Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “electronic band structure”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Narrowing the band gap and suppressing electron–hole recombination in β-Fe 2 O 3 by chlorine doping

Here, the effects of halogen (F, Cl, Br, I, and At) doping in the direct-band-gap β-Fe 2 O 3 semiconductor on its band structures and electron–hole recombination have been investigated by density functional theory. Doping Br, I, and At in β-Fe 2 O 3 leads to transformation from a direct-band-gap semiconductor to an indirect-band-gap semiconductor because their atomic radii are too large; however, F- and Cl-doped β-Fe 2 O 3 remain as direct-band-gap semiconductors. Due to the deep impurity states of the F dopant, this study focuses on the effects of the Cl dopant on the band structures of β-Fe 2 O 3 . Two impurity levels are introduced when Cl is doped into β-Fe 2 O 3 , which narrows the band gap by approximately 0.3 eV. After doping Cl, the light-absorption edge of β-Fe 2 O 3 redshifts from 650 to 776 nm, indicating that its theoretical solar to hydrogen efficiency for solar water splitting increases from 20.6% to 31.4%. In addition, the effective mass of the holes in halogen-doped β-Fe 2 O 3 becomes significantly larger than that in undoped β-Fe 2 O 3 , which may suppress electron–hole recombination.

30 DIRECT ENERGY CONVERSION↗
DOE OSTI2022

Evolution of structure and transport properties of the Ba 8 Cu 16 P 30 clathrate-I framework with the introduction of Ga

Two type-I clathrates were synthesized by introducing Ga into the framework of the Ba 8 Cu 16 P 30 type-I clathrate. The introduction of minute amounts of Ga, 1.9% Ga/M total (where M total = Cu + Ga), resulted in the disturbance of the completely ordered Pbcn superstructure of Ba 8 Cu 16 P 30 . Ba 8 Cu 15.43(2) Ga 0.3 P 30.26(3) crystallizes in a partially ordered orthorhombic Pmna clathrate-I superstructure with five out of 15 framework sites being jointly occupied by metal+phosphorus. Increasing the Ga content resulted in all framework sites being occupied by metal + phosphorus in the archetype cubic Pm n clathrate-I crystal structure of Ba 8 Cu 14.5(3) Ga 1.3 P 30.2(4) with 8.2% Ga/M total . A combination of energy dispersive x-ray spectroscopy, inductively coupled plasma mass spectroscopy, and single crystal x-ray diffraction was used to determine the structures alongside the compositions. The positional disorder was verified by 31 P solid state NMR spectroscopy. Characterization of the transport properties indicated that the Ga-substituted samples exhibit higher Seebeck coefficients and electrical resistivities compared to its pristine counterpart, in line with the expected reduction of the hole concentration due to Ga/Cu substitution. Moderate improvements in the thermoelectric power factor and overall figure-of-merit were observed for samples with 6.9% and 3.8% Ga/M total as compared to those for the pristine Ba 8 Cu 16 P 30 clathrate. Finally, band structure calculations shed light on how Ga substitution affects the electronic structure and thermoelectric properties of studied clathrates.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Design of InGaN-ZnSnGa 2 N 4 quantum wells for high-efficiency amber light emitting diodes

A novel type-II InGaN-ZnSnGa 2 N 4 quantum well (QW) structure is proposed based on recent experimental achievements for the successful epitaxy of ZnSnN 2 -GaN alloys and the determination of their band offsets with GaN. The simulation results indicate that this structure is promising as the active region for high-efficiency InGaN-based amber (λ ~ 590 nm) light-emitting diodes (LEDs). The hole wavefunction in the valence band is better confined with the insertion of a monolayer scale of ZnSnGa 2 N 4 into the InGaN QW while the electron wavefunction in the conduction band is better confined with the incorporation of an AlGaN layer in the GaN quantum barrier. The band structure of the InGaN-ZnSnGa 2 N 4 QW is numerically simulated based on the experimentally measured band offsets between ZnSnGa 2 N 4 and GaN. With the InGaN-ZnSnGa 2 N 4 QW design, a low In content (20%) is required in the InGaN layer to reach a peak emission wavelength of ~590 nm, yet an In composition of 25% is needed to reach the same emission wavelength for a conventional InGaN QW with the same layer thicknesses. Moreover, the electron-hole wavefunction overlap (Гe1-hh1) for the InGaN-ZnSnGa 2 N 4 QW design reaches 18% for an emission wavelength at ~590 nm. This result is much improved over the conventional InGaN QW overlap of 5% emitting at the same wavelength. The increase in electron-hole wavefunction overlap results in an approximately 14 times enhancement in the predicted spontaneous emission radiative recombination rate of the InGaN-ZnSnGa 2 N 4 QW as compared to that of the conventional InGaN QW. This InGaN-ZnSnGa 2 N 4 QW structure design can be promising to pave a new way to achieve high efficiency amber LEDs.

