Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “frit”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14

MODELING SOLIDIFICATION-INDUCED STRESSES IN CERAMIC WASTE FORMS CONTAINING NUCLEAR WASTES

The goal of this work is to produce a ceramic waste form (CWF) that permanently occludes radioactive waste. This is accomplished by absorbing radioactive salts into zeolite, mixing with glass frit, heating to a molten state 915 C to form a sodalite glass matrix, and solidifying for long-term storage. Less long term leaching is expected if the solidifying cooling rate doesn’t cause cracking. In addition to thermal stress, this paper proposes that a stress is formed during solidification which is very large for fast cooling rates during solidification and can cause severe cracking. A solidifying glass or ceramic cylinder forms a dome on the cylinder top end. The temperature distribution at the time of solidification causes the stress and the dome. The dome height, “the length deficit,” produces an axial stress when the solid returns to room temperature with the inherent outer region in compression, the inner in tension. Large tensions will cause cracking of the specimen. The temperature deficit, derived by dividing the length deficit by the coefficient of thermal expansion, allows solidification stress theory to be extended to the circumferential stress. This paper derives the solidification stress theory, gives examples, explains how to induce beneficial stresses, and compares theory to experimental data.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Evaluation Of Glass Density to Support the Estimation of Fissile Mass Loadings in Sludge Batch 10 Glasses

Per a directive from the Department of Energy Savannah River Operations Office (DOE-SR) in 2008, the fissile mass loading concentration must remain below 897 g/m 3 in each high-level waste (HLW) glass canister produced by the Defense Waste Processing Facility (DWPF). To support Sludge Batch 5 (SB5) processing, the Savannah River National Laboratory (SRNL) developed a technical basis that facilitates the evaluation of fissile mass loading of the glass product. The calculation is based on the iron (Fe) concentration in the glass as determined by measurements from the Slurry Mix Evaporator acceptability analysis as well as the glass density. In April 2022, a subsequent DOE-SR directive increased the fissile mass loading limit to 2500 g/m 3 beginning with Sludge Batch 11. Thus, the 897 g/m 3 limit still applies to Sludge Batch 10 (SB10) processing. For SB5 through initial Sludge Batch 9 (SB9) processing prior to coupled operation with the Salt Waste Processing Facility (SWPF), SRNL provided DWPF a bounding glass density value that was based on a statistical evaluation of density measurements. To eliminate the need for experimental work, a composition-based density model for HLW glasses was developed at SRNL in 2019. The objective of this report is to present the bounding glass density determined with the composition-based density model for SB10 sludge-only (SO) and coupled processing.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Evaluation of Glass Density to Support the Estimation of Fissile Mass Loadings in Sludge Batch 10 Glasses

Per a directive from the Department of Energy Savannah River Operations Office (DOE-SR) in 2008, the fissile mass loading concentration must remain below 897 g/m 3 in each high-level waste (HLW) glass canister produced by the Defense Waste Processing Facility (DWPF). To support Sludge Batch 5 (SB5) processing, the Savannah River National Laboratory (SRNL) developed a technical basis that facilitates the evaluation of fissile mass loading of the glass product. The calculation is based on the iron (Fe) concentration in the glass as determined by measurements from the Slurry Mix Evaporator acceptability analysis as well as the glass density. In April 2022, a subsequent DOE-SR directive increased the fissile mass loading limit to 2500 g/m 3 beginning with Sludge Batch 11. Thus, the 897 g/m 3 limit still applies to Sludge Batch 10 (SB10) processing.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

A Pareto Algorithm for Efficient De Novo Design of Multi-functional Molecules

Here, we have introduced a Pareto sorting algorithm into Synopsis, a de novo design program that generates synthesizable molecules with desirable properties. We give a detailed description of the algorithm and illustrate its working in 2 different de novo design settings: the design of putative dual and selective FGFR and VEGFR inhibitors, and the successful design of organic structure determining agents (OSDAs) for the synthesis of zeolites. We show that the introduction of Pareto sorting not only enables the simultaneous optimization of multiple properties but also greatly improves the performance of the algorithm to generate molecules with hard-to-meet constraints. This in turn allows us to suggest approaches to address the problem of false positive hits in de novo structure based drug design by introducing structural and physicochemical constraints in the designed molecules, and by forcing essential interactions between these molecules and their target receptor.

