Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “design rationale”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14
All sourcesNASA NTRSDOE OSTI
NASA NTRS1985

Analytical and physical modeling program for the NASA Lewis Research Center's Altitude Wind Tunnel (AWT)

An effort is currently underway at the NASA Lewis Research Center to rehabilitate and extend the capabilities of the Altitude Wind Tunnel (AWT). This extended capability will include a maximum test section Mach number of about 0.9 at an altitude of 55,000 ft and a -20 F stagnation temperature (octagonal test section, 20 ft across the flats). In addition, the AWT will include an icing and acoustic research capability. In order to insure a technically sound design, an AWT modeling program (both analytical and physical) was initiated to provide essential input to the AWT final design process. This paper describes the modeling program, including the rationale and criteria used in program definition, and presents some early program results.

Abbott, J. M.↗
NASA NTRS1991

A general software reliability process simulation technique

The structure and rationale of the generalized software reliability process, together with the design and implementation of a computer program that simulates this process are described. Given assumed parameters of a particular project, the users of this program are able to generate simulated status timelines of work products, numbers of injected anomalies, and the progress of testing, fault isolation, repair, validation, and retest. Such timelines are useful in comparison with actual timeline data, for validating the project input parameters, and for providing data for researchers in reliability prediction modeling.

Tausworthe, Robert C.↗
NASA NTRS2014

Summary of NDE of Additive Manufacturing Efforts in NASA

(1) General Rationale for Additive Manufacturing (AM): (a) Operate under a 'design-to-constraint' paradigm, make parts too complicated to fabricate otherwise, (b) Reduce weight by 20 percent with monolithic parts, (c) Reduce waste (green manufacturing), (e) Eliminate reliance on Original Equipment Manufacturers for critical spares, and (f) Extend life of in-service parts by innovative repair methods; (2) NASA OSMA NDE of AM State-of-the-Discipline Report; (3) Overview of NASA AM Efforts at Various Centers: (a) Analytical Tools, (b) Ground-Based Fabrication (c) Space-Based Fabrication; and (d) Center Activity Summaries; (4) Overview of NASA NDE data to date on AM parts; and (5) Gap Analysis/Recommendations for NDE of AM.

Waller, Jess↗
NASA NTRS1988

The development of a cislunar space infrastructure

The primary objective of the University of Colorado Advanced Mission Design Program is to define the characteristics and evolution of a near-Earth space infrastructure. The envisioned foundation includes a permanently manned, self-sustaining base on the lunar surface, an L1 space station, and a transportation system that anchors these elements to a low Earth orbit (LEO) station. The motivation of this project was based on the idea that a near-Earth space infrastructure is not an end but an important step in a larger plan to expand man's capabilities in space science and technology. The presence of a cislunar space infrastructure would greatly facilitate the staging of future planetary missions, as well as facilitating the full exploration of the potential for science and industry on the lunar surface. This paper will provide a sound rationale and a detailed scenario in support of the cislunar infrastructure design.

Source record↗
NASA NTRS1977

Mass drivers. 1: Electrical design

A mass driver is an electrical device used to accelerate payloads of any material to a high velocity. Small vehicles (called buckets) containing superconducting coils carry the payloads. These buckets are accelerated by pulsed magnetic fields, timed by information on their position, and are guided by induced magnetic fields set up in a surrounding guideway. Upon reaching the correct velocity, the buckets release their payloads, then they are slowed for recirculation to be reused. A rationale is presented that leads to a relatively simple and near-optimum design, as well as basic programs for calculating acceleration. The transverse oscillation frequencies are found to be invariant to guideway transverse dimensions.

William H. Arnold↗
NASA NTRS1977

Design and development of a structural mode control system

A program was conducted to compile and document some of the existing information about the conceptual design, development, and tests of the B-1 structural mode control system (SMCS) and its impact on ride quality. This report covers the following topics: (1) Rationale of selection of SMCS to meet ride quality criteria versus basic aircraft stiffening. (2) Key considerations in designing an SMCS, including vane geometry, rate and deflection requirements, power required, compensation network design, and fail-safe requirements. (3) Summary of key results of SMCS vane wind tunnel tests. (4) SMCS performance. (5) SMCS design details, including materials, bearings, and actuators. (6) Results of qualification testing of SMCS on the "Iron Bird" flight control simulator, and lab qualification testing of the actuators. (7) Impact of SMCS vanes on engine inlet characteristics from wind tunnel tests.