42 ENGINEERING↗
DOE OSTI2020

Electronic structure and thermoelectric properties of CoAsSb with post-DFT approaches

Here, we study the electronic structure and thermoelectric properties of recently synthesized CoAsSb. The calculated bandgap becomes more accurate for increasingly-complex electronic structure methods: generalized gradient approximation, hybrid functionals, selfconsistent linearized quasiparticle GW method (LQSGW), and LQSGW with simplified vertex corrections. By equating the bandgaps of each method from a rigid shift of the bands, we evaluate the contributions made to thermoelectric properties beyond the bandgap. In doing so, we evaluate the efficacy of a commonpractice: a rigid shift applied to less-costly electronic structure methods in order to gain some accuracy of the more-costly methods. We find that while the shift made the Seebeck coefficients much closer to one another than from the original electronic structures, there remain differences in the Goldsmid-Sharp (thermoelectric) bandgap between the methods and from the intended electronic bandgap. Additionally, some lasting differences in temperature dependence remain between the methods.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2022

Atomic-Layer-Deposited Aluminum Oxide Thin Films Probed with X-ray Scattering and Compared to Molecular Dynamics and Density Functional Theory Models

A better understanding of amorphous aluminum oxide’s structure and electronic properties is obtained through combined experimental and computational approaches. Grazing incidence X-ray scattering measurements were carried out on aluminum oxide thin films grown using thermal atomic layer deposition. The corresponding pair distribution functions (PDFs) showed structures similar to previously reported PDFs of solid-state amorphous alumina and molten alumina. Structural models based on crystalline alumina polymorphs (PDFgui) and amorphous alumina (molecular dynamics, MD) were examined for structural comparisons to the experimental PDF data. Smaller MD models were optimized and verified against larger models to allow for quantum chemical electronic structure calculations. The electronic structure of the amorphous alumina models yields additional insight into the band structure and electronic defects present in amorphous alumina that are not present in crystalline samples.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Pinning of energy transitions of defects, complexes, and surface states in AlGaN alloys

In this work, we determine the dependence of the defect transition energies, electronic bands, and surface charge neutrality levels in AlGaN. With Vacuum level as reference, we show that energy transitions of localized defects and the surface Fermi level are independent of the alloy composition as electronic bands diverge with the increase in the bandgap as a function of alloy composition. The invariance of localized states on the alloy composition creates a convenient internal reference energy with respect to which other energy states may be measured. We demonstrate a higher generality to the universality rule with the independence of deep transition states of otherwise shallow donor type defects [(+1/+3) transition for VN] and defect complexes (C N +Si III ) in addition to the earlier predicted independent nature of mid-gap states when they are either the antibonding state between cationic impurities and host anion or acceptors at anion sites.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Electronic and catalytic engineering in two-dimensional vdW metal–organic frameworks through alloying

Bimetallic metal-organic framework (MOF s ) alloys, in which heterogeneous metal clusters are incorporated into their backbone, are capable of highly selective separations and catalysis. Due to limitations in our fundamental understanding of their alloying, however, established methods result in phase-separated or amorphous two-dimensional (2D) MOF s or lack precise control over alloy ratios. Here, our results demonstrate 2D MOF alloys where metal cation ratios (M 1 and M 2 ) in M 1 xM 2 1-x BDC (M 1 or M 2 = Zn, Cu, Ni, Co, Fe, Mn) can be engineered on demand by controlling the metal salt dissociation constants. Resulting MOF alloys exhibit a highly 2D nature with excellent crystallinity and minute control over metal cation ratios. Overall, our experimental and theoretical results show that their electronic bandgaps and photoexcited carrier lifetimes can be engineered by metal cation alloying. Interestingly, 2D alloyed MOF s enable high-efficiency photo-catalytic water reduction performance in Co/Ni MOF alloys owing to the spatially separated metal clusters in 2D MOF alloys.

