Results for “globalization techniques” — Page 14

NASA NTRS1990

Technique for assessing vegetation-induced moisture flux, with implications for global climate modeling

The time between storms, the duration of storms, and the storm depths are studied in relation to vegetation controls on the disposition of rainfall. It is proposed that understanding the movement of water between the vegetation and soil (including evapotranspiration and infiltration) will be the gateway for modeling atmospheric flux and improving global climate models. The overall objective goal of the proposed research effort is to develop a field/lab methodology which will provide a better understanding of vegetation induced water movement. Water flow initiated from stem flow of wooded slopes feeds soil water pathways, which in turn feed the deeper ground water system and give rise to stream response. This is balanced by more water inputs via throughfall, where it percolates the soil matrix and allows much greater rates of evapotranspiration and atmospheric/soil moisture flux. This research study seeks to gain an understanding of the effect of vegetation on soil moisture, and the effect of this differential wetting on resulting evapotranspiration and atmospheric flux.

Macari, Emir Jose↗

NASA NTRS1991

Ultrasonic evaluation of oxidation and reduction effects on the elastic behavior and global microstructure of YBa2Cu3O7-x

Ultrasonic velocity measurement techniques were used to evaluate the effects of oxidation and reduction on the elastic properties, global microstructure and oxygen content of the YBa2Cu3O(7-x) ceramic superconductor for samples ranging from 70 to 90 pct. of theoretical density. Bulk density, velocity, and elastic modulus generally increased with increasing oxygen content upon oxidation, and this behavior was reversible. Velocity image patterns were similar after oxidation and reduction treatments for a 90 pct. dense sample, although the velocity value at any given point on the sample was changed following the treatments. The unchanging pattern correlated with destructive measurements showing that the spatial pore distribution (fraction and size) was not measurably altered after the treatments. Changes in superconducting behavior, crystal structure, and grain structure were observed consistent with changes in oxygen content.

Roth, Don J.↗

NASA NTRS1990

Spectroscopic analysis of global tide gauge sea level data

Yearly and monthly global tide-gage sea-level data are fitted to numerically generated tidal data in order to search for the 18.6-yr lunar nodal tide and 14-month pole tide. Both of these tides are clearly evident, with amplitudes and phases that are consistent with a global equilibrium response. The ocean's response to atmospheric pressure is studied with the least-squares fit technique. Consideration is given to the global rise in sea level, the effects of postglacial rebound, and the possible causes of the enhanced pole tides in the North Sea, the Baltic Sea, and the Gulf of Bothnia. The results support O'Connor's (1986) suggestion that the enhanced pole tide in these regions is due to meteorological forcing rather than a basin-scale resonance. Also, the global average of the tide-gage data show an increase in sea level over tha last 80 yr of between 1.1 and 1.9 mm/yr.

Trupin, A.↗

NASA NTRS1992

Analysis of crustal structure of Venus utilizing residual Line-of-Sight (LOS) gravity acceleration and surface topography data. A trial of global modeling of Venus gravity field using harmonic spline method

To construct Venus' gravity disturbance field (or gravity anomaly) with the spacecraft-observer line of site (LOS) acceleration perturbation data, both a global and a local approach can be used. The global approach, e.g., spherical harmonic coefficients, and the local approach, e.g., the integral operator method, based on geodetic techniques are generally not the same, so that they must be used separately for mapping long wavelength features and short wavelength features. Harmonic spline, as an interpolation and extrapolation technique, is intrinsically flexible to both global and local mapping of a potential field. Theoretically, it preserves the information of the potential field up to the bound by sampling theorem regardless of whether it is global or local mapping, and is never bothered with truncation errors. The improvement of harmonic spline methodology for global mapping is reported. New basis functions, a singular value decomposition (SVD) based modification to Parker & Shure's numerical procedure, and preliminary results are presented.

Fang, Ming↗

NASA NTRS1988

Global meteorological data facility for real-time field experiments support and guidance

A Global Meteorological Data Facility (GMDF) has been constructed to provide economical real-time meteorological support to atmospheric field experiments. After collection and analysis of meteorological data sets at a central station, tailored meteorological products are transmitted to experiment field sites using conventional ground link or satellite communication techniques. The GMDF supported the Global Tropospheric Experiment Amazon Boundary Layer Experiment (GTE-ABLE II) based in Manaus, Brazil, during July and August 1985; an arctic airborne lidar survey mission for the Polar Stratospheric Clouds (PSC) experiment during January 1986; and the Genesis of Atlantic Lows Experiment (GALE) during January, February and March 1986. GMDF structure is similar to the UNIDATA concept, including meteorological data from the Zephyr Weather Transmission Service, a mode AAA GOES downlink, and dedicated processors for image manipulation, transmission and display. The GMDF improved field experiment operations in general, with the greatest benefits arising from the ability to communicate with field personnel in real time.

