SEARCH · Engineering Papers

Results for “dynamic shock experiments”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14

All sources NASA NTRS DOE OSTI

DOE OSTI2023

Temperature-based reactive flow model for TATB plastic bonded explosives

A new reactive flow model is presented for TATB-based plastic bonded explosives, applicable to shock initiation and detonation problems of differing initial temperature. Temperature disequilibrium is assumed between unreacted explosive, material in the vicinity of compressed defects (called hot spots), and detonation products. The model incorporates temperature-dependent decomposition reaction rates. Arrhenius model parameters were derived from subscale quantum-based molecular dynamics simulations of shock-induced TATB decomposition. Further, a model of detonation carbon aggregation is incorporated, describing the late-time slow release of energy inherent to detonation in TATB-based materials. The predictive ability of the model in the shock initiation regime is tested against recent thin pulse experiments on PBX 9502. Here, the model is found to perform equally well in predicting the size effect curve of ambient, cold, and hot PBX 9502 rate sticks.

Chemistry - Chemical explosives↗

DOE OSTI2023

Polyimide dynamically compressed to decomposition pressures: Two-wave structures captured by velocimetry and modeling

We performed a series of six plate impact experiments on polyimide and modeled them using new reactant and products equations of state combined with an Arrhenius rate model. The first experiment was diagnosed with embedded electromagnetic velocity gauges through which we directly observed attenuation of the lead shock to an approximately constant state over a propagation distance of roughly 4 mm. Simulated gauge profiles were in excellent qualitative agreement with experiment and suggested a sluggish chemical reaction that did not proceed to completion. The remaining five experiments were conducted in a transmission geometry and diagnosed velocimetrically at the sample/window interface. All five of these yielded profiles with a sharp shock followed by a more gradual approach to maximum interface velocity that was “rounded” to varying degree. These profiles proved difficult to interpret unambiguously due to the convolution of the reactive wave upon first shock with reflection of the lead wave and reshock or release by the window. Comparison with thermochemical calculations strongly suggests that the point of maximum interface velocity corresponds to the equilibrium reshock or release locus. We discuss the implications of this point for the practice of impedance matching based on the reflected Hugoniot of reactive materials such as polymers. The reactant and thermochemical products equations of state are developmental SESAME tables 97710 and 97720, respectively.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

NASA NTRS1975

The University of Iowa Helios solar wind plasma wave experiment /E 5a/

This document describes the University of Iowa solar wind plasma wave experiment for the Helios missions (Experiment 5a). The objective of this experiment is the investigation of naturally occurring plasma instabilities and electromagnetic waves in the solar wind. To carry out this investigation, the experiment consists primarily of a 16-channel spectrum analyzer connected to the electric field antennas. The spectrum analyzer covers the frequency range from 20 Hz to 200 kHz and has an amplitude dynamic range which extends from .3 microvolts/m to 30 mV/m per channel. This spectrum analyzer, the antenna potential measurements, the shock alarm system and the supporting electronics are discussed in detail.

Gurnett, D. A.↗

DOE OSTI2021

High-pressure phase diagram of beryllium from ab initio free-energy calculations

In this report we use first-principles molecular dynamics simulations coupled with the thermodynamic integration method to study the hexagonal close-packed (hcp) to body-centered cubic (bcc) transition and melting of beryllium up to a pressure of 1600 GPa. We derive the melting line by equating solid and liquid Gibbs free energies and represent it by a Simon-Glatzel fit T m = 1564 K [1 + P/(15.6032 GPa)] 0.383 , which is in good agreement with previous two-phase simulations <6000 K. We also derive the hcp-bcc solid-solid phase boundary and show that the quasiharmonic approximation underestimates the stability of the hcp structure, predicting lower transition pressures between hcp and bcc phases. Our results are consistent with the stability regime predicted by the phonon quasiparticle method. We also predict that the hcp-bcc-liquid triple point is located at 164.7 GPa and 4314 K. In addition, we compute the shock Hugoniot curve and show that it is in good agreement with experiments, intersecting our derived melting curve at ~235 GPa and 4900 K. Finally, we make predictions for future ramp compression experiments. Starting with an isentropic compression of the liquid, we predict the path to intersect the melting line at low pressure and temperature, then to continue along the melting line over a large temperature interval of 7000 K as the sample remains in the mixed solid-liquid state before it enters the solid phase.

