Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “electrochemicals”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Electrochemical Sodiation Mechanism in Magnetite Nanoparticle-Based Anodes: Understanding of Nanoionics-Based Sodium Ion Storage Behavior of Fe 3 O 4

We report electrochemical ion storage behaviors of Fe 3 O 4 nanoparticles, as a representative transition metal oxide for an environmentally benign and low-cost anode for a sodium-ion battery, are thoroughly investigated through a combination of electrochemical analysis and diagnostics of Fe 3 O 4 electrode cells, X-ray-based and spectroscopic analysis of material structure evolution as functions of depth of discharge (DoD) and state of charge (SoC), and first principle modeling. The gravimetric capacity is found to be 50 mA h/g for bulk Fe 3 O 4 (50 nm average crystallite size) and 100 mA h/g--about a tenth of the theoretical prediction for complete conversion--for Fe 3 O 4 nanoparticles (8.7 nm average particle size), respectively. A fundamental and mechanistic study of material evolution as functions of DoD and SoC shows that Fe 3 O 4 does not allow electrochemical incorporation of Na + ions into the empty cation positions of the inverse spinel structure, leading to our assertion that electrochemical intercalation of Na + ions to conversion of the Fe 3 O 4 anode in sodium-ion batteries is nonviable. A density functional theory investigation points to the impracticality of the intercalation of Na + ions into Fe 3 O 4 and further validates our experimental findings. We propose several possible mechanisms corresponding to the observed low capacity, including formation of solid electrolyte interphases with unfavorable properties and adsorption of Na + ions onto surfaces of nanoparticles and/or at heterointerfaces in Fe 3 O 4 composite electrodes in a NaPF 6 -based electrolyte system.

25 ENERGY STORAGE↗
DOE OSTI2026

Comparison of the Effects of Bipolar Membrane Preparation Conditions on the Mechanical Durability and Electrochemical Performance for Electrodialysis Applications

Bipolar membranes (BPMs) are enabling materials for electrochemical conversion technologies such as water electrolysis, fuel cells, CO 2 electrolysis, and electrodialysis (ED) for direct air/ocean capture of CO 2 . However, current BPM durability can suffer from chemical, mechanical, and performance degradation when operated at high current density (ion flux) and physical scale. Therefore, this limits its adoption in a wider applications space. BPMs have several known degradation mechanisms, including chemical breakdown of ion-exchange polymers, loss of junction adhesion, or physical breakdown due to shearing force and pressure swings in an electrodialysis cell. To assess the electrochemical stability and mechanical durability of BPMs under operational conditions, we investigated how fabrication conditions (including preconditioning, hot-pressing temperature and pressure, and catalyst loading) impact the adhesion of custom-made BPMs. T-peel studies were performed ex situ to quantify adhesive forces of BPMs, and bipolar membrane electrodialysis (BPMED) experiments were performed to assess the electrochemical performance of the corresponding BPMs. The results of this systematic comparison indicate that hydration and heated pressing create improved adhesion during the fabrication of BPMs, and BPMED testing shows that these fabrication techniques are not detrimental to the electrochemical performance of the BPMs.

36 MATERIALS SCIENCE↗
DOE OSTI2020

H 2 Evolution at an Electrochemical “Underpotential” with an Iridium-Based Molecular Photoelectrocatalyst

Molecular platforms capable of both photochemical H 2 evolution and electrochemical catalyst regeneration hold promise for the efficient generation of solar fuels. Systems studied to date require a significant electrochemical overpotential (η), so no photon energy is being chemically stored. A detailed study of the parameters that govern the electrochemical overpotential of molecular photoelectrocatalysts is presented. By understanding how tuning the solvent, catalyst structure, and acid pK a affect the kinetics and thermodynamics of the potential- and light-driven H 2 evolution reaction, conditions were identified wherein the solvento complex [Cp*Ir(bpy)(NCCH 3 )][PF 6 ] 2 (Cp* is pentamethylcyclopentadienyl; bpy is 2,2'-bipyridine) mediates photoelectrocatalytic H 2 formation at an electrochemical “underpotential” (η < 0) driven by visible light. Under 460 nm illumination and in the presence of the weak organic acid H-PhTMG + (2-phenyl-1,1,3,3- tetramethylguanidinium), the catalyst facilitates H 2 evolution with Faradaic efficiencies up to 90% and overpotentials as low as –90 mV. As a result, mechanistic studies enabled the construction of graphical “maps” that can guide the choice of catalyst and conditions to minimize overpotential, applicable to both photoelectrocatalysts and dark electrocatalysts.

