Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “direct synthesis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

A Boosted Critical Temperature of 166 K in Superconducting D 3 S Synthesized from Elemental Sulfur and Hydrogen

The discovery of superconductivity in H 3 S at 203 K marked an advance towards room-temperature superconductivity and demonstrated the potential of H-dominated compounds to possess a high critical temperature (T c ). There have been numerous reports of the H-S system over the last five years, but important questions remain unanswered. It is crucial to verify whether the Tc was determined correctly for samples prepared from compressed H 2 S, since they are inevitably contaminated with H-depleted byproducts. Here, we prepare stoichiometric H 3 S by direct in situ synthesis from elemental S and excess H 2 . The Im$_\bar{3}$ m phase of D 3 S samples exhibits a T c significantly higher than previously reported values (ca. 150 K), reaching a maximum T c of 166 K at 157 GPa. Furthermore, we confirm that the sharp decrease in T c below 150 GPa is accompanied by continuous rhombohedral structural distortions and demonstrate that the Cccm phase is nonmetallic, with molecular H 2 units in the crystal structure.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Strength mechanisms and tunability in Al-Ce-Mg ternary alloys enabled by additive manufacturing

Al-Ce-based alloys are promising candidates for additive manufacturing (AM) due to their hot-cracking resistance and because they do not require heat treatment to obtain precipitation strengthening. Rapid solidification rates enabled by AM methods can lead to enhanced mechanical properties; however, the strengthening mechanisms over large composition ranges were unclear. Here, combinatorial synthesis by directed-energy deposition (DED) and hardness measurements were used to rapidly map the composition-dependent strength of the ternary Al-Ce-Mg system. Tensile testing and microstructure characterization of selected compositions were performed to elucidate the compositional dependence of the strengthening mechanisms. Al 11 Ce 3 precipitates were present in all cases, and the maximum hardness (1.25 GPa) was measured for the Al-8Ce-10Mg composition. A combination of (i) Hall-Petch strengthening, based on the FCC-matrix-phase cell size; (ii) particle strengthening, based on Al 11 Ce 3 volume fraction and size; and (iii) solid-solution strengthening, based on Mg composition of the matrix phase, were used to account for the measured strengths. Vickers hardness is shown to correlate well with ultimate tensile strength in these alloys, highlighting the value of surface-based techniques for rapid screening.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Examination of Replicate Syntheses of Metal Organic Frameworks as a Window into Reproducibility in Materials Chemistry

Replicate experiments are a useful tool in understanding the repeatability of scientific measurements. In 2019, a systematic search for replicate syntheses of a collection of 130 metal–organic frameworks (MOFs) found that 89% of these materials had no reported replicate syntheses apart from the original publications identifying the material (Agrawal, M. Proc. Natl. Acad. Sci. U.S.A. 2020, 117, 877−88210.1073/pnas.1918484117). A potential weakness of that search was that only 5–11 years had elapsed since the original publication of each material. Here, this analysis is extended to all publications 11–17 years after the original publication. Although this extended time period identifies more repeat syntheses, 83% of the materials still have no reported replicate syntheses. We also consider how appropriately selected Density Functional Theory (DFT) calculations can provide corroboration for the experimentally reported crystal structures. By using data from previous high-throughput DFT studies, corroborating evidence from DFT was available for 17% of the 130 structures for which no replicate syntheses are available. In total, approximately 1/3 of the 130 MOFs have data associated with replicate synthesis experiments and/or directly corroborating DFT calculations.

Sholl, David S. [Oak Ridge National Laboratory (OR↗
DOE OSTI2021

van der Waals Epitaxy Growth of Bi 2 Se 3 on a Freestanding Monolayer Graphene Membrane: Implications for Layered Materials and Heterostructures

Research on two-dimensional and layered materials has expanded over the past 2 decades because of their unique properties and application potential. The key hurdles in realizing this potential are the challenges in controlling their atomic structure and their incompatibility with existing semiconductor nanofabrication techniques. Here we report on high-quality van der Waals epitaxial growth and characterization of a layered topological insulator on freestanding monolayer graphene transferred to different mechanical supports. This “templated” synthesis approach enables direct interrogation of the interfacial atomic structure of the as-grown materials and opens a route toward creating device structures with more traditional semiconductor nanofabrication techniques.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Pseudo-atomic orbital behavior in graphene nanoribbons with four-membered rings

