SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Dynamic Isotope Power System (DIPS) alternatives for the surface mission elements associated with a lunar base and subsequent manned Mars expedition were investigated, emphasizing the issue of how the mission environment affects system design. It was found that radiation shielding for human-rated applications has a greater impact on DIPS than any other factor.
A selection of lunar return trajectories is examined and assessed in terms of payload mass, vehicle mass, mission time, mission complexity, and total delta-V using a range of assumptions for the mission design based on historical precedence and near-future vehicle availability. Direct surface return trajectories using a single burn solution are compared with a range of Near-Rectilinear Halo Orbit return and Ballistic Return Trajectories. This study weighs anticipated mission needs, requirements and constraints with the aim of assessing the feasibility of commercial lunar cargo and/or sample return options utilizing NASA’s Gateway and Deep Space Logistics project.
The current status of the laminar-flow control LFC technology is summarized. Factors that have previously inhibited the application of LFC are first reviewed. Involved are the effects of atmospheric ice crystals, surface irregularities, acoustical environment, and off-design operating conditions. Aircraft design trends that are different from turbulent aircraft are discussed as are various design requirements unique to the LFC systems. Current design approaches for the principal LFC systems are reviewed. These include the system for protection of the leading-edge region from surface contamination and icing and the system for removal of a portion of the boundary-layer air. The latter includes consideration of both multiple spanwise suction slots and distributed perforations and required differences between the wing-box and leading-edge box regions.
Modern composite manufacturing methods have provided the opportunity for smooth surfaces that can sustain large regions of natural laminar flow (NLF) boundary layer behavior and have stimulated interest in developing advanced NLF airfoils and improved aircraft designs. Some of the preliminary results obtained in exploratory research investigations on advanced aircraft configurations at the NASA Langley Research Center are discussed. Results of the initial studies have shown that the aerodynamic effects of configuration variables such as canard/wing arrangements, airfoils, and pusher-type and tractor-type propeller installations can be particularly significant at high angles of attack. Flow field interactions between aircraft components were shown to produce undesirable aerodynamic effects on a wing behind a heavily loaded canard, and the use of properly designed wing leading-edge modifications, such as a leading-edge droop, offset the undesirable aerodynamic effects by delaying wing stall and providing increased stall/spin resistance with minimum degradation of laminar flow behavior.
All of the structures considered for the Control of Flexible Structures (COFS) flight experiments are deployable truss structures and their response will be dominated by the structural response of the joints. To prepare for these experiments some fundamental research work is being conducted in the Structures and Dynamics Division at LaRC which will provide insight into structurally efficient and predictable deployable truss joints. This work involves generic studies of the static and dynamic response of joints as well as the development of analytical models which can be used to predict the response of a large multijointed truss. In addition to the generic joint studies, the research effort encompasses the design and fabrication of a 20-meter long deployable truss beam for laboratory evaluation of its structural characteristics and correlation with developed prediction methods. The experimental results have indicated the importance of attention to detail in the design and fabrication of joints for deployable truss structures. The dimensional relations and material considerations for efficient pin-clevis joints have been outlined. Results of tests on the near-center latch are discussed.
Data and analyses related to a variety of algorithms for solving typical large-scale scheduling and resource allocation problems are presented. The capabilities and deficiencies of various alternative problem solving strategies are discussed from the viewpoint of computer system design.
"Touch-and-Go," or TAG, is an approach to small-body surface interrogation missions in which the spacecraft descends to the surface, remains in contact for a short time, and then ascends without coming to rest. Appropriate trajectory design solutions to support TAG missions vary widely based on the spacecraft dynamics, small-body environment, spacecraft and ground systems capabilities, and mission objectives. This paper discusses various factors that are considered during the process of developing a TAG mission trajectory and presents a few case study examples to demonstrate how TAG trajectories may vary from mission to mission.