14 SOLAR ENERGY↗
DOE OSTI2024

Mechanistic Insights into the Electrochemical Oxidation of 5-Hydroxymethylfurfural on a Thin-Film Ni Anode

The electrochemical oxidation of alcohols is being explored as a favorable substitute for the oxygen evolution reaction owing to its capability to generate high-value products and lower overpotentials. Herein, we present a systematic investigation into the electrochemical oxidation of 5-hydroxymethylfurfural (HMF), a model biomass platform chemical, on a thin-film nickel catalyst, aiming to investigate the underlying reaction mechanism and shed light on the role of the catalyst’s microenvironment and phase on activity and product selectivity. Utilizing a combined experimental and computational approach, we demonstrate that NiOOH is the active phase for HMF oxidation. Additionally, we find a substantial impact of the electrochemical environment, particularly the electrolyte pH, on the reaction. Under highly alkaline conditions (pH = 13), higher activity for HMF oxidation is observed, accompanied by an increased selectivity toward 2,5-furandicarboxylic acid (FDCA) production. Conversely, a less alkaline environment (pH = 11) results in diminished HMF oxidation activity and a higher preference for the partial oxidation product 2,5-diformylfuran (DFF). Mechanistic insights from DFT studies reveal that geminal diols that are present under highly alkaline conditions undergo hydride transfer via HMFCA, while a shift to an alkoxide route occurs at a lower pH, favoring the DFF pathway. Hydride transfer energetics are also strongly affected by the surface Ni oxidation state. Finally, this integrated approach, bridging experimental and computational insights, provides a general framework for investigating the electrochemical oxidation of aldehydes and alcohols, thereby advancing rational design strategies in electrocatalysts for alcohol electro-oxidation reactions.

30 DIRECT ENERGY CONVERSION↗
DOE OSTI2021

Porous Two-dimensional Iron-Cyano Nanosheets for High-rate Electrochemical Nitrate Reduction

Ammonia (NH 3 ) is an essential ingredient in agriculture and a promising source of clean energy as a hydrogen carrier. The current major method for ammonia production, however, is the Haber–Bosch process that leads to massive energy consumption and severe environmental issues. Compared with nitrogen (N 2 ) reduction, electrochemical nitrate reduction reaction (NO 3 RR), with a higher NH 3 yield rate and Faradaic efficiency, holds promise for efficient NH 3 production under ambient conditions. To achieve efficient NO 3 RR, electrocatalysts should exhibit high selectivity and Faradaic efficiency with a high NH 3 yield rate. In this work, we developed two-dimensional (2D) iron-based cyano-coordination polymer nanosheets (Fe-cyano NSs) following in situ electrochemical treatment for high-rate NO 3 RR. Owing to the strong adsorption of nitrate on Fe0 active sites generated via topotactic conversion and in situ electroreduction, 2D Fe-cyano electrocatalyst exhibits high catalytic activity with a yield rate of 42.1 mg h –1 mgcat –1 and a Faradaic efficiency of over 90% toward NH 3 production at –0.5 V (vs reversible hydrogen electrode, RHE). Further electrochemical characterizations revealed that superhydrophilic surface and enhanced electrochemical surface area of the 2D porous nanostructures also contributed to the high-rate NO 3 RR activity. Finally, an electrolyzer toward NO 3 RR and oxygen evolution reaction (OER) in a two-electrode configuration is constructed based on 2D Fe-cyano, achieving an energy efficiency of 26.2%. This work provides an alternative methodology toward topotactic conversion of transition metal nanosheets for NO 3 RR and reveals the often-overlooked contribution of hydrophilicity of the catalysts for high-rate electrocatalysis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Geobacter sulfurreducens Immobilized Boron-Doped Diamond Electrodes for Uranium(VI) in Water Electrochemical Bioremediation

