Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “electric susceptibility”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14
All sourcesNASA NTRSDOE OSTI
NASA NTRS2004

Demonstration of an Ultra-Stable Cryogenic Platform with 25 pK/root-Hz Stability

Existing paramagnetic susceptibility thermometers used in fundamental physics experiments near 2.2 K are capable of measuring temperature changes with a precision of about 100 pK in a one-hertz measurement bandwidth, with a demonstrated drift stability of about a nK per day. Commercial electrical heater controllers are only able to control power dissipation to a precision of about ten parts per million (ppm), with an open loop drift of about 50 ppm per day. We have developed an ultra-stable temperature platform with a demonstrated noise of 25 pK in a one-hertz bandwidth, and we have identified the physical source of this residual noise. We used an array of RF-biased Josephson junctions to precisely control the electrical power dissipation in a heater resistor mounted on this thermally isolated cryogenic platform to well beyond our ability to measure, which we estimate is stable to better than a part in 10(exp 12). This Josephson heater controller may be used in a new synchronous demodulation circuit to maintain absolute temperature stability of the stage to about the same level as the demonstrated noise, provided that the He-4 superfluid transition temperature is fundamentally stable at this level. This work may provide a blackbody temperature reference for use in space radiometry applications that is considerably more stable than the temperature of the cosmic background radiation itself. This new technology may enable critical heat capacity measurements in He-4 within a weightless laboratory to a reduced temperature of about 10(exp -11), where the critical fluctuation lengths would be about a cm, and the fluctuation rates would be measurable within the bandwidth of the thermometry.

Green, Colin J.↗
NASA NTRS2010

Thermoelectric Converter for Loop Heat Pipe Temperature Control: Experience and Lessons Learned

This paper describes the theoretical background and implementation methodology of using a thermoelectric converter (TEC) for operating temperature control of a loop heat pipe (LHP). In particular, experimental results from ambient and thermal vacuum tests of an LHP are presented for illustrations. The most commonly used state-of-the-art method to control the LHP operating temperature is to cold bias its compensation chamber (CC) and use an electrical heater to maintain the CC at the desired set point temperature. Although effective, this approach has its shortcomings in that the electrical heater can only provide heating to the CC, and the required power can be large under certain conditions. An alternative method is to use a TEC, which is capable of providing both heating and cooling to the CC. In this method, one side of the TEC is attached to the CC, and the other side is connected to the evaporator via a thermal strap. Using a bipolar power supply and a control algorithm, a TEC can function as a heater or a cooler, depending on the direction of the current flow. Extensive ground tests of several LHPs have demonstrated that a TEC can provide very tight temperature control for the CC. It also offers several additional advantages: (1) The LHP can operate at temperatures below its natural operating temperature at low heat loads; (2) The required heater power for a TEC is much less than that for an electrical heater; and (3) It enhances the LHP start-up success. Although the concept of using a TEC for LHP temperature control is simple, there are many factors to be considered in its implementation for space applications because the TEC is susceptible to the shear stress and yet has to sustain the dynamic load under the spacecraft launch environment. The added features that help the TEC to withstand the dynamic load will inevitably affect the TEC thermal performance. Some experiences and lessons learned are addressed in this paper.

Ku, Jentung↗
DOE OSTI2020

Moisture-Induced Structural Degradation in Methylammonium Lead Iodide Perovskite Thin Films

Methylammonium lead iodide (CH 3 NH 3 PbI 3 , MAPbI 3 ) belongs to the group of organic–inorganic halide perovskites (OIHPs) that exhibit exceptional electrical and optical behavior suitable for photovoltaic applications. However, improving its structural and chemical stability and robustness remains a challenge for OIHPs to be considered a feasible active material in optoelectronic devices. This is due to the fact that this material is very susceptible to degrade under various intrinsic and extrinsic factors. Therefore, it is crucial to understand the mechanisms through which MAPbI 3 undergoes chemical degradation under operating conditions such as a relatively humid environment. We present the structural characteristics of MAPbI 3 under working conditions that suggest the routes of phase segregation as a result of exposing to highly moist media. We use dark pulse discharge behavior and current–voltage (I–V) variations of MAPbI 3 under different moisture levels to investigate the nature of structural degradation in OIHPs. Here we show that while relatively lower levels of humidity (~60% RH) have a limited impact on the structural stability of MAPbI 3 , exposure to higher levels of moisture (~100% RH) results in the formation of PbI 2 and aqueous CH 3 NH 3 I, which fundamentally change the charge transport characteristics in MAPbI 3 . Our findings explain the ongoing debate on the presence of a threshold for the humidity that triggers irreversible structural transformation and leads to full degradation of MAPbI 3 .

