Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “equilibrium potential”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14

Carbodiimide‐Induced Formation of Transient Polyether Cages**

Abstract The use of “fuel” compounds to drive chemical systems out of equilibrium is currently of interest because of the potential for temporally controlled, responsive behavior. We have recently shown that transiently formed crown ethers exhibit counterintuitive templation effects when generated in the presence of alkali metal cations: “matched” cations, such as K + with an 18‐crown‐6 analogue, suppress the formation of the macrocycles (negative templation). In this work, we describe two macrocyclic diacids that, on treatment with carbodiimides, give transient macrobicyclic cages analogous to polyether cages. Negative templation effects are observed for the smaller cage when generated in the presence of K + and Na + , but there is a weak, but reproducible, positive templation effect in the presence of Li + . The larger cage behaves similarly in the presence of Li + , K + , Rb + , and Cs + , but differently with Na + , which appears to bind to both the cage and the initial macrocycle.

Hossain, Mohammad Mosharraf↗

An ion specific continuum model on ionic surfactant's binary phase diagram in aqueous solution

Here, a continuum aggregation model is proposed to account for specific ion effects, enabling accurate phase diagrams calculations for the micellar, cylindrical and lamellar aggregates of sodium/potassium carboxylate surfactants in aqueous solution across a range of temperatures. Three groups of concentrations at distinctive temperatures are fitted to build empirical temperature dependence given the limited availability of relevant experimental measurements. The specific ion effects are manifested in the aggregates' surface tension as well as in the distributions of counter-ions' concentrations in the vicinity of the aggregates. The aggregates' geometric sizes are well-reproduced. The differential evolution algorithm is applied to address boundary conditions of the electrostatic potential, aggregate size optimization as well as the equilibrium of monomers transferring between the aggregate and aqueous region.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Separation of Linear and Cyclic Siloxanes in Pure Silica Zeolites

We present a computational assessment of pure-silica zeolites for separating linear and cyclic siloxanes. We developed a force field (FF) for pure silica zeolites, when combined with our previously developed FF for siloxanes using standard Lorentz–Berthelot combining rules, shows good agreement with dispersion-corrected density functional theory calculations. We used molecular dynamics simulations to investigate diffusion of siloxanes in pure silica zeolites and identified a pure silica zeolite with the structure code FAU that enables kinetic separation of linear and cyclic siloxanes. FAU allows the diffusion of linear siloxanes (L2–L6) while excluding cyclic siloxanes. D4 siloxane does not diffuse in any of the investigated zeolites, eliminating the potential of pure silica zeolites to achieve equilibrium-based separations of linear and cyclic siloxanes.

adsorption↗

Insights into interfacial effect and local lithium-ion transport in polycrystalline cathodes of solid-state batteries

Interfacial issues commonly exist in solid-state batteries, and the microstructural complexity combines with the chemical heterogeneity to govern the local interfacial chemistry. The conventional wisdom suggests that “point-to-point” ion diffusion at the interface determines the ion transport kinetics. Here, we show that solid-solid ion transport kinetics are not only impacted by the physical interfacial contact but are also closely associated with the interior local environments within polycrystalline particles. In spite of the initial discrete interfacial contact, solid-state batteries may still display homogeneous lithium-ion transportation owing to the chemical potential force to achieve an ionic-electronic equilibrium. Nevertheless, once the interior local environment within secondary particle is disrupted upon cycling, it triggers charge distribution from homogeneity to heterogeneity and leads to fast capacity fading. Our work highlights the importance of interior local environment within polycrystalline particles for electrochemical reactions in solid-state batteries and provides crucial insights into underlying mechanism in interfacial transport.

25 ENERGY STORAGE↗

Two-component exciton condensates in an electron–hole bilayer

Macroscopic quantum coherence emerges when bosons condense into a Bose–Einstein condensate (BEC). Excitons are a long-sought solid-state route to high-temperature BECs with strong interactions, electrical tunability and potentially multicomponent spinor order, but conclusive evidence for equilibrium condensation has remained elusive. Here we report evidence for two-component exciton BECs in MoSe 2 /hBN/WSe 2 electron–hole bilayers by probing the spin–valley susceptibility of constituent electrons and holes. This heterostructure hosts equilibrium exciton fluids with four spin–valley flavours. Magneto-optical spectroscopy in a dilution refrigerator reveals three exciton condensate phases with distinct flavour polarizations. At zero magnetic field, the many-body ground state is a coherent superposition of two condensed intravalley exciton flavours. Under a magnetic field, the intravalley exciton condensate first switches to a two-component intervalley condensate through a first-order quantum phase transition at a weak critical field and then turns into a fully polarized single-component condensate at high fields. The condensate signatures form a dome in density–temperature space, persisting up to approximately 1.8 K. Our results establish van der Waals electron–hole bilayers as a versatile platform for strongly interacting, multicomponent exciton BECs.

