Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “gravity field mapping”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14

Editorial: Understanding the Causes of Asymmetries in Earth’S Magnetosphere-Ionosphere System

Geomagnetic activity observed in geospace, the upper atmosphere, and on the ground results from solar-terrestrial interactions. Such interactions correspond to the coupling between the solar wind, magnetosphere, and the thermosphere-ionosphere (MIT) system (Khazanov, 2016). However, given the complexity of the whole system and its large spatial scale and long-term solar variability, effects resulting from this coupling can be asymmetric. For example, inter-hemispherical asymmetric responses can arise when a hemisphere receives more energy than the other (e.g., Knipp et al., 2021; Pakhotin et al., 2021), local time effects can take place due to the occurrence of intense dawn-dusk interplanetary electric fields (e.g.,Haaland et al., 2017), and asymmetric geomagnetic field and mapping are caused by the Earth’s dipole offset and tilt (e.g., Laundal et al., 2017). The drivers that generate asymmetric MIT coupling response are generally recognized as long term: solar activity (Zhang et al., 2022) and dipole offset and tilt (Laundal et al., 2017); middle term: seasons (Lu et al., 2010); and short term: the y and z components of the interplanetary magnetic field (IMF) (Cowley, 1981; Li et al., 2011; Knipp et al., 2021). Thermospheric neutral mass density can present local time asymmetries associated with IMF By (Forster et al., 2017), and inter-hemispheric asymmetries can be generated by cross-hemispheric propagation of large-scale gravity waves (Bruinsma and Forbes, 2007). In addition, forcing from the mesosphere and lower thermosphere can generate inter-hemispheric neutral wind asymmetric patterns that can in turn asymmetrically impact neutral density in different hemispheres (Stober et al., 2021).

magnetosphere-ionophere coupling↗

Spherical harmonic expansions of the Earth's gravitational potential to degree 360 using 30' mean anomalies

Two potential coefficient fields that are complete to degree and order 360 have been computed. One field (OSU86E) excludes geophysically predicted anomalies while the other (OSU86F) includes such anomalies. These fields were computed using a set of 30' mean gravity anomalies derived from satellite altimetry in the ocean areas and from land measurements in North America, Europe, Australia, Japan and a few other areas. Where no 30' data existed, 1 deg x 1 deg mean anomaly estimates were used if available. No rigorous combination of satellite and terrestrial data was carried out. Instead advantage was taken of the adjusted anomalies and potential coefficients from a rigorous combination of the GEML2' potential coefficient set and 1 deg x 1 deg mean gravity anomalies. The two new fields were computed using a quadrature procedure with de-smoothing factors. The spectra of the new fields agree well with the spectra of the fields with 1 deg x 1 deg data out to degree 180. Above degree 180 the new fields have more power. The fields have been tested through comparison of Doppler station geoid undulations with undulations from various geopotential models. The agreement between the two types of undulations is approximately + or - 1.6 m. The use of a 360 field over a 180 field does not significantly improve the comparison. Instead it allows the comparison to be done at some stations where high frequency effects are important. In addition maps made in areas of high frequency information (such as trench areas) clearly reveal the signal in the new fields from degree 181 to 360.

Rapp, Richard H.↗

Petrologic model of the northern Mississippi embayment based on satellite magnetic and ground based geophysical data

Magnetization, derived from gravity-seismic data from the northern Mississippi Embayment, is evaluated relative to magnetization values obtained from satellite magnetic data. A magnetization contrast of approximately -0.54 A/m determined from the geophysical model compares favorably to a value of approximately -0.47 A/m from MAGSAT United States Apparent Magnetization contrast map. The negative magnetization contrast, required by the MAGSAT data, is unusual as rift zones with the exception of those which are currently active are associated with positive magnetization. The model presented favors an intrusion of low Curie temperature mafic rock at the base of the crust. Alternate possibilities, a shallow Curie isotherm or remanence in a direction other than that of the current main field, seem less likely as reported regional heat flow values are too low and remanence is attenuated at depth.