36 MATERIALS SCIENCE↗

NASA NTRS1986

Molecular dissociation and shock-induced cooling in fluid nitrogen at high densities and temperatures

Radiative temperatures and electrical conductivities were measured for fluid nitrogen compressed dynamically to pressures of 18-90 GPa, temperatures of 4000-14,000 K, and densities of 2-3 g/cu cm. The data show a continuous phase transition above 30 GPa shock pressure and confirm that (delta-P/delta-T)v is less than 0, as indicated previously by Hugoniot equation-of-state experiments. The first observation of shock-induced cooling is also reported. The data are interpreted in terms of molecular dissociation, and the concentration of dissociated molecules is calculated as a function of density and temperature.

Radousky, H. B.↗

NASA NTRS1982

Data reduction and analysis of ISEE magnetometer experiment

The ISEE-1 and -2 magnetometer data was reduced. The up and downstream turbulence associated with interplanetary shocks were studied, including methods of determining shock normals, and the similarities and differences in laminar and quasi-laminar shock structure. The associated up and downstream turbulence was emphasized. The distributions of flux transfer events, field aligned currents in the near tail, and substorm dynamics in the magnetotail were also investigated.

Russell, C. T.↗

DOE OSTI2022

Habitat‐adapted microbial communities mediate Sphagnum peatmoss resilience to warming

Summary Sphagnum peatmosses are fundamental members of peatland ecosystems, where they contribute to the uptake and long‐term storage of atmospheric carbon. Warming threatens Sphagnum mosses and is known to alter the composition of their associated microbiome. Here, we use a microbiome transfer approach to test if microbiome thermal origin influences host plant thermotolerance. We leveraged an experimental whole‐ecosystem warming study to collect field‐grown Sphagnum , mechanically separate the associated microbiome and then transfer onto germ‐free laboratory Sphagnum for temperature experiments. Host and microbiome dynamics were assessed with growth analysis, Chl a fluorescence imaging, metagenomics, metatranscriptomics and 16S rDNA profiling. Microbiomes originating from warming field conditions imparted enhanced thermotolerance and growth recovery at elevated temperatures. Metagenome and metatranscriptome analyses revealed that warming altered microbial community structure in a manner that induced the plant heat shock response, especially the HSP70 family and jasmonic acid production. The heat shock response was induced even without warming treatment in the laboratory, suggesting that the warm‐microbiome isolated from the field provided the host plant with thermal preconditioning. Our results demonstrate that microbes, which respond rapidly to temperature alterations, can play key roles in host plant growth response to rapidly changing environments.

59 BASIC BIOLOGICAL SCIENCES↗

DOE OSTI2024

The Computational Analysis of a Generic Hypersonic Store Separation

Many current hypersonic vehicles involve a main vehicle from which components separate during flight and presents simulation challenges such as shock-shock interactions, highly nonlinear interactions, and shock wave boundary layer interactions. These aerodynamic phenomena influence the attitude and trajectory of each object, which needs to be understood before large-scale experiments can be run. To gain a generic understanding of the process, high-fidelity Reynolds-averaged Navier-Stokes solutions are performed on a conical vehicle geometry passing through an oblique shock wave that is representative of different configurations and scenarios. Trajectory and applied forces are tracked and show the vehicle’s dynamics are predominantly the result of differential flow incidence angles causing a strong shock; this leads to a large pressure increase over a fraction of the vehicle, which influences pitch. The vehicle appears to follow conventional stability theory with detached eddy simulation and small disturbances in initial attitude shown to have minimal influence on the scenario.

