Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “haloes”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

First observations of solar halo gamma rays over a full solar cycle

We analyze 15 years of Fermi-LAT data and produce a detailed model of the Sun’s inverse-Compton scattering emission (solar halo), which is powered by interactions between ambient cosmic-ray electrons and positrons with sunlight. By developing a novel analysis method to analyze moving sources, we robustly detect the solar halo at energies between 31.6 MeV and 100 GeV, and angular extensions up to 45° from the Sun, providing new insight into spatial regions where there are no direct measurements of the Galactic cosmic-ray flux. The large statistical significance of our signal allows us to subdivide the data and provide the first 𝛾-ray probes into the time variation and azimuthal asymmetry of the solar modulation potential, finding time-dependent changes in solar modulation both parallel and perpendicular to the ecliptic plane. Our results are consistent with (but with independent uncertainties from) local cosmic-ray measurements, unlocking new probes into astrophysical processes near the solar surface.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2020

Axionic dark matter halos in the gravitational field of baryonic matter

We consider a dark matter halo (DMH) of a spherical galaxy as a Bose–Einstein condensate (BEC) of the ultra-light axions (ULA) interacting with the baryonic matter. In the mean-field (MF) limit, we have derived the integro-differential equation of the Hartree–Fock type for the spherically symmetrical wave function of the DMH component. This equation includes two independent dimensionless parameters: (i) β is the ratio of baryon and axion total mases and (ii) ξ is the ratio of characteristic baryon and axion spatial parameters. We extended our “dissipation algorithm” for studying numerically the ground state of the axion halo in the gravitational field produced by the baryonic component. We calculated the characteristic size, x c of DMH as a function of β and ξ and obtained an analytical approximation for x c .

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2021

HALOS (Heliostat Aimpoint and Layout Optimization Software) [SWR-21-41]

Heliostat Aimpoint and Layout Optimization Software (HALOS) is an open-source software package that allows users to explore solar field layout optimization, aimpoint strategy optimization, and performance characterization of concentrating solar power tower plants. Users interface with the tool through python, and results are reported in time series tables, plots, runtime logs, and flat-file outputs. Users choose from a list of variables such as tower height, receiver capacity, flux limits, design-point irradiance, etc., and specify information about the system using a small collection of flat files. The software can then optimize the specified variables (e.g., aimpoints for each heliostat) to maximize the thermal energy delivered to the receiver while adhering to flux limits. HALOS is implemented to be flexible with respect to flux characterization methods, but includes a direct connection to NREL's SolarPILOT™ software via its python API so that users can utilize high-fidelity flux simulation methods that have already been developed.

Zolan, Alexander↗
DOE OSTI2021

AbacusSummit: Cosmological N-body Halos, Light Cones, Particles, Merger Trees, Initial Conditions, and Power Spectra

This is the primary data release of the AbacusSummit, a suite of large, high-accuracy cosmological N-body simulations. Documentation describing the suite and code, including links to refereed publications and instructions for manipulating the data contained in this release, may be found at the following URL: https://abacussummit.readthedocs.io/ The primary data products presented in this release are halo catalogs, light cones, and particle data. Several supplemental products are also presented: power spectra, initial conditions, and merger trees. Cleaned halo catalogs are also provided for the subset of simulations that were used in refereed publications at the time of this DOI. This release also contains several large scale-free and high-redshift simulations run as part of the same allocation used to produce AbacusSummit.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2020

Design and Analysis of a Halo-Measurement Diagnostics

A large dynamical-range diagnostics (LDRD) design at Jefferson Lab will be used at the FAST-IOTA injector to measure the transverse distribution of halo associated with a high-charge electron beam. One important aspect of this work is to explore the halo distribution when the beam has significant angular momentum (i.e. is magnetized). The beam distribution is measured by recording radiation produced as the beam impinges a YAG:Ce screen. The optical radiation is split with a fraction directed to a charged-couple device (CCD) camera. The other part of the radiation is reflected by a digital micromirror device (DMD) that masks the core of the beam distribution. Combining the images recorded by the two cameras provides a measurement of the transverse distribution with over a large dynamical range. The design and analysis of the optical system will be discussed including optical simulation using SRW and the result of a mockup experiment to test the performances of the system will be presented.

