Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “empirical data”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14
All sourcesNASA NTRSDOE OSTI
NASA NTRS1974

Operation and performance of a lunar laser ranging station

The Lunar Laser Ranging Experiment has been in continuous operation for about 4 years using the McDonald Observatory 2.7-m telescope. Occupying only a small percentage of the available telescope time, the system is now measuring 350 lunar ranges per year, each with an accuracy of from 10 to 15 cm. This article tabulates the observed signal strengths, the success ratios, and the major operating restrictions that have characterized the daily performance of the experiment. These empirical data can be used to optimize the design of such installations in the future.

Silverberg, E. C.↗
NASA NTRS1974

Boundary layers in centrifugal compressors

The utility of boundary-layer theory in the design of centrifugal compressors is demonstrated. Boundary-layer development in the diffuser entry region is shown to be important to stage efficiency. The result of an earnest attempt to analyze this boundary layer with the best tools available is displayed. Acceptable prediction accuracy was not achieved. The inaccuracy of boundary-layer analysis in this case would result in stage efficiency prediction as much as four points low. Fluid dynamic reasons for analysis failure are discussed with support from flow data. Empirical correlations used today to circumnavigate the weakness of the theory are illustrated.

Dean, R. C., Jr.↗
NASA NTRS1975

Fracture control method for composite tanks with load sharing liners

The experimental program was based on the premise that the plastic sizing cycle, which each pressure vessel is subjected to prior to operation, acts as an effective proof test of the liner, screening out all flaws or cracks larger than a critical size. In doing so, flaw growth potential is available for cyclic operation at pressures less than the sizing pressure. Static fracture and cyclic life tests, involving laboratory type specimens and filament overwrapped tanks, were conducted on three liner materials: (1) 2219-T62 aluminum, (2) Inconel X750 STA, and (3) cryoformed 301 stainless steel. Variables included material condition, thickness, flaw size, flaw shape, temperature, sizing stress level, operating stress level and minimum-to-maximum operating stress ratio. From the empirical data base obtained, a procedure was established by which the service life of composite tanks with load sharing liners could be guaranteed with a high degree of confidence.

Bixler, W. D.↗
NASA NTRS1975

Review of aircraft noise propagation

The current state of knowledge about the propagation of aircraft noise was reviewed. The literature on the subject is surveyed and methods for predicting the most important and best understood propagation effects are presented. Available empirical data are examined and the data's general validity is assessed. The methods used to determine the loss of acoustic energy due to uniform spherical spreading, absorption in a homogeneous atmosphere, and absorption due to ground cover are presented. A procedure for determining ground induced absorption as a function of elevation angle between source and receiver is recommended. Other factors that affect propagation, such as refraction and scattering due to turbulence, which were found to be less important for predicting the propagation of aircraft noise, are also evaluated.

Putnam, T. W.↗
NASA NTRS1974

Multi-aspect techniques in remote sensing

Multi-aspect techniques, which use multispectral scanner information collected from two or more different view angles for each spatial element, are discussed. Empirical recognition results obtained with various combinations of information channels are presented. Theoretical calculations of multi-aspect reflectances of corn fields also are analyzed and compared with empirical data. Also presented is a brief comparison between recognition processing and scene attribute estimation techniques for extracting information from multispectral scanner data. One method for improving information extraction by employing a post-recognition attribute estimation procedure is suggested.

Malila, W. A.↗
NASA NTRS1976

Efficiencies for production of atomic nitrogen and oxygen by relativistic proton impact in air

Relativistic electron and proton impact cross sections are obtained and represented by analytic forms which span the energy range from threshold to 1 GeV. For ionization processes, the Massey-Mohr continuum generalized oscillator strength surface is parameterized. Parameters are determined by simultaneous fitting to (1) empirical data, (2) the Bethe sum rule, and (3) doubly differential cross sections for ionization. Branching ratios for dissociation and predissociation from important states of N2 and O2 are determined. The efficiency for the production of atomic nitrogen and oxygen by protons with kinetic energy less than 1 GeV is determined using these branching ratio and cross section assignments.

Porter, H. S.↗
NASA NTRS1977

Determining critical temperatures and volumes

Technique estimates critical temperature and volume of fluid from chemical composition and structure without additional empirical data. Method can help designers interested in materials for which critical constants are unavailable.

Fedors, R. F.↗
NASA NTRS1976

Prediction of light aircraft interior noise

At the present time, predictions of aircraft interior noise depend heavily on empirical correction factors derived from previous flight measurements. However, to design for acceptable interior noise levels and to optimize acoustic treatments, analytical techniques which do not depend on empirical data are needed. This paper describes a computerized interior noise prediction method for light aircraft. An existing analytical program (developed for commercial jets by Cockburn and Jolly in 1968) forms the basis of some modal analysis work which is described. The accuracy of this modal analysis technique for predicting low-frequency coupled acoustic-structural natural frequencies is discussed along with trends indicating the effects of varying parameters such as fuselage length and diameter, structural stiffness, and interior acoustic absorption.

Howlett, J. T.↗
NASA NTRS1976

Vibration ride comfort criteria

Results are presented for an experimental study directed to derive equal vibration discomfort curves, to determine the influence of vibration masking in order to account for the total discomfort of any random vibration, and to develop a scale of total vibration discomfort in the case of human response to whole-body vertical vibration. Discomfort is referred to as a subjective discomfort associated with the acceleration level of a particular frequency band. It is shown that passenger discomfort to whole-body vibration increases linearly with acceleration level for each frequency. Empirical data provide a mechanism for determining the degree of masking (or summation) of the discomfort of multiple frequency vibration. A scale for the prediction of passenger discomfort is developed.

