Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “density modification”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

From Fundamental Interfacial Reaction Kinetics to Macroscopic Current–Voltage Characteristics: Case Study of Solid Acid Fuel Cell Limitations and Possibilities

The unique properties of solid acid electrolytes, in particular CsH 2 PO 4 , are in many ways ideal for fuel cell operation. However, the technology is constrained by high cathode overpotentials. Here a simplified cathode geometry is employed to obtain the fundamental electrochemical parameters (exchange current density and charge transfer coefficient) describing the oxygen reduction reaction (ORR) at the CsH 2 PO 4 -Pt-gas interface. The parameters are incorporated into a 1D model of the voltage–current characteristics of realistic SAFC cathodes, which reproduced the measured polarization behavior of such cathodes without recourse to fitting adjustable parameters. Following this validation, the model is utilized to evaluate the impact of changes to cathode properties, microstructure, and operating conditions. Of these, the charge transfer coefficient, measured to have a value of ≈0.6 for ORR on Pt in the SAFC cathode environment, is found to have the greatest impact on power output. Nevertheless, even without material modifications, a combination of microstructural and operational modifications are identified with projected performance metrics meeting Department of Energy targets (0.8 V at 300 mA cm –2 , and peak power density of 1 W cm –2 ), albeit at high Pt loadings. However, the analysis indicates that truly meaningful advances will likely necessitate the discovery of alternative ORR catalysts.

36 MATERIALS SCIENCE↗
NASA NTRS2007

Increasing the Life of a Xenon-Ion Spacecraft Thruster

A short document summarizes the redesign of a xenon-ion spacecraft thruster to increase its operational lifetime beyond a limit heretofore imposed by nonuniform ion-impact erosion of an accelerator electrode grid. A peak in the ion current density on the centerline of the thruster causes increased erosion in the center of the grid. The ion-current density in the NSTAR thruster that was the subject of this investigation was characterized by peak-to-average ratio of 2:1 and a peak-to-edge ratio of greater than 10:1. The redesign was directed toward distributing the same beam current more evenly over the entire grid andinvolved several modifications of the magnetic- field topography in the thruster to obtain more nearly uniform ionization. The net result of the redesign was to reduce the peak ion current density by nearly a factor of two, thereby halving the peak erosion rate and doubling the life of the thruster.

Goebel, Dan↗
DOE OSTI2025

Anion Vacancies Coupling with Heterostructures Enable Advanced Aerogel Cathode for Ultrafast Aqueous Zinc‐Ion Storage

As a potential cathode material, manganese-based sulfide has recently attracted increasing interest due to its many advantages in aqueous zinc-ion storage. Unfortunately, some challenges such as sluggish kinetics, unstable structure, and controversial phase transition mechanism during the energy storage process hinder its practical application. Herein, inspired by density functional theory (DFT) calculations, a novel 3D sulfur vacancy-rich and heterostructured MnS/MXene aerogel is designed, and used as a cathode for aqueous Zn-ion batteries/hybrid capacitors (ZIBs/ZICs) for the first time. Thanks to the synergistic modification strategy of sulfur vacancies and heterostructures, the as-constructed MnS/MXene//Zn ZIBs exhibit significantly enhanced electrochemical properties, especially outstanding rate capability and cyclic stability. More encouragingly, the as-assembled MnS/MXene//porous carbon (PC) ZICs exhibit an ultrahigh energy density, a high power density, and a splendid cycling lifespan. Most notably, systematic kinetic analyses, ex situ characterizations, and DFT calculations illustrate that MnS/MXene first irreversibly converts into MnO x @ZnMnO 3 /MXene, and then undergoes a reversible conversion from MnO x @ZnMnO 3 /MXene to MnOOH@ZnMn 2 O 4 /MXene, accompanied by the co-insertion/extraction of H + and Zn 2+ . Further, the synergistic modification strategy of sulfur vacancies and heterostructures and the thorough mechanistic study proposed in this work offer valuable guidance for designing and exploiting high-performance cathodes in aqueous zinc-based energy storage devices.