43 PARTICLE ACCELERATORS↗
DOE OSTI2022

The Galactic Distribution of Phosphorus: A Survey of 163 Disk and Halo Stars*

Phosphorus (P) is a critical element for life on Earth, yet the cosmic production sites of P are relatively uncertain. To understand how P has evolved in the solar neighborhood, we measured abundances for 163 FGK stars over a range of –1.09 < [Fe/H] < 0.47 using observations from the Habitable-zone Planet Finder instrument on the Hobby–Eberly Telescope. Atmospheric parameters were calculated by fitting a combination of astrometry, photometry, and Fe I line equivalent widths. Phosphorus abundances were measured by matching synthetic spectra to a P I feature at 10529.52 Å. Our [P/Fe] ratios show that chemical evolution models generally underpredict P over the observed metallicity range. Additionally, we find that the [P/Fe] differs by ~0.1 dex between thin disk and thick disk stars that were identified with kinematics. The P abundances were compared with α-elements, iron-peak, odd-Z, and s-process elements, and we found that the evolution of P in the disk most strongly resembles that of the α-elements. We also find that molar P/C and N/C ratios for our sample match the scatter seen from other abundance studies. Finally, we measure a [P/Fe] = 0.09 ± 0.1 ratio in one low-α halo star and probable Gaia–Sausage–Enceladus member, an abundance ratio ~0.3–0.5 dex lower than the other Milky Way disk and halo stars at similar metallicities. Overall, we find that P is likely most significantly produced by massive stars in core-collapse supernovae, based on the largest P abundance survey to date.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2020

Cosmic Reionization On Computers: The Galaxy-Halo Connection between $5 \leq z \leq10$

We explore the connection between the stellar component of galaxies and their host halos during the epoch of reionization (5 ≤ z ≤ 10) using the CROC (Cosmic Reionization on Computers) simulations. We compare simulated galaxies with observations and find that CROC underpredicts the abundance of luminous galaxies when compared to observed UV luminosity functions, and analogously the most massive galaxies when compared to observed stellar mass functions. We can trace the deficit of star formation to high redshifts, where the slope of the star formation rate to stellar mass relation is consistent with observations, but the normalization is systematically low. This results in a star formation rate density and stellar mass density that are systematically offset from observations. However, the less luminous or lower stellar mass objects have luminosities and stellar masses that agree fairly well with observational data. We explore the stellar-to-halo mass ratio (SHMR), a key quantity that is difficult to measure at high redshifts and that models do not consistently predict. In CROC, the SHMR decreases with redshift, a trend opposite to some abundance-matching studies. These discrepancies uncover where future effort should be focused in order to improve the fidelity of modeling cosmic reionization. We also compare the CROC galaxy bias with observational measurements using Lyman-break galaxy samples, finding reasonable consistency.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2021

Core Mass Estimates in Strong Lensing Galaxy Clusters Using a Single-halo Lens Model

The core mass of galaxy clusters is an important probe of structure formation. Here we evaluate the use of a single-halo model (SHM) as an efficient method to estimate the strong lensing cluster core mass, testing it with ray-traced images from the Outer Rim simulation. Unlike detailed lens models, the SHM represents the cluster mass distribution with a single halo and can be automatically generated from the measured lensing constraints. In this work we find that the projected core mass estimated with this method, $M_{\text{SHM}}$, has a scatter of 8.52% and a bias of 0.90% compared to the "true" mass within the same aperture. Our analysis shows no systematic correlation between the scatter or bias and the lens-source system properties. The bias and scatter can be reduced to 3.26% and 0.34%, respectively, by excluding models that fail a visual inspection test. We find that the SHM success depends on the lensing geometry, with single giant arc configurations accounting for most of the failed cases due to their limiting constraining power. When excluding such cases, we measure a scatter and bias of 3.88% and 0.84%, respectively. Finally, we find that when the source redshift is unknown, the model-predicted redshifts are overestimated, and the $M_{\text{SHM}}$ is underestimated by a few percent, highlighting the importance of securing spectroscopic redshifts of background sources. Our analysis provides a quantitative characterization of $M_{\text{SHM}}$, enabling its efficient use as a tool to estimate the strong lensing cluster core masses in the large samples, expected from current and future surveys.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2021

