SEARCH · Engineering Papers

Results for “electromagnetic probes”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14

All sources NASA NTRS DOE OSTI

NASA NTRS2024

EMIC Wave Energy Dissipation as a Source of O + Conics and Warm Plasma Cloak in the Earth's Inner Magnetosphere

This study focuses on a specific source of the O + conics and warm plasma cloak in the Earth's inner magnetosphere due to electromagnetic ion cyclotron (EMIC) wave energy dissipation. We analyze the EMIC wave event observed by Van Allen Probe-A in the early afternoon off equatorial magnetosphere on 18 November 2015, where the two dominant EMIC wave bands, He + -band and H + -band, were observed for ∼4 min. All the wave and plasma parameters, the DC magnetic field, and ion distributions needed for our analysis are taken from the Van Allen Probe-A observations during the event. The major results of our analysis are as follows. (a) The H + and He + heating by EMIC waves is negligible. (b) A strong heating of O + by the wave energy dissipation around the third, fifth, and sixth harmonics of the O + gyrofrequency is revealed, where the majority of energy dissipated goes into heating of O + with the energies ≲100 eV and pitch angles ∼20°–90°. The estimated energy deposition rate is ∼0.1–3.4 eV/s per O + , totaling to the deposition of ∼20–800 eV per O + during the event. (c) EMIC waves substantially contribute to the formation of O + conics and warm plasma cloak by heating the upgoing low-energy ionospheric O + because waves heat ions with the energies and pitch angles that are characteristic of conics and warm plasma cloak, and the energy deposition per O + is comparable to those characteristic energies.

Konstantin V. Gamayunov↗

DOE OSTI2025

How Bright in Gravitational Waves are Millisecond Pulsars for the Galactic Center GeV Gamma-Ray Excess? A Systematic Study

The existence of dark matter (DM) is supported by various macroscopic observations, but its microscopic nature remains elusive. The Galactic Center GeV gamma-ray excess (GCE) has been a leading candidate signal for particle dark matter annihilation. However, an unresolved population of millisecond pulsars (MSPs) in the bulge provides the alternative explanation for the excess. Identifying these MSPs in electromagnetic bands is difficult due to source confusion, pulse broadening, and extinction. Gravitational waves (GWs) provide a complementary probe: a steadily rotating, non-axisymmetric MSP emits a nearly monochromatic GW signal in the sensitive band of ground-based detectors, with amplitude set by its ellipticity. In this work, we systematically investigate the GW emission from the MSP population proposed to explain the GCE and its detectability with current and future detectors. We consider three major scenarios for the origin of ellipticity and model the population properties of these MSPs. We also consider both isolated MSPs and MSPs in binary systems, as well as Doppler effects in the detection. We find that while the signal is below the reach of current interferometers, next-generation detectors such as the Einstein Telescope (ET) and Cosmic Explorer (CE) can detect a fraction of those MSPs, offering a novel test of the MSP interpretation of the GCE. Future directed searches toward the Galactic Center with continued improvements in sensitivities will either uncover this long-sought MSP population or place stringent limits on their ellipticities and abundance, with important implications for both the astrophysical and dark-matter interpretations of the GCE.

Lei, Ming-Yu [Purple Mountain Observ.; USTC, Hefei↗

NASA NTRS1993

Characteristics of Ferromagnetic Flux Focusing Lens in the Development of Surface/Subsurface Flaw Detector

Electromagnetic NDE techniques have in the past steered away from the use of ferromagnetic materials. Although their high permeabilities lead to increased field levels, the properties of ferrous elements in the presence of alternating magnetic fields are difficult to determine. In addition, their use leads to losses which can be minimized through the use of low conductivity ferrites. In fact, the eddy current probes which do incorporate ferromagnetic materials have focused on these losses and the shielding which can be obtained by surrounding a probe with a high permeability, conducting material. Eddy current probes enclosed in conducting and magnetic shields have been used to prevent the generated fields from interacting with materials in the vicinity of the probe, such as when testing near material boundaries. A recent invention has used ferromagnetic shielding to magnetically separate individual concentric eddy current probes in order to eliminate cross-talk between the probes so that simultaneous detection of different types of flaws at different depths can be achieved. In contrast to the previous uses of ferromagnetic materials purely as magnetic shields, an electromagnetic flaw detector recently developed at NASA Langley Research Center takes advantage of the flux focusing properties of a ferromagnetic mild steel in order to produce a simple, effective device for the non-destructive evaluation of conducting materials. The Flux Focusing Eddy Current Probe has been shown to accurately measure material thickness and fatigue damage. The straight forward flaw response of the probe makes the device ideal for rapid inspection of large structures, and has lead to its incorporation in a computer controlled search routine to locate fatigue crack tips and monitor experimental fatigue crack growth experiments.