Qi, Ruishi [University of California, Berkeley, CA↗

Charm quark evolution in the early stages of heavy-ion collisions

Heavy quarks are predominantly generated at the initial stage of relativistic heavy-ion collisions such that heavy flavor observables have the potential to provide information on the pre-equilibrium medium dynamics. In this study, we investigate the sensitivity of D-meson $R_{AA}$ and $v_2$ to early-time charm quark dynamics in Pb+Pb collisions at $\sqrt{s_{NN}}$=5.02 TeV. We employ the IP-Glasma+MUSIC+UrQMD framework to model the evolution of the bulk medium. Charm quarks are generated using PYTHIA with nuclear parton distribution functions and evolved using Langevin dynamics within MARTINI. We observe that even though there is significant momentum broadening in the earliest stage, D-meson $R_{AA}$ and $v_2$ are only weakly sensitive to pre-equilibrium interactions.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

QCD thermalization: Ab initio approaches and interdisciplinary connections

Heavy-ion collisions at BNL's Relativistic Heavy Ion Collider and CERN's Large Hadron Collider provide strong evidence for the formation of a quark-gluon plasma, with temperatures extracted from relativistic viscous hydrodynamic simulations shown to be well above the transition temperature from hadron matter. Outstanding problems in QCD include how the strongly correlated quark gluon matter forms in a heavy-ion collision, its properties off-equilibrium, and the thermalization process in the plasma. In this work, we review the theoretical progress in this field in weak coupling QCD effective field theories and in strong coupling holographic approaches based on gauge-gravity duality. We outline the interdisciplinary connections of different stages of the thermalization process to non equilibrium dynamics in other systems across energy scales ranging from inflationary cosmology, to strong field QED, to ultracold atomic gases, with emphasis on the universal dynamics of non-thermal and hydrodynamic attractors. We survey measurements in heavy-ion collisions that are sensitive to the early non-equilibrium stages of the collision and discuss the potential for future measurements. We summarize the current state-of-the art in thermalization studies and identify promising avenues for further progress.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Atomic-Level, Energy-Conversion Heat Transfer

Abstract Heat is stored in quanta of kinetic and potential energies in matter. The temperature represents the equilibrium and excited occupation (boson) of these energy conditions. Temporal and spatial temperature variations and heat transfer are associated with the kinetics of these equilibrium excitations. During energy-conversion (between electron and phonon systems), the occupancies deviate from equilibria, while holding atomic-scale, inelastic spectral energy transfer kinetics. Heat transfer physics reaches nonequilibrium energy excitations and kinetics among the principal carriers, phonon, electron (and holes and ions), fluid particle, and photon. This allows atomic-level tailoring of energetic materials and energy-conversion processes and their efficiencies. For example, modern thermal-electric harvesters have transformed broad-spectrum, high-entropy heat into a narrow spectrum of low-entropy emissions to efficiently generate thermal electricity. Phonoelectricity, in contrast, intervenes before a low-entropy population of nonequilibrium optical phonons becomes a high-entropy heat. In particular, the suggested phonovoltaic cell generates phonoelectricity by employing the nonequilibrium, low-entropy, and elevated temperature optical-phonon produced population—for example, by relaxing electrons, excited by an electric field. A phonovoltaic material has an ultranarrow electronic bandgap, such that the hot optical-phonon population can relax by producing electron-hole pairs (and power) instead of multiple acoustic phonons (and entropy). Examples of these quanta and spectral heat transfer are reviewed, contemplating a prospect for education and research in this field.

Engineering↗

Correlation of the rate of ultrasound propagation with other characteristic magnitudes of the liquid state

The application of ultrasonic radiation to the procedure for determining the physical properties of liquids is discussed. The basis for linking the kinetic properties of liquids to the equilibrium properties through the molecular structure and the potential of the intermolecular forces is defined. The test procedure using ultrasonic radiation is described. Results of tests with specified fluids are tabulated.

