Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “dependability modeling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14
All sourcesNASA NTRSDOE OSTI
NASA NTRS1972

Diffusion model for the phase delay between thermospheric density and temperature.

Consideration of a two-dimensional time-dependent model in which the thermosphere dynamics is excited by the UV heat input within the thermosphere, showing that the wind-induced variations in the diurnal component of atomic oxygen dominate over its temperature-induced variations up to 200 km. The assumption of diffusive equilibrium is therefore in general not valid for O within the lower thermosphere. The effect of the diurnal wind circulation is to redistribute O so that the diurnal variations in the forbidden O/forbidden N2 and forbidden O/forbidden O2 ratios are damped by about 20%, thus contributing to the maintenance of the nighttime F2 region, and the maximum in the diurnal variation of O is shifted by one to two hours away from the temperature maximum toward noon, thus contributing significantly to the temperature-density time lag at thermospheric heights above 200 km, where O becomes the major constituent.

Mayr, H. G.↗
DOE OSTI2022

Austenitic parent grain reconstruction in martensitic steel using deep learning

In this work we develop a deep convolutional architecture to estimate the prior austenite structure from observed martensite electron backscatter diffraction micrographs. A novel data augmentation strategy randomizes the global reference coordinate system which makes it possible to train our model from only four micrographs. The model is much faster than algorithmic approaches and generalizes well when applied to micrographs of a different material. Empirical evidence suggests the efficacy of the model depends on the scale of the microstructure and receptive field of the vision model. Furthermore, this work demonstrates that modern computer vision approaches are well suited for capturing complex spatial-orientation patterns present in orientation imaging micrographs.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Estimation of biquadratic and bicubic Heisenberg effective couplings from multiorbital Hubbard models

Abstract We studied a multi-orbital Hubbard model at half-filling for two and three orbitals per site on a two-site cluster via full exact diagonalization, in a wide range for the onsite repulsion U , from weak to strong coupling, and multiple ratios of the Hund coupling J H to U . The hopping matrix elements among the orbitals were also varied extensively. At intermediate and large U , we mapped the results into a Heisenberg model. For two orbitals per site, the mapping is into a S = 1 Heisenberg model where by symmetry both nearest-neighbor ( S i ⋅ S j ) and ( S i ⋅ S j ) 2 are allowed, with respective couplings J 1 and J 2 . For the case of three orbitals per site, the mapping is into a S = 3/2 Heisenberg model with ( S i ⋅ S j ), ( S i ⋅ S j ) 2 , and ( S i ⋅ S j ) 3 terms, and respective couplings J 1 , J 2 , and J 3 . The strength of these coupling constants in the Heisenberg models depend on the U , J H , and hopping amplitudes of the underlying Hubbard model. Our study provides a first crude estimate to establish bounds on how large the ratios J 2 / J 1 and J 3 / J 1 can be. We show that those ratios appear rather limited and, as a qualitative guidance, we conclude that J 2 / J 1 is less than 0.4 and J 3 / J 1 is less than 0.2, establishing bounds on effective models for strongly correlated Hubbard systems. Moreover, the intermediate Hubbard U regime was found to be the most promising to enhance J 2 / J 1 and J 3 / J 1 .

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2025

Modeling of the high column density systems in the Lyman-Alpha forest

The Lyman-α forests observed in the spectra of high-redshift quasars can be used as a tracer of the cosmological matter density to study baryon acoustic oscillations (BAO) and the Alcock-Paczynski effect. Extraction of cosmological information from these studies requires modeling of the forest correlations. While the models depend most importantly on the bias parameters of the intergalactic medium (IGM), they also depend on the numbers and characteristics of high-column-density systems (HCDs) ranging from Lyman-limit systems with column densities log N HI /1cm -2 > 17 to damped Lyman-α systems (DLAs) with log N HI /1cm -2 > 20.2. These HCDs introduce broad damped absorption characteristic of a Voigt profile. Consequently they imprint a component on the power spectrum whose modes in the radial direction are suppressed, leading to a scale-dependent bias. Using mock data sets of known HCD content, we test a model that describes this effect in terms of the distribution of column densities of HCDs, the Fourier transforms of their Voigt profiles and the bias of the halos containing the HCDs. Our results show that this physically well-motivated model describes the effects of HCDs with an accuracy comparable to that of the ad-hoc models used in published forest analyses. We also discuss the problems of applying the model to real data, where the HCD content and their bias is uncertain.

