SEARCH · Engineering Papers

Results for “emissions”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14

All sources NASA NTRS DOE OSTI

DOE OSTI2021

Utilizing Earth Observations of Soil Freeze/Thaw Data and Atmospheric Concentrations to Estimate Cold Season Methane Emissions in the Northern High Latitudes

The northern wetland methane emission estimates have large uncertainties. Inversion models are a qualified method to estimate the methane fluxes and emissions in northern latitudes but when atmospheric observations are sparse, the models are only as good as their a priori estimates. Thus, improving a priori estimates is a competent way to reduce uncertainties and enhance emission estimates in the sparsely sampled regions. Here, we use a novel way to integrate remote sensing soil freeze/thaw (F/T) status from SMOS satellite to better capture the seasonality of methane emissions in the northern high latitude. The SMOS F/T data provide daily information of soil freezing state in the northern latitudes, and in this study, the data is used to define the cold season in the high latitudes and, thus, improve our knowledge of the seasonal cycle of biospheric methane fluxes. The SMOS F/T data is implemented to LPX-Bern DYPTOP model estimates and the modified fluxes are used as a biospheric a priori in the inversion model CarbonTracker Europe-CH 4 . The implementation of the SMOS F/T soil state is shown to be beneficial in improving the inversion model’s cold season biospheric flux estimates. Our results show that cold season biospheric CH4 emissions in northern high latitudes are approximately 0.60 Tg lower than previously estimated, which corresponds to 17% reduction in the cold season biospheric emissions. This reduction is partly compensated by increased anthropogenic emissions in the same area (0.23 Tg), and the results also indicates that the anthropogenic emissions could have even larger contribution in cold season than estimated here.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2021

Improved ELMv1-ECA simulations of zero-curtain periods and cold-season CH 4 and CO 2 emissions at Alaskan Arctic tundra sites

Field measurements have shown that cold-season methane (CH 4 ) and carbon dioxide (CO 2 ) emissions contribute a substantial portion to the annual net carbon emissions in permafrost regions. However, most earth system land models do not accurately reproduce cold-season CH 4 and CO 2 emissions, especially over the shoulder (i.e., thawing and freezing) seasons. Here we use the Energy Exascale Earth System Model (E3SM) land model version 1 (ELMv1-ECA) to tackle this challenge and fill the knowledge gap of how cold-season CH 4 and CO 2 emissions contribute to the annual totals at Alaska Arctic tundra sites. Specifically, we improved the ELMv1-ECA soil water phase-change scheme, environmental controls on microbial activity, and the methane module. Results demonstrate that both soil temperature and the duration of zero-curtain periods (i.e., the fall period when soil temperatures linger around 0°C) simulated by the updated ELMv1-ECA were greatly improved; e.g., the mean absolute error (MAE) in zero-curtain durations at 12 cm depth was reduced by 62 % on average. Furthermore, the MAEs of simulated cold-season carbon emissions at three tundra sites were improved by 72 % and 70 % on average for CH 4 and CO 2 , respectively. Overall, CH 4 emitted during the early cold season (September and October), which often includes most of the zero-curtain period in Arctic tundra, accounted for more than 50 % of the total emissions throughout the entire cold season (September to May) in the model, compared with around 49.4 % (43 %–58 %) in observations. From 1950 to 2017, both CO 2 emissions during the zero-curtain period and during the entire cold season showed increasing trends, for example, of 0.17 and 0.36 gC m -2 yr -1 at Atqasuk. This study highlights the importance of zero-curtain periods in facilitating cold-season CH 4 and CO 2 emissions from tundra ecosystems.