2D materials↗
DOE OSTI2022

A first-principles investigation of point defect structure and energetics in ThO 2

The structure and energetics of charged point defects in thorium dioxide (ThO 2 ) have been investigated using the density functional theory (DFT) and phonon simulations. DFT simulations were performed under both zero-pressure and constant volume conditions. Termed as the free volume change of the point defects, the change in volume of the supercell has been computed in the zero-pressure case. Supercell expansion was observed with the increase of the (nominal) charge state of anion (O) interstitials and cation (Th) vacancies from neutral to its maximum. On the contrary, contraction of the supercell has been observed with anion vacancies and cation interstitials as the defect charge increases. The supercell volume change with respect to the charge state has been correlated with the resulting defect energetics. It has been observed that, as the defect charge increased, the internal energy and entropy of defect formation of the cation vacancies and anion interstitials were found to increase, while that of the cation interstitials and anion vacancies decreased. Here, the temperature dependence of internal energy and entropy has also been examined. It was found that, as the temperature increases, the internal energies of the formation of cation vacancies and anion interstitials decrease, while those of the cation interstitials and anion vacancies increase. An opposite observation is seen for the entropies of formation defects when above room temperatures.

42 ENGINEERING↗
DOE OSTI2023

Engineering Robust Metallic Zero-Mode States in Olympicene Graphene Nanoribbons

Metallic graphene nanoribbons (GNRs) represent a critical component in the toolbox of low-dimensional functional materials technology serving as 1D interconnects capable of both electronic and quantum information transport. The structural constraints imposed by on-surface bottom-up GNR synthesis protocols along with the limited control over orientation and sequence of asymmetric monomer building blocks during the radical step-growth polymerization have plagued the design and assembly of metallic GNRs. Here, we report the regioregular synthesis of GNRs hosting robust metallic states by embedding a symmetric zero-mode (ZM) superlattice along the backbone of a GNR. Tight-binding electronic structure models predict a strong nearest-neighbor electron hopping interaction between adjacent ZM states, resulting in a dispersive metallic band. First-principles density functional theory-local density approximation calculations confirm this prediction, and the robust, metallic ZM band of olympicene GNRs is experimentally corroborated by scanning tunneling spectroscopy.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Rise and fall of Mott insulating gaps in YNiO 3 paramagnets as a reflection of symmetry breaking and remaking

The YNiO 3 nickelate is a paradigm d-electron oxide that manifests the intriguing temperature-mediated sequence of three phases transitions from (i) magnetically ordered insulator to (ii) paramagnetic (PM) insulator and then to (iii) PM metal. Such phenomena raised the question of the nature of the association of magnetism and structural symmetry breaking with the appearance in (i) and (ii) and disappearance in (iii) of insulating band gaps. It is demonstrated here that first-principles mean-field–like density-functional theory (DFT), driven by molecular dynamics temperature evolution, can describe not only the origin of the magnetically long-range ordered insulating phase (i), but also the creation of an insulating paramagnet (ii) that lacks spin- long-range order, and of a metallic paramagnet (iii) as temperature rises. This approach provides the patterns of structural and magnetic symmetry breaking at different temperatures, in parallel with band gaps obtained when the evolving geometries are used as input to DFT electronic band-structure calculations. This disentangles the complex interplay among spin, charge, and orbital degrees of freedom. Analysis shows that the success in describing the rise and fall of the insulating band gaps along the phase transition sequence is enabled by allowing sufficient flexibility in describing diverse local structural and magnetic motifs as input to DFT. This entails the use of sufficiently large supercells that allow expressing structural disproportionation of octahedra, as well as a description of PM phases as a distribution of local magnetic moments (rather than using a single averaged moment). It appears that the historic dismissal of mean-field–like DFT as being unable to describe such Mott-like transitions was premature, as it was based on consideration of averaged crystallographic unit cells, a description that washes out local symmetry-breaking motifs. The magnetically ordered insulating YNiO 3 phase (i) and the PM insulating phase (ii) result in DFT from allowing symmetry breaking, evident already by considering the athermal internal energy. In contrast, the PM metallic phase (iii) is formed thermally by smearing out thus weakening symmetry breaking. Analysis of snapshots of the different forms of structural vs magnetic symmetry breaking shows that only the loss of the polymorphous distribution of magnetic moments existing in (ii) causes the fall of the band gap, resulting in the metallic state in (iii). Finally, the interesting conclusion is that such a description of the rise [in phases (i) and (ii)] and fall [in phase (iii)] of the insulating gap does not rely on the traditional Mott-like strong correlation understanding, but on breaking and remaking of magnetic and structural symmetries reflected in energy lowering.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Dynamics of carrier injection through V-defects in long wavelength GaN LEDs