Savery, Ryan↗

DOE OSTI2026

Phase Transitions of Eutectic High Entropy Alloy AlCoCrFeNi 2.1 Under Shock Compression

High entropy alloys (HEAs) are a new class of metals that exhibit unique mechanical performance. Among HEAs, additively manufactured eutectic high entropy alloys (AM EHEAs) have recently emerged as candidate materials for use in extreme conditions due to their simultaneous high strength and ductility. However, the deformation and structural evolution of AM EHEAs under conditions of high pressure have not been well characterized, limiting their use in extreme applications. Dynamic compression experiments and molecular dynamics simulations are presented to study the structural evolution of AM EHEA AlCoCrFeNi 2.1 when compressed to pressures up to 400 GPa. In situ X-ray diffraction measurements capture the appearance of face-centered cubic and body-centered cubic phases at different pressure conditions, with pure- and mixed-phase regions. Furthermore, understanding the phase stability and structural evolution of the AM EHEA offers new insights to guide the development of high-performance complex materials for extreme conditions.

36 MATERIALS SCIENCE↗

NASA NTRS1975

The magnetosheath electron population at lunar distance - General features

A study was made of the electron population in the earth's magnetosheath at lunar distance. The data used were collected by the Apollo 14 charged particle lunar environment experiment (CPLEE) during four inbound (dusk) and three outbound (dawn) passages of the moon through the magnetosheath. The magnetotail has a diameter of 52 earth radii, while the bow-shock cross section is about 91 earth radii. The average boundary locations computed from the complete data set are consistent with the prediction of fluid dynamics. The electron characteristics for the two least-disturbed passages are presented in detail. An examination of the energy spectra shows that a high-energy (200-2000 eV) tail is superimposed on the expected low-energy (40-200 eV) magnetosheath distribution. It is argued that the high-energy magnetosheath electron population originates at the bow shock, rather than from the plasma sheet.

Reiff, P. H.↗

NASA NTRS1972

Dynamics of the inverse pinch.

Experiments are performed on the plasma produced in a large inverse pinch using argon with no applied magnetic fields or preheating. A direct observation is made of the precursor ionization which initially raises the electron temperature and electrical conductivity. Calculations show that most of the mass is entrained in the current sheet, but that less than complete sweeping occurs at the lower velocities. The shock which is embedded in the current sheet closely resembles an ordinary gasdynamic shock. Consideration of the shock jump condition derived from the induction equation is shown to determine the frequent inability of the shock to separate from the current sheet.

Weisbach, M. F.↗

DOE OSTI2021

Polymorphism of gold under laser-based ramp compression to 690 GPa

The high-pressure behavior and polymorphism of gold has attracted strong recent interest from theory as well as from both static and dynamic experiments. In this study, gold was dynamically ramp-compressed to 690 GPa via laser ablation using the Omega Laser Facility (U. Rochester) in order to investigate the stability regions of this noble metal's polymorphs. Here, stresses were determined from measurements of surface or interface velocities by laser interferometry. In situ X-ray diffraction was carried out to constrain the structure and density. The ambient face-centered-cubic (fcc) phase was observed at 162 GPa, followed by a mixed phase region consisting of the fcc and body-centeredcubic (bcc). The presence of only the bcc phase was observed between 377 and 690 GPa. Our results are consistent with recent shock compression experiments and demonstrate that gold transforms to the bcc phase under conditions of both ramp and shock loading.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

NASA NTRS1974

Preliminary Pioneer 10 encounter results from the Ames Research Center plasma analyzer experiment

Preliminary results from the Ames Research Center plasma analyzer experiment for the Pioneer 10 Jupiter encounter indicate that Jupiter has a detached bow shock and magnetopause similar to the case at Earth but much larger in spatial extent. In contrast to Earth, Jupiter's outer magnetosphere appears to be highly inflated by thermal plasma and therefore highly responsive in size to changes in solar wind dynamic pressure.

Wolfe, J. H.↗

NASA NTRS1983

Implicit Total Variation Diminishing (TVD) schemes for steady-state calculations

The application of a new implicit unconditionally stable high resolution total variation diminishing (TVD) scheme to steady state calculations. It is a member of a one parameter family of explicit and implicit second order accurate schemes developed by Harten for the computation of weak solutions of hyperbolic conservation laws. This scheme is guaranteed not to generate spurious oscillations for a nonlinear scalar equation and a constant coefficient system. Numerical experiments show that this scheme not only has a rapid convergence rate, but also generates a highly resolved approximation to the steady state solution. A detailed implementation of the implicit scheme for the one and two dimensional compressible inviscid equations of gas dynamics is presented. Some numerical computations of one and two dimensional fluid flows containing shocks demonstrate the efficiency and accuracy of this new scheme.