58 GEOSCIENCES↗

DOE OSTI2020

Investigation of Process Emissions during Thermal Cutting of Clad Metals from the Nuclear Sector - 20183

Typically, reactor pressure vessels as well as steam generators comprising low alloyed steel with a cladding of stainless steel. Recently the permissible values for Cr (VI) in the air of the working areas have been reduced in Germany from 100 μg/m{sup 3} to 1 μg/m{sup 3} air. This results in the danger that even with low-alloy steel with claddings these limit values would be exceeded when using flame cutting technologies. In order to ensure compliance with the permissible limit values, exhaust gas systems with gas cleaning measures are provided. The process emission test shall replace the assumptions required for the design of these systems with measured values. NUKEM Technologies Engineering Services GmbH (NUKEM) has chosen autogenous flame cutting as an example of a thermal cutting system for process emission testing, as there are no proven values in the literature for the Cr (VI) and NiOx emissions produced. The autogenous flame cutting can be used for a variety of cutting tasks within decommissioning projects. In order to simulate the material to be cut, mock ups were generated and cut from information about the material specification for the reactor pressure vessel from existing nuclear power plants including possible claddings. The cutting length needed for analysis in the test will be maximum 100 mm. The airborne emissions from the thermal cutting process will be captured and analyzed as follows: - Dust emission: The generated particles will be collected by a hood equipped with strong suction device and suitable filter elements. The resulting filter is gravimetrically measured before and after the tests. - Particle Size Distribution: The airborne particle size distribution measurement will result in figures for the size and number of particles arising from the thermal cutting process. - Gas Analysis: The gas analysis enables the determination of e.g. CO{sub 2}, CO, O{sub 3}, NO, NO{sub 2}. - Cr (VI) and NiOx Analysis: For the Cr (VI) and NiOx analysis, samples of the filter residue will be taken. As a result Cr (VI) in relation to total Cr as well as the Ni content will be determined by ICP-optically emission spectroscopy and put in relation to the total dust amount. The process emissions test itself as well as the necessary gas analyses and spectroscopic analyses were carried out at the Institute of Materials Science (IW) of Leibniz Universitaet Hannover (LUH). The results of the process emission tests are used to confirm the design of the gas cleaning systems. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

DOE OSTI2022

Operational Emissions Accounting for Commercial Buildings

Buildings account for 30% of greenhouse gas emissions in the US. In order to aid in better decisions that reduce emissions from building operations, accurate emissions accounting is important. This report reviews existing operational GHG emission accounting approaches, frameworks, and data sources. We present the results of testing emissions accounting frameworks and emission factors with example data from two buildings and provide recommendations while using an emissions accounting framework.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

DOE OSTI2023

Black carbon emissions from modern automated cordwood stoves for space heating

Wood burning stove design is improving as regulation become stricter for particulate matter emissions. Here, this study describes results of black carbon (BC) emissions from three modern automated wood stoves when tested in common failure modes using a test protocol that included cold-starts, high and low fuel loading densities, and use of overly large pieces of fuel. Emission sampling was performed using a dilution sampling system in tandem with an aethalometer to measure BC with high time resolution. Results show that the time-weighted average BC emission rates were 0.91, 4.30, and 1.74 g/h for the three stoves tested (A, B, and C respectively), the values, both higher and lower than the United States 2020 certification test emission limit of 2.5 g/h. The results demonstrate good performance overall, given the rigorous nature of the testing protocol used. The aethalometer data showed that the performance was relatively poor during cold-start, when the fuel was ignited and combusted without a coalbed, and when stoves failed to optimize air delivery due to specific loading and output conditions. During the cold-start test section, the average BC emission rate was seven times higher than the overall average for Stove A, 10 times above the average for Stove B, and two times above the average emission rate for Stove C. Calculations of the Average Angstrom Absorption Exponent (AAE) of the exhaust aerosol showed little correlation with BC concentration. The results show that automation results in a quantifiable reduction in particular BC emissions.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

DOE OSTI2022

Volatile organic compound emissions from 4D printing: Effects of material composition and external stimulus