Shipham, Mark C.↗

NASA NTRS1998

Lidar Measurements of Tropospheric Wind Profiles with the Double Edge Technique

Research has established the importance of global tropospheric wind measurements for large scale improvements in numerical weather prediction. In addition, global wind measurements provide data that are fundamental to the understanding and prediction of global climate change. These tasks are closely linked with the goals of the NASA Earth Science Enterprise and Global Climate Change programs. NASA Goddard has been actively involved in the development of direct detection Doppler lidar methods and technologies to meet the wind observing needs of the atmospheric science community. A variety of direct detection Doppler wind lidar measurements have recently been reported indicating the growing interest in this area. Our program at Goddard has concentrated on the development of the edge technique for lidar wind measurements. Implementations of the edge technique using either the aerosol or molecular backscatter for the Doppler wind measurement have been described. The basic principles have been verified in lab and atmospheric lidar wind experiments. The lidar measurements were obtained with an aerosol edge technique lidar operating at 1064 nm. These measurements demonstrated high spatial resolution (22 m) and high velocity sensitivity (rms variances of 0.1 m/s) in the planetary boundary layer (PBL). The aerosol backscatter is typically high in the PBL and the effects of the molecular backscatter can often be neglected. However, as was discussed in the original edge technique paper, the molecular contribution to the signal is significant above the boundary layer and a correction for the effects of molecular backscatter is required to make wind measurements. In addition, the molecular signal is a dominant source of noise in regions where the molecular to aerosol ratio is large since the energy monitor channel used in the single edge technique measures the sum of the aerosol and molecular signals. To extend the operation of the edge technique into the free troposphere we have developed a variation of the edge technique called the double edge technique. In this paper a ground based aerosol double edge lidar is described and the first measurements of wind profiles in the free troposphere obtained with this lidar will be presented.

Gentry, Bruce M.↗

NASA NTRS1985

On the Solution of the Three-Dimensional Flowfield About a Flow-Through Nacelle

The solution of the three dimensional flow field for a flow through nacelle was studied. Both inviscid and viscous inviscid interacting solutions were examined. Inviscid solutions were obtained with two different computational procedures for solving the three dimensional Euler equations. The first procedure employs an alternating direction implicit numerical algorithm, and required the development of a complete computational model for the nacelle problem. The second computational technique employs a fourth order Runge-Kutta numerical algorithm which was modified to fit the nacelle problem. Viscous effects on the flow field were evaluated with a viscous inviscid interacting computational model. This model was constructed by coupling the explicit Euler solution procedure with a flag entrainment boundary layer solution procedure in a global iteration scheme. The computational techniques were used to compute the flow field for a long duct turbofan engine nacelle at free stream Mach numbers of 0.80 and 0.94 and angles of attack of 0 and 4 deg.

Compton, William Bernard↗

NASA NTRSDate not supplied

Climatology of Global Precipitation Measurement Mission Precipitation Regimes and Implications for Global Estimates of Vertical Winds

The Global Precipitation Measurement (GPM) mission Validation Network (VN) framework leverages over 118 ground-based polarimetric Doppler radars to validate a large subset of precipitation measurements and retrievals from the GPM Dual-frequency Precipitation Radar (DPR). Recently, GPM DPR reflectivity profiles within the VN have been classified according to their convective regime using unsupervised machine learning techniques. The archetypal regimes are stratiform, convective, mixed stratiform-convective (e.g., transition regions), and “other” (e.g., peripheral regions of light precipitation). Subcategories within these four primary regimes vary according to the characteristic depth of included reflectivity profiles, resulting in 12 main GPM DPR precipitation profile categories. Polarimetry of ground-based Doppler radars in the VN offers additional insights into the types of precipitation, while pairs of radars positioned near each other enable retrieval of vertical winds via dual-Doppler analysis. Geometrically matched to the DPR reflectivity profiles in the GPM VN, these ground-based data and retrievals contribute more detailed characterization of the distinct kinematic and microphysical structures associated with each of the 12 DPR precipitation regimes. DPR reflectivity profiles linked with wind in the VN are restricted to GPM overpasses of proximal radar pairs that allow dual-Doppler analysis. Although a limited subset of DPR profiles in the VN are matched with vertical motion, agreement between the reflectivity structures paired with wind data and those of the greater DPR dataset in the VN suggest that estimates of vertical motion may be inferred in regions without ground-based measurements. We present a climatology of the 12 convective regimes identified within the DPR VN dataset as well as early efforts to estimate the kinematic and microphysical structures of precipitation profiles within the greater GPM DPR dataset by applying machine learning techniques. Precipitation data paired with global estimates of vertical winds from these efforts offer early insight to and support upcoming missions to retrieve convective mass flux, including the Investigation of Convective Updrafts (INCUS) in the Tropics and the global Atmosphere Observing System (AOS).