36 MATERIALS SCIENCE↗
DOE OSTI2022

A-type antiferromagnetic order in semiconducting EuMg 2 Sb 2 single crystals

Eu-based Zintl-phase materials EuA 2 Pn 2 (A = Mg, In, Cd, Zn; Pn = Bi, Sb, As, P) have generated significant recent interest owing to the complex interplay of magnetism and band topology. Here, we investigated the crystallographic, magnetic, and electronic properties of the layered Zintlphase single crystals of EuMg 2 Sb 2 with the trigonal CaAl 2 Si 2 crystal structure (space group $P\bar{3}m1$). Electrical resistivity measurements complemented with angle-resolved photoemission spectroscopy (ARPES) studies and density functional theory (DFT) calculations find an activated behavior with intrinsic conductivity at high temperatures indicating a semiconducting electronic ground state with a narrow energy gap of 370 meV. Magnetic susceptibility and zero-field heat capacity measurements indicate that the compound undergoes antiferromagnetic (AFM) ordering at the Néel temperature T N = 8.0(2) K. Here, zero-field neutron-diffraction measurements reveal that the AFM ordering is A-type where the Eu spins (Eu 2+ , S = 7/2) arranged in ab-plane layers are aligned ferromagnetically in the ab plane and the Eu spins in adjacent layers are aligned antiferromagnetically. Eu-moment reorientation within the ab planes in the trigonal AFM domains associated with a very weak inplane magnetic anisotropy is also evident below T N at low fields < 0.05 T. Although isostructural semimetallic EuMg 2 Bi 2 is reported to host Dirac surface states, the observation of narrow-gap semiconducting behavior in EuMg 2 Sb 2 implies a strong role of spin-orbit coupling (SOC) in tuning the electronic states of these materials. Our DFT studies also suggest, besides the SOC, the more electronegative and smaller Sb than Bi shifts the low-lying conduction bands along the Γ-A direction to higher energy, resulting in an indirect bulk band gap between the Γ and M points for EuMg 2 Sb 2 .

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2021

UV-Induced Degradation of High-Efficiency Solar Cells with Different Architectures

The ultraviolet-induced degradation (UVID) of solar panels is associated with the deterioration of cell performance and reduced reliability of packaging materials. Here we examine the UV stability of different architectures of high-efficiency solar cells without any encapsulation. Identical UV exposure tests were performed at two different labs using UVA-340 fluorescent lamps under different electrical bias configurations (open- or short-circuit) and irradiated cell surfaces (for bifacial technologies). Cell technologies, including heterojunction (HJ), interdigitated back-contact cells (IBC), passivated emitter rear contact (PERC), passivated emitter rear totally-diffused (PERT), are found to be more susceptible to UVID, leading to significant Isc loss (up to 4%) and P max loss (up to 15%) as compared to the conventional back surface field (Al-BSF) cells after exposure to UV irradiation of 8.92 MJ-m -2 -nm -1 at 340 nm. Additionally, the bifacial cells when irradiated from the backside exhibited greater photocurrent loss compared to the front side exposure, indicating potential sensitivity of rear surface passivation to UV radiation.

crystalline silicon↗
NASA NTRS1971

Electromagnetic compatibility fundamentals applied to spacecraft radio communication systems

A design guide for minimizing electromagnetic interference in aerospace communication equipment for ground stations is presented. Specifically treated are the mechanisms of generating unwanted radio emissions that may affect station operations as well as other communications services, the mechanisms by which sensitive receivers become susceptible to interference, means for reducing interference, standard methods of measurement, and the problems of site selection. The sources of interference are viewed primarily as originating from communications transmitters aboard spacecraft and aircraft, ground transmitters within and outside the ground stations, and other electrical sources on the ground that are not intended to radiate.