Many energy efficiency financing programs could achieve greater uptake and impact by more effectively recruiting participants. This report examines some of the primary factors that have contributed to high participant uptake among successful financing programs. We review best practices in partnerships (Chapter 2), direct marketing (Chapter 3), and program design (Chapter 4) that facilitate robust participation. This report is primarily designed for state and local governments that have established energy efficiency financing programs or are considering doing so and are seeking insight into how they can ramp up program participation. In disseminating lessons learned from well-established programs that have experienced success in their target markets, the objective is to help scale up the large number of energy efficiency financing programs that seek to replicate these successes. This report can inform states, local governments, and other entities that will establish or expand clean energy financing programs with funding made available under the Infrastructure Investment and Jobs Act and the Inflation Reduction Act.
With the end of the Space Shuttle era anticipated in this decade and the requirements for the Crew Exploration Vehicle (CEV) now being defined, an opportune window exists for incorporating 'lessons learned' from relevant aircraft and space flight experience into the early stages of designing the next generation of human spacecraft. This includes addressing not only the technological and overall mission challenges, but also taking into account the comprehensive effects that space flight has on the pilot, all of which must be balanced to ensure the safety of the crew. This manuscript presents a unique and timely overview of a multitude of competing, often unrelated, requirements and constraints governing spacecraft design that must be collectively considered in order to ensure the success of future space exploration missions.
An analysis of the sequential switching shunt regulator unit (SSU) proposed for the space station and space platform is presented. The solar array and shunt regulator system is analyzed for ripple, output impedance, and stability. The performances of proportional gain and proportional integrator (PI) controllers are compared. A design example is provided, and an EASY5 simulation is presented for the regulation of the bus voltage by the SSU. It is shown that the bus ripple may be limited by the equivalent series resistor, in which case it cannot be reduced by increasing the capacitance or switching frequency. The proportional controller is shown to offer a faster response than the PI controller, but has a load-current-dependent steady state error. This error can be removed by the PI controller, but the bus impedance has a low-frequency pole which slows the response.
High energy planetary missions such as comet rendezvous, Saturn orbiter and asteroid rendezvous require development of a Solar Electric Propulsion Stage (SEPS) for augmentation of the Shuttle-IUS. Performance and functional requirements placed on the SEPS are presented. These requirements will be used in evolution of the SEPS design, which must be highly interactive with both the spacecraft and the mission design. Previous design studies have identified critical SEPS technology areas and some specific design solutions which are also presented in the paper.
Retropropulsion, initiated at supersonic conditions, is the only presently viable approach to the descent and landing of human-scale payloads on Mars, providing both deceleration and control authority for precision landing. Atmospheric powered descent challenges traditional processes and dependencies in system design. Changes to a design by one discipline have a greater potential to affect overall vehicle performance than in the case of powered descent with no atmosphere. The interdependence is due to the sensitivity of propulsive-aerodynamic interference effects to small changes in configuration or operational environment. The fidelity of Mars exploration architectures has increased in recent years, and the conditions and designs with the lowest aerosciences uncertainties are no longer as flight-relevant. At this time, there is no human-rated vehicle relying on retropropulsion for descent and landing in an atmospheric environment. Continued development of powered descent for atmospheric environments is enabled by progressive balanced investments in ground testing, predictive computational capabilities, and flight testing and demonstration.
The thesis that pilot skill development in the Navy approach and landing task is very strongly tied to the aircraft closure rate and, therefore, that pilot training for this task should be based on an appropriate progression closure rate is considered. A rational and explicit determination of design point approach speeds as well as other important aerodynamic features for training aircraft is also considered. Two keys are discussed: recognition of the significance of transitioning from a purely compensatory control loop technique to one involving a pursuit crossfeed between throttle and pitch attitude, and addressing the terminal flight path adjustment in terms of range-to-go.