Wincheski, Buzz↗

NASA NTRS1979

Electromagnetic noise and radio wave propagation below 100 kHz in the Jovian atmosphere. I - The equatorial region

The Galileo satellite program includes the delivery of an entry probe to the Jovian equatorial atmosphere in mid-1985. Optical and RF sensors for a lightning detection system are included as a part of the probe experimental payload. In this paper, calculations of the RF wave propagation and reflection characteristics of the equatorial Jovian atmosphere and ionosphere for frequencies less than 100 kHz are presented. It is shown that wave propagation is limited to line-of-sight and one-hop from the ionosphere. Results are also presented of a statistical treatment of the RF wave power densities for the case of a finite number of events and for the case of a uniformly distributed source. The results can be applied to specific RF experiment configurations concerned with establishing the statistical characteristics of Jovian lightning.

Rinnert, K.↗

DOE OSTI2021

py4DSTEM: A Software Package for Four-Dimensional Scanning Transmission Electron Microscopy Data Analysis

Scanning transmission electron microscopy (STEM) allows for imaging, diffraction, and spectroscopy of materials on length scales ranging from microns to atoms. By using a high-speed, direct electron detector, it is now possible to record a full two-dimensional (2D) image of the diffracted electron beam at each probe position, typically a 2D grid of probe positions. These 4D-STEM datasets are rich in information, including signatures of the local structure, orientation, deformation, electromagnetic fields, and other sample-dependent properties. However, extracting this information requires complex analysis pipelines that include data wrangling, calibration, analysis, and visualization, all while maintaining robustness against imaging distortions and artifacts. In this paper, we present py4DSTEM, an analysis toolkit for measuring material properties from 4D-STEM datasets, written in the Python language and released with an open-source license. We describe the algorithmic steps for dataset calibration and various 4D-STEM property measurements in detail and present results from several experimental datasets. We also implement a simple and universal file format appropriate for electron microscopy data in py4DSTEM, which uses the open-source HDF5 standard. We hope this tool will benefit the research community and help improve the standards for data and computational methods in electron microscopy, and we invite the community to contribute to this ongoing project.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

NASA NTRS2026

The Canadian Galactic Emission Mapper: A New 8-10 GHz Telescope To Map the Polarization of the Northern Sky

The Canadian Galactic Emission Mapper (CGEM) radio telescope is mapping polarized Galactic foregrounds from 8-10 GHz to aid in the search for B-modes in the Cosmic Microwave Background (CMB). Here we describe the design and early on-sky characterization of the CGEM optics. CGEM employs an on-axis, hat feed optical design that is a body of revolution (BOR) and exhibits excellent intrinsic polarization purity. We describe how we have optimized the optics with a novel framework that can directly minimize simulated intensity to polarized intensity (T → P) leakage in angular power spectrum space. The optimized optics exhibit simulated T → P leakage that is orders of magnitude below anticipated CℓBB for r = 10 −3 when scaled from 8-10 GHz to the CMB observing window near 95 GHz. We go on to describe the mechanical design of the optics, including a novel secondary mirror support made from Astroquartz composite that has low loss, low dielectric constant, and preserves the BOR symmetry of the optics. We then showcase the early on-sky performance of the optics with observations of the Sun and satellites, which probe the beam to 40dB down from the peak. A beam model for the deployed CGEM optics based on electromagnetic simulations is in excellent agreement with the on-sky data.

cosmic microwave background↗

DOE OSTI2021

Plasmonic Core–Shell–Satellites with Abundant Electromagnetic Hotspots for Highly Sensitive and Reproducible SERS Detection

