Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “high resolution microscopy”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14

PbI 2 Nanocrystal Growth by Atomic Layer Deposition from Pb(tmhd) 2 and HI

Atomic layer deposition (ALD) allows for fine control over the thickness, stoichiometry, and structural defects of materials. ALD provides a suitable route to deposit lead halides, which can further be converted to perovskites for photovoltaics, photoemission, and photodetection, among other applications. Deposition of lead halides by ALD has already begun to be explored; however, the precursors used in published processes are highly hazardous, require expensive fabrication processes, or contain impurities that can jeopardize the optoelectronic properties of metal halide perovskites after conversion. In this work, we deposited lead iodide (PbI 2 ) by a facile ALD process involving only two readily accessible and low-cost precursors. PbI 2 nanocrystals were grown on soda-lime glass (SLG), silicon dioxide support grids, and silicon wafer substrates and provided the groundwork for further investigation into developing lead halide perovskite processes by ALD. Further, the ALD-grown PbI 2 was characterized by annular dark-field scanning transmission electron microscopy (ADF-STEM), atomic force microscopy (AFM), high resolution transmission electron microscopy (HRTEM), X-ray fluorescence (XRF), and X-ray photoemission spectroscopy (XPS), among other methods. This work presents the first step to synthesize lead halide perovskites with atomic control for applications such as interfacial layers in photovoltaics and for deposition in microcavities for lasing.

36 MATERIALS SCIENCE↗

Conduction at domain walls in oxide multiferroics

Domain walls may play an important role in future electronic devices, given their small size as well as the fact that their location can be controlled. Here, we report the observation of room-temperature electronic conductivity at ferroelectric domain walls in the insulating multiferroic BiFeO{sub 3}. The origin and nature of the observed conductivity are probed using a combination of conductive atomic force microscopy, high-resolution transmission electron microscopy and first-principles density functional computations. Our analyses indicate that the conductivity correlates with structurally driven changes in both the electrostatic potential and the local electronic structure, which shows a decrease in the bandgap at the domain wall. Additionally, we demonstrate the potential for device applications of such conducting nanoscale features.

36 MATERIALS SCIENCE↗

Aligned three-dimensional prismlike magnesium nanostructures realized onto silicon substrate

A simple approach is proposed to realize three-dimensional (3D) prismlike Mg nanostructures, which has several advantages over previous investigations such as suitable for mass production, reduced impurities, tailored dimensions, and easier integration into microsystem. 3D Mg nanostructures are realized onto silicon substrate using a conventional thermal evaporator, where the incident angle of Mg vapor flux with respect to the substrate surface normal is fixed at 88 deg. The as-prepared 3D Mg nanostructures are characterized by scanning electron microscopy, x-ray diffraction, energy dispersive x-ray analysis, transmission electron microscopy, high-resolution transmission electron microscopy, and surface area measurement.

36 MATERIALS SCIENCE↗

Superhard Diamond/tungsten Carbide Nanocomposites

We investigated the processing conditions of diamond/tungsten carbide (WC) composites using in situ synchrotron x-ray diffraction (XRD) and reactive sintering techniques at high pressure and high temperatures. The as-synthesized composites were characterized by synchrotron XRD, scanning electron microscopy, high-resolution transmission electron microscopy, and indentation hardness measurements. Through tuning of the reaction temperature and time, we produced fully reacted, well-sintered, and nanostructured diamond composites with Vickers hardness of about 55 GPa and the grain size of WC binding matrix smaller than 50 nm. A specific set of orientation relationships between WC and tungsten is identified to gain microstructural insight into the reaction mechanism between diamond and tungsten.