60 APPLIED LIFE SCIENCES↗

Design of Organic Structure Directing Agents for Chiral Zeolite Beta A

In this work, we have designed chiral organic structure directing agents (OSDAs) to direct the formation of enantiomerically enriched zeolite BEA. The in silico design was a combination of a multi-objective scoring function with exhaustive and stochastic virtual combinatorial chemistry and de novo design algorithms. Importantly, the algorithms used directly consider the synthetic accessibility of the designed OSDAs. We have identified 175 putative OSDAs of which one enantiomer has a low stabilization energy in the P4 1 22 enantiomorph of zeolite BEA and the mirror image enantiomer has a significantly less favorable stabilization energy. In addition, 42 of the designed compounds have a significantly less favorable stabilization energy in the competing BEB zeolite. Enantiomerically pure zeolite BEA is of interest for stereoselective separation and catalysis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

In situ Synchrotron X‐ray Metrology Boosted by Automated Data Analysis for Real‐time Monitoring of Cathode Calcination

Abstract Synchrotron X‐ray‐based in situ metrology is advantageous for monitoring the synthesis of battery materials, offering high throughput, high spatial and temporal resolution, and chemical sensitivity. However, the rapid generation of massive data poses a challenge to on‐site, on‐the‐fly analysis needed for real‐time process monitoring. Here, a weighted lagged cross‐correlation (WLCC) similarity approach is presented for automated data analysis, which merges with in situ synchrotron X‐ray diffraction metrology to monitor the calcination process of the archetypal nickel‐based cathode, LiNiO 2 . The WLCC approach, incorporating variables that account for peak shifts and width changes associated with structural transformations, enables rapid extraction of phase progression within 10 seconds from tens of diffraction patterns. Details are captured, from initial precursors to intermediates and the final layered LiNiO 2 , providing information for agile on‐site adjustments during experiments and complementing post hoc diffraction analysis by offering insights into early‐stage phase nucleation and growth. Expanding this data‐powered platform paves the way for real time calcination process monitoring and control, which is pivotal to quality control in battery cathode manufacturing.

36 MATERIALS SCIENCE↗

Percutaneous Vertebroplasty is no Risk Factor for New Vertebral Fractures and Protects Against Further Height Loss (VERTOS IV)

Background: Percutaneous vertebroplasty (PV) is an alternative option to treat pain after an osteoporotic vertebral compression fracture (OVCF). Controversy exists as to whether PV increases the risk of new OVCFs or prevents further vertebral height loss in treated levels. We assessed both during 1-year follow-up in patients with acute OVCF randomised to PV or a sham procedure. Methods: VERTOS IV is a prospective, multicentre, randomised controlled trial comparing PV with sham therapy in 180 patients. New OVCFs and further vertebral height loss were assessed at 3, 6, and 12 months. Results: After a median follow-up of 12 months (interquartile range (IQR) = 12–12) 31 new fractures were reported in 15 patients from the PV group and 28 new fractures in 19 patients from the sham group. The occurrence of new vertebral fractures did not significantly differ between the groups (χ{sup 2}(1) = 0.83, p = 0.36, OR = .71, 95%CI = 0.33–1.50). There was no higher fracture risk of adjacent versus distant vertebrae. After sham procedure, further height loss of treated vertebrae occurred more frequently (7 patients (8%) in the PV group and 39 (45%) in the sham group (χ{sup 2}(1) = 28.85, p < 0.001, OR = 9.84, 95%CI = 4.08–23.73)) and was more severe (p < .001) than after PV. Conclusions: The risk of further vertebral height loss is significantly lower after PV compared to a sham intervention, i.e. PV protects against progressive vertebral height loss. In addition, PV does not increase the risk of new adjacent and distant OVCFs. Level of Evidence: Level 1a, therapeutic study. ClinicalTrials.gov number, NCT01200277.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Pareto-Lognormal Modeling of Known and Unknown Metal Resources. II. Method Refinement and Further Applications

Pareto-lognormal modeling of worldwide metal deposit size–frequency distributions was proposed in an earlier paper (Agterberg in Nat Resour 26:3–20, 2017). In the current paper, the approach is applied to four metals (Cu, Zn, Au and Ag) and a number of model improvements are described and illustrated in detail for copper and gold. The new approach has become possible because of the very large inventory of worldwide metal deposit data recently published by Patiño Douce (Nat Resour 25:97–124, 2016c). Worldwide metal deposits for Cu, Zn and Ag follow basic lognormal size–frequency distributions that form straight lines on lognormal Q–Q plots. Au deposits show a departure from the straight-line model in the vicinity of their median size. Both largest and smallest deposits for the four metals taken as examples exhibit hyperbolic size–frequency relations and their Pareto coefficients are determined by fitting straight lines on log rank–log size plots. As originally pointed out by Patiño Douce (Nat Resour Res 25:365–387, 2016d), the upper Pareto tail cannot be distinguished clearly from the tail of what would be a secondary lognormal distribution. The method previously used in Agterberg (2017) for fitting the bridge function separating the largest deposit size–frequency Pareto tail from the basic lognormal is significantly improved in this paper. A new method is presented for estimating the approximate deposit size value at which the upper tail Pareto comes into effect. Although a theoretical explanation of the proposed Pareto-lognormal distribution model is not a required condition for its applicability, it is shown that existing double Pareto-lognormal models based on Brownian motion generalizations of the multiplicative central limit theorem are not applicable to worldwide metal deposits. Neither are various upper tail frequency amplification models in their present form. Although a physicochemical explanation remains possible, it is argued that preferential mining of the largest and smallest orebodies can have economic historical reasons. The size–frequency distribution of uranium can be regarded as lognormal without Pareto tails. At the end of the paper, it is shown that original copper deposit size data can be used for forward projection of discovery trends toward the end of this century.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Effectiveness of Radiotherapy in Myxoid Sarcomas Is Associated With a Dense Vascular Pattern