The AGORA High-resolution Galaxy Simulations Comparison Project. III. Cosmological Zoom-in Simulation of a Milky Way–mass Halo

In this work, we present a suite of high-resolution cosmological zoom-in simulations to z = 4 of a 10 12 M⊙ halo at z = 0, obtained using seven contemporary astrophysical simulation codes (Art-I, Enzo, Ramses, Changa, Gadget-3, Gear, and Gizmo) widely used in the numerical galaxy formation community. The physics prescriptions for gas cooling and heating and star formation are the same as the ones used in our previous Assembling Galaxies of Resolved Anatomy (AGORA) disk comparison but now account for the effects of cosmological processes such as the expansion of the universe, intergalactic gas inflow, and the cosmic ultraviolet background radiation emitted by massive stars and quasars. In this work, we introduce the most careful comparison yet of galaxy formation simulations run by different code groups, together with a series of four calibration steps each of which is designed to reduce the number of tunable simulation parameters adopted in the final run. In the first two steps, we methodically calibrate the gas physics, such as cooling and heating, in simulations without star formation. In the third step, we seek agreement on the total stellar mass produced with the common star formation prescription used in the AGORA disk comparison, in stellar-feedback-free simulations. In the last calibration step, we activate stellar feedback, where each code group is asked to set the feedback prescription to as close to the most widely used one in its code community as possible, while aiming for convergence in the stellar mass at z = 4 to the values predicted by semiempirical models. After all the participating code groups successfully complete the calibration steps, we achieve a suite of cosmological simulations with similar mass assembly histories down to z = 4. With numerical accuracy that resolves the internal structure of a target halo (≲100 physical pc at z = 4), we find that the codes overall agree well with one another, e.g., in gas and stellar properties, but also show differences, e.g., in circumgalactic medium (CGM) properties. We argue that, if adequately tested in accordance with our proposed calibration steps and common parameters, high-resolution cosmological zoom-in simulations can have robust and reproducible results. New code groups are invited to join and enrich this comparison by generating equivalent models or to test the code's compatibility on their own, by adopting the common initial conditions, the common easy-to-implement physics package, and the proposed calibration steps. Further analyses of the zoom-in simulations presented here will be presented in forthcoming reports from the AGORA Collaboration, including studies of the CGM, simulations by additional codes, and results at lower redshift.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2022

The Observed Evolution of the Stellar Mass–Halo Mass Relation for Brightest Central Galaxies

We quantify evolution in the cluster-scale stellar mass–halo mass (SMHM) relation's parameters using 2323 clusters and brightest central galaxies (BCGs) over the redshift range 0.03 ≤ z ≤ 0.60. The precision on the inferred SMHM parameters is improved by including the magnitude gap (m gap ) between the BCG and fourth-brightest cluster member (M14) as a third parameter in the SMHM relation. At fixed halo mass, accounting for m gap , through a stretch parameter, reduces the SMHM relation's intrinsic scatter. To explore this redshift range, we use clusters, BCGs, and cluster members identified using the Sloan Digital Sky Survey C4 and redMaPPer cluster catalogs and the Dark Energy Survey redMaPPer catalog. Through this joint analysis, we detect no systematic differences in BCG stellar mass, m gap , and cluster mass (inferred from richness) between the data sets. We utilize the Pareto function to quantify each parameter's evolution. We confirm prior findings of negative evolution in the SMHM relation's slope (3.5σ), and detect negative evolution in the stretch parameter (4.0σ) and positive evolution in the offset parameter (5.8σ). This observed evolution, combined with the absence of BCG growth, when stellar mass is measured within 50 kpc, suggests that this evolution results from changes in the cluster's m gap . For this to occur, late-term growth must be in the intracluster light surrounding the BCG. We also compare the observed results to IllustrisTNG 300-1 cosmological hydrodynamic simulations and find modest qualitative agreement. However, the simulations lack the evolutionary features detected in the real data.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2024