36 MATERIALS SCIENCE↗

Fermi level tuning of topological insulator Bi{sub 2}(Se{sub x}Te{sub 1-x}){sub 3} nanoplates

The crystal structures and morphologies of ternary Bi{sub 2}(Se{sub x}Te{sub 1-x}){sub 3} nanoplates have been systematically characterized by employing atomic force microscopy, scanning electron microscopy, high-resolution transmission electron microscopy equipped with the energy dispersive X-ray spectrometer, and the X-ray diffraction. We find that the Bi{sub 2}(Se{sub x}Te{sub 1-x}){sub 3} nanoplates exhibit uniform charge and surface potential distributions. And their Fermi levels can be effectively tuned up to 0.23 eV by varying the selenium/tellurium composition ratios.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

The emergence of magnetic properties in (Pb{sub 0.845}Sm{sub 0.08}Fe{sub 0.035})(Ti{sub 0.98}Mn{sub 0.02})O{sub 3} and (Pb{sub 0.88}Nd{sub 0.08})(Ti{sub 0.98}Mn{sub 0.02})O{sub 3} perovskite ceramics

The emergence of magnetic properties and quadratic magnetoelectric coupling in a material with outstanding ferroelectric properties has been pursued. Thus, the multiferroicity driven by the substitution of rare earth R{sup 3+} ions (R = Sm, Nd) on the A-site of PbTiO{sub 3} perovskite ceramics has been investigated. In some samples, a transition element with large ionic radius, like Fe{sup 2+}, has been also added on the A site. Polycrystalline ceramic samples with composition (Pb{sub 1-3x/2-y}R{sub x}Fe{sub y}) (Ti{sub 0.98}Mn{sub 0.02})O{sub 3} (R = Sm; x = 0.08, y = 0.035) and (Pb{sub 1−3x/2}R{sub x})(Ti{sub 0.98}Mn{sub 0.02})O{sub 3} (R = Nd, x = 0.08) have been prepared by conventional solid state ceramic processing, starting from reagent grade oxide powders. X-ray diffraction analysis confirmed the obtaining of a crystalline phase with tetragonal P4 mm symmetry. Transmission electron microscopy and high resolution transmission electron microscopy investigations have been carried out in order to analyze the local structure. Temperature dependence of dielectric permittivity revealed a strong anomaly at the temperature T{sub c} of the paraelectric-ferroelectric phase transition. Transition temperature values depend on the R ion type and are lower than in pure lead titanate by 80–100 K. A broad anomaly of dielectric permittivity is found below 140–180 K, where magnetization also increases due to the quadratic magnetoelectric coupling between ferroelectric and magnetic states. For the (Pb{sub 0.845}Sm{sub 0.08}Fe{sub 0.035})(Ti{sub 0.98}Mn{sub 0.02})O{sub 3} composition, the piezoelectric charge coefficient at room temperature was d{sub 31} ∼−6.5 pC/N and the remanent magnetization M{sub r} at room temperature was about 0.1 emu/g.

36 MATERIALS SCIENCE↗

A comprehensive secondary ion mass spectrometry analysis of ZnO nanowalls: Correlation to photocatalytic responses

We report on the visible light induced photocatalytic responses of zinc oxide (ZnO) nanostructures in the form of nanowires and nanowalls grown on aluminum substrates. Morphological and microstructural characteristics of these nanostructures have been analyzed using scanning electron microscopy (SEM) and high resolution electron microscopy (HRTEM). The presence of surface-adsorbed H{sup +}, O{sub 2}{sup −}, and OH{sup −} species on ZnO nanostructures has been established through secondary ion mass spectrometry (SIMS). The relative change in substrate coverage under varying reaction time has also been evidenced through SIMS and is in agreement with SEM observation. Compared to nanowires, oxygen adsorption on ZnO surfaces and subsequent oxygen in-diffusion are found to be prominent for the nanowall-like structures and are seen to be highest for nanowalls grown in lower reaction time. In contrast to nanowires, nanowalls are found to exhibit higher photocatalytic activity and this can be attributed to higher adsorption of oxygen. The photocatalytic activity of the samples under visible light is originated from the native defect-states and the photocatalytic efficiency is largely influenced by the surface-adsorbants. Control of surface adsorption characteristics of the nanowalls upon tuning wall thicknesses can lead to the development of futuristic efficient photocatalytic devices.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

High-resolution deep view microscopy of cells and tissues

Methods, experimental setups and perspectives of three-dimensional deep view imaging microscopy of cell or tissue samples are reported. Preliminary biophysical and clinically relevant examples are presented. (paper)

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Surface modification of nitrogen-doped carbon nanotubes by ozone via atomic layer deposition

