Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “design considerations”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14
All sourcesNASA NTRSDOE OSTI
NASA NTRS1983

Some dynamical design considerations for momentum biased spacecraft

This paper discusses some of the dynamical aspects that affect the attitude behavior of a spacecraft placed in a near earth polar orbit. The parameters such as atmospheric density variation, super-rotation of upper atmosphere, pitch equilibrium angle, and trim boom length selection to reduce pitch axis drift are considered. These parameters are studied with reference to two momentum biased satellities (Magsat and Dynamics Explorer-2) and the analyses are correlated with observed flight data. It is found that the design model of certain parameters has to be improved by including other phenomena so that flight data and the analytical model predictions have good correlations. The effects of mass imbalance on the orbital and nutational modes of the spacecraft attitude are discussed.

Sellappan, R. G.↗
NASA NTRS1983

Source circuit design considerations

The cost of several circuit configurations for large (5MW) array fields were investigated to assess the relative costs of high and low voltage configurations. Three source circuit NOC voltages were evaluated: 400V (ungrounded), 800V (+ or 400V center grounded), and 2000V (+ or - 1000V center grounded). Four source circuit configurations were considered for each of the three NOC voltages. The configurations correspond to source circuit currents of 15, 30, 45, and 60 amperes, respectively. Conceptual layouts for 5MW building blocks for each of the above configurations were developed. The designs were optimized to minimize BOS electrical and structural costs. Only the BOS electrical costs were evaluated. The designs were broken down into the following elements for cost: (1) basic source circuit intermodule wiring, bypass diodes and associated hardware, source circuit to J-Box wiring, etc; (2) J-Box blocking diodes, varistors, heat sinks, and housing; (3) disconnects source circuit disconnects, fuses, and housing; (4) bus cabling J-Box to PCU interface wiring, and trenching; (5) interface bus bar, group disconnects, and fuses; and (6) fault detection shunts, signal wire, electronics, and alarm. It is concluded that high voltage low current circuits are not economical, at higher currents high and low voltage circuit costs approach each other, high voltage circuits are not likely to offer near term advantage, and development work/manufacturer stimulation is needed to develop low cost high voltage hardware.

Noel, G. T.↗
NASA NTRS1994

Facility design consideration for continuous mix production of class 1.3 propellant

In November of 1989, NASA awarded the Advanced Solid Rocket Motor (ASRM) contract to Lockheed Missiles and Space Company (LMSC) for production of advanced solid rocket motors using the continuous mix process. Aerojet ASRM division (AAD) was selected as the facility operator and RUST International Corporation provided the engineering, procurement, and construction management services. The continuous mix process mandates that the mix and cast facilities be 'close-coupled' along with the premix facilities, creating unique and challenging requirements for the facility designer. The classical approach to handling energetic materials-division into manageable quantities, segregation, and isolation-was not available due to these process requirements and quantities involved. This paper provides a description of the physical facilities, the continuous mix process, and discusses the monitoring and detection techniques used to mitigate hazards and prevent an incident.

Williamson, K. L.↗
NASA NTRS1981

Key space telescope design considerations

The Space Telescope (ST), a 2.4 meter aperture astronomical telescope, will be launched into low earth orbit by the Space Shuttle in the mid-1980's. This high resolution telescope will be capable of operating from Lyman-alpha (121.6 nm) through the near infrared; support five different scientific instruments at its focal plane (two cameras, two spectrographs, and one photometer); and by periodic on-orbit servicing and ground refurbishment be able to operate with technologically current scientific instruments for at least 15 years. This paper identifies the critical Space Telescope design requirements and describes design techniques which were selected to satisfy these requirements.

Olivier, J. R.↗
NASA NTRS1992

Design considerations for an air core magnetic actuator

Equations for the force produced by an air core electromagnet on a permanent magnet core as a function of the coil height, coil inner and outer radii, and core displacement are developed. The magnetization vector of the permanent magnet core is assumed to be aligned with the central axis of the electromagnet and the forces which are produced lie along the same axis. Variations in force due to changes in electromagnet parameters and core displacement are investigated and parameter plots which should be useful for coil design are presented.