Discovery and Characterization of Two Ultrafaint Dwarfs outside the Halo of the Milky Way: Leo M and Leo K

Abstract We report the discovery of two ultrafaint dwarf galaxies, Leo M and Leo K, that lie outside the halo of the Milky Way (MW). Using Hubble Space Telescope imaging of the resolved stars, we create color–magnitude diagrams reaching the oldest main-sequence turnoff of each system and (i) fit for structural parameters of the galaxies; (ii) measure their distances using the luminosity of the horizontal branch stars; (iii) estimate integrated magnitudes and stellar masses; and (iv) reconstruct the star formation histories. Based on their location in the Local Group, neither galaxy is currently within the halo of the MW although Leo K is located ∼26 kpc from the low-mass galaxy Leo T and these two systems may have had a past interaction. Leo M and Leo K have stellar masses of 1.8 − 0.2 + 0.3 × 10 4 M ⊙ and 1.2 ± 0.2 × 10 4 M ⊙ , and were quenched 10.6 − 1.1 + 2.2 Gyr and 12.8 − 4.2 + 0.1 Gyr ago, respectively. Given that the galaxies are at farther distances from the MW, it is unlikely that they were quenched by environmental processing. Instead, given their low stellar masses, their early quenching timescales are consistent with the scenario that a combination of reionization and stellar feedback shut down star formation at early cosmic times.

Astronomy & Astrophysics↗
DOE OSTI2025

The DECam MAGIC Survey: Spectroscopic Follow-up of the Most Metal-poor Stars in the Distant Milky Way Halo *

In this work, we present high-resolution spectroscopic observations for six metal-poor stars with [Fe/H] < –3 (including one with [Fe/H] < –4), selected using narrowband Ca ii HK photometry from the DECam MAGIC Survey. The spectroscopic data confirm the accuracy of the photometric metallicities and allow for the determination of chemical abundances for 16 elements, from carbon to barium. The program stars have chemical abundances consistent with the [Fe/H] < –3 range. A kinematic/dynamical analysis suggests that all program stars belong to the distant Milky Way halo population (heliocentric distances 35 < d helio /kpc ≲ 55), including three with high-energy orbits that might have been associated with the Magellanic system and one, J0026−5445, having parameters consistent with being a member of the Sagittarius stream. The remaining two stars show kinematics consistent with the Gaia-Sausage/Enceladus dwarf galaxy merger. J0433−5548, with [Fe/H] = –4.12, is a carbon-enhanced ultra metal-poor star, with [C/Fe] = +1.73. This star is believed to be a bona fide second-generation star, and its chemical abundance pattern was compared with yields from metal-free supernova models. Results suggest that J0433−5548 could have been formed from a gas cloud enriched by a single supernova explosion from an ∼11 M ⊙ star in the early Universe. The successful identification of such objects demonstrates the reliability of photometric metallicity estimates, which can be used for target selection and statistical studies of faint targets in the Milky Way and its satellite population. These discoveries illustrate the power of measuring chemical abundances of metal-poor Milky Way halo stars to learn more about early galaxy formation and evolution.

CEMP stars↗
DOE OSTI2023

Non-Virialized Axion Search Sensitive to Doppler Effects in the Milky Way Halo

The Axion Dark Matter eXperiment (ADMX) has previously excluded Dine-Fischler-Srednicki-Zhitnisky (DFSZ) axions between 680-790 MHz under the assumption that the dark matter is described by the isothermal halo model. However, the precise nature of the velocity distribution of dark matter is still unknown, and alternative models have been proposed. We report the results of a non-virialized axion search over the mass range 2.81-3.31 μeV, corresponding to the frequency range 680-800 MHz. This analysis marks the most sensitive search for non-virialized axions sensitive to Doppler effects in the Milky Way Halo to date. Accounting for frequency shifts due to the detector's motion through the Galaxy, we exclude cold flow relic axions with a velocity dispersion of order 10^-7 c with 95% confidence.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2026