The incorporation of nonhexagonal rings into graphene nanoribbons (GNRs) is an effective strategy for engineering localized electronic states, bandgaps, and magnetic properties. Here, we demonstrate the successful synthesis of nanoribbons having four-membered ring (cyclobutadienoid) linkages by using an on-surface synthesis approach involving direct contact transfer of coronene-type precursors followed by thermally assisted [2 + 2] cycloaddition. The resulting coronene-cyclobutadienoid nanoribbons feature a narrow 600-meV bandgap and novel electronic frontier states that can be interpreted as linear chains of effective p x and p y pseudo-atomic orbitals. We show that these states give rise to exceptional physical properties, such as a rigid indirect energy gap. This provides a previously unexplored strategy for constructing narrow gap GNRs via modification of precursor molecules whose function is to modulate the coupling between adjacent four-membered ring states.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2021

Harnessing autocatalytic reactions in polymerization and depolymerization

Abstract Autocatalysis and its relevance to various polymeric systems are discussed by taking inspiration from biology. A number of research directions related to synthesis, characterization, and multi-scale modeling are discussed in order to harness autocatalytic reactions in a useful manner for different applications ranging from chemical upcycling of polymers (depolymerization and reconstruction after depolymerization), self-generating micelles and vesicles, and polymer membranes. Overall, a concerted effort involving in situ experiments, multi-scale modeling, and machine learning algorithms is proposed to understand the mechanisms of physical and chemical autocatalysis. It is argued that a control of the autocatalytic behavior in polymeric systems can revolutionize areas such as kinetic control of the self-assembly of polymeric materials, synthesis of self-healing and self-immolative polymers, as next generation of materials for a sustainable circular economy. Graphic Abstract

36 MATERIALS SCIENCE↗
DOE OSTI2026

Influence of cellular redox reactions on the structure and function of light harvesting and photosystems

Photosynthesis enables the conversion of one of the most abundant and free forms of energy, sunlight, into chemical bonds through the utilization of highly tailored protein complexes. These enzymes work in unison to absorb, convert, and transform light into high-energy electrons which are used for various functions important to metabolism and cellular protection. Over the last ∼50 years, photosynthetic organisms, such as cyanobacteria, have been adapted and engineered to produce valuable compounds like hydrogen and ethylene, among others. Often this is performed by removing native and/or adding in exogenous energy utilization pathways so that light energy is re-directed towards the synthesis of desired compounds. However, the interplay between primary light capture, conversion reactions, and the downstream electron utilization sinks is not fully understood. Further complicating these strategies are the plethora of compensatory mechanisms that facilitate steady electron flow and the maintenance of photosynthesis under dynamic conditions. This manifests as structural and functional plasticity of the photosynthetic machinery, often seen in modulations of oligomeric compositions or changes in protein-protein interactions and coupling with redox enzymes. Understanding these mechanisms is crucial to biotechnology applications because re-engineering electron utilization sinks has profoundly different effects on the light capture and conversion reactions of photosynthesis. Optimization requires a molecular-level understanding of the functional interrelationships between electron sinks and photosynthetic components that influence photosynthetic efficiencies to realize potential improvements in product yields. Here, we aim to highlight how perturbation of reductive reactions is revealing the functional plasticity in key components of the photosynthetic energy transduction pathway.

59 BASIC BIOLOGICAL SCIENCES↗
NASA NTRS1972

A thin polymer insulator for Josephson tunneling applications

The progress made towards forming thin organic layers on superconductors and how these layers effect the transition temperature is discussed. The work was primarily directed towards 1) synthesis of the organics, 2) deposition of organics, and 3) setting up to make transition temperature measurements. The greatest effort was placed on synthesis, and most of the synthesis procedures are now perfected.

Wilmsen, C. W.↗
NASA NTRS1974

The temporal organization of processes of cell reproduction and its connection with rhythms of radiosensitivity of the body

Radiosensitivity of individual phases of the mitotic cycle was studied in synchronous cell cultures and in several biological objects. It was found that radiosensitivity changed essentially according to phases of the mitotic cycle, depending on the kind of cells, evaluation criteria and the radiation dosage. Tests on partially synchronized HeLa cell populations, according to the criterion of survival, showed them most sensitive during mitosis, as well as in later G sub 1- or early DNA-synthesizing stages. With radiation in doses of 300 rad, the proportion of surviving cells showed a sensitivity directly before DNA synthesis of approximately 4 times higher than the later S-phase and during the major portion of G sub 1- and G sub 2-periods. Sensitivity of cells in mitosis was approximately 3 times higher than in late G sub 1- and early S-phases.