4D printing of stimuli-responsive materials extends 3D printing by enabling the fabricated structures to transform their shapes and properties over time in response to external stimuli. Numerous research efforts have been dedicated to developing new smart materials, enhancing material printability, and ensuring time-evolving properties. Meanwhile, the use of smart materials and external stimuli in 4D printing has introduced the possibility of air emissions that can potentially deteriorate the indoor air quality at the workplace and pose continuous health hazards to users during the production and use phases. These potential air emissions caused by 4D printing have not yet been assessed in current literature, leading to unknown occupational hazards and human health effects. This study focuses on stereolithography-based 4D printing with constrained thermo-mechanics and builds an emission model to quantify the volatile organic compound emissions from printing, shape programming, and shape recovery stages. The established model mathematically links the emission characteristics with material compositional design and stimuli-response mechanisms. Additionally, shape fixity and recovery abilities are considered to analyze the trade-off between the air emissions and stimuli-response performance of 4D printed parts. Case study results suggest that the methacrylate-based thermo-responsive material with higher glass transition temperature leads to higher air emissions, surpassing the permissible exposure level in the indoor environment. By altering the thermo-temporal conditions, a 61.29% reduction in emission yield can be achieved while ensuring a satisfactory shape memory performance.

36 MATERIALS SCIENCE↗

DOE OSTI2025

Depth-dependent links between microbial taxa and nitrous oxide emissions in a long-term cotton cropping system employing soil health practices

Long-term management practices can shape soil microbial communities in ways that influence nitrogen (N) dynamics and nitrous oxide (N 2 O) emissions. We leverage a 41-year continuous cotton cropping experiment with contrasting tillage, cover cropping, and N fertilization regimes to investigate how these long-term strategies influence soil microbial communities and their associations with N 2 O fluxes during the cotton growing season. Using 16S rRNA gene metabarcoding, we assessed microbial composition in surface and subsurface soils and evaluated its relationship with temporal N 2 O emissions. Among the management practices, N fertilization – a known driver of N 2 O emissions – had the strongest effect on microbial community composition and was linked to a greater number of taxa correlated to N 2 O emissions, particularly in surface soils. Soil pH emerged as a key variable influencing microbial structure across depth and was negatively associated with both N 2 O emissions and microbial composition in the surface layers of fertilized soils. In total, 57 archaeal/bacterial taxa were correlated with N 2 O fluxes, but only seven were shared across depths, suggesting distinct microbial contributors in surface and subsurface soils. Several of these taxa have been previously reported to be associated with N and C cycling processes such as nitrate respiration or carbon turnover, indicating functional context to their correlation with N 2 O fluxes. Temporal shifts in the abundance of key taxa aligned with seasonal peaks in N 2 O emissions, notably in early and late August, and were most pronounced under conventional tillage, hairy vetch cover cropping, and N fertilization. While 16S-based associations cannot confirm functional gene presence or activity, these findings demonstrate that long-term fertilization and associated soil acidification are dominant drivers of microbial shifts linked to N 2 O emissions and highlight the importance of accounting for depth-specific and seasonal microbial dynamics when evaluating management impacts on greenhouse gas emissions.

16S rRNA gene sequencing↗

DOE OSTI2020

Life cycle greenhouse gas emissions and energy use of polylactic acid, bio-derived polyethylene, and fossil-derived polyethylene

Bioplastics recently have become an attractive, viable, and popular alternative to conventional petroleum-based plastics, with the hope that replacing fossil-derived plastics with renewable alternatives will reduce greenhouse gas (GHG) emissions and fossil energy consumption (FEC). The bioplastic industry is encouraging creative designs and enhanced properties such as biodegradability, which is considered a sustainable solution for waste plastic management. However, biodegradability also means that carbon in the product is emitted to the atmosphere as GHG emissions. In this paper, a life cycle analysis (LCA) of biodegradable polylactic acid (PLA) and bio-polyethylene (bio-PE) plastics was conducted to understand the environmental effects of these bioplastics from feedstock production to product end-of-life (EOL). In particular, emissions from biodegradability (EOL emissions) are accounted for. The results were compared to those of conventional fossil-based plastics such as high-density polyethylene (HDPE) and low-density polyethylene (LDPE). Results showed that the lowest GHG emissions (-1.0 and 1.7 kg CO 2 e per kg for bio-PE and PLA with no biodegradation, respectively) and FEC (29 and 46 MJ per kg of bio-PE and PLA, respectively) were achieved with bio-derived plastics, particularly bio-PE plastic. However, despite the benefits of biogenic carbon uptake, when landfill and composting emissions were considered for the PLA pathway, the life cycle emissions of PLA increase significantly, from 16% to 163% depending on the biodegradation condition, compared to the case where there is no degradation in the landfill. This study also contributed to understand the effects on the GHG emissions of biodegradability in landfill and composting scenarios, regional electricity mix, and plastics manufacturing technologies. (C) 2020 The Authors. Published by Elsevier Ltd.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2025