In this work, we develop a Ag@Al2O3@Ag plasmonic core–shell–satellite (PCSS) to achieve highly sensitive and reproducible surface-enhanced Raman spectroscopy (SERS) detection of probe molecules. To fabricate PCSS nanostructures, we employ a simple hierarchical dewetting process of Ag films coupled with an atomic layer deposition (ALD) method for the Al2O3 shell. Compared to bare Ag nanoparticles, several advantages of fabricating PCSS nanostructures are discovered, including high surface roughness, high density of nanogaps between Ag core and Ag satellites, and nanogaps between adjacent Ag satellites. Finite-difference time-domain (FDTD) simulations of the PCSS nanostructure confirm an enhancement in the electromagnetic field intensity (hotspots) in the nanogap between the Ag core and the satellite generated by the Al2O3 shell, due to the strong core–satellite plasmonic coupling. The as-prepared PCSS-based SERS substrate demonstrates an enhancement factor (EF) of 1.7 × 107 and relative standard deviation (RSD) of ~7%, endowing our SERS platform with highly sensitive and reproducible detection of R6G molecules. We think that this method provides a simple approach for the fabrication of PCSS by a solid-state technique and a basis for developing a highly SERS-active substrate for practical applications.

47 OTHER INSTRUMENTATION↗

NASA NTRS1993

Eddy-Current Monitoring Of Composite Layups

Eddy-current-probe apparatus used to determine predominant orientations of fibers in fiber/matrix composite materials. Apparatus nondestructive, noninvasive means for monitoring composite prepregs and layups during fabrication to ensure predictable and repeatable mechanical properties of finished composite panels. Consists essentially of electromagnet coil wrapped around horseshoe-shaped powdered-iron or ferrite ore. Optionally, capacitor included in series or parallel with coil to form resonant circuit. Impedance monitor excites radio-frequency current in coil and measures impedance of probe circuit. Affected by whatever material placed near ends of core, where material intercepts alternating magnetic field excited in core by current in coil.

Fox, Robert L.↗

NASA NTRS1990

A laboratory study of the electromagnetic bias of rough surface scattering by water waves

The design, development, and use of a focused-beam radar to measure the electromagnetic bias introduced by the scattering of radar waves by a roughened water surface are discussed. The bias measurements were made over wide ranges of environmental conditions in a wavetank laboratory. Wave-elevation data were provided by standard laboratory capacitance probes. Backscattered radar power measurements coincident in time and space with the elevation data were produced by the radar. The two data sets are histogrammed to produce probability density functions for elevation and radar reflectivity, from which the electromagnetic bias is computed. The experimental results demonstrate that the electromagnetic bias is quite variable over the wide range of environmental conditions that can be produced in the laboratory. The data suggest that the bias is dependent upon the local wind field and on the amplitude and frequency of any background wave field that is present.

Parsons, Chester L.↗

NASA NTRS1993

Plasma Diagnostics by Antenna Impedance Measurements

The impedance of an electrically short antenna immersed in a plasma provides an excellent in situ diagnostic tool for electron density and other plasma parameters. By electrically short we mean that the wavelength of the free-space electromagnetic wave that would be excited at the driving frequency is much longer than the physical size of the antenna. Probes using this impedance technique have had a long history with sounding rockets and satellites, stretching back to the early 1960s. This active technique could provide information on composition and temperature of plasmas for comet or planetary missions. Advantages of the impedance probe technique are discussed and two classes of instruments built and flown by SDL-USU for determining electron density (the capacitance and plasma frequency probes) are described.

Swenson, C. M.↗

NASA NTRS1995

Dielectric property measurements in the Electromagnetic Properties Measurement Laboratory

The capability to measure the dielectric properties of various materials has been developed in the Electromagnetic Properties Measurement Laboratory (EPML) of the Electromagnetics Research Branch (ERB). Two measurement techniques which have been implemented in the EPML to characterize materials are the dielectric probe and waveguide techniques. Several materials, including some for which the dielectric properties are well known, have been measured in an attempt to establish the capabilities of the EPML in determining dielectric properties. Brief descriptions of the two techniques are presented in this report, along with representative results obtained during these measurements.