The proliferation of nuclear science and technology has resulted in an increase in nuclear waste containing uranium, posing significant risks to both human and environmental health. This study proposes the use of Geobacter sulfurreducens (G. sulfurreducens) modified boron-doped diamond electrodes to facilitate the reduction and removal of uranium(VI) from aqueous media. The bioremediation process involves electrochemically immobilizing the bacteria on a boron-doped diamond electrode (BDD). The immobilization process requires applying reduction potentials ranging from −0.40 to −0.70 V (vs Ag/AgCl (3 M NaCl)), with −0.60 V identified as the optimal potential for effective bacterial modification. The uranium source is provided by a 2.0 mM uranyl acetate solution in G. sulfurreducens growth medium. Scanning electron microscopy (SEM) reveals a highly uniform layer of uranium on the electrode surface. Energy-dispersive X-ray fluorescence spectroscopy (EDS) and cyclic voltammetry (CV) studies confirm the presence of uranium in the system. Raman spectroscopy and X-ray photoelectron spectroscopy (XPS) successfully elucidate the reduction process of U(VI) to predominantly U(IV) using a bacteria-electrode coupled system. Additionally, a comparison is made with the electrochemical removal of uranyl ions using the electrodeposition method on unmodified BDD. Results demonstrate the presence of three uranium oxide species (UO 2 , UO 3 , and U 3 O 8 ) on the BDD electrode after experimentation, in contrast to the G. sulfurreducens/BDD assembly, which achieves the predominant reduction of UO 2 2+ to UO 2 with a small quantity of UO 3 as the final species. This study highlights the efficient electrochemical removal of uranyl ions from aqueous media at the G. sulfurreducens/BDD interface through chronoamperometry, presenting a promising approach for remediating sites contaminated with radioactive materials. The findings contribute to the exploration of sustainable alternatives for managing nuclear waste, emphasizing the potential of this electrochemical bioremediation strategy.

Bacteria↗
DOE OSTI2023

Synthesis of Carbohydrates from Methanol Using Electrochemical Partial Oxidation over Palladium with the Integrated Formose Reaction

Electrochemically derived multicarbon products are a golden target for valorization of captured carbon dioxide due to the potential of turning a waste product into useful commodity chemicals with renewable energy sources. As a tantalizing approach toward their synthesis, the formose reaction utilizes catalytic condensation of formaldehyde to generate carbohydrates. Furthermore, while a sustainable approach to artificial carbohydrate production through electrochemical generation of formaldehyde is desirable, to date, it has not been fully realized. Here, we study the electrocatalytic conversion of methanol to formaldehyde on palladium with faradaic efficiency of over 90% at 0.9 V vs Ag/AgCl and with the partial current density of nearly 3 mA cm -2 at 1.6 V vs Ag/AgCl. We observe the concurrent generation of palladium oxides as a consequence of the high overpotentials employed, which may partially explain the higher selectivity toward the partial oxidation product. Moreover, we demonstrate that formaldehyde produced electrochemically from methanol is feasible for formose reactions without the need for further purification, achieving 21-28% carbon conversion to carbohydrates. This process, therefore, represents a potential avenue for the electrochemical generation of formaldehyde and its utilization in generating multicarbon products inaccessible by other electrocatalytic means.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Electrochemical Reduction Pathways from Goethite to Green Iron in Alkaline Solution with Silicate Additive

Energy-efficient and low-temperature iron electrolysis in alkaline solutions is a low-cost and sustainable ironmaking process with zero-carbon emissions when renewable electrical sources are involved. However, its implementation is hindered by electrochemically inert Fe 3 O 4 and parasitic H 2 gas formation during the electrochemical reduction process, resulting in the low energy efficiency of iron electrolysis. Here, we further explore the potential of electrochemical reduction of goethite (FeOOH) by employing a low concentration of silicate additive in an alkaline solution to mitigate Fe 3 O 4 accumulation and H 2 generation. Electrochemical measurements coupled with operando X-ray diffraction and X-ray absorption spectroscopy suggested FeOOH → Fe 3 O 4 → Fe(OH) 2 → Fe reduction pathways. Interestingly, a poorly crystalline or amorphous Fe(OH) 2 phase formed in the NaOH/silicate mixed electrolyte, possibly due to the inhibitive effect of silicate on water and ion transport, which eventually contributed to the improved reduction of Fe 3 O 4 , also supported by atomistic simulations. This work demonstrates the potential for silicate as a low-cost and effective electrolyte additive to improve room-temperature green iron formation via electrolysis.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Electrochemical Strategy for Hydrazine Synthesis: Development and Overpotential Analysis of Methods for Oxidative N–N Coupling of an Ammonia Surrogate