Groom, Nelson J.↗
NASA NTRS1994

Design considerations for parallel graphics libraries

Applications which run on parallel supercomputers are often characterized by massive datasets. Converting these vast collections of numbers to visual form has proven to be a powerful aid to comprehension. For a variety of reasons, it may be desirable to provide this visual feedback at runtime. One way to accomplish this is to exploit the available parallelism to perform graphics operations in place. In order to do this, we need appropriate parallel rendering algorithms and library interfaces. This paper provides a tutorial introduction to some of the issues which arise in designing parallel graphics libraries and their underlying rendering algorithms. The focus is on polygon rendering for distributed memory message-passing systems. We illustrate our discussion with examples from PGL, a parallel graphics library which has been developed on the Intel family of parallel systems.

Crockett, Thomas W.↗
NASA NTRS2001

Phase 1 Space Fission Propulsion System Design Considerations

Fission technology can enable rapid, affordable access to any point in the solar system. If fission propulsion systems are to be developed to their full potential; however, near-term customers must be identified and initial fission systems successfully developed, launched, and operated. Studies conducted in fiscal year 2001 (IISTP, 2001) show that fission electric propulsion (FEP) systems operating at 80 kWe or above could enhance or enable numerous robotic outer solar system missions of interest. At these power levels it is possible to develop safe, affordable systems that meet mission performance requirements. In selecting the system design to pursue, seven evaluation criteria were identified: safety, reliability, testability, specific mass, cost, schedule, and programmatic risk. A top-level comparison of three potential concepts was performed: an SP-100 based pumped liquid lithium system, a direct gas cooled system, and a heatpipe cooled system. For power levels up to at least 500 kWt (enabling electric power levels of 125-175 kWe, given 25-35% power conversion efficiency) the heatpipe system has advantages related to several criteria and is competitive with respect to all. Hardware-based research and development has further increased confidence in the heatpipe approach. Successful development and utilization of a "Phase 1" fission electric propulsion system will enable advanced Phase 2 and Phase 3 systems capable of providing rapid, affordable access to any point in the solar system.

Houts, Mike↗
NASA NTRS2013

Design Considerations for Ceramic Matrix Composite Vanes for High Pressure Turbine Applications

Issues associated with replacing conventional metallic vanes with Ceramic Matrix Composite (CMC) vanes in the first stage of the High Pressure Turbine (HPT) are explored. CMC materials have higher temperature capability than conventional HPT vanes, and less vane cooling is required. The benefits of less vane coolant are less NOx production and improved vane efficiency. Comparisons between CMC and metal vanes are made at current rotor inlet temperatures and at an vane inlet pressure of 50 atm.. CMC materials have directionally dependent strength characteristics, and vane designs must accommodate these characteristics. The benefits of reduced NOx and improved cycle efficiency obtainable from using CMC vanes. are quantified Results are given for vane shapes made of a two dimensional CMC weave. Stress components due to thermal and pressure loads are shown for all configurations. The effects on stresses of: (1) a rib connecting vane pressure and suction surfaces; (2) variation in wall thickness; and (3) trailing edge region cooling options are discussed. The approach used to obtain vane temperature distributions is discussed. Film cooling and trailing edge ejection were required to avoid excessive vane material temperature gradients. Stresses due to temperature gradients are sometimes compressive in regions where pressure loads result in high tensile stresses.

Boyle, Robert J.↗
NASA NTRS2009

Lunar Navigation Architecture Design Considerations

The NASA Constellation Program is aiming to establish a long-term presence on the lunar surface. The Constellation elements (Orion, Altair, Earth Departure Stage, and Ares launch vehicles) will require a lunar navigation architecture for navigation state updates during lunar-class missions. Orion in particular has baselined earth-based ground direct tracking as the primary source for much of its absolute navigation needs. However, due to the uncertainty in the lunar navigation architecture, the Orion program has had to make certain assumptions on the capabilities of such architectures in order to adequately scale the vehicle design trade space. The following paper outlines lunar navigation requirements, the Orion program assumptions, and the impacts of these assumptions to the lunar navigation architecture design. The selection of potential sites was based upon geometric baselines, logistical feasibility, redundancy, and abort support capability. Simulated navigation covariances mapped to entry interface flightpath- angle uncertainties were used to evaluate knowledge errors. A minimum ground station architecture was identified consisting of Goldstone, Madrid, Canberra, Santiago, Hartebeeshoek, Dongora, Hawaii, Guam, and Ascension Island (or the geometric equivalent).