The efficiency of high-power operation of multiple quantum well (QW) light emitting diodes (LEDs) to a large degree depends on the realization of uniform hole distribution between the QWs. In long wavelength InGaN/GaN QW LEDs, the thermionic interwell hole transport is hindered by high GaN barriers. However, in polar LED structures, these barriers may be circumvented by the lateral hole injection via semipolar {$10\bar{1}1$} QWs that form on the facets of V-defects. The efficiency of such carrier transfer depends on the transport time since transport in the semipolar QWs is competed by recombination. In this work, we study the carrier transfer from the semipolar to polar QWs by time-resolved photoluminescence in long wavelength (green to red) LEDs. We find that the carrier transfer through the semipolar QWs is fast, a few tens of picoseconds with the estimated room temperature ambipolar diffusion coefficient of ∼5.5 cm 2 /s. With diffusion much faster than recombination, the hole transport from the p-side of the structure to the polar QWs should proceed without a substantial loss, contributing to the high efficiency of long wavelength GaN LEDs.

Crystallographic defects↗
DOE OSTI2024

Uncovering an Interfacial Band Resulting from Orbital Hybridization in Nickelate Heterostructures

The interaction of atomic orbitals at the interface of perovskite oxide heterostructures has been investigated for its profound impact on the band structures and electronic properties, giving rise to unique electronic states and a variety of tunable functionalities. In this study, we conducted an extensive investigation of the optical and electronic properties of epitaxial NdNiO 3 thin films grown on a series of single crystal substrates. Unlike films synthesized on other substrates, NdNiO 3 on SrTiO 3 (NNO/STO) gives rise to a unique band structure which features an additional unoccupied band situated above the Fermi level. Our comprehensive investigation, which incorporated a wide array of experimental techniques and density functional theory calculations, revealed that the emergence of the interfacial band structure is primarily driven by the orbital hybridization between Ti 3d orbitals of the STO substrate and O 2p orbitals of the NNO thin film. Furthermore, exciton peaks have been detected in the optical spectra of the NNO/STO film, attributable to the pronounced electron-electron (e-e) and electron-hole (e-h) interactions propagating from the STO substrate into the NNO film. Further, these findings underscore the substantial influence of interfacial orbital hybridization on the electronic structure of oxide thin-films, thereby offering key insights into tuning their interfacial properties.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Non-equilibrium states and interactions in the topological insulator and topological crystalline insulator phases of NaCd4As3

Topological materials are of great interest because they can support metallic edge or surface states that are robust against perturbations, with the potential for technological applications. Here, we experimentally explore the light-induced non-equilibrium properties of two distinct topological phases in NaCd4As3: a topological crystalline insulator (TCI) phase and a topological insulator (TI) phase. This material has surface states that are protected by mirror symmetry in the TCI phase at room temperature, while it undergoes a structural phase transition to a TI phase below 200 K. After exciting the TI phase by an ultrafast laser pulse, we observe a leading band edge shift of >150 meV that slowly builds up and reaches a maximum after ∼0.6 ps and that persists for ∼8 ps. The slow rise time of the excited electron population and electron temperature suggests that the electronic and structural orders are strongly coupled in this TI phase. It also suggests that the directly excited electronic states and the probed electronic states are weakly coupled. Both couplings are likely due to a partial relaxation of the lattice distortion, which is known to be associated with the TI phase. In contrast, no distinct excited state is observed in the TCI phase immediately or after photoexcitation, which we attribute to the low density of states and phase space available near the Fermi level. Our results show how ultrafast laser excitation can reveal the distinct excited states and interactions in phase-rich topological materials.

Angle-resolved photoemission spectroscopy↗
DOE OSTI2025

Topological solitons in square-root graphene nanoribbons controlled by electric fields

Conjugational defects, also known as solitons, play an important role in the electronic, magnetic, and optical properties of materials. Understanding solitons can uncover intriguing physics and provide insights for designing quantum materials with tailored band structures and electronic properties. Here we propose a framework to create and control solitons via topological phase transitions in a class of graphene nanoribbons (GNRs) called square-root GNRs, using a transverse electric field. To demonstrate the experimental feasibility, we design and synthesize a representative GNR with a bottom-up approach, with first-principles calculations revealing topological soliton states at the domain wall induced by the electric field. In conclusion, the framework introduced in this work can potentially enable direct manipulation of solitons and provide a platform to study them systematically.