Thomas, H. H.↗

Flow visualization and quantitative velocity and pressure measurements in simulated single and double brush seals

A method to visualize and characterize the complex flow fields in simulated single and double brush seals is presented. The brush seal configuration was tested in a gravity fed water tunnel and a pump driven pressurized oil tunnel. Visualization of the flow field revealed regions that are characteristically river jetting, vortical, crossflow and exist upstream, downstream or within the seal. Such flows are especially engendered by variations in fiber void that are spatial and temporal and affect changes in seal leakage and stability. While the effects of interface motion and cylindrical configuration have not been considered herein, it is believed that the observed flow fields and pressure drop patterns characterize flow phenomenology in brush seals. The axial pressure profiles upstream, across and downstream of the brush have been measured under a variety of inlet pressure conditions and the ensuing pressure maps are presented and discussed. Through the application of the Full Flow Field Tracking method developed by the authors, the flow patterns and the accompanying fluid velocities inside the brush were non-intrusively determined and graphically reconstructed.

Braun, M. J.↗

NASA Omics Archive Project

The space environment consists of a complex set of hazards including altered gravity, radiation, psychological/physiological stress, isolation, and confinement leading to complex biological responses. Advances in biotechnology capabilities offer considerable potential to provide novel insight into those responses as well as innovative diagnostic, treatment, and countermeasure solutions for astronauts as NASA begins to travel beyond low Earth orbit. Omics data (genomics, transcriptomics, proteomics, etc.) is one example that can provide NASA with critical knowledge of how a crewmember’s genetics, environment, and lifestyle can be used to develop individualized approaches for disease prevention, advance diagnostics, and improve treatment strategies. NASA ventured into the field of omics on human subjects with the successful completion of the NASA Twins Study which was the first step in mapping the multi-omic profile of astronauts to understand and mitigate the health consequences of spaceflight. The Human Research Program aims to build upon the success of the Twins Study with the NASA Omics Archive flight study, establishing a longitudinal biospecimen archive and efficiently generating a comprehensive high-quality multi-omic dataset from astronauts for the purpose of studying molecular, metabolic, and microbial changes associated with longduration spaceflight missions. The goal is to facilitate scientific and medical research community efforts to characterize and mitigate spaceflight health and performance risks. In this presentation, we will review details regarding the biospecimen and data archive to be generated by the NASA Omics Archive flight study. Data generated as part of this project will be archived in the NASA Life Sciences Portal (NLSP) and be made available for future hypothesis-driven research efforts or occupational surveillance through Institutional Review Board-approved data sharing and retrospective data requests submitted to the Life Sciences Data Archive (LSDA) team. We will also present results of a ground study performed to evaluate in-house procedures, new sample collection hardware, and vendor capabilities. The data repository generated and the samples to be archived by this study will enable future research efforts to assess an astronauts’ unique molecular and genetic profile with respect to individual spaceflight responses. Results of which will be instrumental in enabling precision health capabilities to better assess and mitigate spaceflight risks, detect disease states earlier, and actively monitor countermeasure treatments, ultimately improving clinical outcomes during future exploration class missions.

C. A. Theriot↗

Analyzing Martian winds and tracer concentrations using Mars Observer data

During the courses of a day, the Mars Observer spacecraft will acquire globally distributed profiles of the martian atmosphere. It is highly desirable that this data be assembled into synoptic weather maps (complete specifications of the atmospheric pressure, temperature, and winds at a given time), which can in turn be used as starting points in the study of many meteorological phenomena. Unfortunately, the special nature of the Mars Observer data presents several challenges above and beyond the usual difficult problem of data initialization. Mars Observer atmospheric data will consist almost exclusively of asynoptic vertical profiles of temperatures (or radiances) and pressures, whereas winds are generally in balance with horizontal gradients of these quantities (which will not be observed). It will therefore be necessary to resort to dynamical models to analyze the wind fields. As a rule, data assimilation into atmospheric models can result in the generation of spurious gravity waves, so special steps must be taken to suppress these. In addition, the asynoptic nature of the data will require a four-dimensional (space and time) data assimilation scheme. The problem is to find a full set of meteorological fields (winds and temperatures) such that, when marched forward in time in the model, they achieve a best fit (in the weighted least-squares sense) to the data. The proposed solution is to develop a model especially for the Mars Observer data assimilation problem. Gravity waves are filtered from the model by eliminating all divergence terms from the prognostic divergence equation. This leaves a diagnostic gradient wind relation between the rotational wind and the temperature field. The divergent wind is diagnosed as the wind required to maintain the gradient wind balance in the presence of the diabatic heating. The primitive equations of atmospheric dynamics (with three principal dependent variables) are thus reduced to a simpler system with a single prognostic equation for temperature - the variable that will be best observed. (This balance system was apparently first derived by Charney as a first-order Rossby number expansion of the equations of motion). Experience with a full primitive equation model of the martian atmosphere indicates that a further simplification is possible: at least for short-term integrations, the model can be linearized about the zonally symmetric basic state.