Dempsey, T. K.↗
NASA NTRS1977

Assessment of analytical techniques for predicting solid propellant exhaust plumes

The calculation of solid propellant exhaust plume flow fields is addressed. Two major areas covered are: (1) the applicability of empirical data currently available to define particle drag coefficients, heat transfer coefficients, mean particle size and particle size distributions, and (2) thermochemical modeling of the gaseous phase of the flow field. Comparisons of experimentally measured and analytically predicted data are made. The experimental data were obtained for subscale solid propellant motors with aluminum loadings of 2, 10 and 15%. Analytical predictions were made using a fully coupled two-phase numerical solution. Data comparisons will be presented for radial distributions at plume axial stations of 5, 12, 16 and 20 diameters.

Tevepaugh, J. A.↗
NASA NTRS1976

A summary of observations of the earth's bow shock

The earth's bow shock can be regarded as a fast steady-state collisionless magnetohydrodynamic shock exhibiting a wide range of plasma parameter values or as an example of superalfvenic flow of a MHD fluid past a blunt body. This paper summarizes our knowledge of the bow shock. Satellite crossings of the shock have given some empirical data on the position and shape of the bow shock. Theoretical calculations on position and shape show the critical nature of the Alfven number. The main physical process to be explained with regard to the bow shock is the mechanism of thermalization of the upstream solar wind. Some of the main classes of shocks observed are quasi-parallel shocks, low Mach number laminar shocks, and high beta shocks.

Fairfield, D. H.↗
NASA NTRS1977

Development of fiber shields for engine containment

Tests were conducted in translational launchers and spin pits to generate empirical data used in the design of a Kevlar shield for containing engine burst debris. Methods are given for modeling the relationship of fragment characteristics to shielding requirements. The change in relative importance of shield mounting provisions as fragment energy is increased is discussed.

Bristow, R. J.↗
NASA NTRS1978

Computational aerodynamics and the numerical aerodynamic simulation facility

Technical and economic reasons for accelerating the maturation of the discipline of computational aerodynamics include the cost of conducting the experiments required to provide the empirical data base for new aeronautical vehicles and the limitations in test facilities (Reynolds number, wall and support interferences, aeroelastic distortions, real-gas effects, etc.) for simulating the full-scale vehicle environment. General purpose computers do not have the necessary capability for the next stage of development. Solution of the three dimensional Reynolds averaged Naiver-Stokes equations in a short time to be practical for design purposes will require 40 times the power of current supercomputers. However, it is feasible to construct a special purpose processor that will meet these requirements to enhance the nation's aerodynamic design capability in the 1980's.

Peterson, V. L.↗
NASA NTRS1978

Analytical techniques for the study of some parameters of multispectral scanner systems for remote sensing

The author has identified the following significant results. The concept of average mutual information in the received spectral random process about the spectral scene was developed. Techniques amenable to implementation on a digital computer were also developed to make the required average mutual information calculations. These techniques required identification of models for the spectral response process of scenes. Stochastic modeling techniques were adapted for use. These techniques were demonstrated on empirical data from wheat and vegetation scenes.

Wiswell, E. R.↗
NASA NTRS1978

Development of a nonlinear switching function and its application to static lift characteristics of straight wings

A mathematical modeling technique was developed for the lift characteristics of straight wings throughout a very wide angle of attack range. The technique employs a mathematical switching function that facilitates the representation of the nonlinear aerodynamic characteristics in the partially and fully stalled regions and permits matching empirical data within + or - 4 percent of maximum values. Although specifically developed for use in modeling the lift characteristics, the technique appears to have other applications in both aerodynamic and nonaerodynamic fields.

Hewes, D. E.↗
NASA NTRS1977

The origin of comets

Empirical data related to questions regarding the origin of comets are examined, taking into account the primitive temperature and its evolution, the cometary C-12/C-13 isotope ratio, the chemistry of comets, and the solar-system related orbits of the comets. The theories of cometary origin considered are related to a condensation of comets from the solar nebula and a later ejection into Oort's cloud, a recent condensation of comets in situ, a capture of interstellar comets, and a reversal of the arrow of time in the traditional evolution of comets. The only hypothesis which seems to survive an evaluation of the theories on the basis of the existing data is that the comets were condensed some five billion years ago in the vicinity of the giant planets or beyond, at the outer edge of the solar nebula.

Delsemme, A. H.↗
NASA NTRS1978

Linear force-free fields in the lower corona

Boundary conditions are imposed on the normal component of B on two parallel planes which delineate the force-free volume of linear magnetic fields in low coronal levels of the solar atmosphere. Green's function is employed to ensure that equations for the magnetic field energy remain bounded and smooth. Field line tracings of a simple bipolar source distribution are developed and compared with empirical data obtained from visual observations in H(alpha), EUV, and X-rays.

Barbosa, D. D.↗
NASA NTRS1978

Solar-wind sputtering of the Martian atmosphere

The role of solar-wind sputtering in causing atmospheric mass loss from Mars is discussed. The atmospheric mass loss is studied by analogy to models of sputtering of solid surfaces and by use of empirical data for the lunar surface. Results show that Martian atmospheric mass loss, when integrated over the course of 4 times 10 to the ninth power years, amounts to 3.1 times 10 to the 41st power CO2 molecules. Preferential loss of light elements and isotopes by sputtering is also considered.

Haff, P. K.↗