Cravey, Robin L.↗

DOE OSTI2021

Electromagnetic duality and D3-brane scattering amplitudes beyond leading order

We use on-shell methods to study the non-supersymmetric and supersymmetric low-energy S-matrix on a probe D3-brane, including both the 1-loop contributions of massless states as well as the effects of higher-derivative operators. Our results include: (1) A derivation of the duality invariance of Born-Infeld electrodynamics as the dimensional oxidation of the group of spatial rotations transverse to a probe M2-brane; this is done using a novel implementation of subtracted on-shell recursion. (2) The first explicit loop-level BCJ double-copy in a non-gravitational model, namely the calculation of the 4-point self-dual amplitude of non-supersymmetric Born-Infeld. (3) From previous results for n-point self-dual 1-loop BI amplitudes and the conjectured dimension-shifting relations in Yang-Mills, we obtain an explicit all-multiplicity, at all orders in E, expression for the 1-loop integrand of the MHV sector of N = 4 DBI. (4) For all n > 4, the explicitly integrated duality-violating 1-loop amplitudes (self-dual and next-to-self-dual in pure BI as well as MHV in N = 4 DBI) are shown to be removable at O(ε 0 ) by adding finite local counterterms; we propose that this may be true more generally at 1-loop order. (5) We find that in non-supersymmetric Born-Infeld, not all finite local counterterms needed to restore electromagnetic duality can be constructed using the double-copy with higher-derivative corrections, suggesting a fundamental tension between electromagnetic duality and color-kinematics duality at loop-level. Finally we comment on oxidation of duality symmetries in supergravity and the parallels it has to the M2-brane to D3-brane oxidation demonstrated in this paper.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

DOE OSTI2025

Cocoon shock breakout emission from binary neutron star mergers

Shock breakout emission is among the first observable signals in a wide variety of astrophysical phenomena, including neutron star (NS) mergers, and it can be the dominant component in low-luminosity short γ-ray bursts, as exemplified by GRB 170817A. In this work, we investigate the cocoon shock breakout emission in NS mergers and how its signal depends on the outermost layers of the ejecta profile, which we derive from general relativistic radiation hydrodynamic simulations. We study the formation of the cocoon as a consequence of a relativistic jet propagating through the ejecta. To explore the influence of the outermost layers of the ejecta on the breakout emission, we explore cases where the ejecta has a sharp cutoff or an extended smooth tail. We find that the shock breakout emission is strongly influenced by the shape of the ejecta outer layers, with extended tails yielding results consistent with the observed properties of GRB 170817A, whereas sharp cutoffs overestimate the radiated energy. Using a Bayesian analysis, we estimate the best fit parameters of the central engine, considering both accreting black hole and magnetized neutron star scenarios. Our findings indicate a slight preference for the scenarios where the engine is a black hole. Furthermore, our work probes the nature of neutron star mergers and highlights the importance of the shape of the ejecta profile in modeling early electromagnetic counterparts to these mergers.

79 ASTRONOMY AND ASTROPHYSICS↗

NASA NTRS2001

The Electromagnetic Compatibility (EMC) Design Challenge for Scientific Spacecraft Powered by a Stirling Power Converter

A 55 We free-piston Stirling Technology Demonstration Convertor (TDC) has been tested as part of an evaluation to determine its feasibility as a means for significantly reducing the amount of radioactive material required compared to Radioisotope Thermoelectric Generators (RTGs) to support long-term space science missions. Measurements were made to quantify the low frequency magnetic and electric fields radiated from the Stirling's 80 Hertz (Hz) linear alternator and control electronics in order to determine the magnitude of reduction that will be required to protect sensitive field sensors aboard some science missions. One identified "Solar Probe" mission requires a 100 dB reduction in the low frequency magnetic field over typical military standard design limits, to protect its plasma wave sensor. This paper discusses the electromagnetic interference (EMI) control options relative to the physical design impacts for this power system, composed of 3 basic electrical elements. They are (1) the Stirling Power Convertor with its linear alternator, (2) the power switching and control electronics to convert the 90 V, 80 Hz alternator output to DC for the use of the spacecraft, and (3) the interconnecting wiring including any instrumentation to monitor and control items 1 and 2.