Source record↗
DOE OSTI2026

Economics of land‐based carbon mitigation

Agricultural land holds tremendous potential to contribute to net zero greenhouse gas emission goals by providing low carbon renewable energy to displace fossil fuels and by serving as a sink for sequestering carbon in the soil with climate‐smart practices. This potential is, however, far from being realized. This paper examines the economic incentives and barriers to implementing land‐based carbon mitigation strategies and discusses the specific features of land‐based carbon mitigation practices on carbon emissions that need to be considered in designing policy incentives to induce adoption. Although a carbon price‐based policy is socially efficient, the more commonly observed policies to promote land‐based carbon mitigation include practice‐based conservation programs, technology mandates, and sector‐specific standards. The paper discusses the rationale for these alternative policy approaches and concludes with a discussion of emerging opportunities for designing policy and market‐based approaches for promoting land‐based carbon‐mitigation and future directions for economics research.

additionality↗
NASA NTRS1980

LACIE - An application of meteorology for United States and foreign wheat assessment

This paper describes the overall Large Area Crop Inventory Experiment technical approach utilizing the global weather-reporting network and the Landsat satellite to make a quasi-operational application of existing research results, and the accomplishments of this cooperative experiment in utilizing the weather information. Global weather data were utilized in preparing timely yield estimates for selected areas of the U.S. Great Plains, the U.S.S.R. and Canada. Additionally, wheat yield models were developed and pilot tested for Brazil, Australia, India and Argentina. The results of the work show that heading dates for wheat in North America can be predicted with an average absolute error of about 5 days for winter wheat and 4 days for spring wheat. Independent tests of wheat yield models over a 10-year period for the U.S. Great Plains produced a root-mean-square error of 1.12 quintals per hectare (q/ha) while similar tests in the U.S.S.R. produced an error of 1.31 q/ha. Research designed to improve the initial capability is described as is the rationale for further evolution of a capability to monitor global climate and assess its impact on world food supplies.

Hill, J. D.↗
NASA NTRS1982

Space shuttle wind tunnel testing program

The wind tunnel testing rationale and the associated test program management plan for the STS design and development stage are reviewed. Noting that estimates of the total ground testing facilities needed exceeded any previous program for an aircraft or space vehicle, tests were intended to cover launch, separation, and entry. An Orbiter flight profile is outlined, and the aerodynamic, aerothermodynamic, and structural dynamics testing objectives for launch, Orbiter, and ferry concepts are explored. The division of the STS development tasks between the Johnson Space Center and the Marshall Space Flight Center also included the formation of a coordinating panel with representatives of various wind tunnel programs and other phases of the STS development program. A total of 42,200 wind tunnel hr were used for the Shuttle development, with an additional 23,000 run in NASA supporting centers.

Whitnah, A. M.↗
NASA NTRS1984

Performance measurement of low concentration ratio solar array for space application

The measured performance of a silicon and a gallium arsenide low concentration ratio solar array (LCRSA) element is presented. The element characteristics measured in natural sunlight are off pointing performance and response to mechanical distortions. Laboratory measurements of individual silicon and gallium-arsenide solar cell assemblies are also made. The characteristics measured in the laboratory involved responses to temperature and intensity variations as well as to the application of reverse bias potentials. The element design details covered include the materials, the solar cells, and the rationale for selecting these specific characteristics. The measured performance characteristics are contrasted with the predicted values for both laboratory testing and high altitude natural sunlight testing. Excellent agreement between analytical predictions and measured performance is observed.

Mills, M. W.↗
NASA NTRS1989

Middeck Active Control Experiment (MACE), phase A

A rationale to determine which structural experiments are sufficient to verify the design of structures employing Controlled Structures Technology was derived. A survey of proposed NASA missions was undertaken to identify candidate test articles for use in the Middeck Active Control Experiment (MACE). The survey revealed that potential test articles could be classified into one of three roles: development, demonstration, and qualification, depending on the maturity of the technology and the mission the structure must fulfill. A set of criteria was derived that allowed determination of which role a potential test article must fulfill. A review of the capabilities and limitations of the STS middeck was conducted. A reference design for the MACE test article was presented. Computing requirements for running typical closed-loop controllers was determined, and various computer configurations were studied. The various components required to manufacture the structure were identified. A management plan was established for the remainder of the program experiment development, flight and ground systems development, and integration to the carrier. Procedures for configuration control, fiscal control, and safety, reliabilty, and quality assurance were developed.