Hydrazine is an important industrial chemical and fuel that has attracted considerable attention for use in liquid fuel cells. Ideally, hydrazine could be prepared via direct oxidative coupling of ammonia, but thermodynamic and kinetic factors limit the viability of this approach. Here, the present study evaluates three different electrochemical strategies for the oxidative homocoupling of benzophenone imine, a readily accessible ammonia surrogate. Hydrolysis of the resulting benzophenone azine affords hydrazine and benzophenone, with the latter amenable to recycling. The three different electrochemical N–N coupling methods are (1) a proton-coupled electron-transfer process promoted by a phosphate base, (2) an iodine-mediated reaction involving intermediate N–I bond formation, and (3) a copper-catalyzed N–N coupling process. Analysis of the thermodynamic efficiencies for these electrochemical imine-to-azine oxidation reactions reveals low overpotentials (η) for the copper- and iodine-mediated processes (390 and 470 mV, respectively), but a much higher value for the proton-coupled pathway (η ≈ 1.6 V). A similar approach is used to assess molecular electrocatalytic methods for electrochemical oxidation of ammonia to dinitrogen.

25 ENERGY STORAGE↗
DOE OSTI2020

Rapid Electrochemical Methane Functionalization Involves Pd–Pd Bonded Intermediates

High-valent Pd complexes are potent agents for the oxidative functionalization of inert C-H bonds, and it was previously shown that rapid electrocatalytic methane monofunctionalization could be achieved by electro-oxidation of Pd II to a critical dinuclear Pd III intermediate in concentrated or fuming sulfuric acid. However, the structure of this highly reactive, unisolable intermediate, as well as the structural basis for its mechanism of electrochemical formation, remained elusive. Herein, we use X-ray absorption and Raman spectroscopies to assemble a structural model of the potent methane-activating intermediate as a Pd III dimer with a Pd-Pd bond and a 5-fold O atom coordination by H x SO 4 (x-2) ligands at each Pd center. We further use EPR spectroscopy to identify a mixed-valent M-M bonded Pd 2 II,III species as a key intermediate during the Pd II -to-Pd III 2 oxidation. Combining EPR and electrochemical data, we quantify the free energy of Pd dimerization as <-4.5 kcal/mol for Pd 2 II,III and <-9.1 kcal/mol for Pd III 2 . The structural and thermochemical data suggest that the aggregate effect of metal-metal and axial metal-ligand bond formation drives the critical Pd dimerization reaction in between electrochemical oxidation steps. This work establishes a structural basis for the facile electrochemical oxidation of Pd II to a M-M bonded Pd III dimer and provides a foundation for understanding its rapid methane functionalization reactivity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Plasmon-Assisted Electrochemical Epoxidation using Water as an Oxidant

Olefin epoxidation, an important industrial reaction, often uses hazardous oxidants, causing challenges in waste disposal. Here, we demonstrate the use of water as an oxidant by a plasmon-assisted electrochemical strategy. The electrocatalyst is comprised of a hybrid of a water oxidation catalyst, manganese oxide, and plasmonic gold nanoparticles. Visible-light irradiation of the electrocatalyst enhanced the epoxidation of 4-styrenesulfonate 5-fold as compared to dark conditions at the same temperature. From electrochemical analyses conducted under plasmon excitation conditions, complemented by real-time time-dependent density functional tight binding simulations, it is found that the plasmonic boost of the electrochemical styrene epoxidation is due to energetic holes generated by the excitation of localized surface plasmon resonances of gold nanoparticles. These photogenerated holes activate adsorbed water for oxidation and enhance the binding of 4-styrenesulfonate at interfacial sites. Here, this work demonstrates a proof of concept and establishes the mechanistic basis for plasmon-assisted activation of water as an O atom source for electrochemical epoxidations.