Precipitation↗

NASA NTRS2003

Remote Radio Sounding Science for JIMO

Radio sounding of the Earth's top side ionosphere and magnetosphere is a proven technique from geospace missions such as the International Satellites for Ionospheric Studies (ISIS) and the Imager for Magnetopause-to-Aurora Global Exploration (IMAGE). Application of this technique to the Jupiter Icy Moons Orbiter (JIMO) mission will provide unique remote sensing observations of the plasma and magnetic field environments, and the subsurface conductivities, of Europa, Ganymede, and Callisto. Spatial structures of ionospheric plasma above the moon surfaces vary in response to magnetic field perturbations from (1) magnetospheric plasma flows, (2) ionospheric currents from ionization of sputtered surface material, and (3) induced electric currents in salty subsurface oceans. Radio sounding at 3 kHz to 10 MHz can provide globally-determined electron densities necessary for the extraction of the oceanic current signals and supplements in-situ plasma and magnetic field measurements. Subsurface variations in conductivity, can be investigated by radio sounding from 10 MHz to 40 MHz allowing the determination of the presence of dense and solid-liquid phase boundaries associated with oceans and related structures in overlying ice crusts.

Green, J. L.↗

NASA NTRS2004

Radio Sounding Techniques for the Galilean Icy Moons and their Jovian Magnetospheric Environment

Radio sounding of the Earth's topside ionosphere and magnetosphere is a proven technique from geospace missions such as the International Satellites for Ionospheric Studies (ISIS) and the Imager for Magnetopause-to-Aurora Global Exploration (IMAGE). Application of this technique to Jupiter's icy moons and the surrounding Jovian magnetosphere will provide unique remote sensing observations of the plasma and magnetic field environments and the subsurface conductivities, of Europa, Ganymede, and Callisto. Spatial structures of ionospheric plasma above the surfaces of the moons vary in response to magnetic-field perturbations from (1) magnetospheric plasma flows, (2) ionospheric currents from ionization of sputtered surface material, and (3) induced electric currents in salty subsurface oceans and from the plasma flows and ionospheric currents themselves. Radio sounding from 3 kHz to 10 MHz can provide the global electron densities necessary for the extraction of the oceanic current signals and supplements in-situ plasma and magnetic field measurements. While radio sounding requires high transmitter power for subsurface sounding, little power is needed to probe the electron density and magnetic field intensity near the spacecraft. For subsurface sounding, reflections occur at changes in the dielectric index, e.g., at the interfaces between two different phases of water or between water and soil. Variations in sub-surface conductivity of the icy moons can be investigated by radio sounding in the frequency range from 10 MHz to 50 MHz, allowing the determination of the presence of density and solid-liquid phase boundaries associated with oceans and related structures in overlying ice crusts. The detection of subsurface oceans underneath the icy crusts of the Jovian moons is one of the primary objectives of the Jupiter Icy Moons Orbiter (JIMO) mission. Preliminary modeling results show that return signals are clearly distinguishable be&een an ice crust with a thickness of 7 km on 1) an ocean and 2) a layer of bedrock. Knowledge of the ionospheric contributions to the time delay of the low-frequency subsurface radar is shown to be important in obtaining accurate depth information.

Green, James L.↗

NASA NTRS1992

Topographic mapping from ERS-1 and SEASAT radar interferometry

A radar interferometric technique for topographic mapping of surfaces yields a high resolution, globally consistent approach to generation of digital elevation models. The technique is illustrated with maps generated from SEASAT and European Space Agency Remote Sensing Satellite (ERS-1) data. A SEASAT interferometric image of a forested area which includes some unvegetated lava flows is analyzed. An analysis of errors expected from application of the technique to maps generated from ERS-1 data is presented. An orbital scenario for a global mapping mission is outlined.