25 ENERGY STORAGE↗
DOE OSTI2024

Synthetic Control of Water-Stable Hybrid Perovskitoid Semiconductors

Hybrid metal-halide perovskites and their derived materials have emerged as the next-generation semiconductors with a wide range of applications, including photovoltaics, light-emitting devices, and other optoelectronics. Over the past decade, numerous single-crystalline perovskite derivatives have been synthesized and developed. However, the synthetic methods for these derivatives mainly rely on acidic crystallization conditions. This approach leads to crystals comprising metal halide building blocks, which show problematic stability when directly exposed to water. In this study, a methodology is developed for synthesizing hybrid metal-halide compounds using lead iodide and the zwitterionic bifunctional molecule cysteamine (CYS), to form various perovskitoid structures under a broad pH range. Interestingly, the different pH conditions alter the coordination environment of lead halides, leading to lead-sulfide and lead-nitride covalent bond formation. This modification significantly enhances their stability when in direct contact with water, lasting for months. Photoluminescence measurements and first principal density functional theory (DFT) calculations reveal that the perovskitoids synthesized under basic and acidic pH conditions exhibit a direct bandgap nature, while those synthesized under neutral conditions display an indirect bandgap. This approach opens new avenues for manipulating synthetic methods to develop water-stable hybrid semiconductors suitable for a wide range of applications, such as solid-state light emitters.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Molecular origin of viscoelasticity and influence of methylation in mesophase pitch

The viscoelastic and thermomechanical properties of pitches are responsible for their melt-spinning behavior, which is a critical step for manufacturing high-performance pitch-based carbon fibers. Here, we systematically explore the impact of methyl group modifications on the viscoelastic and thermal properties of mesophase pitches. We employ a range of atomistic modeling approaches, including Density Functional Theory (DFT), Density Functional Tight Binding (DFTB), and Classical Molecular Mechanics (MM), to provide detailed insights into the molecular interactions and structural changes. Further, our results revealed the molecular mechanisms that promote layered structures leading to the anisotropic nature of the viscoelastic behavior of mesophase pitch. Furthermore, we propose a modified molecular representation of naphthalene-based mesophase pitch based on the analysis of x-ray diffraction measurements. This study provides fundamental insights into the molecular structures of mesophase pitch and the role of methyl groups controlling its viscosity, which offer valuable insights into mesophase-based carbon fiber production.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Ferromagnetic Interlayer Exchange Coupling in a Few Layers of CrSBr on a Gold Thin Film

Abstract The two-dimensional character of van der Waals magnets allows for efficient control of their properties via proximity effects and electrical stimuli, making them promising candidates for application in spin electronics. We use spin-polarized low-energy electron microscopy to directly image the magnetic texture of thin CrSBr on top of a Au film, discovering a ferromagnetic ground state. We argue that the stabilization of the ferromagnetic ordering─as compared to the conventional antiferromagnetic one─is obtained via electron transfer from the Au film to the CrSBr flakes, in agreement with ab initio density functional theory calculations. Reflected-electron spectroscopy shows clear differences in the unoccupied density of states between a few layers of CrSBr on Au and bulk CrSBr, pointing toward electronic band structure modification in thin CrSBr. This work sheds light on the possibility of tuning the magnetic properties of two-dimensional magnets via substrate engineering.

Bosma, Rixt [University of Groningen , , ,]↗
DOE OSTI2020

The effect of Cu additions in FePt–BN–SiO 2 heat-assisted magnetic recording media

Structural and chemical order impact magnetic properties of solids, which are governed by spin–orbit coupling and exchange interaction. The ordered L1 0 phase of FePt is a key material to heat-assisted magnetic recording; to enable high storage density, a solid understanding is needed of structural and chemical disorder at small length scales, as well as associated modifications of the electronic band structure. Here, we investigate the effect of boron and copper additions (≲6 mol% Cu) on structural and magnetic properties of L1 0 FePt granular media. Two copper-driven mechanisms, although competing, can lead to improvements in both structural and magnetic properties. In particular, the Cu substitution on the Fe-site leads to a degradation of magnetic properties due to the delocalized electron orbitals originating from a larger Cu d -orbital occupancy. At the same time, Cu substitution leads to an enhanced crystallographic order and consequently magneto-crystalline anisotropy, which offsets the former effect to a large extent. Our study is based on magnetometry, x-ray absorption spectroscopy, ab-initio calculations and a phenomenological theory of disordered FePt granular media. We do not observe a sizable modification to Fe moments and electronic configuration; Cu reveals two different resonances associated with the presence and absence of Cu–B bonds that vary with total Cu concentration.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2021

New Laboratory and Astrophysical Probes of Physics Beyond the Standard Model (Final Technical Report)