Crawley, Edward F.↗
NASA NTRS2018

Double Asteroid Redirection Test (DART) Mission Design and Navigation for Low Energy Escape

This paper describes the evolution of the NASA Double Asteroid Redirection Test (DART) mission design and navigation. Specifically, the mission has been conceived as (1) a hydrazine bus on a ballistic trajectory, (2) a low-thrust bus launching from a geostationary transfer orbit and spiraling to escape, and (3) a lowthrust bus that launches with a small positive escape energy. This paper discusses the rationale in favor of the third concept, low energy escape, and describes the key mission design and navigation studies. In an effort to be compatible with an unknown co-manifest partner, the trajectory design must account for a large range of launch energies, orientations, and dates. The navigation approach must account for sensitive regions in the trajectory and plan for both low-thrust and chemical phases of flight. These findings are relevant to other missions pursuing low-cost interplanetary rideshare concepts.

Grebow, Daniel↗
DOE OSTI2024

Assessment of simulated and observed cavitation-induced erosion damage in Spallation Neutron Source target vessels

Cavitation-induced erosion damage in different Spallation Neutron Source (SNS) target designs are simulated using explicit finite element–based techniques and compared with observations of erosion in targets after operation. The efficacy of the previously developed method, called saturation time, was evaluated using erosion-damaged samples from new target designs. A new metric called maximum bubble size was implemented under the rationale that larger cavitation bubbles will collapse more intensely. The maximum cavitation bubble size over 1 ms of simulated time was calculated based on the Rayleigh–Plesset equation for each element integration point and presented as a contour map at the vessel surface for assessing with erosion observations. SNS targets are now operated with helium gas injection to reduce cavitation damage. A simulation method using a material model for the mixture of mercury and gas bubbles was recently developed and used to account for the effect of small gas bubbles on the structural response of the target vessel. Furthermore, this work compares the new method's results with observed cavitation damage. Maps of the calculated maximum bubble size for targets operated with and without gas injection were compared with photographs of erosion damage observed in SNS targets. The patterns in maximum bubble size maps correlated well with observations of erosion patterns in target vessels after service. Advantages and challenges of the maximum bubble size simulation technique are provided, and differences between results from the previous and the newly proposed metric are discussed.

Jiang, Hao↗
DOE OSTI2020

Early Phase Molten Salt Reactor Safety Evaluation Considerations

This report documents rationale to develop analytical tools and data applicable to the safety and design of advanced molten salt power reactors. This report represents early steps in the implementation of the tasks defined by Oak Ridge National Laboratory (ORNL) in 2018 in the following sections of A Safety and Licensing Roadmap to identify the Research and Development Gaps of Commercial Molten Salt Reactors

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
NASA NTRS1992

An improved approach for flight readiness certification: Probabilistic models for flaw propagation and turbine blade failure. Volume 1: Methodology and applications

An improved methodology for quantitatively evaluating failure risk of spaceflight systems to assess flight readiness and identify risk control measures is presented. This methodology, called Probabilistic Failure Assessment (PFA), combines operating experience from tests and flights with analytical modeling of failure phenomena to estimate failure risk. The PFA methodology is of particular value when information on which to base an assessment of failure risk, including test experience and knowledge of parameters used in analytical modeling, is expensive or difficult to acquire. The PFA methodology is a prescribed statistical structure in which analytical models that characterize failure phenomena are used conjointly with uncertainties about analysis parameters and/or modeling accuracy to estimate failure probability distributions for specific failure modes. These distributions can then be modified, by means of statistical procedures of the PFA methodology, to reflect any test or flight experience. State-of-the-art analytical models currently employed for designs failure prediction, or performance analysis are used in this methodology. The rationale for the statistical approach taken in the PFA methodology is discussed, the PFA methodology is described, and examples of its application to structural failure modes are presented. The engineering models and computer software used in fatigue crack growth and fatigue crack initiation applications are thoroughly documented.

Moore, N. R.↗