Indicators of carbon alteration (ICAs) suggest patterns in reservoir methane emissions

Reservoir operations influence emissions via multiple causal pathways. In this paper, we quantify indicators of carbon alteration (ICAs) focused on methane. ICAs were chosen to reflect the potential for methane emission along four causal pathways: 1) water column mixing, 2) wet-dry cycles in sediment, 3) sediment redistribution, and 4) vegetation. We developed algorithms to calculate ICAs for three reservoirs along a longitudinal gradient in the Tennessee River basin of the southeast US. The ICAs revealed interesting longitudinal patterns. Indicators of both methane production and destruction increased downstream. The potential for ebullitive methane emissions driven by sub-daily water level fluctuations and emissions mediated by vegetation were higher in downstream mainstem reservoirs than in the upstream tributary reservoir. Along the remaining two pathways, longitudinal patterns were equivocal (sediment pathway) or suggested decreased emissions downstream (water-column mixing). We also observed seasonal patterns and, by combining ICAs, inferred times when ramping could be achieved with lower risk of emissions. The ICAs demonstrated here are the first step in quantifying mechanistic relationships between reservoir operation and methane emissions. In future, they may lead to improved operations in reservoir cascades and regional-scale estimates of emissions that account for differences among reservoirs.

Greenhouse gases↗

DOE OSTI2022

Light-Duty Vehicle Transportation Policy and Implication on Greenhouse Gas Emissions

The transportation sector accounts for 16% of global greenhouse gas (GHG) emissions and is under formidable pressure to decarbonize. With a growing number of countries making commitments to achieve carbon neutrality or “net-zero” emissions within the next few decades, it is imperative for transportation researchers and policymakers to understand the viable pathways towards achieving carbon neutrality for light-duty transport. This chapter discusses the transportation policies and GHG emissions of the three largest markets in the world—the U.S., China, and the European Union. The life cycle GHG emissions of various vehicle technologies are evaluated while highlighting the regional and temporal differences. We then use market penetration and fleet models, developed specifically for each market, to comprehensively assess the light-duty transport energy demand and GHG emissions under various scenarios. The modeling results show that battery electric vehicles (BEVs) will increase in market share, but internal combustion engine vehicles (ICEV) will continue to dominate the passenger vehicle stock in the next 20 years under most scenarios. Improving ICEV efficiency can play a critical role in meeting GHG regulations in the near- and medium-term. BEVs, whose GHG emissions are highly dependent on the source of electricity generation, will play an essential role in the long-term as the electric grid becomes cleaner. In summary, transportation policies should be technology agnostic and consider emissions based on the whole life cycle. Moreover, a holistic approach to reducing transportation GHG emissions is key to achieving global environmental goals.

Ou, Shawn↗

DOE OSTI2021

Large Methane Emissions From the Pantanal During Rising Water‐Levels Revealed by Regularly Measured Lower Troposphere CH 4 Profiles