Druzhinin, Y. P.↗
NASA NTRS1976

Analytical display design for flight tasks conducted under instrument meteorological conditions

Paramount to proper utilization of electronic displays is a method for determining pilot-centered display requirements. Display design should be viewed fundamentally as a guidance and control problem which has interactions with the designer's knowledge of human psychomotor activity. From this standpoint, reliable analytical models of human pilots as information processors and controllers can provide valuable insight into the display design process. A relatively straightforward, nearly algorithmic procedure for deriving model-based, pilot-centered display requirements was developed and is presented. The optimal or control theoretic pilot model serves as the backbone of the design methodology, which is specifically directed toward the synthesis of head-down, electronic, cockpit display formats. Some novel applications of the optimal pilot model are discussed. An analytical design example is offered which defines a format for the electronic display to be used in a UH-1H helicopter in a landing approach task involving longitudinal and lateral degrees of freedom.

Hess, R. A.↗
NASA NTRS1977

Analytical display design for flight tasks conducted under instrument meteorological conditions

A relatively straightforward, nearly algorithmic procedure for deriving model-based pilot-centered display requirements is presented. A pilot model based on modern control theory serves as the backbone of the design methodology, which is specifically directed toward the synthesis of head-down, electronic cockpit display formats. Some novel applications of the optimal pilot model are discussed, including the generation of vehicle-handling-qualities levels via numerical pilot-opinion ratings. An analytical design example is offered which aids in the definition of a format for the electronic display to be used in a UH-1H helicopter in a landing-approach task involving longitudinal and lateral degrees of freedom. It is proposed that the design procedure offers a systematic means for generating candidate display formats and flight-director laws for simulator evaluation.

Hess, R. A.↗
NASA NTRS1991

Nonlinear optical properties of organic materials: A theoretical study

Replacement of electronic switching circuits in computing and telecommunication systems with purely optical devices offers the potential for extremely high throughput and compact information processing systems. The potential application of organic materials containing molecules with large nonresonant nonlinear effects in this area have triggered intensive research during the last decade. Interest on this area was due to two facts: (1) that many organic materials show nonlinearities that are orders of magnitude larger than those of conventional inorganic materials such as lithium niobate and potassium dihydrogen phosphate; and (2) that organic materials show much flexibility in terms of molecular designs. Some of the desirable characteristics that these materials should have are that they be transparent to the frequency of the incident laser and its second or third harmonic, that they have a high damage threshold, and, in the case of second-order effects, that their crystal structure or molecular orientation be accentric. Since polymeric assemblages can enhance the nonlinear response of organic molecules severalfold, efforts have been directed toward the synthesis of thin films with interpenetrating lattices of electroactive molecules. The goal of this theoretical investigation is to predict the magnitude of the molecular polarizabilities of organic molecules that could be incorporated into films. These calculations are intended to become a powerful tool to assist material scientists in screening for the best candidates for optical applications. The procedure that was developed for the present calculations is based on the static-field approach, and is a modification to the method developed by Dewar and Stewart, 1984 for calculating molecular linear polarizabilities.

Cardelino, Beatriz H.↗
NASA NTRS1991

Optical system design for a Lunar Optical Interferometer

The moon offers particular advantages for interferometry, including a vacuum environment, a large stable base on which to assemble multi-kilometer baselines, and a cold nighttime temperature to allow for passive cooling of optics for high IR sensitivity. A baseline design for a Lunar Optical Interferometer (LOI) which exploits these features is presented. The instrument operates in the visible to mid-IL region, and is designed for both astrometry and synthesis imaging. The design uses a Y-shaped array of 12 siderostats, with maximum arm lengths of about 1 km. The inner siderostats are monitored in three dimensions from a central laser metrology structure to allow for high precision astrometry. The outer siderostats, used primarily for synthesis imaging, exploit the availability of bright reference stars in order to determine the instrument geometry. The path delay function is partitioned into coarse and fine components, the former accomplished with switched banks of range mirrors monitored with an absolute laser metrology system, and the latter with a short cat's eye delay line. The back end of the instrument is modular, allowing for beam combiners for astrometry, visible and IR synthesis imaging, and direct planet detection. With 1 m apertures, the instrument will have a point-source imaging sensitivity of about 29 mag; with the laser metrology system, astrometry at the microarcsecond level will be possible.

Colavita, M. M.↗
NASA NTRS1993

Trifluoromethyl-substituted polymers

Current work sponsored by the grant at Southwest Texas State University is directed toward the synthesis and characterization of: (1) N-alkylated polyamides derived from o-fluorinated diacids; (2) highly fluorinated polyethers; (3) polyesters derived from 2-hydroxy-2-propyl substituted arenes and/or 2,5-difluoroterephthalic acid; and (4) silicon-containing fluoropolymers. Work during the period from 1 July to 31 Dec. 1993 focused primarily on items 3 and 4 and on the development of a phosphorus containing modification of '12F-PEK.'