A Chemodynamical Census of the Milky Way's Ultra-Faint Compact Satellites. I. A First Population-Level Look at the Internal Kinematics and Metallicities of 19 Extremely-Low-Mass Halo Stellar Systems

Deep, wide-area photometric surveys have uncovered a population of compact ($r_{1/2} \approx$ 1-15 pc), extremely-low-mass ($M_* \approx$ 20-4000 $M_{\odot}$) stellar systems in the Milky Way halo that are smaller in size than known ultra-faint dwarf galaxies (UFDs) and substantially fainter than most classical globular clusters (GCs). Very little is known about the nature and origins of this population of "Ultra-Faint Compact Satellites" (UFCSs) owing to a dearth of spectroscopic measurements. Here, we present the first spectroscopic census of these compact systems based on Magellan/IMACS and Keck/DEIMOS observations of 19 individual UFCSs, representing $\sim$2/3 of the known population. We securely measure mean radial velocities for all 19 systems, velocity dispersions for 15 (predominantly upper limits), metallicities for 17, metallicity dispersions for 8, and $\textit{Gaia}$-based mean proper motions for 18. This large new spectroscopic sample provides the first insights into population-level trends for these extreme satellites. We demonstrate that: (1) the UFCSs are kinematically colder, on average, than the UFDs, disfavoring very dense dark matter halos in most cases, (2) the UFCS population is chemically diverse, spanning a factor of $\sim$300 in mean iron abundance ($\rm -3.3 \lesssim [Fe/H] \lesssim -0.8$), with multiple systems falling beneath the "metallicity floor" proposed for GCs, and (3) while some higher-metallicity and/or younger UFCSs are clearly star clusters, the dynamical and/or chemical evidence allows the possibility that up to $\sim$50% of the UFCSs in our sample (9 of 19) may represent the smallest and least-massive galaxies yet discovered.

Cerny, William [Yale U.] (ORCID:0000000316977062)↗
DOE OSTI2023

Magellan/M2FS and MMT/Hectochelle Spectroscopy of Dwarf Galaxies and Faint Star Clusters within the Galactic Halo*

We present spectroscopic data for 16,369 stellar targets within and/or toward 38 dwarf spheroidal galaxies and faint star clusters within the Milky Way halo environment. All spectra come from observations with the multiobject, fiber-fed echelle spectrographs M2FS at the Magellan/Clay telescope or Hectochelle at the MMT, reaching a typical limiting magnitude G ≲ 21. Data products include processed spectra from all observations and catalogs listing estimates—derived from template model fitting—of line-of-sight velocity (median uncertainty 1.4 km s –1 ) effective temperature (255 K), (base-10 logarithm of) surface gravity (0.59 dex in cgs units), [Fe/H] (0.4 dex) and [Mg/Fe] (0.27 dex) abundance ratios. The sample contains multiepoch measurements for 3720 sources, with up to 15 epochs per source, enabling studies of intrinsic spectroscopic variability. The sample contains 6087 likely red giant stars (based on surface gravity), and 4492 likely members (based on line-of-sight velocity and Gaia-measured proper motion) of the target systems. The number of member stars per individual target system ranges from a few, for the faintest systems, to ~850 for the most luminous. For most systems, our new samples extend over wider fields than have previously been observed; of the likely members in our samples, 820 lie beyond 2 times the projected half-light radius of their host system, and 42 lie beyond 5 R half .

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2022

Evidence from Disrupted Halo Dwarfs that r-process Enrichment via Neutron Star Mergers is Delayed by ≳500 Myr