Stetiu, C.↗

Chemical structure of the deep atmosphere of Jupiter

Equilibrium abundances calculated for a system of over 500 compounds of 27 selected elements along a nominal Jupiter adiabat are reported. Several species predicted to be of negligible abundance in the visible upper troposphere if chemical equilibrium is exactly attained are found to be potential tracers of rapid vertical motions. Vertical mixing of certain species, especially CO, PH3, AsH3, GeS, and GeH4, may provide detectable quantities of these species near the visible cloudtops due to quenching and incomplete equilibration of the rapidly rising, rapidly cooling gas. Observational prospects for detecting such tracers of deep circulation are discussed in the light of the spectroscopic detection of CO in the 5-micron window on Jupiter and the confirmation of PH3 on both Jupiter and Saturn.

Barshay, S. S.↗

On the causes of temperature change in inhomogeneous low-density astrophysical plasmas

The temperature changes that are possible in inhomogeneous low-density astrophysical plasmas were investigated for a variety of boundary distribution functions that occur in astrophysics, with emphasis placed on the spatial changes in temperature and their correlations with those of the density caused by time-independent, but spatially varying, conservative potentials. It is proven that decelerating forces produce equilibrium temperatures that are anticorrelated with densities, provided that the boundary condition is non-Maxwellian, and the proof is extended analytically for a generalized Lorentzian distribution, showing that they obey a polytrope relation with the value of gamma between 0 and l.

Scudder, Jack D.↗

A Symmetry Breaking Experiment Aboard Mir and the Stability of Rotating Liquid Films

We discuss results from two parts of our study on the behavior of liquids under low-gravity conditions. The first concerns the Interface Configuration Experiment (ICE) aboard the Space Station Mir on the Mir-21/NASA-2 mission; for a certain 'exotic' container, distinct asymmetric liquid configurations are found as locally stable ones, even though the container itself is rotationally symmetric, in confirmation of mathematical results and numerical computations. The second investigation concerns the behavior of slowly rotating liquids; it is found that a rotating film instability observed previously in a physical experiment in 1-g, scaled to render gravity effects small, does not correspond to mathematical and computational results obtained for low gravity. These latter results are based on the classical equilibrium theory enhanced with a van der Waals potential of adhesion.

Concus, P.↗

Machine learning potential assisted exploration of complex defect potential energy surfaces

Abstract Atomic-scale defects generated in materials under both equilibrium and irradiation conditions can significantly impact their physical and mechanical properties. Unraveling the energetically most favorable ground-state configurations of these defects is an important step towards the fundamental understanding of their influence on the performance of materials ranging from photovoltaics to advanced nuclear fuels. Here, using fluorite-structured thorium dioxide (ThO 2 ) as an exemplar, we demonstrate how density functional theory and machine learning interatomic potential can be synergistically combined into a powerful tool that enables exhaustive exploration of the large configuration spaces of small point defect clusters. Our study leads to several unexpected discoveries, including defect polymorphism and ground-state structures that defy our physical intuitions. Possible physical origins of these unexpected findings are elucidated using a local cluster expansion model developed in this work.

36 MATERIALS SCIENCE↗

Potential-pH diagrams considering complex oxide solution phases for understanding aqueous corrosion of multi-principal element alloys

The potential-pH diagram, a graphical representation of the thermodynamically predominant reaction products in aqueous corrosion, is originally proposed for the corrosion of pure metals. The original approach only leads to stoichiometric oxides and hydroxides as the oxidation products. However, numerous experiments show that non-stoichiometric oxide scales are prevalent in the aqueous corrosion of alloys. In the present study, a room temperature potential-pH diagram considering oxide solid solutions, as a generalization of the traditional potential-pH diagram with stoichiometric oxides, is constructed for an FCC single-phase multi-principal element alloy (MPEA) based on the CALculation of PHAse Diagram method. The predominant reaction products, the ions in aqueous solution, and the cation distribution in oxides are predicted. The oxide solid solution is stabilized by the mixing free energy (or mixing entropy) and the stabilizing effect becomes more significant as the temperature increases. Consequently, solid solution oxides are stable in large regions of the potential-pH diagram and the mixing free energy mostly affects the equilibrium composition of the stable oxides, while the shape of stable regions for oxides is mostly determined by the structure of the stable oxides. Agreements are found for Ni 2+ , Fe 2+ , and Mn 2+ between the atomic emission spectroelectrochemistry measurements and thermodynamic calculations, while deviations exist for Cr 3+ and Co 2+ possibly due to surface complexation with species such as Cl - and the oxide dissolution. By incorporating the solution models of oxides, the current work presents a general and more accurate way to analyze the reaction products during aqueous corrosion of MPEAs.