Haber, F.↗
NASA NTRS1991

Lightning Protection

Lightning Technologies, Inc., Pittsfield, MA, - a spinoff company founded by president J. Anderson Plumer, a former NASA contractor employee who developed his expertise with General Electric Company's High Voltage Laboratory - was a key player in Langley Research Center's Storm Hazards Research Program. Lightning Technologies used its NASA acquired experience to develop protective measures for electronic systems and composite structures on aircraft, both of which are particularly susceptible to lightning damage. The company also provides protection design and verification testing services for complete aircraft systems or individual components. Most aircraft component manufacturers are among Lightning Technologies' clients.

Source record↗
NASA NTRS2012

How are Space Weather and Space Climate Connected to Solar Phenomena?

Many aspects of modern society are susceptible to space weather effects. Pertinent space weather effects include high-energy electromagnetic and particle radiation, changes of atmospheric drag, reduction of GPS accuracy or complete loss of GPS signals, communication outages, and the generation of potentially harmful DC currents in our electric power grid. Beginning in the early 1990s, researchers and government have been increasingly aware of the need to understand the causes of space weather, and to find ways to mitigate deleterious effects associated with it. New research and development programs have been created to address space weather primarily at NASA but also at other agencies. This investment has been very fruitful by generating a new class of entirely new space weather specification and forecast capabilities. This presentation provides an overview of space weather causes and effects, as well as of research and development to forecast and mitigate space weather effects. It will include a discussion of modern space weather analysis and forecasting, and conclude by pointing out paths into the future.

Hesse, Michael↗
NASA NTRSDate not supplied

Electrified Aircraft Propulsion Systems: Gas Turbine Control Considerations for the Mitigation of Potential Failure Modes and Hazards

This paper provides a high-level review of the potential failure modes and hazards to which electrified aircraft propulsion (EAP) systems are susceptible, along with potential gas turbine control-based strategies to assist in the mitigation of those failures. To introduce the types of failures that an EAP system may experience, a generic EAP system is considered, consisting of gas turbine engines, mechanical drives, electric machines, power electronics and distribution systems, energy storage devices, and motor driven propulsors. The functionality provided by each of these EAP subsystems is discussed, along with their potential failure modes, and possible strategies for mitigating those failures. To further illustrate the role of gas turbine controls in mitigating EAP failure modes, an example based on a simulated EAP concept aircraft proposed by NASA is given. The effects of failures are discussed, along with turbomachinery control strategies, including reversionary control modes, and control limit logic.

Donald L Simon↗
NASA NTRS2021

Electrified Aircraft Propulsion Systems: Gas Turbine Control Considerations for the Mitigation of Potential Failure Modes and Hazards

This paper provides a high-level review of the potential failure modes and hazards to which electrified aircraft propulsion (EAP) systems are susceptible along with potential gas turbine control-based strategies to assist in the mitigation of those failures. To introduce the types of failures that an EAP system may experience, a generic EAP system is considered consisting of gas turbine engines, mechanical drives, electric machines, power electronics and distribution systems, energy storage devices, and motor driven propulsors. The functionality provided by each of these EAP subsystems is discussed along with their potential failure modes and possible strategies for mitigating those failures. To further illustrate the role of gas turbine controls in mitigating EAP failure modes, an example based on a simulated EAP concept aircraft proposed by NASA is given. The effects of failures are discussed, along with turbomachinery control strategies, including reversionary control modes, and control limit logic