Gold↗
DOE OSTI2020

Water stable molecular n-doping produces organic electrochemical transistors with high transconductance and record stability

From established to emergent technologies, doping plays a crucial role in all semiconducting devices. Doping could, theoretically, be an excellent technique for improving repressively low transconductances in n-type organic electrochemical transistors – critical for advancing logic circuits for bioelectronic and neuromorphic technologies. However, the technical challenge is extreme: n-doped polymers are unstable in electrochemical transistor operating environments, air and water (electrolyte). Here, the first demonstration of doping in electron transporting organic electrochemical transistors is reported. The ammonium salt tetra-n-butylammonium fluoride is simply admixed with the conjugated polymer poly(N,N’-bis(7-glycol)-naphthalene-1,4,5,8-bis(dicarboximide)-co-2,2’-bithiophene-co-N,N’-bis(2-octyldodecyl)-naphthalene-1,4,5,8-bis(dicarboximide), and found to act as a simultaneous molecular dopant and morphology-additive. The combined effects enhance the n-type transconductance with improved channel capacitance and mobility. Furthermore, operational and shelf-life stability measurements showcase the first example of water-stable n-doping in a polymer. Overall, the results set a precedent for doping/additives to impact organic electrochemical transistors as powerfully as they have in other semiconducting devices.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Electrochemical deposition of N-heterocyclic carbene monolayers on metal surfaces

N-heterocyclic carbenes (NHCs) have been widely utilized for the formation of self-assembled monolayers (SAMs) on various surfaces. The main methodologies for preparation of NHCs-based SAMs either requires inert atmosphere and strong base for deprotonation of imidazolium precursors or the use of specifically-synthesized precursors such as NHC(H)[HCO 3 ] salts or NHC–CO 2 adducts. Herein, we demonstrate an electrochemical approach for surface-anchoring of NHCs which overcomes the need for dry environment, addition of exogenous strong base or restricting synthetic steps. In the electrochemical deposition, water reduction reaction is used to generate high concentration of hydroxide ions in proximity to a metal electrode. Imidazolium cations were deprotonated by hydroxide ions, leading to carbenes formation that self-assembled on the electrode’s surface. SAMs of NO 2 -functionalized NHCs and dimethyl-benzimidazole were electrochemically deposited on Au films. SAMs of NHCs were also electrochemically deposited on Pt, Pd and Ag films, demonstrating the wide metal scope of this deposition technique.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2024

Microstructurally resolved electrochemical evolution of mechanical- and irradiation-induced damage in nuclear alloys

Abstract There is a need for high-throughput, scale-relevant, and direct electrochemical analysis to understand the corrosion behavior and sensitivity of nuclear materials that are exposed to extreme (high pressure, temperature, and radiation exposure) environments. We demonstrate the multi-scale, multi-modal application of scanning electrochemical cell microscopy (SECCM) to electrochemically profile corrosion alterations in nuclear alloys in a microstructurally resolved manner. Particularly, we identify that both mechanically deformed and irradiated microstructures show reduced charge-transfer resistance that leads to accelerated oxidation. We highlight that the effects of mechanical deformation and irradiation are synergistic, and may in fact, superimpose each other, with implications including general-, galvanic-, and/or irradiation-activated stress-corrosion cracking. Taken together, we highlight the ability of non-destructive, electrochemical interrogations to ascertain how microstructural alterations result in changes in the corrosion tendency of a nuclear alloy: knowledge which has implications to rank, qualify and examine alloys for use in nuclear construction applications.

Chen, Xin↗
DOE OSTI2022

Highly stretchable organic electrochemical transistors with strain-resistant performance

Realizing fully stretchable electronic materials is central to advancing new types of mechanically agile and skin-integrable optoelectronic device technologies. Here we demonstrate a materials design concept combining an organic semiconductor film with a honeycomb porous structure with biaxially prestretched platform that enables high-performance organic electrochemical transistors with a charge transport stability over 30-140% tensional strain, limited only by metal contact fatigue. In this work, the prestretched honeycomb semiconductor channel of donor-acceptor polymer poly(2,5-bis(2-octyldodecyl)-3,6-di(thiophen-2-yl)-2,5-diketo-pyrrolopyrrole-alt-2,5-bis(3-triethyleneglycoloxy-thiophen-2-yl) exhibits high ion uptake and completely stable electrochemical and mechanical properties over 1,500 redox cycles with 10(4) stretching cycles under 30% strain. Invariant electrocardiogram recording cycles and synapse responses under varying strains, along with mechanical finite element analysis, underscore that the present stretchable organic electrochemical transistor design strategy is suitable for diverse applications requiring stable signal output under deformation with low power dissipation and mechanical robustness. Highly stretchable organic electrochemical transistors with stable charge transport under severe tensional strains are demonstrated using a honeycomb semiconducting polymer morphology, thereby enabling controllable signal output for diverse stretchable bioelectronic applications.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Choline chloride-formic acid mixture as a medium for the reduction of pertechnetates – electrochemical and spectroscopic studies