Abstract The Pantanal region of Brazil is the largest seasonally flooded tropical grassland and, according to local chamber measurements, a substantial CH 4 source. CH 4 emissions from wetlands have recently become of heightened interest because global atmospheric 13 CH 4 data indicate they may contribute to the resumption of atmospheric CH 4 growth since 2007. We have regularly measured vertical atmospheric profiles for 2 years in the center of the Pantanal with the objectives to obtain an estimate of CH 4 emissions using an atmospheric approach, and provide information about flux seasonality and its relation to controlling factors. Boundary layer‐free troposphere differences observed in the Pantanal are large compared to other wetlands. Total emissions based on a planetary boundary layer budgeting technique are 2.0–2.8 TgCH 4 yr −1 (maximum flux ∼0.4 gCH 4 m −2 d −1 ) while those based on a Bayesian inversion using an atmospheric transport model are ∼3.3 TgCH 4 yr −1 . Compared to recent estimates for Amazonia (∼41 ± 3 TgCH 4 yr −1 , maximum flux ∼0.3 gCH 4 m −2 d −1 ) these emissions are not that large. Our Pantanal data suggest a clear flux seasonality with CH 4 being released in large amounts just after water levels begin to rise again after minimum levels have been reached. CH 4 emissions decline substantially once the maximum water level has been reached. While predictions with prognostic wetland CH 4 emission models agree well with the magnitude of the fluxes, they disagree with the phasing. Our approach shows promise for detecting and understanding longer‐term trends in CH 4 emissions and the potential for future wetlands CH 4 emissions climate feedbacks.

Gloor, M.↗

DOE OSTI2022

Double-crowned 2D semiconductor nanoplatelets with bicolor power-tunable emission

Nanocrystals (NCs) are now established building blocks for optoelectronics and their use as down converters for large gamut displays has been their first mass market. NC integration relies on a combination of green and red NCs into a blend, which rises post-growth formulation issues. A careful engineering of the NCs may enable dual emissions from a single NC population which violates Kasha’s rule, which stipulates that emission should occur at the band edge. Thus, in addition to an attentive control of band alignment to obtain green and red signals, non-radiative decay paths also have to be carefully slowed down to enable emission away from the ground state. Here, we demonstrate that core/crown/crown 2D nanoplatelets (NPLs), made of CdSe/CdTe/CdSe, can combine a large volume and a type-II band alignment enabling simultaneously red and narrow green emissions. Moreover, we demonstrate that the ratio of the two emissions can be tuned by the incident power, which results in a saturation of the red emission due to non-radiative Auger recombination that affects this emission much stronger than the green one. Finally, we also show that dual-color, power tunable, emission can be obtained through an electrical excitation.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

DOE OSTI2024

Boreal–Arctic wetland methane emissions modulated by warming and vegetation activity

Abstract Wetland methane (CH 4 ) emissions over the Boreal–Arctic region are vulnerable to climate change and linked to climate feedbacks, yet understanding of their long-term dynamics remains uncertain. Here, we upscaled and analysed two decades (2002–2021) of Boreal–Arctic wetland CH 4 emissions, representing an unprecedented compilation of eddy covariance and chamber observations. We found a robust increasing trend of CH 4 emissions (+8.9%) with strong inter-annual variability. The majority of emission increases occurred in early summer (June and July) and were mainly driven by warming (52.3%) and ecosystem productivity (40.7%). Moreover, a 2 °C temperature anomaly in 2016 led to the highest recorded annual CH 4 emissions (22.3 Tg CH 4 yr −1 ) over this region, driven primarily by high emissions over Western Siberian lowlands. However, current-generation models from the Global Carbon Project failed to capture the emission magnitude and trend, and may bias the estimates in future wetland CH 4 emission driven by amplified Boreal–Arctic warming and greening.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2023

Multiple emission components in the Cygnus cocoon detected from Fermi -LAT observations