D'Souza, Christopher↗
NASA NTRSDate not supplied

Cumulative Noise Metric Design Considerations for the Nasa Quesst Community Test Campaign With the X-59 Aircraft

The National Aeronautics and Space Administration (NASA) plans to collect X-59 aircraft dose-response data to inform international regulators in their efforts to establish acceptable noise standards to replace the current ban on overland supersonic commercial flight. For this upcoming community test campaign, the sound level from a supersonic overflight of the X-59 constitutes a single-event dose, and an end-of-day survey after multiple flight events constitutes a cumulative response. This study considers how X-59 community tests could be designed to explore the relationship between multiple single events and cumulative annoyance response. Presently, a day-night level summation of single-event doses formulates the cumulative dose; however, a generalization method may improve the understanding of the linkage between multiple single events and cumulative response. This work utilizes an analysis method that employs a parameter to vary the cumulative dose metric such that it can represent the loudest single event, remain as the day-night level summation, or be more responsive to the number of events. The analysis is demonstrated on simulated dose-response datasets derived from previous NASA field studies and from expectations of X-59 community tests. Results demonstrate that certain dose designs are more efficient than others in determining the analysis parameter.

dose-response modeling↗
NASA NTRSDate not supplied

Cumulative Noise Metric Design Considerations for the NASA Quesst Community Test Campaign With the X-59 Aircraft

The National Aeronautics and Space Administration (NASA) plans to collect X-59 aircraft dose-response data to inform international regulators in their efforts to establish acceptable noise standards to replace the current ban on overland supersonic commercial flight. For this upcoming community test campaign, the sound level from a supersonic overflight of the X-59 constitutes a single-event dose, and an end-of-day survey after multiple flight events constitutes a cumulative response. This study considers how X-59 community tests could be designed to explore the relationship between multiple single events and cumulative annoyance response. Presently, a day-night level summation of single-event doses formulates the cumulative dose; however, a generalization method may improve the understanding of the linkage between multiple single events and cumulative response. This work utilizes an analysis method that employs a parameter to vary the cumulative dose metric such that it can represent the loudest single event, remain as the day-night level summation, or be more responsive to the number of events. The analysis is demonstrated on simulated dose-response datasets derived from previous NASA field studies and from expectations of X-59 community tests. Results demonstrate that certain dose designs are more efficient than others in determining the analysis parameter.

dose-response modeling↗
NASA NTRS1987

High temperature electrolyzer/fuel cell power cycle: Preliminary design considerations

A model of a high temperature electrolyzer/fuel cell, hydrogen/oxygen, thermally regenerative power cycle is developed and used to simulate system performance for varying system parameters. Initial estimates of system efficiency, weight, and volume are provided for a one KWe module assuming specific electrolyzer and fuel cell characteristics, both current and future. Specific interest is placed on examining the system responses to changes in device voltage versus current density operating curves, and the associated optimum operating ranges. The performance of a solar-powered, space based system in low earth orbit is examined in terms of the light-dark periods requiring storage. The storage design tradeoffs between thermal energy, electrical energy, and hydrogen/oxygen mass storage are examined. The current technology module is based on the 1000 C solid oxide electrolyzer cell and the alkaline fuel cell. The Future Technology system examines benefits involved with developing a 1800K electrolyzer operating with an advanced fuel cell.

Morehouse, Jeffrey H.↗
NASA NTRS1988

Fire safety design considerations for advanced space vehicles

The desire to understand and explore space has driven man to overcome the confines of the Earth's atmosphere and accept the challenge of spaceflight. With our increasing ability to travel, work, and explore in space comes a need for a better understanding of the hazards in this relatively new endeavor. One of the most important and immediate needs is to be able to predict the ignition, spread, and growth of fire on board spacecraft. Fire safety aboard spacecraft has always been a concern; however, with the increasing number and duration of proposed missions, it is imperative that the spacecraft be designed with a solid understanding of fire hazards, insuring that all risks have been minimized and extinguishment systems are available.