The astrophysical origins of r-process elements remain elusive. Neutron star mergers (NSMs) and special classes of core-collapse supernovae (rCCSNe) are leading candidates. Due to these channels' distinct characteristic timescales (rCCSNe: prompt, NSMs: delayed), measuring r-process enrichment in galaxies of similar mass but differing star formation durations might prove informative. Two recently discovered disrupted dwarfs in the Milky Way's stellar halo, Kraken and Gaia-Sausage Enceladus (GSE), afford precisely this opportunity: Both have M * ≈ 10 8 M ⊙ but differing star formation durations of ≈2 Gyr and ≈3.6 Gyr. Here we present R ≈ 50,000 Magellan/MIKE spectroscopy for 31 stars from these systems, detecting the r-process element Eu in all stars. Stars from both systems have similar [Mg/H] ≈ -1, but Kraken has a median [Eu/Mg] ≈ -0.1 while GSE has an elevated [Eu/Mg] ≈ 0.2. With simple models, we argue NSM enrichment must be delayed by 500–1000 Myr to produce this difference. rCCSNe must also contribute, especially at early epochs, otherwise stars formed during the delay period would be Eu free. In this picture, rCCSNe account for ≈50% of the Eu in Kraken, ≈25% in GSE, and ≈15% in dwarfs with extended star formation durations like Sagittarius. The inferred delay time for NSM enrichment is 10×–100× longer than merger delay times from stellar population synthesis—this is not necessarily surprising because the enrichment delay includes time taken for NSM ejecta to be incorporated into subsequent generations of stars. For example, this may be due to natal kicks that result in r-enriched material deposited far from star-forming gas, which then takes ≈10 8 –10 9 yr to cool in these galaxies.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2024

Constraining Galaxy-Halo connection using machine learning

We investigate the potential of machine learning (ML) methods to model small-scale galaxy clustering for constraining Halo Occupation Distribution (HOD) parameters. Our analysis reveals that while many ML algorithms report good statistical fits, they often yield likelihood contours that are significantly biased in both mean values and variances relative to the true model parameters. This highlights the importance of careful data processing and algorithm selection in ML applications for galaxy clustering, as even seemingly robust methods can lead to biased results if not applied correctly. ML tools offer a promising approach to exploring the HOD parameter space with significantly reduced computational costs compared to traditional brute-force methods if their robustness is established. Using our ANN-based pipeline, we successfully recreate some standard results from recent literature. Properly restricting the HOD parameter space, transforming the training data, and carefully selecting ML algorithms are essential for achieving unbiased and robust predictions. Among the methods tested, artificial neural networks (ANNs) outperform random forests (RF) and ridge regression in predicting clustering statistics, when the HOD prior space is appropriately restricted. We demonstrate these findings using the projected two-point correlation function (w p (r p )), angular multipoles of the correlation function (ξ ℓ (r)), and the void probability function (VPF) of Luminous Red Galaxies from Dark Energy Spectroscopic Instrument mocks. Our results show that while combining w p (r p ) and VPF improves parameter constraints, adding the multipoles ξ 0 , ξ 2 , and ξ 4 to w p (r p ) does not significantly improve the constraints.

cosmology↗
DOE OSTI2023

Photometric metallicity for 694 233 Galactic giant stars from Gaia DR3 synthetic Strömgren photometry: Metallicity distribution functions of halo substructures

We used two previous calibrations and the standardised synthetic photometry in the v, b, and y Strömgren passbands from Gaia DR3 BP/RP spectra to obtain photometric metallicities for a selected sample of 694 233 old Galactic giant stars having |b|> 20.0° and parallax uncertainties lower than 10%. The zero point of both sets of photometric metallicities has been shifted to ensure an optimal match with the spectroscopic [Fe/H] values for 44 785 stars in common with APOGEE DR17, focusing on the metallicity range where they provide the highest accuracy. The metallicities derived in this way from one calibration display a typical accuracy of ≲0.1 dex and 1σ precision ≲0.2 dex in the range -2.2 ≲ [Fe/H] ≲ - 0.4, while they show a systematic trend with [Fe/H] at higher metallicity, beyond the applicability range of the relation. Those derived from the other calibration display, in general, reduced precision, and lower accuracy in the metal-poor regime, but have a median accuracy < 0.05 dex for [Fe/H] ≥ - 0.8. These results are confirmed and, consequently, the metallicities are validated, by comparison with large sets of spectroscopic metallicities from various surveys. The newly obtained metallicities are used to derive metallicity distributions for several previously identified substructures in the Galactic halo with an unprecedented number of stars. The catalogue including the two sets of metallicities and the associated uncertainties is made publicly available.

79 ASTRONOMY AND ASTROPHYSICS↗