Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “experience report”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14

Apollo 16 geochemical X-ray fluorescence experiment: Preliminary report

The lunar surface was mapped with respect to Mg, Al, and Si, as Al/Si and Mg/Si ratios along the projected ground tracks swept out by the orbiting Apollo 16 spacecraft. The results confirm the observations made during the Apollo 15 flight and provide data for a number of features not covered before. The data are consistent with the idea that the moon has a widespread differentiated crust (the highlands). The Al/Si and Mg/Si chemical ratios correspond to that for anorthositic gabbro through gabbroic anorthosites or feldspathic basalts. The X-ray results suggest the occurrence of this premare crust or material similar to it as the Descartes landing site.

Adler, I.↗

Apollo 16 geochemical X-ray fluorescene experiment: Preliminary report

The lunar surface was mapped with respect to Mg, Al and Si as Al/Si and Mg/Si ratios along the projected ground tracks swept out by the orbiting Apollo 16 spacecraft. The results confirm the observations made during the Apollo 15 flight and provide data for a number of features not covered before. The data are consistent with the idea that the moon has a widespread differentiated crust (the highlands). The Al/Si and Mg/Si chemical ratios correspond to those for anorthositic gabbro through gabbroic anorthosites or feldspathic basalts. The X-ray results suggest the occurrence of this premare crust, or material similar to it, at the Descartes landing site.

Adler, I.↗

Apollo 16 geochemical X-ray fluorescence experiment - Preliminary report.

Mapping of the lunar surface with respect to magnesium, aluminum, and silicon as aluminum/silicon and magnesium/silicon intensity ratios along the projected ground tracks swept out by the orbiting Apollo 16 spacecraft. The results confirm the observations made during the Apollo 15 flight and provide new data for a number of features not covered before. The data are consistent with the idea that the moon has a widespread differentiated crust (the highlands). The aluminum/silicon and magnesium/silicon concentration ratios correspond to those for anorthositic gabbros through gabbroic anorthosites or feldspathic basalts. The X-ray results suggest the occurrence of this premare crust or material similar to it at the Descartes landing site.

Adler, I.↗

The Martian atmosphere - Mariner 9 television experiment progress report.

Atmospheric phenomena appearing in the Mariner 9 television pictures are discussed in detail. The surface of the planet was heavily obscured by a global dust storm during the first month in orbit. Brightness data during this period can be fitted by a semi-infinite scattering and absorbing atmosphere model with a single-scattering albedo in the range 0.70-0.85. This low value suggests that the mean radius of the particles responsible for the obscuration was at least 10 microns. By the end of the second month, this dust storm had largely dissipated, leaving a residual optical depth of about 0.1. Much of the region north of 45 deg N was covered by variable clouds comprising the north polar hood.

Leovy, C. B.↗

Analysis of fourth sounding rocket heat pipe experiment, summary report

An analysis was made of the cryogenic axial groove methane and axial groove nitrogen heat pipes. Data cover the establishment of reliable start-up and operational data for the cryogenic pipe and its reference control pipes, and requirements for and the applicability of cryogenic heat pipes to NASA coolers.

Brennan, P. J.↗

Diurnal experiment data report, 19-20 March 1974

Temperature and wind data are presented from 70 small meteorological sounding rockets launched from eight selected launch sites in the Western Hemisphere. Table 1 gives a complete listing of the launch sites involved and the altitude of temperature and wind observations successfully completed.

Schmidlin, F. J.↗

Flight 1 technical report for experiment 74-37 contained polycrystalline solidification in low-G

A .005 M solution of fluorescein in cyclohexanol was directionally solidified in a standard 10 x 10 x 45mm UV silica cuvette, using a bottom thermoelectric chilling device. Progress of the experiment was monitored by time lapse photography. During flight (SPAR I) the camera malfunctioned and only one quarter of the expected data were collected. Comparison of flight and ground specimens indicated that: (1) The dark green layer observed ahead of the solid-liquid interface which is most likely the solute-enriched zone, appears to be wider in the flight specimen; (2) Parasitic nucleation ahead of the solid-liquid interface in the flight sample led to an irregularly shaped interface, smaller grain size, equiaxed grain morphology and a larger average macroscopic growth rate; (3) The formation of equiaxed grains ahead of the solid-liquid interface in the flight specimen may be attributed to ordered islands within the liquid, which survived remelting because of the low degree of superheating (approximately equal to 1.5 C), did not settle because of reduced gravity and acted as nuclei during cooling.

Papaziak, J. M.↗

Flight 1 technical report for experiment 74-36: Thermal migration of bubbles and their interaction with solidification interfaces

Specimens of gas saturated carbon tetrabromide were directionally solidified in a transparent furnace using a gradient freeze technique. The original temperature gradient was 5 C/cm and the cooling rate was 40 C/h. Progress of the experiment was monitored photographically. Gas bubbles were generated at the advancing solidification front in each of the three specimens. The gas bubbles were observed to increase in size, coalesce, and eventually be grown into the solid specimen under low gravity conditions. No bubble detachment from the interface was observed. Identical specimens processed in the laboratory showed bubble nucleation, bubble growth, and eventual bubble detachment due to buoyancy forces. Examination of the specimens showed a significantly greater void content in the low gravity processed samples. The grain size was observed to be finer in the low gravity processed samples.

Papazian, J. M.↗

Viking: Mars atmospheric water vapor mapping experiment - Preliminary report of results

Observations made from the Viking 1 orbiter show very little water vapor in the Mars atmosphere in the southern hemisphere (0 to 3 precipitable micrometers) with a gradual increase across the equator to northern latitudes. Maximum amounts between 20 and 30 micrometers have been observed in the short period covered by the observations to date. The season, northern midsummer, corresponds to the beginning of the water vapor cycle in that hemisphere. A strong repetitive diurnal cycling between the solid and vapor phase is observed at a site to the east of the Tharsis Ridge at 10 deg north latitude; the vapor lies close to the martian surface and is most probably in saturation equilibrium with a surface haze or fog throughout much of the day.

Farmer, C. B.↗

Hardware report for experiment M133, sleep monitoring on Skylab

The purpose of the experiment was objectively to measure sleep quantity and quality during prolonged space flight with the use of automatic equipment for onboard analyses of electroencephalographic (EEG) and electro-oculographic (EOG) activity and telemetry of sleep stage data.

Booher, C. R.↗

The Viking carbon assimilation experiments - Interim report

A synthesis of organic matter from atmospheric carbon monoxide or carbon dioxide, or both, appears to take place in the surface material of Mars at a low rate. The synthesis appears to be thermolabile and to be inhibited by moisture.

Horowitz, N. H.↗

Flight IV technical report for experiment 74-37 contained polycrystalline solidification in low-G

Experiments were performed to study the effect of a low-gravity environment on the columnar-to-equiaxed transition (CET) during polycrystalline solidification. Solutions of H2O-30 wt% NH4Cl and H2O-37 wt% NH4Cl were solidified in semicylindrical molds with radial heat extraction. Both solutions were quenched from the same soak temperature (90 C); the respective superheat temperatures were, therefore, approximately 57 and 23 C. The lower superheat resulted in a completely columnar structure, and the higher superheat resulted in a 1/3 columnar - 2/3 equiaxed microstructure; these results were independent of the relationship between heat flow direction and gravity. Grain multiplication mechanisms observed were showering, thermal inversion driven convection cells, and compositionally induced density inversion driven convection cells.

Papazian, J. M.↗