Houben, Howard C.↗

Precise Orbit Determination for GEOSAT Follow-On Using Satellite Laser Ranging Data and Intermission Altimeter Crossovers

The U.S. Navy's GEOSAT Follow-On Spacecraft was launched on February 10, 1998 and the primary objective of the mission was to map the oceans using a radar altimeter. Following an extensive set of calibration campaigns in 1999 and 2000, the US Navy formally accepted delivery of the satellite on November 29, 2000. The spacecraft is tracked by satellite laser ranging (SLR) and Doppler (Tranet-style) beacons. Although a limited amount of GPS data were obtained, the primary mode of tracking remains satellite laser ranging. In this paper, we report on progress in orbit determination for GFO using GFO/GFO and TOPEX/GFO altimeter crossovers. We have tuned the nonconservative force model for GFO and the gravity model using SLR, Doppler and altimeter crossover data spanning over one year. Preliminary results show that the predicted radial orbit error from the gravity field covariance to 70x70 on GEOSAT was reduced from 2.6 cm in EGM96 to 1.9 cm with the addition of only five months of the GFO SLR and GFO/GFO crossover data. Further progress is possible with the addition of more data, particularly the TOPEX/GFO crossovers. We will evaluate the tuned GFO gravity model (a derivative of EGM96) using altimeter data from the GEOSAT mission. In January 2000, a limited quantity of GPS data were obtained. We will use these GPS data in conjunction with the SLR and altimeter crossover data obtained over the same time span to compute quasi-reduced dynamic orbits which will also aid in the evaluation of the tuned GFO geopotential model.

Lemoine, F. G.↗

Performance of FFT methods in local gravity field modelling

Fast Fourier transform (FFT) methods provide a fast and efficient means of processing large amounts of gravity or geoid data in local gravity field modelling. The FFT methods, however, has a number of theoretical and practical limitations, especially the use of flat-earth approximation, and the requirements for gridded data. In spite of this the method often yields excellent results in practice when compared to other more rigorous (and computationally expensive) methods, such as least-squares collocation. The good performance of the FFT methods illustrate that the theoretical approximations are offset by the capability of taking into account more data in larger areas, especially important for geoid predictions. For best results good data gridding algorithms are essential. In practice truncated collocation approaches may be used. For large areas at high latitudes the gridding must be done using suitable map projections such as UTM, to avoid trivial errors caused by the meridian convergence. The FFT methods are compared to ground truth data in New Mexico (xi, eta from delta g), Scandinavia (N from delta g, the geoid fits to 15 cm over 2000 km), and areas of the Atlantic (delta g from satellite altimetry using Wiener filtering). In all cases the FFT methods yields results comparable or superior to other methods.

Forsberg, Rene↗

Gravity Recovery and Interior Laboratory Mission (GRAIL) Orbit Determination

Launched on 10 September 2011 from the Cape Canaveral Air Force Station, Florida, the twin-spacecraft Gravity Recovery and Interior Laboratory (GRAIL) has the primary mission objective of generating a lunar gravity map with an unprecedented resolution via the Ka-band Lunar Gravity Ranging System (LGRS). After successfully executing nearly 30 maneuvers on their six-month journey, Ebb and Flow (aka GRAIL-A and GRAIL-B) established the most stringent planetary formation orbit on 1 March 2012 of approximately 30 km x 90 km in orbit size. This paper describes the orbit determination (OD) filter configurations, analyses, and results during the Trans-Lunar Cruise, Orbit Period Reduction, and Transition to Science Formation phases. The maneuver reconstruction strategies and their performance will also be discussed, as well as the navigation requirements, major dynamic models, and navigation challenges. GRAIL is the first mission to generate a full high-resolution gravity field of the only natural satellite of the Earth. It not only enables scientists to understand the detailed structure of the Moon but also further extends their knowledge of the evolutionary histories of the rocky inner planets. Robust and successful navigation was the key to making this a reality.