Lyman alpha forest↗
DOE OSTI2024

Training custom light curve models of SN Ia subpopulations selected according to host galaxy properties

ABSTRACT Type Ia supernova (SN Ia) cosmology analyses include a luminosity step function in their distance standardization process to account for an observed yet unexplained difference in the post-standardization luminosities of SNe Ia originating from different host galaxy populations [e.g. high-mass ($M \gtrsim 10^{10} \, {\rm M}_{\odot }$) versus low-mass galaxies]. We present a novel method for including host-mass correlations in the SALT3 (Spectral Adaptive Light curve Template 3) light curve model used for standardizing SN Ia distances. We split the SALT3 training sample according to host-mass, training independent models for the low- and high-host-mass samples. Our models indicate that there are different average Si ii spectral feature strengths between the two populations, and that the average spectral energy distribution of SNe from low-mass galaxies is bluer than the high-mass counterpart. We then use our trained models to perform an SN cosmology analysis on the 3-yr spectroscopically confirmed Dark Energy Survey SN sample, treating SNe from low- and high-mass host galaxies as separate populations throughout. We find that our mass-split models reduce the Hubble residual scatter in the sample, albeit at a low statistical significance. We do find a reduction in the mass-correlated luminosity step but conclude that this arises from the model-dependent re-definition of the fiducial SN absolute magnitude rather than the models themselves. Our results stress the importance of adopting a standard definition of the SN parameters (x0, x1, c) in order to extract the most value out of the light curve modelling tools that are currently available and to correctly interpret results that are fit with different models.

Taylor, G. (ORCID:0000000157563259)↗
DOE OSTI2024

Search for a scalar or pseudoscalar dilepton resonance produced in association with a massive vector boson or top quark-antiquark pair in multilepton events at s = 13 TeV

A search for beyond the standard model spin-0 bosons, ϕ , that decay into pairs of electrons, muons, or tau leptons is presented. The search targets the associated production of such bosons with a W or Z gauge boson, or a top quark-antiquark pair, and uses events with three or four charged leptons, including hadronically decaying tau leptons. The proton-proton collision data set used in the analysis was collected at the LHC from 2016 to 2018 at a center-of-mass energy of 13 TeV, and corresponds to an integrated luminosity of 138 fb - 1 . The observations are consistent with the predictions from standard model processes. Upper limits are placed on the product of cross sections and branching fractions of such new particles over the mass range of 15 to 350 GeV with scalar, pseudoscalar, or Higgs-boson-like couplings, as well as on the product of coupling parameters and branching fractions. Several model-dependent exclusion limits are also presented. For a Higgs-boson-like ϕ model, limits are set on the mixing angle of the Higgs boson with the ϕ boson. For the associated production of a ϕ boson with a top quark-antiquark pair, limits are set on the coupling to top quarks. Finally, limits are set for the first time on a fermiophilic dilaton-like model with scalar couplings and a fermiophilic axion-like model with pseudoscalar couplings.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2025

Machine learning assisted unfolding for neutrino cross-section measurements with the OmniFold technique

The choice of unfolding method for a cross-section measurement is tightly coupled to the model dependence of the efficiency correction and the overall impact of cross-section modeling uncertainties in the analysis. A key issue is the dimensionality used in unfolding, as the kinematics of all outgoing particles in an event typically affect the reconstruction performance in a neutrino detector. OmniFold is an unfolding method that iteratively reweights a simulated dataset, using machine learning to utilize arbitrarily high-dimensional information, that has previously been applied to proton-proton and proton-electron datasets. This paper demonstrates OmniFold’s application to a neutrino cross-section measurement for the first time using a public T2K near detector simulated dataset, comparing its performance with traditional approaches using a mock data study.

Machine learning↗
NASA NTRS1988

Solutal convection during directional solidification

During directional solidification of a binary alloy at constant velocity, buoyancy-driven fluid flow may occur due to the solute gradients generated by the solidification process. Numerical calculations of the solute and fluid flow fields in the melt have been carried out using finite differences in a two-dimensional, time-dependent model that assumes a planar crystal-melt interface and allows time-dependent gravitational accelerations. The container walls are rigid and perfectly insulating for solute. For constant vertical gravitational accelerations, as the solutal Rayleigh number is varied, multiple steady states and time-dependent states may occur. The bifurcation from the quiescent state may be subcritical or transcritical, depending on the aspect ratio of the container. Calculations have also been performed for a gravitational acceleration that is assumed to be uniform in magnitude with its direction rotating uniformly. Numerical results have been obtained for a Schmidt number of 10 and a gravitational acceleration of 0.0001 G. The maximum variation in the solute concentration at the crystal-melt interface is calculated for various values of the rotation rate of the gravitational acceleration.