36 MATERIALS SCIENCE↗
DOE OSTI2022

In-plasma photo-assisted etching of Si with chlorine aided by an external vacuum ultraviolet source

Photo-assisted etching of p-type Si was previously found to occur in a chlorine-containing, Faraday-shielded, inductively coupled plasma (ICP), and this was attributed to the vacuum ultraviolet (VUV) light generated by the plasma. Other causes for the very high etching rates were ruled out, including ion bombardment. In the present study, the substrate in the main Cl2/Ar ICP was subjected to extra VUV light that was generated in an independently controlled, auxiliary Ar/He ICP in tandem with the main ICP. The ICPs were separated by a tungsten mesh and a bundle of high-aspect-ratio quartz tubes in a honeycomb configuration. There was no measurable perturbation of the main plasma by the auxiliary plasma. The etching rate was found to be enhanced by 11%–51% with the additional VUV light provided by the auxiliary ICP. With absolute measurements of the auxiliary ICP photon flux at the sample surface, as described elsewhere, incredibly large etching yields of 90–240 Si atoms per photon were obtained. It is argued that etching is not a result of electron–hole pair formation but is instead ascribed to a photocatalytic chain reaction.

42 ENGINEERING↗
DOE OSTI2020

Monolayer 1T-LaN 2 : Dirac spin-gapless semiconductor of p -state and Chern insulator with a high Chern number

Two-dimensional transition-metal dinitrides have attracted considerable attention in recent years due to their rich magnetic properties. Here, we focus on rare-earth-metal elements and propose a monolayer of lanthanum dinitride with a 1T structural phase, 1T-LaN 2 . Using first-principles calculations, we systematically investigated the structure, stability, magnetism, and band structure of this material. It is a flexible and stable monolayer exhibiting a low lattice thermal conductivity, which is promising for future thermoelectric devices. Here, the monolayer shows the ferromagnetic ground state with a spin-polarized band structure. Two linear spin-polarized bands cross at the Fermi level forming a Dirac point, which is formed by the p atomic orbitals of the N atoms, indicating that monolayer 1T-LaN 2 is a Dirac spin-gapless semiconductor of p-state. When the spin–orbit coupling is taken into account, a large nontrivial indirect bandgap (86/354 meV) can be opened at the Dirac point, and three chiral edge states are obtained, corresponding to a high Chern number of C = 3, implying that monolayer 1T-LaN 2 is a Chern insulator. Importantly, this kind of band structure is expected to occur in more monolayers of rare-earth-metal dinitride with a 1T structural phase.

2D materials↗
DOE OSTI2024

Intricate short-range order in GeSn alloys revealed by atomistic simulations with highly accurate and efficient machine-learning potentials

GeSn alloys hold promise for silicon-compatible integrated applications in electronics, photonics, and topological quantum devices. However, understanding their intricate structures using density functional theory (DFT) calculations is hindered by spatiotemporal constraints. To overcome this limitation, we develop highly accurate and efficient machine-learning interatomic potentials based on a neuroevolution potential approach with farthest point sampling on a comprehensive DFT data set. The application of the developed machine-learning potential in large-scale atomistic simulations bridges the spatiotemporal gap between modeling and advanced characterizations, and facilitates the discovery of structural intricacies in GeSn alloys. Through extensive statistical sampling, we identify a type of short-range order (SRO) that is distinguished by both its structural signature and electronic band gap from the SRO structure previously predicted. Modeling based on a large simulation cell reveals the coexistence of nano SRO domains with various degrees of ordering, demonstrating a complex spatial heterogeneity of SRO structure. Finally, our study not only reinforces the significance of fine-level structural information in alloys, but it also constitutes an effective framework for exploring SRO in a broad range of complex alloys based on highly accurate and effective machine-learning potentials.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Electronic heat generation in semiconductors: Non-equilibrium excitation and evolution of zone-edge phonons via electron–phonon scattering in photo-excited germanium

We investigate experimentally and using first-principles theory the generation of phonons and the relaxation of carriers on picosecond timescales across the Brillouin zone of photo-excited Ge by inter-valley electron–phonon scattering. The phonons generated are typical of those generated in semiconductor devices, contributing to the accumulation of heat within the material. We simulate the time-evolution of phonon populations, based on first-principles band structure and electron–phonon and phonon–phonon matrix elements, and compare them to data from time-resolved x-ray diffuse scattering experiments, performed at the Linac Coherent Light Source x-ray free-electron laser facility, following photo-excitation by a 50 fs near-infrared optical pulse. We show that the intensity of the non-thermal x-ray diffuse scattering signal, which is observed to grow substantially near the L-point of the Brillouin zone over 3–5 ps, is due to phonons generated by scattering of carriers between the Δ and L valleys. These phonons have low group velocities, resulting in a heat bottleneck. With the inclusion of phonon decay through 3-phonon processes, the simulations also account for other non-thermal features observed in the x-ray diffuse scattering intensity, which are due to anharmonic phonon–phonon scattering of the phonons initially generated by electron–phonon scattering.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