Sargent, Noel B.↗

DOE OSTI2026

Quantum Theory of Surface Lattice Resonances

The collective interactions of nanoparticles arranged in periodic structures give rise to high‐ in‐plane diffractive modes known as surface lattice resonances. Although these resonances and their broader implications have been extensively studied within the framework of classical electrodynamics and linear response theory, a quantum optical theory capable of describing the dynamics of these structures, especially in the presence of material nonlinearities beyond ad hoc few‐mode approximations, is largely missing. To this end, we consider a lattice of metallic nanoparticles coupled to the electromagnetic field and derive the quantum input–output relations within the electric dipole approximation. As applications, we analyze coupling between the nanoparticle array and external quantum emitters, and show how the formalism extends to molecular optomechanics, where the high ‐factors of SLRs enable coupling to collective vibrational modes. We further consider arrays composed of saturable excitonic emitters, demonstrating how emitter nonlinearities can be used to switch the SLR condition between electronic transitions. Using a perturbative approach that accounts for population dynamics, we show how these effects can be probed in pump–probe experiments and give rise to nonlinear phase‐matching phenomena. Our work provides a microscopic framework for modeling SLRs interacting with quantum emitters without phenomenological descriptions of the electromagnetic environment.

molecular optomechanics↗

NASA NTRS1981

Antennas in matter: Fundamentals, theory, and applications

The volume provides an introduction to antennas and probes embedded within or near material bodies such as the earth, the ocean, or a living organism. After a fundamental analysis of insulated and bare antennas, an advanced treatment of antennas in various media is presented, including a detailed study of the electromagnetic equations in homogeneous isotropic media, the complete theory of the bare dipole in a general medium, and a rigorous analysis of the insulated antenna as well as bare and insulated loop antennas. Finally, experimental models and measuring techniques related to antennas and probes in a general dissipative or dielectric medium are examined.

King, R. W. P.↗

NASA NTRS2013

Probing the Intergalactic Magnetic Field with the Anisotropy of the Extragalactic Gamma-ray Background

The intergalactic magnetic field (IGMF) may leave an imprint on the angular anisotropy of the extragalactic gamma-ray background through its effect on electromagnetic cascades triggered by interactions between very high energy photons and the extragalactic background light. A strong IGMF will deflect secondary particles produced in these cascades and will thus tend to isotropize lower energy cascade photons, thereby inducing a modulation in the anisotropy energy spectrum of the gamma-ray background. Here we present a simple, proof-of-concept calculation of the magnitude of this effect and demonstrate that current Fermi data already seem to prefer nonnegligible IGMF values. The anisotropy energy spectrum of the Fermi gamma-ray background could thus be used as a probe of the IGMF strength.

anisotrophy↗

NASA NTRS2004

Electromagnetic Detection of Fatigue Cracks under Protruding Head Ferromagnetic Fasteners

The detection of fatigue cracks under installed fasteners has been a major goal of the aging aircraft NDE community. The Sliding Probe, Magneto-Optic Imager, Rotating Self-Nulling Probe, Low Frequency Eddy Current Array, and Eddyscan systems are among the instruments developed for this inspection. It has been verified that the detection of fatigue cracks under flush head aluminum and titanium fasteners can be accomplished with a high resolution by the above techniques. The detection of fatigue cracks under ferromagnetic and protruding head fasteners, however, has been found to be much more difficult. For the present work, the inspection for fatigue cracks under SAE 4340 Steel Hi-Lok fasteners is explored. Modifications to the Rotating Self-Nulling Eddy Current Probe System are presented which enable the detection of fatigue cracks hidden under the protruding head of the ferromagnetic fastener. Inspection results for samples with varying length EDM notches are shown, as well as a comparison between the signature from an EDM notch and an actual fatigue crack. Finite Element Modeling is used to investigate the effect of the ferromagnetic fastener on the induced eddy current distribution in order to help explain the detection characteristics of the system. This paper will also introduce a modification to the Rotating Probe System designed specifically for the detection of deeply buried flaws in multilayer conductors. The design change incorporates a giant magnetoresistive (GMR) sensor as the pickup device to improve the low frequency performance of the probe. The flaw detection capabilities of the GMR based Self- Nulling Probe are presented along with the status of the GMR based Rotating Probe System for detection of deeply buried flaws under installed fasteners.

Wincheski, Buzz↗