Mcfadden, G. B.↗
NASA NTRS1989

Comparison of laser models

Progress on the comparison of laser models is reported. Equations for an oscillatory model and a nonoscillatory model for the simulation of iodine laser operation are solved. Reaction rate coefficients used in both models are listed. Currently there are four models for the simulation of iodine laser operation are solved. Reaction rate coefficients used in both models are listed. Currently there are four models for the simulation of an iodine laser. They are: (1) a time dependent model; (2) a quasi-steady state model; (3) a noncompressible model; and (4) a compressible flow laser model. Current research is being directed toward: (1) parameter studies using the compressible flow laser model; (2) development of a two-pass amplifier model; and (3) solving a system of equations describing operation of the high powered iodine MOPA (master oscillator power amplifier).

Heinbockel, John H.↗
NASA NTRS1992

Approaches to ionospheric modelling, simulation and prediction

The ionosphere is a complex, multispecies, anisotropic medium that exhibits a significant variation with time, space, season, solar cycle, and geomagnetic activity. In recent years, a wide range of models have been developed in an effort to describe ionospheric behavior. The modeling efforts include: (1) empirical models based on extensive worldwide data sets; (2) simple analytical models for a restricted number of ionospheric parameters; (3) comprehensive, 3D, time-dependent models that require supercomputers; (4) spherical harmonic models based on fits to output obtained from comprehensive numerical models; and (5) ionospheric models driven by real-time magnetospheric inputs. In an effort to achieve simplicity, some of the models have been restricted to certain altitude or latitude domains, while others have been restricted to certain ionospheric parameters, such as the F-region peak density, the auroral conductivity, and the plasma temperatures. The current status of the modeling efforts is reviewed.

Schunk, R. W.↗
NASA NTRS2004

"Hot Spots" of Land Atmosphere Coupling

Previous estimates of land-atmosphere interaction (the impact of soil moisture on precipitation) have been limited by a severe paucity of relevant observational data and by the model-dependence of the various computational estimates. To counter this limitation, a dozen climate modeling groups have recently performed the same highly-controlled numerical experiment as part of a coordinated intercomparison project. This allows, for the first time ever, a superior multi-model approach to the estimation of the regions on the globe where precipitation is affected by soil moisture anomalies during Northern Hemisphere summer. Such estimation has many potential benefits; it can contribute, for example, to seasonal rainfall prediction efforts.

Koster, Randal D.↗
NASA NTRS2012

PSR J0007+7303 in the CTA1I Supenova Remnant: New Gamma-Ray Results from Two Years of Fermi Large Area Telescope Observations

One of the main results of the Fermi Gamma-Ray Space Telescope is the discovery of -ray selected pulsars. The high magnetic field pulsar, PSR J0007+7303 in CTA1, was the first ever to be discovered through its -ray pulsations. Based on analysis of two years of Large Area Telescope (LAT) survey data, we report on the discovery of -ray emission in the off-pulse phase interval at the 6 level. The emission appears to be extended at the 2 level with a disk of extension 0.6. level. The flux from this emission in the energy range E 100 MeV is F 100 = (1.73 0.40stat 0.18sys) 108photonscm2 s1 and is best fitted by a power law with a photon index of = 2.54 0.14stat 0.05sys. The pulsed -ray flux in the same energy range is F 100 = (3.95 0.07stat 0.30sys) 107photonscm2 s1 and is best fitted by an exponentially cutoff power-law spectrum with a photon index of = 1.41 0.23stat 0.03sys and a cutoff energy Ec = 4.04 0.20stat 0.67sysGeV. We find no flux variability either at the 2009 May glitch or in the long-term behavior. We model the -ray light curve with two high-altitude emission models, the outer gap and slot gap, and find that the preferred model depends strongly on the assumed origin of the off-pulse emission. Both models favor a large angle between the magnetic axis and observer line of sight, consistent with the nondetection of radio emission being a geometrical effect. Finally, we discuss how the LAT results bear on the understanding of the cooling of this neutron star.