The first of these directions centers on new ideas in dark matter detection. As experimental scrutiny narrows the window for new physics at the weak scale, it has become apparent that the solution to the dark matter mystery may not reside there. Theoretical developments such as the hidden sector/valley paradigm have, at the same time, shown that compelling theories of dark matter reside below the weak scale. Searching for dark matter at lower mass scales requires looking beyond the current paradigm of dark matter direct detection based on nuclear recoils. It is the goal of this project to provide new ideas to guide the experimental program looking for light dark matter. I am actively proposing ideas for detecting dark matter as light as a meV, well beyond the current focus of GeV-TeV scale dark matter. Some of the ideas I have proposed, such as superconducting, superfluid, and polar material targets, are actively being developed into experiments. My group will provide the relevant calculations to determine dark matter reach, providing crucial input to experiment on which targets should be developed. We will also provide an effective field theory framework to understand which types of experiments are most sensitive to each interaction type. The second of these directions is on probes of dark matter substructure as a mean to constrain, or observe, models of dark matter. The standard ΛCDM paradigm assumes that the dark matter density perturbations are adiabatic, scale invariant, and produced during inflation. However, many standard models of dark matter will produce modifications of this prediction, such as axion models with symmetry broken below the inflationary scale. Remarkably, we have limited direct measurements of the dark matter clumpiness at mass scales below dwarf galaxies. This allows for the possibility of observing modifications from vanilla ΛCDM due to particle dynamics. In many cases, simulations of dark matter structure in the presence of non-scale invariant fluctu- ations are understudied or completely lacking. I plan to develop both theoretical predictions for small scale structure in models with additional matter power on small scales, as well as observa- tional probes of small scale halos or clumps. One idea I have been recently focused on is pulsar timing, though my group will pursue a variety of lensing and astrometric probes. Lastly, the most risky direction involves spacetime fluctuations from quantum gravity. I showed that if one assumes that metric fluctuations in the Minkowski vacuum, at a surface separating a region in and out of causal contact (which we call a “horizon”), are determined by standard thermodynamic considerations at horizon, these metric fluctuations are large enough to observe in an interferometer with similar sensitivity to LIGO. In a follow-up paper we showed that these assumption holds for the vacuum in AdS/CFT. In future work, I plan to connect this work to recent soft graviton results, to frame this work in a concrete Randall-Sundrum model, and to work out concrete phenomenological predictions from the model. This work unquestionably takes a less trodden path, and works well as part of a well-rounded portfolio of less and more risky ideas. Particle physics is currently at a juncture which requires bold exploration of qualitatively new directions. This proposal outlines some of my plans over the coming years in these directions, leaving room also for surprises.

79 ASTRONOMY AND ASTROPHYSICS↗
NASA NTRSDate not supplied

Morphological evolution and transition at nanoscale in BSTO ceramic materials

Considerable efforts have been devoted for the development of low cost ferroelectric and clean energy storage multifunctional materials. Modification in design and production of a low cost material with well proven process provides pathway for high energy density dielectric energy storage. We studied fluorine doped a commercially well-established material system barium strontium titanate with two different concentrations of dopants and studied the morphological transition and its effect on properties. It was observed that sample with higher concentration transitioned much faster into glassy state, followed by growth of fibers which turned into a self-arranged bird nest type shape. The sample with lower concentration changed slowly into glassy state and only few fibers were farmed. Dielectric was highly dependent on processing methods and shows variation with crystallinity of material, temperature and cooling conditions during processing. In the higher concentration range, we observed nano-scale interface breakdown very similar to that of solid-liquid interface breakdown during crystal growth.

dielectric↗
DOE OSTI2020

Weighted greedy-optimal design of computer experiments for kernel-based and Gaussian process model emulation and calibration

This article is concerned with the approximation of high-dimensional functions by kernel-based methods. Motivated by uncertainty quantification, which often necessitates the construction of approximations that are accurate with respect to a probability density function of random variables, we aim at minimizing the approximation error with respect to a weighted $L^p$-norm. We present a greedy procedure for designing computer experiments based upon a weighted modification of the pivoted Cholesky factorization. The method successively generates nested samples with the goal of minimizing error in regions of high probability. Numerical experiments validate that this new importance sampling strategy is superior to other sampling approaches, especially when used with non-product probability density functions. We also show how to use the proposed algorithm to efficiently generate surrogates for inferring unknown model parameters from data.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2022