Orbit Period Reduction (OPR)↗

Contribution to the Study of Regional Magnetization of Satellite Magnetic Measurement: Magsat, Orsted, and Champ (with Gravity Field)

A discussion of and introduction to satellite-altitude geopotential field studies and their interpretation with emphasis on results from metalliferous regions will be given. The magnetic and gravimetric measurements from satellite altitudes show heterogeneity in deeper parts of the lithosphere. These patterns of magnetic anomalies do not only reveal the largest iron ore deposits such as Kiruna, Sweden, Kursk, Russia, and Banugi, Central African Republic but also linear features indicating structural discontinuities. Changes of magnetic amplitude of these patterns are caused by intersecting transverse fractures localizing magmatism and concentration of metals. In addition satellite altitude data are related to variations in crustal thickness and heat flow. Deep-rooted structural discontinuities, defined by combination of geological and geophysical criteria, with spacing of several hundred kilometers, reveal a quite uniform pattern in the deeper parts of the lithosphere. As these structures provide favorable pathways for the ascent of heat, magmas and ore-forming fluids, their recognition is of crucial importance and can be used in the compilation of a new type of mineral prognosis map. An example from Europe includes a pattern of east west trending structural discontinuities or belts and their junction with the NW-trending Tornqvist-Teisseyre Line. The Upper Silesian-Cracovian Zn-Pb district occurs along one of the latitudinal belts. Leslaw Teper of the University of Silesia has been invited to show the fractures in crystalline basement beneath the sediments hosting the Zn-Pb ores.

Taylor, Patrick T.↗

New Mars free-air and Bouguer gravity: Correlation with topography, geology and large impact basins

Free-air and Bouguer gravity anomalies from a 50x50 field (MGM635), derived at the Goddard Space Flight Center, with global topography, geology, and the distribution of large impact basins was compared. The free-air gravity anomalies were derived from re-analysis of Viking Orbiter and Mariner 9 tracking data and have a spatial resolution of 250-300 km. Bouguer anomalies were calculated using a 50x50 expansion of the current Mars topography and the GSFC degree 50 geoid as the equipotential reference surface. Rotational flattening was removed using a moment of inertia of 0.365 and the corrections from Table B2 of Sleep and Phillips. Crustal density and mean density were assumed to be 2.9 and 3.93 gm/cm(sup 3). The spherical harmonic topography used has zero mean elevation, and differs from the USGS maps by about 2 km. Comparisons with global geology use a simplified map with about 1/3 the number of units on the current maps. For correlation with impact basins, the recent compilation by Schultz and Frey was used.

Frey, Herbert↗

Experiment S-213 selenocentric geodetic reference system

Development and implementation of a photogrammetric system was undertaken to provide accurate selenodetic positions and topographic mapping of all areas overflown by orbital spacecraft. The system was installed in the scientific instrument module (SIM) bay of the Apollo command service module (CSM). In theory, this system provided everything a photogrammetrist could want: the position of each exposure station would be obtained from Earth-based tracking; the orientation of each photograph could be computed from the synchronized stellar exposure and the lock-angles determined by preflight calibration; and the scale of each stereomodel would be obtained directly from the altimeter data. Operationally, the data acquisition was adequate, but less than optimum. Systematic errors are believed to be the result of the primitive orbit determination procedures in use at the time of the Apollo 15 mission, inadequate models of the lunar gravity field, and spacecraft oscillations induced by uncoupled thrusting and various activities of the astronauts.

Doyle, F. J.↗

New results and techniques in space radio astronomy.