Zebker, Howard A.↗

NASA NTRSDate not supplied

Grid Refinement Techniques for the 𝜸-Re𝜽𝒕 Transition Model in FUN3D

There has been an increased focus on the overall accuracy and grid convergence of Reynolds-averaged Navier-Stokes (RANS)-based transition models from the recent AIAA and NATO-AVT workshops. Even though satisfactory grid convergence could be achieved for simple two-dimensional flow configurations, it required mesh counts that are substantially larger than those used in typical applications. In this paper, we focus our efforts on understanding how the grid resolution and topology influences the accuracy and convergence of results by studying the Schubauer and Skramstad flat-plate configuration and the NLF-0416 airfoil at an angle of attack equal to five degrees using FUN3D, a second-order finite-volume code. By focusing on these cases, we can analyze both natural and separation-induced transition scenarios. Multiple grid refinement strategies are investigated. First, we determine the relative effectiveness of zonal streamwise refinement in the transition region within structured grids as an alternative to the costly option of globally uniform refinement of a baseline grid. We also complement this zonal technique by globally varying the wall-normal resolution keeping the streamwise resolution fixed. The zonal streamwise refinement can accurately model natural transition in a flat-plate boundary layer and separation-induced transition, but struggles to accurately model natural transition in airfoil flows. A series of unstructured prismatic grids that have similar node counts and viscous wall spacings as the structured hexahedral grids are also tested, and they do not achieve grid convergence until an extremely fine resolution. Last, we employ adjoint-based unstructured grid adaptation in FUN3D to natural and separation-induced transition on the NLF-0416 airfoil. The adjoint-based refinement process converges to the same solution as the baseline family of structured grids, but leads to smaller errors on coarser grids.

Grid Adaptation↗

NASA NTRSDate not supplied

Grid Refinement Techniques for the 𝜸-Re 𝜽 𝒕 Transition Model in FUN3D

There has been an increased focus on the overall accuracy and grid convergence of Reynolds-averaged Navier-Stokes (RANS)-based transition models from the recent AIAA and NATO-AVT workshops. Even though satisfactory grid convergence could be achieved for simple two-dimensional flow configurations, it required mesh counts that are substantially larger than those used in typical applications. In this paper, we focus our efforts on understanding how the grid resolution and topology influences the accuracy and convergence of results by studying the Schubauer and Skramstad flat-plate configuration and the NLF-0416 airfoil at an angle of attack equal to five degrees using FUN3D, a second-order finite-volume code. By focusing on these cases, we can analyze both natural and separation-induced transition scenarios. Multiple grid refinement strategies are investigated. First, we determine the relative effectiveness of zonal streamwise refinement in the transition region within structured grids as an alternative to the costly option of globally uniform refinement of a baseline grid. We also complement this zonal technique by globally varying the wall-normal resolution keeping the streamwise resolution fixed. The zonal streamwise refinement can accurately model natural transition in a flat-plate boundary layer and separation-induced transition, but struggles to accurately model natural transition in airfoil flows. A series of unstructured prismatic grids that have similar node counts and viscous wall spacings as the structured hexahedral grids are also tested, and they do not achieve grid convergence until an extremely fine resolution. Last, we employ adjoint-based unstructured grid adaptation in FUN3D to natural and separation-induced transition on the NLF-0416 airfoil. The adjoint-based refinement process converges to the same solution as the baseline family of structured grids, but leads to smaller errors on coarser grids.

Grid Adaptation↗

NASA NTRS2000

Rapid Model Fabrication and Testing for Aerospace Vehicles

Advanced methods for rapid fabrication and instrumentation of hypersonic wind tunnel models are being developed and evaluated at NASA Langley Research Center. Rapid aeroheating model fabrication and measurement techniques using investment casting of ceramic test models and thermographic phosphors are reviewed. More accurate model casting techniques for fabrication of benchmark metal and ceramic test models are being developed using a combination of rapid prototype patterns and investment casting. White light optical scanning is used for coordinate measurements to evaluate the fabrication process and verify model accuracy to +/- 0.002 inches. Higher-temperature (<210C) luminescent coatings are also being developed for simultaneous pressure and temperature mapping, providing global pressure as well as global aeroheating measurements. Together these techniques will provide a more rapid and complete experimental aerodynamic and aerothermodynamic database for future aerospace vehicles.