Manipulating the oxygen reduction reaction pathway on Pt-coordinated motifs

Electrochemical oxygen reduction could proceed via either 4e - -pathway toward maximum chemical-to-electric energy conversion or 2e - -pathway toward onsite H 2 O 2 production. Bulk Pt catalysts are known as the best monometallic materials catalyzing O 2 -to-H 2 O conversion, however, controversies on the reduction product selectivity are noted for atomic dispersed Pt catalysts. Here, we prepare a series of carbon supported Pt single atom catalyst with varied neighboring dopants and Pt site densities to investigate the local coordination environment effect on branching oxygen reduction pathway. Manipulation of 2e - or 4e - reduction pathways is demonstrated through modification of the Pt coordination environment from Pt-C to Pt-N-C and Pt-S-C, giving rise to a controlled H 2 O 2 selectivity from 23.3% to 81.4% and a turnover frequency ratio of H 2 O 2 /H 2 O from 0.30 to 2.67 at 0.4 V versus reversible hydrogen electrode. Energetic analysis suggests both 2e - and 4e - pathways share a common intermediate of *OOH, Pt-C motif favors its dissociative reduction while Pt-S and Pt-N motifs prefer its direct protonation into H 2 O 2 . By taking the Pt-N-C catalyst as a stereotype, we further demonstrate that the maximum H 2 O 2 selectivity can be manipulated from 70 to 20% with increasing Pt site density, providing hints for regulating the stepwise oxygen reduction in different application scenarios.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Enabling Stable High‐Voltage LiCoO 2 Operation by Using Synergetic Interfacial Modification Strategy

Abstract Structural and interfacial instability of the LiCoO 2 cathode under a voltage exceeding 4.5 V (vs Li/Li + ) severely hinders its practical applications for high‐energy‐density lithium batteries. Herein, a modified electrolyte with nitriles (suberonitrile or 1,3,6‐hexanetricarbonitrile) and fluoroethylene carbonate (FEC) coadditives is demonstrated to form an ultrathin and uniform interface layer on LiCoO 2 cathode under a synergetic effect. As such, LiCoO 2 /Li cells display excellent cyclability at a cutoff voltage of 4.6 V with a capacity retention over 72% after 300 cycles and 60% after 200 cycles at 30 and 55 °C, respectively, even achieving operation at a high current rate (10 C) upon 500 cycles as compared to the controls with fast‐falling capacity to zero. Furthermore, an adsorption‐coordination mechanism between nitriles and cobalt and synergetic effect of coadditives are explored by the alliance of spectroscopic analysis and theoretical calculations. The contributed lone‐pairs on the N 2p orbital of nitriles in coordination lowers the real oxidation state of Co 3+/4+ so that it decreases its catalysis on electrolytes, and the synergy from nitrile‐derived species regulates FEC to form an LiF‐containing electron‐insulated interface layer. This work shares a new insight to nitriles with the synergy of coadditives and paves a way to refine (ultra)high‐voltage LiCoO 2 cathode for high‐energy‐density energy storages.

Yang, Xuerui↗
NASA NTRS1994

The intact capture of hypervelocity dust particles using underdense foams

The impact of a hypervelocity projectile (greater than 3 km/s) is a process that subjects both the impactor and the impacted material to a large transient pressure distribution. The resultant stresses cause a large degree of fragmentation, melting, vaporization, and ionization (for normal densities). The pressure regime magnitude, however, is directly related to the density relationship between the projectile and target materials. As a consequence, a high-density impactor on a low-density target will experience the lowest level of damage. Historically, there have been three different approaches toward achieving the lowest possible target density. The first employs a projectile impinging on a foil or film of moderate density, but whose thickness is much less than the particle diameter. This results in the particle experiencing a pressure transient with both a short duration and a greatly reduced destructive effect. A succession of these films, spaced to allow nondestructive energy dissipation between impacts, will reduce the impactor's kinetic energy without allowing its internal energy to rise to the point where destruction of the projectile mass will occur. An added advantage to this method is that it yields the possibility of regions within the captured particle where a minimum of thermal modification has taken place. Polymer foams have been employed as the primary method of capturing particles with minimum degradation. The manufacture of extremely low bulk density materials is usually achieved by the introduction of voids into the material base. It must be noted, however, that a foam structure only has a true bulk density of the mixture at sizes much larger than the cell size, since for impact processes this is of paramount importance. The scale at which the bulk density must still be close to that of the mixture is approximately equal to the impactor. When this density criterion is met, shock pressures during impact are minimized, which in turn maximizes the probability of survival for the impacting particle. The primary objectives of the experiment are to (1) Examine the morphology of primary and secondary hypervelocity impact craters. Primary attention will be paid to craters caused by ejecta during hypervelocity impacts of different substrates. (2) Determine the size distribution of ejecta by means of witness plates and collect fragments of ejecta from craters by means of momentum-sensitive mcropore foam. (3) Assess the directionality of the flux by means of penetration-hole alignment of thin films placed above the cells. (4) Capture intact the particles that perforated the thin film and entered the cell. Capture media consisted of both previously flight-tested micropore foams and aerogel. The foams had different latent heats of fusion and, accordingly, will capture particles over a range of momenta. Aerogel was incorporated into the cells to determine the minimum diameter than can be captured intact.