The methods and results of early space radioastronomy experiments are reviewed, with emphasis on the RAE 1 spacecraft which was designed specifically and exclusively for radio astronomical studies. The RAE 1 carries two gravity-gradient-stabilized 229-m traveling-wave V-antennas, a 37-m dipole antenna, and a number of radiometer systems to provide measurements over the 0.2 to 9.2 MHz frequency range with a time resolution of 0.5 sec and an absolute accuracy of plus or minus 25%. Observations of solar bursts at frequencies down to 0.2 MHz provide new information on the density, plasma velocity, and dynamics of coronal streamers out to distances greater than 50 solar radii. New information on the distribution of the ionized component of the interstellar medium is being obtained from galactic continuum background maps at frequencies around 4 MHz. Cosmic noise background spectra measured down to 0.5 MHz produce new estimates on the interstellar flux of cosmic rays, on magnetic fields in the galactic halo, and on distant extragalactic radio sources.

Alexander, J. K.↗

A Determination of the Precession and Rotation-Rate of Mars from Tracking and Altimetry Data

The doppler tracking of the MGS spacecraft and the laser altimetry acquired by the MOLA instrument on MGS have been used to measure the rotation of Mars. By observing the repeating pattern of gravity anomalies and the topography the direction of the rotation axis in both inertial space and body fixed coordinates, and the rate of rotation of the planet on its axis have been derived. The tracking of MGS in orbit about Mars by stations on Earth permit the orbit of MGS to be obtained in an inertial coordinate system enabling the periodic perturbation of the MGS orbit by Mars' gravity field to be used as a sensor to detect the vector rotation of Mars under the orbit of MGS. The altimetry data acquired by MOLA on MGS permit the topography to help define the orbit of MGS about Mars in a body fixed coordinate system thus enabling the pole of rotation of the planet to be determined in a coordinate system defined by the altimetry. Together they enable the precession of the rotation axis to be observed from which the moment of inertia can be derived, changes in length of day to be measured, and a method to check for possible Mars polar motion. Tracking data on the Mariner 9, Viking 1 and 2, from the 1970's have been analyzed with MGS data obtained in the mapping orbit in 1999 to provide a new estimate of the moment of inertia.

Smith, David E.↗

Gravity anomaly detection: Apollo/Soyuz

The Goddard Apollo-Soyuz Geodynamics Experiment is described. It was performed to demonstrate the feasibility of tracking and recovering high frequency components of the earth's gravity field by utilizing a synchronous orbiting tracking station such as ATS-6. Gravity anomalies of 5 MGLS or larger having wavelengths of 300 to 1000 kilometers on the earth's surface are important for geologic studies of the upper layers of the earth's crust. Short wavelength Earth's gravity anomalies were detected from space. Two prime areas of data collection were selected for the experiment: (1) the center of the African continent and (2) the Indian Ocean Depression centered at 5% north latitude and 75% east longitude. Preliminary results show that the detectability objective of the experiment was met in both areas as well as at several additional anomalous areas around the globe. Gravity anomalies of the Karakoram and Himalayan mountain ranges, ocean trenches, as well as the Diamantina Depth, can be seen. Maps outlining the anomalies discovered are shown.

Vonbun, F. O.↗

Terrestrial Water Mass Load Changes from Gravity Recovery and Climate Experiment (GRACE)

Recent studies show that data from the Gravity Recovery and Climate Experiment (GRACE) is promising for basin- to global-scale water cycle research. This study provides varied assessments of errors associated with GRACE water storage estimates. Thirteen monthly GRACE gravity solutions from August 2002 to December 2004 are examined, along with synthesized GRACE gravity fields for the same period that incorporate simulated errors. The synthetic GRACE fields are calculated using numerical climate models and GRACE internal error estimates. We consider the influence of measurement noise, spatial leakage error, and atmospheric and ocean dealiasing (AOD) model error as the major contributors to the error budget. Leakage error arises from the limited range of GRACE spherical harmonics not corrupted by noise. AOD model error is due to imperfect correction for atmosphere and ocean mass redistribution applied during GRACE processing. Four methods of forming water storage estimates from GRACE spherical harmonics (four different basin filters) are applied to both GRACE and synthetic data. Two basin filters use Gaussian smoothing, and the other two are dynamic basin filters which use knowledge of geographical locations where water storage variations are expected. Global maps of measurement noise, leakage error, and AOD model errors are estimated for each basin filter. Dynamic basin filters yield the smallest errors and highest signal-to-noise ratio. Within 12 selected basins, GRACE and synthetic data show similar amplitudes of water storage change. Using 53 river basins, covering most of Earth's land surface excluding Antarctica and Greenland, we document how error changes with basin size, latitude, and shape. Leakage error is most affected by basin size and latitude, and AOD model error is most dependent on basin latitude.