Electrified Aircraft Propulsion↗
NASA NTRS2008

NASA Tech Briefs, August 2008

Customizable Digital Receivers for Radar Two-Camera Acquisition and Tracking of a Flying Target Visual Data Analysis for Satellites A Data Type for Efficient Representation of Other Data Types Hand-Held Ultrasonic Instrument for Reading Matrix Symbols Broadband Microstrip-to-Coplanar Strip Double-Y Balun A Topographical Lidar System for Terrain-Relative Navigation Programmable Low-Voltage Circuit Breaker and Tester Electronic Switch Arrays for Managing Microbattery Arrays Topics covered include: Lower-Dark-Current, Higher-Blue-Response CMOS Imagers; Fabricating Large-Area Sheets of Single-Layer Graphene by CVD; Support for Diagnosis of Custom Computer Hardware; Providing Goal-Based Autonomy for Commanding a Spacecraft; Dynamic Method for Identifying Collected Sample Mass; Optimal Planning and Problem-Solving; Attitude-Control Algorithm for Minimizing Maneuver Execution Errors; Grants Document-Generation System; Heat-Storage Modules Containing LiNO3 3H2O and Graphite Foam; Precipitation-Strengthened, High-Temperature, High-Force Shape Memory Alloys; Improved Relief Valve Would Be Less Susceptible to Failure; Safety Modification of Cam-and-Groove Hose Coupling; Using Composite Materials in a Cryogenic Pump; Using Electronic Noses to Detect Tumors During Neurosurgery; Producing Newborn Synchronous Mammalian Cells; Smaller, Lower-Power Fast-Neutron Scintillation Detectors; Rotationally Vibrating Electric-Field Mill; Estimating Hardness from the USDC Tool-Bit Temperature Rise; Particle-Charge Spectrometer; Automated Production of Movies on a Cluster of Computers; FIDO-Class Development Rover; and Tone-Based Command of Deep Space Probes Using Ground Antennas.

Source record↗
NASA NTRSDate not supplied

Launch Vehicle and Spacecraft Transmitter Electromagnetic Compatibility

The Launch Services Program at NASA’s Kennedy Space Center (KSC) is the primary gate for acquiring commercial vehicles to provide a cost effective ride to space for NASA spacecraft. With the lunar Gateway, more human tended elements are planned for launch. One challenge facing the space industry is the proliferation of communication and science transmitters at frequencies beyond the qualification of space avionics and instruments. Studies have ensued to examine the intricacies of performing radiated susceptibility testing and analysis above 18 GHz. Changes in the launch vehicle communications interface to the range have also lead to new launch vehicle antenna systems and more reliance on GPS and telemetry systems. Finally, research initiated at KSC in the area of predicted electric field distributions in launch vehicle payload fairings have spawned Small Business Technology Transfer initiatives for industry to investigate statistical algorithm and computational improvements in large payload fairing modeling of transmitters at frequencies in the GHz range. These topics, along with electromagnetic compatibility testing for launch vehicles will be discussed.

Electromagnetic Testing Cavity Statistics↗
DOE OSTI2025

Collinear antiferromagnetic order in a quasi-two-dimensional triangular lattice compound DyNiAl 4 Ge 2

The two-dimensional magnetic triangular lattice, with rare-earth local moments coupled through long-range interactions and hosting strong spin-orbit coupling, serves as an ideal platform for exploring novel quantum phenomena. Here, we report the physical properties of DyNiAl 4 Ge 2 single crystals through comprehensive structural, magnetic, heat capacity, electrical transport, and neutron powder diffraction measurements. DyNiAl 4 Ge 2 crystallizes in a trigonal lattice with the space group $R\bar{3}m$, where Dy atoms form two-dimensional triangular lattice layers within the 𝑎𝑏 plane and stack along the 𝑐 axis. Magnetic susceptibility measurement reveals a magnetic phase transition at 𝑇 𝑁 = 9.0 K, further confirmed by the 𝜆-shaped peak in the heat capacity curve. The obtained temperature-magnetic field phase diagram is relatively simple compared to other isostructural compounds, suggesting the absence of magnetic frustration. This is further evidenced by neutron powder diffraction, which shows a collinear antiferromagnetic ground state with a propagation vector 𝒌 = (0, 0, 1.5), implying the absence of magnetic frustration in DyNiAl 4 Ge 2 . In this magnetic structure, Dy moments are aligned ferromagnetically within each triangular layer and arranged antiferromagnetically between adjacent layers along the 𝑐 axis. In conclusion, our results establish DyNiAl 4 Ge 2 as a model system for understanding the interplay between RKKY interaction and geometrical frustration in this family of compounds.