The use of ozone as an oxidizing agent for atomic layer deposition (ALD) processes is rapidly growing due to its strong oxidizing capabilities. However, the effect of ozone on nanostructured substrates such as nitrogen-doped multiwalled carbon nanotubes (NCNTs) and pristine multiwalled carbon nanotubes (PCNTs) are not very well understood and may provide an avenue toward functionalizing the carbon nanotube surface prior to deposition. The effects of ALD ozone treatment on NCNTs and PCNTs using 10 wt. % ozone at temperatures of 150, 250, and 300 °C are studied. The effect of ozone pulse time and ALD cycle number on NCNTs and PCNTs was also investigated. Morphological changes to the substrate were observed by scanning electron microscopy and high resolution transmission electron microscopy. Brunauer-Emmett-Teller measurements were also conducted to determine surface area, pore size, and pore size distribution following ozone treatment. The graphitic nature of both NCNTs and PCNTs was determined using Raman analysis while x-ray photoelectron spectroscopy (XPS) was employed to probe the chemical nature of NCNTs. It was found that O{sub 3} attack occurs preferentially to the outermost geometric surface of NCNTs. Our research also revealed that the deleterious effects of ozone are found only on NCNTs while little or no damage occurs on PCNTs. Furthermore, XPS analysis indicated that ALD ozone treatment on NCNTs, at elevated temperatures, results in loss of nitrogen content. Our studies demonstrate that ALD ozone treatment is an effective avenue toward creating low nitrogen content, defect rich substrates for use in electrochemical applications and ALD of various metal/metal oxides.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Synthesis of Hybrid Materials Based on Iron Nanoparticle-Decorated Multiwalled Carbon Nanotubes

Fe-containing nanoparticles have been grown for the first time on the surface of multiwalled carbon nanotubes by metalorganic chemical vapor deposition using iron acetylacetonate, Fe(acac){sub 3}, as a precursor. The resultant hybrid nanomaterial has been characterized by X-ray diffraction, scanning electron microscopy, high-resolution transmission electron microscopy, and thermogravimetric analysis. The results demonstrate that the synthesized material consists of multiwalled carbon nanotubes whose surface is decorated with iron nanoparticles.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Self-Catalyzed MBE-Grown GaP Nanowires on Si(111): V/III Ratio Effects on the Morphology and Crystal Phase Switching

Self-catalyzed GaP nanowire and GaP/GaPAs nanowire heterostructures have been grown on Si(111) by solid-source molecular beam epitaxy. Formation of wurtzite polytype segments with thicknesses varying from the several tens up to the 500 nm depending on the growth condition has been observed. Effect of the V/III flux ratio on the growth mechanism, nanowire structure and morphology was studied by means of scanning electron microscopy and high resolution transmission electron microscopy.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Synthesis of CdSe/ZnS and CdTe/ZnS Quantum Dots: Refined Digestive Ripening

We report synthesis of CdSe and CdTe quantum dots (QDs) from the bulk CdSe and CdTe material by evaporation/co‐condensation using the solvated metal atom dispersion (SMAD) technique and refined digestive ripening. The outcomes of this new process are (1) the reduction of digestive ripening time by employing ligands (trioctylphosphine oxide (TOPO) and oleylamine (OA)) as capping agent as well as digestive ripening solvent, (2) ability to tune the photoluminescence (PL) from 410 nm to 670 nm, (3) demonstrate the ability of SMAD synthesis technique for other semiconductors (CdTe), (4) direct comparison of CdSe QDs growth with CdTe QDs growth based on digestive ripening times, and (5) enhanced PL quantum yield (QY) of CdSe QDs and CdTe QDs upon covering with a ZnS shell. Further, the merit of this synthesis is the use of bulk CdSe and CdTe as the starting materials, which avoids usage of toxic organometallic compounds, eliminates the hot injection procedure, and size selective precipitation processes. It also allows the possibility of scale up. These QDs were characterized by UV‐vis, photoluminescence (PL), transmission electron microscopy (TEM), high‐resolution transmission electron microscopy (HRTEM), X‐ray photoelectron spectroscopy (XPS), and powder XRD.

Cingarapu, Sreeram↗