In this work, physicochemical properties of the choline chloride (ChCl) and formic acid (FA) mixture (1:2 molar ratio) have been studied over a broad range of temperatures (-140°C – 60 °C). Differential scanning calorimetry has shown that the examined system remains in liquid state at very low temperatures - a glass transition is observed in the range of -125 °C to - 90 °C. The kinematic viscosity, ionic conductivity and the width of the electrochemical window determined for this system revealed its beneficial electrochemical properties. This indicates suitability of ChCl:FA electrolytes in electrochemical measurements. In this non-aqueous electrolyte, the electrochemical reduction of Tc(VII) ions has been studied for the first time. Cyclic voltammetry and chronopotentiometry experiments revealed that the electroreduction of the pertechnetates is a multi-path process which leads to formation of a Tc(IV) ionic form. X-ray absorption spectroscopy of the latter revealed its structure as a TcCl 6 2- complex.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Correlating the Morphological Changes to Electrochemical Performance During Carbon Corrosion in Polymer Electrolyte Fuel Cells

A mechanistic understanding of carbon corrosion in polymer electrolyte fuel cells (PEFCs) is required to design durable catalyst layers. Uncontrolled startup and shutdown of PEFCs cause electrochemical oxidation of carbon, which leads to several degradation phenomena, such as loss in electrochemical surface area (ECSA), pore structure collapse or increase in mass transport resistance. In this study, the chronology of morphological changes in the cathode catalyst layer due to carbon corrosion was identified and correlated with electrochemical performance degradation. PEFCs were subjected to the Department of Energy carbon corrosion accelerated stress test (AST) protocol. The study revealed two phases: in the initial phase (~500 AST cycles), amorphous carbon in contact with Pt nanoparticles oxidized fast. Rapid carbon loss and catalyst layer thinning occurred, but pore structure did not change significantly. Pt nanoparticles detached from the support and ECSA decreased drastically. In the second phase (~1500 AST cycles), carbon corrosion slowed down, but severe pore structure collapse was observed. Porosity and pore connectivity within the cathode catalyst layer decreased considerably. Electrochemical diagnostics corroborated this finding by showing significantly higher O2 mass transport resistance. Lastly, no significant change was observed in the concentration of oxides on the carbon surface after AST. But overall water management in the cathode catalyst layer deteriorated as the pore structure collapsed. This study provides an in-depth understanding of morphological changes during PEFC carbon corrosion AST protocol and motivates novel material design strategies to enable durable PEFCs.

catalyst layers↗
DOE OSTI2023

Radiation effects on materials for electrochemical energy storage systems

Batteries and electrochemical capacitors (ECs) are of critical importance for applications such as electric vehicles, electric grids, and mobile devices. However, the performance of existing battery and EC technologies falls short of meeting the requirements of high energy/high power and long durability for increasing markets such as the automotive industry, aerospace, and grid-storage utilizing renewable energies. Therefore, improving energy storage materials performance metrics is imperative. In the past two decades, radiation has emerged as a new means to modify functionalities in energy storage materials. There exists a common misconception that radiation with energetic ions and electrons will always cause radiation damage to target materials, which might potentially prevent its applications in electrochemical energy storage systems. But in this review, we summarize recent progress in radiation effects on materials for electrochemical energy storage systems to show that radiation can have both beneficial and detrimental effects on various types of energy materials. Prior work suggests that fundamental understanding toward the energy loss mechanisms that govern the resulting microstructure, defect generation, interfacial properties, mechanical properties, and eventual electrochemical properties is critical. Here, we discuss radiation effects in the following categories: (1) defect engineering, (2) interface engineering, (3) radiation-induced degradation, and (4) radiation-assisted synthesis. We analyze the significant trends and provide our perspectives and outlook on current research and future directions in research seeking to harness radiation as a method for enhancing the synthesis and performance of battery materials.

25 ENERGY STORAGE↗