Yee, H. C.↗

NASA NTRS1983

Implicit total variation diminishing (TVD) schemes for steady-state calculations

Yee, H. C.↗

NASA NTRS1992

Advanced ballistic range technology

Experimental interferograms, schlieren, and shadow-graphs are routinely used for validating ideal- and real-gas computational fluid dynamics (CFD) codes. Interferograms are used for quantitative comparisons of integrated density. Schlieren and shadowgraphs are used for comparing the locations of flow field features; the types of flowfield features recorded in these images include shocks, shear layers, and expansion fans. By constructing images from flow field simulations, one-to-one comparisons of computation and experiment are possible. During the period from 1 May 1991 to 31 Jan. 1992, the emphasis of this research was on developing techniques for constructing these images from flow field simulations.

Yates, Leslie A.↗

DOE OSTI2021

Equation of State Measurements on Iron Near the Melting Curve at Planetary Core Conditions by Shock and Ramp Compressions

The outer core of the Earth is composed primarily of liquid iron, and the inner core boundary is governed by the intersection of the melt line and the geotherm. While there are many studies on the thermodynamic equation of state for solid iron, the equation of state of liquid iron is relatively unexplored. In this work, we use dynamic compression to diagnose the high-pressure liquid equation of state of iron by utilizing the shock-ramp capability at Sandia National Laboratories’ Z-Machine. This technique enables measurements of material states off the Hugoniot by initially shocking samples and subsequently driving a further, shockless compression. Planetary studies benefit greatly from isentropic, off-Hugoniot experiments since they can cover pressure-temperature (P-T) conditions that are close to adiabatic profiles found in planetary interiors. We used this method to drive iron to P-T conditions similar to those of the Earth’s outer-inner core boundary, along an elevated-temperature isentrope in the liquid from 275 GPa to 400 GPa. We derive the equation of state using a hybrid backward integration – forward Lagrangian technique on particle velocity traces to determine the pressure-density history of the sample. Our results are in excellent agreement with SESAME 92141, a previously published equation of state table. With our data and previous experimental data on liquid iron we provide new information on the iron melting line and derive new parameters for a Vinet-based equation of state. The table and our parameterized equation of state are applied to provide an updated means of modeling the pressure, mass, and density of liquid iron cores in exoplanetary interiors.

58 GEOSCIENCES↗

NASA NTRS1990

Introduction to the internal fluid mechanics research session

Internal fluid mechanics research at LeRC is directed toward an improved understanding of the important flow physics affecting aerospace propulsion systems, and applying this improved understanding to formulate accurate predictive codes. To this end, research is conducted involving detailed experimentation and analysis. The following three papers summarize ongoing work and indicate future emphasis in three major research thrusts: inlets, ducts, and nozzles; turbomachinery; and chemical reacting flows. The underlying goal of the research in each of these areas is to bring internal computational fluid mechanic to a state of practical application for aerospace propulsion systems. Achievement of this goal requires that carefully planned and executed experiments be conducted in order to develop and validate useful codes. It is critical that numerical code development work and experimental work be closely coupled. The insights gained are represented by mathematical models that form the basis for code development. The resultant codes are then tested by comparing them with appropriate experiments in order to ensure their validity and determine their applicable range. The ultimate user community must be a part of this process to assure relevancy of the work and to hasten its practical application. Propulsion systems are characterized by highly complex and dynamic internal flows. Many complex, 3-D flow phenomena may be present, including unsteadiness, shocks, and chemical reactions. By focusing on specific portions of a propulsion system, it is often possible to identify the dominant phenomena that must be understood and modeled for obtaining accurate predictive capability. The three major research thrusts serve as a focus leading to greater understanding of the relevant physics and to an improvement in analytic tools. This in turn will hasten continued advancements in propulsion system performance and capability.

Miller, Brent A.↗