Materials Science↗

Climate and the equilibrium state of land surface hydrology parameterizations

For given climatic rates of precipitation and potential evaporation, the land surface hydrology parameterizations of atmospheric general circulation models will maintain soil-water storage conditions that balance the moisture input and output. The surface relative soil saturation for such climatic conditions serves as a measure of the land surface parameterization state under a given forcing. The equilibrium value of this variable for alternate parameterizations of land surface hydrology are determined as a function of climate and the sensitivity of the surface to shifts and changes in climatic forcing are estimated.

Entekhabi, Dara↗

Multireference Electron Correlation Methods: Journeys along Potential Energy Surfaces

Multireference electron correlation methods describe static and dynamical electron correlation in a balanced way and, therefore, can yield accurate and predictive results even when single-reference methods or multiconfigurational self-consistent field theory fails. One of their most prominent applications in quantum chemistry is the exploration of potential energy surfaces. This includes the optimization of molecular geometries, such as equilibrium geometries and conical intersections and on-the-fly photodynamics simulations, both of which depend heavily on the ability of the method to properly explore the potential energy surface. Because such applications require nuclear gradients and derivative couplings, the availability of analytical nuclear gradients greatly enhances the scope of quantum chemical methods. This review focuses on the developments and advances made in the past two decades. A detailed account of the analytical nuclear gradient and derivative coupling theories is presented. Emphasis is given to the software infrastructure that allows one to make use of these methods. Notable applications of multireference electron correlation methods to chemistry, including geometry optimizations and on-the-fly dynamics, are summarized at the end followed by a discussion of future prospects.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Combined Effects of Hemicolligation and Ion Pairing on Reduction Potentials of Biphenyl Radical Cations

Here, formal reduction potentials of highly oxidizing and short-lived radical cations of substituted biphenyls generated by pulse radiolysis in 1,2-dichloroethane (DCE) were measured using a redox equilibrium ladder method. The effect of halide ion–radical interactions on reduction potentials of biphenyls was examined by utilizing the ability of DCE to release Cl – in the vicinity of the radical cation. The Hammett correlation of measured potentials across a range of over 700 mV shows saturation at high Hammett sigma values. This effect has been explained by both ion-pairing and hemicolligation interactions between biphenyl radical cations and Cl – and appears to modulate reduction potentials by as much as 400 mV. This finding offers a convenient way to manipulate the energetics of electron transfer involving organic redox species.

14 SOLAR ENERGY↗

A Hybrid Experimental and Theoretical Approach to Optimize Recovery of Rare Earth Elements from Acid Mine Drainage Precipitates by Oxalic Acid Precipitation

The development of processing techniques for the extraction of rare earth elements and critical minerals (REE/CM) from acid mine drainage precipitates (AMDp) has attracted increased interest in recent years. Processes under development often utilize a standard hydrometallurgical approach that includes leaching and solvent extraction followed by oxalic acid precipitation and calcination to produce a final rare earth oxide product. Impurities such as Ca, Al, Mn, Fe and Mg can be detrimental in the oxalate precipitation step and a survey of the literature showed limited data pertaining to the REE precipitation efficiency in solutions with high impurity concentrations. As such, a systematic laboratory-scale precipitation study was performed on a strip solution generated by the acid leaching and solvent extraction of an AMDp feedstock to identify the optimal processing conditions that maximize REE precipitation efficiency and product purity while minimizing the oxalic acid dosage. Given the unique chemical characteristics of AMDp, the feed solution utilized in this study contained a moderate concentration of REEs (440 mg/L) as well a significant concentration (>7000 mg/L total) of non-REE contaminants such as Ca, Al, Mn, Fe and Mg. Initially, a theoretical basis for the required oxalic acid dose, optimal pH and predicted precipitation efficiency was established by solution equilibrium calculations. Following the solution chemistry calculations, bench-scale precipitation experiments were conducted and these test results indicate that a pH of 1.5 to 2, a reaction time of more than 2 h and an oxalic acid dosage of 30 to 40 g/L optimized the REEs recovery of at ~95% to nearly 100% for individual REE species. The test results validated the optimal pH predicted by the solution chemistry calculations (1.5 to 5); however, the predicted dosage needed for complete REE recovery (10 g/L) was significantly lower than the experimentally-determined dosage of 30 to 40 g/L. The reason for this discrepancy was determined to be due to the large concentration of impurities and large number of potential metal complexes that cause inaccuracies in the solution equilibrium calculations. Based on these findings, a hybrid experimental and theoretical approach is proposed for future oxalic acid precipitation optimization studies.

oxalic acid precipitation↗