Source record↗
NASA NTRS2001

Automatic Debugging Support for UML Designs

Design of large software systems requires rigorous application of software engineering methods covering all phases of the software process. Debugging during the early design phases is extremely important, because late bug-fixes are expensive. In this paper, we describe an approach which facilitates debugging of UML requirements and designs. The Unified Modeling Language (UML) is a set of notations for object-orient design of a software system. We have developed an algorithm which translates requirement specifications in the form of annotated sequence diagrams into structured statecharts. This algorithm detects conflicts between sequence diagrams and inconsistencies in the domain knowledge. After synthesizing statecharts from sequence diagrams, these statecharts usually are subject to manual modification and refinement. By using the "backward" direction of our synthesis algorithm. we are able to map modifications made to the statechart back into the requirements (sequence diagrams) and check for conflicts there. Fed back to the user conflicts detected by our algorithm are the basis for deductive-based debugging of requirements and domain theory in very early development stages. Our approach allows to generate explanations oil why there is a conflict and which parts of the specifications are affected.

Schumann, Johann↗
NASA NTRS2000

Gas storage using fullerene based adsorbents

This invention is directed to the synthesis of high bulk density high gas absorption capacity adsorbents for gas storage applications. Specifically, this invention is concerned with novel gas absorbents with high gravimetric and volumetric gas adsorption capacities which are made from fullerene-based materials. By pressing fullerene powder into pellet form using a conventional press, then polymerizing it by subjecting the fullerene to high temperature and high inert gas pressure, the resulting fullerene-based materials have high bulk densities and high gas adsorption capacities. By pre-chemical modification or post-polymerization activation processes, the gas adsorption capacities of the fullerene-based adsorbents can be further enhanced. These materials are suitable for low pressure gas storage applications, such as oxygen storage for home oxygen therapy uses or on-board vehicle natural gas storage. They are also suitable for storing gases and vapors such as hydrogen, nitrogen, carbon dioxide, and water vapor.

Loutfy, Raouf O.↗
DOE OSTI2025

Novel Synthesis and Characterization of Uranium-Zirconium Carbonitride by Direct Casting

UZrCN has exhibited thermophysical properties beneficial to high temperature reactor applications such as nuclear thermal rockets. The present work investigates a novel liquid phase synthesis method involving the admission of nitrogen gas during arc melting of uranium, zirconium, and carbon. Initial microstructural examinations using SEM indicated that the samples remain heterogenous with zirconium-rich cores in a uranium-rich matrix. Heterogeneity resulted from large differences in melting temperature of the major constituents and rapid solidification. Additional EDS, combustion analysis, and inert gas fusion analysis proved that the core regions have both uranium and zirconium and establish that carbon and nitrogen are retained during the fabrication process. XRD clarifies that the light elements did not form compounds with the uranium matrix but rather incorporated into the core region forming a sub-stoichiometric UZrCN. Heat treatment performed on equimolar U-Zr-C resulted in an increase in the homogenous phase present with an XRD pattern reflecting a ternary UZrCN despite small amounts of segregation in the final button.

36 - MATERIALS SCIENCE↗
DOE OSTI2021

Controlled Fabrication of Quality ZnO NWs/CNTs and ZnO NWs/Gr Heterostructures via Direct Two-Step CVD Method

A novel and advanced approach of growing zinc oxide nanowires (ZnO NWs) directly on single-walled carbon nanotubes (SWCNTs) and graphene (Gr) surfaces has been demonstrated through the successful formation of 1D–1D and 1D–2D heterostructure interfaces. The direct two-step chemical vapor deposition (CVD) method was utilized to ensure high-quality materials’ synthesis and scalable production of different architectures. Iron-based universal compound molecular ink was used as a catalyst in both processes (a) to form a monolayer of horizontally defined networks of SWCNTs interfaced with vertically oriented ZnO NWs and (b) to grow densely packed ZnO NWs directly on a graphene surface. We show here that our universal compound molecular ink is efficient and selective in the direct synthesis of ZnO NWs/CNTs and ZnO NWs/Gr heterostructures. Heterostructures were also selectively patterned through different fabrication techniques and grown in predefined locations, demonstrating an ability to control materials’ placement and morphology. Several characterization tools were employed to interrogate the prepared heterostructures. ZnO NWs were shown to grow uniformly over the network of SWCNTs, and much denser packed vertically oriented ZnO NWs were produced on graphene thin films. Such heterostructures can be used widely in many potential applications, such as photocatalysts, supercapacitors, solar cells, piezoelectric or thermal actuators, as well as chemical or biological sensors.

77 NANOSCIENCE AND NANOTECHNOLOGY↗