Buck, Gregory M.↗

NASA NTRS2012

Longitudinal Differences of Ionospheric Vertical Density Distribution and Equatorial Electrodynamics

Accurate estimation of global vertical distribution of ionospheric and plasmaspheric density as a function of local time, season, and magnetic activity is required to improve the operation of space-based navigation and communication systems. The vertical density distribution, especially at low and equatorial latitudes, is governed by the equatorial electrodynamics that produces a vertical driving force. The vertical structure of the equatorial density distribution can be observed by using tomographic reconstruction techniques on ground-based global positioning system (GPS) total electron content (TEC). Similarly, the vertical drift, which is one of the driving mechanisms that govern equatorial electrodynamics and strongly affect the structure and dynamics of the ionosphere in the low/midlatitude region, can be estimated using ground magnetometer observations. We present tomographically reconstructed density distribution and the corresponding vertical drifts at two different longitudes: the East African and west South American sectors. Chains of GPS stations in the east African and west South American longitudinal sectors, covering the equatorial anomaly region of meridian approx. 37 deg and 290 deg E, respectively, are used to reconstruct the vertical density distribution. Similarly, magnetometer sites of African Meridian B-field Education and Research (AMBER) and INTERMAGNET for the east African sector and South American Meridional B-field Array (SAMBA) and Low Latitude Ionospheric Sensor Network (LISN) are used to estimate the vertical drift velocity at two distinct longitudes. The comparison between the reconstructed and Jicamarca Incoherent Scatter Radar (ISR) measured density profiles shows excellent agreement, demonstrating the usefulness of tomographic reconstruction technique in providing the vertical density distribution at different longitudes. Similarly, the comparison between magnetometer estimated vertical drift and other independent drift observation, such as from VEFI onboard Communication/Navigation Outage Forecasting System (C/NOFS) satellite and JULIA radar, is equally promising. The observations at different longitudes suggest that the vertical drift velocities and the vertical density distribution have significant longitudinal differences; especially the equatorial anomaly peaks expand to higher latitudes more in American sector than the African sector, indicating that the vertical drift in the American sector is stronger than the African sector.

total electron content↗

NASA NTRS1971

Global trajectory targeting via computer graphics

A technique is described in which the two-point boundary value problem (TPBVP) may be solved with the aid of interactive computer graphics. The particular TPBVP considered is the optimal electric propulsion space trajectory problem. An appropriate two-dimensional projection of the TPBVP mapping, or trajectory, is displayed on the computer's television screen, and a man-in-the-loop varies selected trajectory starting conditions in the fashion of a nonlinear walk until the viewed trajectory endpoint lies near a displayed target. Once global targeting is accomplished in this manner, program internal logic can easily handle local targeting to strongly solve the TPBVP.

Mann, F. I.↗

NASA NTRS1981

The effect of data analysis techniques on the interpretation of wide-angle longwave radiation measurements

Three different data analysis techniques - shape factor, parameter estimation, and deconvolution - have been applied to the same set of satellite radiation measurements to determine their effect on the estimated radiation field. The measurements are from a wide-angle, horizon-to-horizon, nadir-pointing sensor. The shape factor technique reduces each measurement to a radiant exitance at the top of the atmosphere by simple division by a constant. The parameter estimation technique processes all measurements together as a batch and defines the radiant exitance as a least-squares fit to the data. The deconvolution technique takes advantage of the fact that spherical harmonics are the eigenfunctions of the measurement operator. All three techniques are derived, and their assumptions, advantages and disadvantages are discussed. Their results are compared globally, zonally, regionally and on a spatial spectrum basis. All three techniques give comparable results for global parameters; however, results on a regional scale were quite different. The standard deviations of the regional differences in radiant exitance varied from 7.4 to 13.5 W/sq m. Of the three techniques, the parameter estimation technique produced the best regional results and is the choice of the author.

Green, R. N.↗

NASA NTRS1997

Constellation Coverage Analysis

The design of satellite constellations requires an understanding of the dynamic global coverage provided by the constellations. Even for a small constellation with a simple circular orbit propagator, the combinatorial nature of the analysis frequently renders the problem intractable. Particularly for the initial design phase where the orbital parameters are still fluid and undetermined, the coverage information is crucial to evaluate the performance of the constellation design. We have developed a fast and simple algorithm for determining the global constellation coverage dynamically using image processing techniques. This approach provides a fast, powerful and simple method for the analysis of global constellation coverage.

Martin W. Lo↗