Abdo, A.↗
NASA NTRS1980

Equivalent source modeling of the main field using MAGSAT data

The software was considerably enhanced to accommodate a more comprehensive examination of data available for field modeling using the equivalent sources method by (1) implementing a dynamic core allocation capability into the software system for the automatic dimensioning of the normal matrix; (2) implementing a time dependent model for the dipoles; (3) incorporating the capability to input specialized data formats in a fashion similar to models in spherical harmonics; and (4) implementing the optional ability to simultaneously estimate observatory anomaly biases where annual means data is utilized. The time dependence capability was demonstrated by estimating a component model of 21 deg resolution using the 14 day MAGSAT data set of Goddard's MGST (12/80). The equivalent source model reproduced both the constant and the secular variation found in MGST (12/80).

Source record↗
NASA NTRS1994

Modeling the bidirectional reflectance distribution function of mixed finite plant canopies and soil

An analytical model of the bidirectional reflectance for optically semi-infinite plant canopies has been extended to describe the reflectance of finite depth canopies contributions from the underlying soil. The model depends on 10 independent parameters describing vegetation and soil optical and structural properties. The model is inverted with a nonlinear minimization routine using directional reflectance data for lawn (leaf area index (LAI) is equal to 9.9), soybeans (LAI, 2.9) and simulated reflectance data (LAI, 1.0) from a numerical bidirectional reflectance distribution function (BRDF) model (Myneni et al., 1988). While the ten-parameter model results in relatively low rms differences for the BRDF, most of the retrieved parameters exhibit poor stability. The most stable parameter was the single-scattering albedo of the vegetation. Canopy albedo could be derived with an accuracy of less than 5% relative error in the visible and less than 1% in the near-infrared. Sensitivity were performed to determine which of the 10 parameters were most important and to assess the effects of Gaussian noise on the parameter retrievals. Out of the 10 parameters, three were identified which described most of the BRDF variability. At low LAI values the most influential parameters were the single-scattering albedos (both soil and vegetation) and LAI, while at higher LAI values (greater than 2.5) these shifted to the two scattering phase function parameters for vegetation and the single-scattering albedo of the vegetation. The three-parameter model, formed by fixing the seven least significant parameters, gave higher rms values but was less sensitive to noise in the BRDF than the full ten-parameter model. A full hemispherical reflectance data set for lawn was then interpolated to yield BRDF values corresponding to advanced very high resolution radiometer (AVHRR) scan geometries collected over a period of nine days. The resulting parameters and BRDFs are similar to those for the full sampling geometry, suggesting that the limited geometry of AVHRR measurements might be used to reliably retrieve BRDF and canopy albedo with this model.

Schluessel, G.↗
NASA NTRS2012

Solar Thermal Upper Stage Liquid Hydrogen Pressure Control Testing and Analytical Modeling

The demonstration of a unique liquid hydrogen (LH2) storage and feed system concept for solar thermal upper stage was cooperatively accomplished by a Boeing/NASA Marshall Space Flight Center team. The strategy was to balance thermodynamic venting with the engine thrusting timeline during a representative 30-day mission, thereby, assuring no vent losses. Using a 2 cubic m (71 cubic ft) LH2 tank, proof-of-concept testing consisted of an engineering checkout followed by a 30-day mission simulation. The data were used to anchor a combination of standard analyses and computational fluid dynamics (CFD) modeling. Dependence on orbital testing has been incrementally reduced as CFD codes, combined with standard modeling, continue to be challenged with test data such as this.

Olsen, A. D.↗
NASA NTRS1992

The chlorine budget of the present-day atmosphere - A modeling study

The contribution of source gases to the total amount of inorganic chlorine (ClY) is examined analytically with a time-dependent model employing 11 source gases. The source-gas emission data are described, and the modeling methodology is set forth with attention given to the data interpretation. The abundances and distributions are obtained for all 11 source gases with corresponding ClY production rates and mixing ratios. It is shown that the ClY production rate and the ClY mixing ratio for each source gas are spatially dependent, and the change in the relative contributions from 1950 to 1990 is given. Ozone changes in the past decade are characterized by losses in the polar and midlatitude lower stratosphere. The values for CFC-11, CCl4, and CH3CCl3 suggest that they are more evident in the lower stratosphere than is suggested by steady-state estimates based on surface concentrations.

Weisenstein, Debra K.↗