Seo, K.-W.↗

Topography of the Moon from the Clementine Lidar

Range measurements from the lidar instrument carried aboard the Clementine spacecraft have been used to produce an accurate global topographic model of the Moon. This paper discusses the function of the lidar; the acquisition, processing, and filtering of observations to produce a global topographic model; and the determination of parameters that define the fundamental shape of the Moon. Our topographic model: a 72nd degree and order spherical harmonic expansion of lunar radii, is designated Goddard Lunar Topography Model 2 (GLTM 2). This topographic field has an absolute vertical accuracy of approximately 100 m and a spatial resolution of 2.5 deg. The field shows that the Moon can be described as a sphere with maximum positive and negative deviations of approx. 8 km, both occurring on the farside, in the areas of the Korolev and South Pole-Aitken (S.P.-Aitken) basins. The amplitude spectrum of the topography shows more power at longer wavelengths as compared to previous models, owing to more complete sampling of the surface, particularly the farside. A comparison of elevations derived from the Clementine lidar to control point elevations from the Apollo laser altimeters indicates that measured relative topographic heights generally agree to within approx. 200 in over the maria. While the major axis of the lunar gravity field is aligned in the Earth-Moon direction, the major axis of topography is displaced from this line by approximately 10 deg to the cast and intersects the farside 24 deg north of the equator. The magnitude of impact basin topography is greater than the lunar flattening (approx. 2 km) and equatorial ellipticity (approx. 800 m), which imposes a significant challenge to interpreting the lunar figure. The floors of mare basins are shown to lie close to an equipotential surface, while the floors of unflooded large basins, except for S.P.-Aitken, lie above this equipotential. The radii of basin floors are thus consistent with a hydrostatic mechanism for the absence of significant farside maria except for S.P.-Aitken, whose depth and lack of mare require significant internal compositional and/or thermal heterogeneity. A macroscale surface roughness map shows that roughness at length scales of 10(exp 1) - 10(exp 2) km correlates with elevation and surface age.

Smith, David E.↗

Precise Orbit Determination for GEOSAT Follow-On Using Satellite Laser Ranging Data and Intermission Altimeter Crossovers

The US Navy's GEOSAT Follow-On Spacecraft was launched on February 10, 1998 with the primary objective of the mission to map the oceans using a radar altimeter. Following an extensive set of calibration campaigns in 1999 and 2000, the US Navy formally accepted delivery of the satellite on November 29, 2000. Satellite laser ranging (SLR) and Doppler (Tranet-style) beacons track the spacecraft. Although limited amounts of GPS data were obtained, the primary mode of tracking remains satellite laser ranging. The GFO altimeter measurements are highly precise, with orbit error the largest component in the error budget. We have tuned the non-conservative force model for GFO and the gravity model using SLR, Doppler and altimeter crossover data sampled over one year. Gravity covariance projections to 70x70 show the radial orbit error on GEOSAT was reduced from 2.6 cm in EGM96 to 1.3 cm with the addition of SLR, GFO/GFO and TOPEX/GFO crossover data. Evaluation of the gravity fields using SLR and crossover data support the covariance projections and also show a dramatic reduction in geographically-correlated error for the tuned fields. In this paper, we report on progress in orbit determination for GFO using GFO/GFO and TOPEX/GFO altimeter crossovers. We will discuss improvements in satellite force modeling and orbit determination strategy, which allows reduction in GFO radial orbit error from 10-15 cm to better than 5 cm.

Lemoine, Frank G.↗