Purpose: Surgery and adjuvant radiotherapy (RT) have long been the standard treatment for most deep-seated sarcomas; however, since the randomized trial from the National Cancer Institute of Canada, which described similar local control for pre- vs. postoperative RT, both modalities are now widely accepted. As a group, sarcomas are classified as radiation resistant. The subgroup of myxoid liposarcoma (MLS), a sarcoma with a typical vascular crow's feet pattern, is highly radiosensitive, but a mechanism for this phenomenon is unknown. Here we describe our results with preoperative RT and propose a mechanism explaining the high sensitivity based on the distinctive vascularization pattern of MLS. Methods and Materials: Between 2002 and 2006, 31 sarcoma patients, including 10 with MLS, underwent preoperative RT at our institute. Resected specimens were histologically evaluated, focusing on classification, grade, and vascularization patterns. Results: Twenty sarcomas showed more than 80% pathologic response after preoperative RT. A pathologic complete response was found in all 'pure' MLS specimens after preoperative RT (n = 8). There were no pathologic complete responses in the remaining sarcoma patients (n = 23), although 12 showed 80% to 90% pathologic response. In contrast to the remaining RT-resistant sarcomas, the highly responding specimens contained branching vasculature, partial thrombus formation and inflammation of medium sized arterioles, similar to the vascular changes in MLS. Conclusions: Both MLS and sarcomas with MLS-like vasculature are highly radiosensitive. Radiation sensitivity may be explained by changes in medium-sized arterioles, obstructing the specific crow's feet vascularization and inducing hypoxia with secondary tumor cell death.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Reprogramming of cell junction modules during stepwise epithelial to mesenchymal transition and accumulation of malignant features in vitro in a prostate cell model

Epithelial to mesenchymal transition (EMT) is pivotal in tumor metastasis. Our previous work reported an EMT model based on primary prostate epithelial cells (EP156T) which gave rise to cells with mesenchymal phenotype (EPT1) without malignant transformation. To promote prostate cell transformation, cells were maintained in saturation density cultures to select for cells overriding quiescence. Foci formed repeatedly following around 8 weeks in confluent EPT1 monolayers. Only later passage EPT1, but not EP156T cells of any passage, could form foci. Cells isolated from the foci were named EPT2 and formed robust colonies in soft agar, a malignant feature present neither in EP156T nor in EPT1 cells. EPT2 cells showed additional malignant traits in vitro, including higher ability to proliferate following confluence, higher resistance to apoptosis and lower dependence on exogenous growth factors than EP156T and EPT1 cells. Microarray profiling identified gene sets, many of which belong to cell junction modules, that changed expression from EP156T to EPT1 cells and continued to change from EPT1 to EPT2 cells. Our findings provide a novel stepwise cell culture model in which EMT emerges independently of transformation and is associated with subsequent accumulation of malignant features in prostate cells. Reprogramming of cell junction modules is involved in both steps.

60 APPLIED LIFE SCIENCES↗

Design of organic structure directing agents for polymorph A zeolite beta

Zeolite beta is a crystalline material with layer-type faulting. The two end members with perfect crystalline order are beta A and beta B. While zeolite beta in faulted form is a widely used industrial catalyst, additional applications may be possible with the perfect crystalline forms. We here computationally design chemically synthesizable organic structure directing agents that may aid the nucleation and growth of pure zeolite beta A, excluding the competing product zeolite beta B.

36 MATERIALS SCIENCE↗

Modelling DNA origami self-assembly at the domain level

We present a modelling framework, and basic model parameterization, for the study of DNA origami folding at the level of DNA domains. Our approach is explicitly kinetic and does not assume a specific folding pathway. The binding of each staple is associated with a free-energy change that depends on staple sequence, the possibility of coaxial stacking with neighbouring domains, and the entropic cost of constraining the scaffold by inserting staple crossovers. A rigorous thermodynamic model is difficult to implement as a result of the complex, multiply connected geometry of the scaffold: we present a solution to this problem for planar origami. Coaxial stacking of helices and entropic terms, particularly when loop closure exponents are taken to be larger than those for ideal chains, introduce interactions between staples. These cooperative interactions lead to the prediction of sharp assembly transitions with notable hysteresis that are consistent with experimental observations. We show that the model reproduces the experimentally observed consequences of reducing staple concentration, accelerated cooling, and absent staples. We also present a simpler methodology that gives consistent results and can be used to study a wider range of systems including non-planar origami.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