Wu, HengHeng [Chinese Academy of Sciences (CAS), S↗
DOE OSTI2025

Predicting Quantum Criticality in Single-Crystalline Ce 2 Ru 3 Ge 5

Strongly correlated f-electron systems are known to host exotic quantum states, such as quantum criticality, complex order parameters, and unconventional superconductivity. However, the appearance of these exotic states is difficult to predict, making the study of quantum critical behavior challenging, especially in ferromagnetic materials. Herein, we report a structure–property map for Ce 2 M 3 X 5 (M = transition metal; X = main group element) that aids in the targeted design of materials likely to exhibit quantum criticality. Guided by this map, we report on the synthesis of single-crystalline Ce 2 Ru 3 Ge 5 and provide, for the first time, magnetic susceptibility, heat capacity, resistivity, and magnetoresistance measurements on single crystals. Here, we observe a weak ferromagnetic-like response at 7.5 K, which is contrasted with the bulk ferromagnetic ordering that appears in polycrystalline samples. Non-Fermi liquid behavior is seen in the temperature dependent electrical resistivity and heat capacity of the single crystals, suggesting proximity to a ferromagnetic quantum critical point without chemical or physical pressure. Given the contrast with previous reports of polycrystals, these results lead us to propose that single crystalline Ce 2 Ru 3 Ge 5 is intrinsically tuned into the vicinity of a ferromagnetic quantum critical point.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Exploring the $A$-V-Sb landscape beyond $A$$\mathrm{V_3}$ $\mathrm{Sb_5}$: A case study on the $\mathrm{KV_6}$ $\mathrm{Sb_6}$ Kagome compound

Kagome compounds have garnered attention in the past few years for their intriguing magnetic properties arising from spin frustration dictated by the geometry of the Kagome sublattice. In this paper, we highlight the success of the unconventional hydride route for the fast and easy synthesis of the Kagome compound $\mathrm{KV_6}$ $\mathrm{Sb_6}$. Here, high-temperature in situ powder x-ray diffraction (PXRD) studies proved to be useful in hinting at the existence of $\mathrm{KV_6}$ $\mathrm{Sb_6}$, identifying its synthesis conditions, and understanding the reaction mechanism. The crystal structure for $\mathrm{KV_6}$ $\mathrm{Sb_6}$ was determined from high-resolution PXRD data. The compound has a layered structure [$R\overline{3}m, a = 5.5318$ (9) Å, $c = 34.23$ (3)Å 3 $Z = 3$] at room temperature] and features a Kagome bilayer of V atoms. $\mathrm{KV_6}$ $\mathrm{Sb_6}$ is isostructural to the previously reported $\mathrm{RbV_6}$ $\mathrm{Sb_6}$ and $\mathrm{CsV_6}$ $\mathrm{Sb_6}$ compounds. $\mathrm{KV_6}$ $\mathrm{Sb_6}$ is thermally stable in vacuum up to 1173 K, as evident from the high-temperature in situ PXRD and differential scanning calorimetric analysis. Investigation of magnetic properties for $\mathrm{KV_6}$ $\mathrm{Sb_6}$ between 2 and 300 K reveals temperature-independent paramagnetism and an absence of superconductivity, like the Rb and Cs analogs. Furthermore, we compare the magnetic properties of K V 3 Sb 5 , another ternary Kagome compound, synthesized via two different methods: the hydride route and the traditional route from elements. Low-temperature transport property measurements of $\mathrm{KV_6}$ $\mathrm{Sb_6}$ indicate metallic behavior and an intrinsically low thermal conductivity of $\mathrm{1.0 W K^-1}$ $\mathrm{m^-1}$ at 300 K. The layered structure of $\mathrm{KV_6}$ $\mathrm{Sb_6}$ makes it an attractive candidate for deintercalation and doping studies to tune both magnetic and transport properties, laying a foundation for further studies.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Robust superconductivity and the suppression of charge-density wave in the quasi-skutterudites Ca 3 ( Ir 1 – x Rh x ) 4 Sn 13 single crystals at ambient pressure