Star-forming regions may play an important role in the life cycle of Galactic cosmic rays (CRs), notably as home to specific acceleration mechanisms and transport conditions. Gamma-ray observations of Cygnus X have revealed the presence of an excess of hard-spectrum gamma-ray emission, possibly related to a cocoon of freshly accelerated particles. We seek an improved description of the gamma-ray emission from the cocoon using ~13 yr of observations with the Fermi-Large Area Telescope (LAT) and use it to further constrain the processes and objects responsible for the young CR population. We developed an emission model for a large region of interest, including a description of interstellar emission from the background population of CRs and recent models for other gamma-ray sources in the field. Thus, we performed an improved spectro-morphological characterisation of the residual emission including the cocoon. The best-fit model for the cocoon includes two main emission components: an extended component FCES G78.74+1.56, described by a 2D Gaussian of extension r 68 = 4.4° ± 0.1° -0.1° +0.1° and a smooth broken power law spectrum with spectral indices 1.67 ± 0.05 -0.01 +0.02 and 2.12 ± 0.02 -0.01 +0.00 below and above 3.0 ± 0.6 -0.2 +0.0 GeV, respectively; and a central component FCES G80.00+0.50, traced by the distribution of ionised gas within the borders of the photo-dissociation regions and with a power law spectrum of index 2.19 ± 0.03 -0.01 +0.00 that is significantly different from the spectrum of FCES G78.74+1.56. An additional extended emission component FCES G78.83+3.57, located on the edge of the central cavities in Cygnus X and with a spectrum compatible with that of FCES G80.00+0.50, is likely related to the cocoon. For the two brightest components FCES G80.00+0.50 and FCES G78.74+1.56, spectra and radial-azimuthal profiles of the emission can be accounted for in a diffusion-loss framework involving one single population of non-thermal particles with a flat injection spectrum. Particles span the full extent of FCES G78.74+1.56 as a result of diffusion from a central source, and give rise to source FCES G80.00+0.50 by interacting with ionised gas in the innermost region. For this simple diffusion-loss model, viable setups can be very different in terms of energetics, transport conditions, and timescales involved, and both hadronic and leptonic scenarios are possible. The solutions range from long-lasting particle acceleration, possibly in prominent star clusters such as Cyg OB2 and NGC 6910, to a more recent and short-lived release of particles within the last 10–100 kyr, likely from a supernova remnant. The observables extracted from our analysis can be used to perform detailed comparisons with advanced models of particle acceleration and transport in star-forming regions.

79 ASTRONOMY AND ASTROPHYSICS↗

DOE OSTI2026

Probing jet base emission of M87* with the 2021 Event Horizon Telescope observations

We investigate the presence and spatial characteristics of the jet base emission in M87* at 230 GHz, enabled by the significantly enhanced (u,v) coverage in the 2021 Event Horizon Telescope (EHT) observations. The integration of the 12−m Kitt Peak Telescope (USA) and NOEMA (France) stations into the array introduces two critical intermediate-length baselines to SMT (USA) and IRAM 30−m (Spain), providing sensitivity to emission structures at spatial scales of ∼250 μas and ∼2500 μas (∼ 0.02 pc and ∼ 0.02 pc). Without these new baselines, previous EHT observations of the source in 2017 and 2018 lacked the capability to constrain emission on large scales, where a “missing flux” of order ∼1 Jy is expected to reside. To probe these scales, we analyzed closure phases–robust against station-based gain calibration errors–and model the jet base emission using a simple Gaussian component offset from the compact ring emission at spatial separations > 100 μas. Our analysis revealed a Gaussian feature centered at (ΔRA ≈ 320 μ as, ΔDec. ≈ 60 μ as), projected separation of ≈ 5500 AU, with an estimated flux density of only ∼60 mJy, implying that most of the missing flux identified in previous EHT studies had to originate from different, larger scales. Brighter emission at the relevant spatial scales is firmly ruled out, and the data do not favor more complex models. This component aligns with the inferred position of the large-scale jet and is therefore physically consistent with the emission of the jet base. While our findings point to detectable jet base emission at 230 GHz, the limited coverage provided by only two intermediate baselines limits our ability to robustly reconstruct its morphology. Consequently, we treated the recovered Gaussian as an upper limit on the jet base flux density. Future EHT observations with expanded intermediate baseline coverage will be essential to constrain the structure and nature of this component with higher precision.

accretion, accretion disks↗

DOE OSTI2022

Long-term trends of impacts of global gasoline and diesel emissions on ambient PM 2.5 and O 3 pollution and the related health burden for 2000–2015