The upcoming NASA Lunar Terrain Vehicle (LTV) will succeed the Apollo Lunar Roving Vehicle, performing both surface exploration and logistics transfer in NASA’s return to the Moon. Human-in-the-Loop (HITL) testing will play a key role in refining the design of the LTV, ensuring its usability and ability to accommodate the astronaut population. A motion-based platform and a lunar terrain and lighting model can simulate the conditions of the lunar south pole region. It can be used by NASA to conduct HITL testing in concert with HITL testing of the drivable Ground Reference Unit (GTU) concept vehicle. The dynamic motion of the platform combined with the mobility restrictions of pressurized suits could help improve NASA understanding of vehicle-suit-astronaut interfaces. NASA human factors practitioners have proposed multiple HITL test series to use the motion-based platform in conjunction with testing of the GTU in hopes that lessons learned can be applied to help select a commercial partner to develop the Artemis LTV.
SpaceWire is becoming a preferred protocol for board to board communication over a backplane in addition to its existing use over cabled interfaces, replacing other protocols due to its simplicity and readily available flight quality physical layer devices, IP cores and test equipment. However, without specific guidelines for implementing SpaceWire over a backplane, designers are left to make trade decisions regarding connector selection, layout design rules and test accessibility issues. This paper will discuss NASA's Goddard Space Flight Center s implementation of high speed SpaceWire over backplane on James Webb Space Telescope and other missions.
The development and ground test of a rocket-based combined cycle (RBCC) propulsion system is being conducted as part of the NASA Marshall Space Flight Center (MSFC) Integrated System Test of an Airbreathing Rocket (ISTAR) program. The eventual flight vehicle (X-43B) is designed to support an air-launched self-powered Mach 0.7 to 7.0 demonstration of an RBCC engine through all of its airbreathing propulsion modes - air augmented rocket (AAR), ramjet (RJ), and scramjet (SJ). Through the use of analytical tools, numerical simulations, and experimental tests the ISTAR program is developing and validating a hydrocarbon-fueled RBCC combustor design methodology. This methodology will then be used to design an integrated RBCC propulsion system that produces robust ignition and combustion stability characteristics while maximizing combustion efficiency and minimizing drag losses. First order analytical and numerical methods used to design hydrocarbon-fueled combustors are discussed with emphasis on the methods and determination of requirements necessary to establish engine operability and performance characteristics.
The development and ground test of a rocket-based combined cycle (RBCC) propulsion system is being conducted as part of the NASA Marshall Space Flight Center (MSFC) Integrated System Test of an Airbreathing Rocket (ISTAR) program. The eventual flight vehicle (X-43B) is designed to support an air-launched self-powered Mach 0.7 to 7.0 demonstration of an RBCC engine through all of its airbreathing propulsion modes - air augmented rocket (AAR), ramjet (RJ), and scramjet (SJ). Through the use of analytical tools, numerical simulations, and experimental tests the ISTAR program is developing and validating a hydrocarbon-fueled RBCC combustor design methodology. This methodology will then be used to design an integrated RBCC propulsion system thai: produces robust ignition and combustion stability characteristics while maximizing combustion efficiency and minimizing drag losses. First order analytical and numerical methods used to design hydrocarbon-fueled combustors are discussed with emphasis on the methods and determination of requirements necessary to establish engine operability and performance characteristics.
Bolometers operating at low temperatures (T greater than 0.3 K) are the best candidate for far infrared (lambda greater than or = 120 microns) and submillimeter detection from cold orbiting telescopes. The limits of sensitivity for such devices have been studied (Mather, 1983). Based on this work, we conclude that excellent sensitivity is possible given careful detector design. We have designed and are fabricating bolometers for operation at low temperatures. The crucial components in detector design are (1) heat capacity, (2) temperature sensing, and (3) absorption of infrared radiation. In this presentation, we discuss the choice of materials and fabrication techniques we have made in the interest of maximum sensitivity. In order that optimization of detector performance be reasonably easy to carry out, we have attempted to use conventional fabrication techniques wherever possible (photolithography, wire bonding). The use of such procedures allows us to make design changes on short time scales, which is essential in achieving optimal performance.