Source record↗
NASA NTRS1983

A mercuric iodide detector system for X-ray astronomy. I - Design considerations and predictions of background and sensitivity

Since the discovery of Sco X-1 initiated X-ray astronomy in 1962, this science has progressed in connection with the placement of X-ray photon detectors above the atmosphere by means of rockets, balloons, and satellites. In the last few years, studies have been conducted regarding the use of mercuric iodide (HgI2) as room temperature X-ray detector for applications in hard X-ray astronomy. These detectors combine a high quantum efficiency with good energy resolution. The sensitivity of an astronomical X-ray telescope is discussed, and a description is presented of a specific design accepted for the HDXT to be flown on Spacelab. Attention is given to predictions of the background counting rate of the detector assembly in this design, taking into account the results of a Monte Carlo simulation of the detector assembly in the radiation environment at balloon altitudes (40 km).

Ricker, G. R.↗
NASA NTRS1976

System design consideration for the Nimbus-G observatory mission

The objectives of the Nimbus-G mission are to study air pollution, ocean parameters, and weather and climate on a global scale. The observations required to meet these objectives include nadir viewing and scanning, and limb viewing and scaling techniques. Each of these approaches requires that the spacecraft provide a sensor mounting surface that maintains a fixed orientation relative to the nadir and the orbit track and that the orientation of the orbit plane remain constant with respect to the sun for maximum space cooler efficiency. The tradeoffs necessary to satisfy the conflicting instrument payload requirements within the constraints placed on the Nimbus design are discussed, along with the modifications necessary to meet the unique needs of the instrument complement.

Hogan, G. D.↗
NASA NTRS1971

Digital autopilots: Design considerations and simulator evaluations

The development of a digital autopilot program for a transport aircraft and the evaluation of that system's performance on a transport aircraft simulator is discussed. The digital autopilot includes three axis attitude stabilization, automatic throttle control and flight path guidance functions with emphasis on the mode progression from descent into the terminal area through automatic landing. The study effort involved a sequence of tasks starting with the definition of detailed system block diagrams of control laws followed by a flow charting and programming phase and concluding with performance verification using the transport aircraft simulation. The autopilot control laws were programmed in FORTRAN 4 in order to isolate the design process from requirements peculiar to an individual computer.

Osder, S.↗
NASA NTRS1994

Orbital management and design considerations for NiCd satellite power systems

Several recently manufactured 50 and 60 ampere hour aerospace NiCd battery cell lots, produced by Gates Aerospace Batteries, are prone to premature on orbit performance degradation. The failure mechanism is cadmium migration, and the consequent development of soft shorts. A Martin Marietta Astronautics satellite program instituted an orbital management strategy for a set of these batteries that reduced the rate of degradation and brought the system to stable operation. This strategy involves: (1) minimizing the accumulated battery overcharge; (2) regular discharge exercises; and (3) periodic battery reconditioning. Because of changes in the NiCd cell manufacturing process, the actual performance of subsequent lots of NiCd cells is open to question. Future NiCd based power system designs should therefore allow for fine control of charge parameters, and an on orbit battery reconditioning capability. To minimize risk, it is much better to perform a full life test to qualify the cells before launch, rather than in parallel with orbital operations. If there are any changes in the manufacturing process of cells, it is extremely important to maintain very strong cognizance of secondary subcontractors, recognizing that the cell and battery manufacturing discipline is easily atrophied.

Tausch, Benjamin J., II↗
NASA NTRS1994

Size effect in composite materials and structures: Basic concepts and design considerations

Composite materials display strength characteristics that are similar to those of brittle ceramics, whose strengths are known to decrease with increasing volume for a uniform state of stress (size effect) and also are dependent on stress distribution. These similarities raise the question of whether there is also a size effect in composite materials and structures. There is significant, but inconclusive experimental evidence for the existence of a size effect in composites. Macroscopic and micromechanical statistical models have been developed which predict a size effect and are in general agreement with experimental data. The existence of a significant size effect in composites would be of great importance. For example, it would mean that use of standard test coupons to establish design allowables for large structures could be very nonconservative. Further, it would be necessary to analyze the strength of large composite structures using statistical methods, as is done for ceramics.

Zweben, Carl↗