with PF. Genetic linkage analysis in a biparental population confirmed that the same interval (32–35 Mb) was linked to the PF phenotype. Ten putative candidate genes were identified in this region. Allele mining using whole-genome resequencing of 17 genotypes highlighted 2 high-priority candidates: a CCCH-type zinc finger gene and an ubiquitin-specific protease gene. Use of an improved Rubus argutus “Hillquist” genome annotation (v1.2) enabled refined variant interpretation, including identification of regulatory 3′ UTR polymorphisms in the zinc finger homolog. Two diagnostic KASP markers (PF1 and PF2), designed from the most significant GWAS SNPs, predicted the PF phenotype with over 96% accuracy in a validation panel of 494 tetraploid blackberries from multiple breeding programs. Together, these results provide the first high-resolution mapping of the PF locus in blackberry, identify candidate genes for flowering regulation in Rubus , and deliver diagnostic markers that can be immediately deployed in breeding programs.

GWAS↗
DOE OSTI2023

A Dark Siren Measurement of the Hubble Constant with the LIGO/Virgo Gravitational Wave Event GW190412 and DESI Galaxies

Abstract We present a measurement of the Hubble Constant H 0 using the gravitational wave event GW190412, an asymmetric binary black hole merger detected by LIGO/Virgo, as a dark standard siren. This event does not have an electromagnetic counterpart, so we use the statistical standard siren method and marginalize over potential host galaxies from the Dark Energy Spectroscopic Instrument (DESI) survey. GW190412 is well-localized to 12 deg 2 (90% credible interval), so it is promising for a dark siren analysis. The dark siren value for H 0 = 85.4 − 33.9 + 29.1 km s −1 Mpc −1 , with a posterior shape that is consistent with redshift overdensities. When combined with the bright standard siren measurement from GW170817 we recover H 0 = 77.96 − 5.03 + 23.0 km s −1 Mpc −1 , consistent with both early and late-time Universe measurements of H 0 . This work represents the first standard siren analysis performed with DESI data, and includes the most complete spectroscopic sample used in a dark siren analysis to date.

Ballard, W.↗
NASA NTRS1974

Green corona and solar sector structure

Analysis of the green-line corona for the interval 1947-1970 suggests the existence of large-scale organization of the emission. The green-line emission at high northern latitudes (approximately 40 to 60 deg) is correlated with the emission at high southern latitudes 6, 15, and 24 days later, while the low-latitude green corona seems to be correlated on both sides of the equator with no time lag. These coronal features are recurrent with a 27-day period at all latitudes between plus or minus 60 deg, and these large-scale structures are believed to be associated with the solar magnetic sector structure. The high correlation between northern and southern high-latitude emission at 15 days time lag is explained as a signature of a two-sector structure, while four sectors are associated with the 6- and 24-day peaks.

Antonucci, E.↗
NASA NTRS1977

Reliability measurement during software development

Measurement of software reliability was carried out during the development of data base software for a multi-sensor tracking system. Every run made during this project was scored as success or failure, and supporting data were collected on forms for further analysis. The failure ratio (number of failures per calendar interval divided by total number of runs) and failure rate (number of failures divided by CPU time for the interval) were found to be consistent measures, on a month-to-month basis as well as from module to module, and therefore considered valid indicators of reliability in this environment. Trend lines could be established from these measurements that provide good visualization of the progress on the job as a whole as well as on individual modules. Over one-half of the observed failures were due to factors associated with the specific run submission rather than with the code proper.

Hecht, H.↗