Single crystals of the quasi-skutterudite compounds Ca 3 (Ir 1-x Rh x ) 4 Sn 13 (3–4–13) were synthesized by flux growth and characterized by x-ray diffraction, energy dispersive x-ray spectroscopy, magnetization, resistivity, and radio frequency magnetic susceptibility techniques. The coexistence and competition between the charge density wave (CDW) and superconductivity was studied by varying the Rh/Ir ratio. The superconducting transition temperature, T c , varies from 7 K in pure Ir (x = 0) to 8.3 K in pure Rh (x = 1). Temperature-dependent electrical resistivity reveals monotonic suppression of the CDW transition temperature, T CDW (x). The CDW starts in pure Ir, x = 0, at T CDW ≈ 40 K and extrapolates roughly linearly to zero at x c ≈ 0.53–0.58 under the superconducting dome. Magnetization and transport measurements show a significant influence of CDW on superconducting and normal states. Meissner expulsion is substantially reduced in the CDW region, indicating competition between the CDW and superconductivity. The low-temperature resistivity is higher in the CDW part of the phase diagram, consistent with the reduced density of states due to CDW gapping. Its temperature dependence just above T c shows signs of non-Fermi liquid behavior in a cone-like composition pattern. We conclude that the Ca 3 (Ir 1-x Rh x ) 4 Sn 13 alloy is a good candidate for a composition-driven quantum critical point at ambient pressure.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2024

Quantum limits of superconducting-photonic links and their extension to millimeter waves

Photonic addressing of superconducting circuits has been proposed to overcome wiring complexity and heat-load challenges. However, such superconducting-photonic links suffer from an efficiency-noise trade-off that limits scalability. This trade-off arises because increasing power conversion efficiency entails reducing optical power, which makes the converted signal susceptible to shot noise. We analyze this trade-off and find that the laser-driven qubit gate infidelity scales inversely with the number of photons used. While methods such as nonlinear detection or squeezed light could mitigate this effect, we consider generating higher-frequency electrical signals, such as millimeter waves (100 GHz), using laser light. At these higher frequencies, circuits have higher operating temperatures and cooling power budgets and alleviate constraints posed by the trade-off. Therefore, we demonstrate an optically driven cryogenic millimeter-wave source with a maximum power efficiency of 8 ×10 −5 that can generate a maximum of 0.7 μ⁢W of 80 GHz power, with a 1200-thermal-photon equivalent of added noise at 4K. Using this source, we perform frequency-domain spectroscopy of superconducting NbTiN resonators at 80–90 GHz. Our results show a promising approach to lessen the efficiency-noise constraints on superconducting-photonic links, while leveraging the benefits of photonic signal delivery. Further optimization of power efficiency and noise at high frequencies could make scalable photonic control of superconducting qubits viable at temperatures exceeding 1K.

Optoelectronics↗
NASA NTRS1992

Stability of metal particle and metal particulate media

Metal particulate (MP) video tape was launched for 8 mm video tape in 1985. Since then MP tapes have been applied to several consumer formats and instrumental formats because of its superior electrical performance. Recently data storage media, such as DDS and D-8, have started employing MP tape. However, there are serious concerns with archival stability of MP tape particularly in the case of data storage use, as metal particles essentially have problems with chemical instability and are susceptible to oxidation and corrosion. Although there were some studies about the archival stability of metal particles or MP tapes, a clear understanding has yet to be reached. In this paper, we report the stability of magnetic properties of current metal particles, and then discuss the new technologies to improve the stability further.

Okamoto, Kazuhiro↗