Global economic development and urbanization during the past two decades have driven the increases in demand of personal and commercial vehicle fleets, especially in developing countries, which has likely resulted in changes in year-to-year vehicle tailpipe emissions associated with aerosols and trace gases. However, long-term trends of impacts of global gasoline and diesel emissions on air quality and human health are not clear. In this study, we employ the Community Earth System Model in conjunction with the newly developed Community Emissions Data System as anthropogenic emission inventory to quantify the long-term trends of impacts of global gasoline and diesel emissions on ambient air quality and human health for the period of 2000–2015. Global gasoline and diesel emissions contributed to regional increases in annual mean surface PM 2.5 (particulate matter with aerodynamic diameters ≤2.5 μm) concentrations by up to 17.5 and 13.7 µg m –3 , and surface ozone (O 3 ) concentrations by up to 7.1 and 7.2 ppbv, respectively, for 2000–2015. However, we also found substantial declines of surface PM 2.5 and O 3 concentrations over Europe, the US, Canada, and China for the same period, which suggested the co-benefits of air quality and human health from improving gasoline and diesel fuel quality and tightening vehicle emissions standards. Globally, we estimate the mean annual total PM 2.5- and O 3 -induced premature deaths are 139 700–170 700 for gasoline and 205 200–309 300 for diesel, with the corresponding years of life lost of 2.74–3.47 and 4.56–6.52 million years, respectively. Diesel and gasoline emissions create health-effect disparities between the developed and developing countries, which are likely to aggravate afterwards.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2026

N 2 Onet: a global collaborative network facilitating advances in measurement, modeling, and mitigation of agricultural soil nitrous oxide emissions

Nitrogen (N) fertilizer supports global food production, but its use and overuse drive emissions of nitrous oxide (N 2 O), a potent and long-lived greenhouse gas. Understanding the drivers of N 2 O fluxes remains elusive, making it difficult to predict emissions in time and space and to develop and evaluate ways to lower emissions through management. Major scientific uncertainties underlying the understanding of the drivers of N 2 O fluxes identified in a workshop of N 2 O emissions experts include poor process-based understanding of controls on soil N 2 O emissions in the field; insufficient data to reduce uncertainty in N 2 O budgets from the field to regional scales, including N 2 O emission measurements and importantly, field-scale N balances; and high uncertainty in model predictions of soil N 2 O emissions across environmental and management conditions. To reduce these uncertainties, we present the concept of N 2 Onet, a global collaborative initiative to accelerate advances in N 2 O measurement, analyses, and mitigation. N 2 Onet will serve as an observational network of supersites with multi-scale measurements; a database hub for N 2 O flux and ancillary data; and a catalyst for community building, information sharing, and training. By coalescing and coordinating the global community of researchers, N 2 Onet will provide a roadmap for reducing N 2 O emissions from agriculture worldwide.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2022

Lyman alpha and Lyman continuum emission of Mg Ⅱ -selected star-forming galaxies

We present observations with the Cosmic Origins Spectrograph onboard the Hubble Space Telescope of seven compact low-mass star-forming galaxies at redshifts, z, in the range 0.3161–0.4276, with various O 3 Mg 2 = [O iii] λ5007/Mg ii λ2796+2803 and Mg 2 = Mg ii λ2796/Mg ii λ2803 emission-line ratios. We aim to study the dependence of leaking Lyman continuum (LyC) emission on the characteristics of Mg ii emission together with the dependencies on other indirect indicators of escaping ionizing radiation. LyC emission with escape fractions f esc (LyC) = 3.1–4.6 percent is detected in four galaxies, whereas only 1σ upper limits of f esc (LyC) in the remaining three galaxies were derived. A strong narrow Lyα emission line with two peaks separated by V sep ~ 298–592 km s -1 was observed in four galaxies with detected LyC emission and very weak Lyα emission is observed in galaxies with LyC non-detections. Our new data confirm the tight anticorrelation between f esc (LyC) and V sep found for previous low-redshift galaxy samples. V sep remains the best indirect indicator of LyC leakage among all considered indicators. It is found that escaping LyC emission is detected predominantly in galaxies with Mg 2 ≳ 1.3. A tendency of an increase of f esc (LyC) with increasing of both the O 3 Mg 2 and Mg 2 is possibly present. However, there is substantial scatter in these relations not allowing their use for reliable prediction of f esc (LyC).

79 ASTRONOMY AND ASTROPHYSICS↗