Maag, Carl R.↗
DOE OSTI2023

Influence of the Graft Length on Nanocomposite Structure and Interfacial Dynamics

Both the dispersion state of nanoparticles (NPs) within polymer nanocomposites (PNCs) and the dynamical state of the polymer altered by the presence of the NP/polymer interfaces have a strong impact on the macroscopic properties of PNCs. In particular, mechanical properties are strongly affected by percolation of hard phases, which may be NP networks, dynamically modified polymer regions, or combinations of both. In this article, the impact on dispersion and dynamics of surface modification of the NPs by short monomethoxysilanes with eight carbons in the alkyl part (C 8 ) is studied. As a function of grafting density and particle content, polymer dynamics is followed by broadband dielectric spectroscopy and analyzed by an interfacial layer model, whereas the particle dispersion is investigated by small-angle X-ray scattering and analyzed by reverse Monte Carlo simulations. NP dispersions are found to be destabilized only at the highest grafting. The interfacial layer formalism allows the clear identification of the volume fraction of interfacial polymer, with its characteristic time. The strongest dynamical slow-down in the polymer is found for unmodified NPs, while grafting weakens this effect progressively. The combination of all three techniques enables a unique measurement of the true thickness of the interfacial layer, which is ca. 5 nm. Finally, the comparison between longer (C 18 ) and shorter (C 8 ) grafts provides unprecedented insight into the efficacy and tunability of surface modification. It is shown that C 8 -grafting allows for a more progressive tuning, which goes beyond a pure mass effect.

36 MATERIALS SCIENCE↗
NASA NTRS1992

Impact craters on Venus: An overview from Magellan observations

Magellan has revealed an ensemble of impact craters on Venus that is unique in many important ways. We have compiled a database describing 842 craters on 89 percent of the planet's surface mapped through orbit 2578 (the craters range in diameter from 1.5 to 280 km). We have studied the distribution, size-frequency, morphology, and geology of these craters both in aggregate and, for some craters, in more detail. We have found the following: (1) the spatial distribution of craters is highly uniform; (2) the size-density distribution of craters with diameters greater than or equal to 35 km is consistent with a 'production' population having a surprisingly young age of about 0.5 Ga (based on the estimated population of Venus-crossing asteroids); (3) the spectrum of crater modification differs greatly from that on other planets--62 percent of all craters are pristine, only 4 percent volcanically embayed, and the remainder affected by tectonism, but none are severely and progressively depleted based on size-density distribution extrapolated from larger craters; (4) large craters have a progression of morphologies generally similar to those on other planets, but small craters are typically irregular or multiple rather than bowl shaped; (5) diffuse radar-bright or -dark features surround some craters, and about 370 similar diffuse 'splotches' with no central crater are observed whose size-density distribution is similar to that of small craters; and (6) other features unique to Venus include radar-bright or -dark parabolic arcs opening westward and extensive outflows originating in crater ejecta.

Schaber, G. G.↗
DOE OSTI2023

Parameter dependencies of the separatrix density in low triangularity L-mode and H-mode JET-ILW plasmas

Abstract The midplane electron separatrix density, n e,sep , in JET-ILW L-mode and H-mode low triangularity deuterium fuelled plasmas exhibits a strong explicit dependence on the averaged outer divertor target electron temperature, n e,sep ∼ T e,ot −1/2 . This dependence is reproduced by analytic reversed two point model (rev-2PM), and arises from parallel pressure balance, as well as the ratio of the power and momentum volumetric loss factors, (1 − f cooling )/(1 − f mom-loss ). Quantifying the influence of the (1 − f cooling ) and (1 − f mom-loss ) loss factors on n e,sep has been enabled by measurement estimates of these quantities from L-mode density (fueling) ramps in the outer horizontal, VH(C), and vertical target, VV, divertor configurations. Rev-2PM n e,sep estimates from the extended H-mode and more limited L-mode datasets are recovered to within ±25% of the measurements, with a scaling factor applied to account for use of T e,ot , an averaged quantity, rather than flux tube resolved target values. Both the (1 − f cooling ) and (1 − f mom-loss ) trends and recovery of n e,sep using the rev-2PM formatting are reproduced in EDGE2D-EIRENE L-mode-like and H-mode-like density scan simulations. The general lack of a divertor configuration effect in the JET-ILW n e,sep trends can be attributed to a significant influence of main chamber recycling, which has been shown in the EDGE2D-EIRENE results to moderate n e,sep with respect to changes in divertor neutral leakage imposed by changes in the divertor configuration. The unified n e,sep vs T e,ot trends can, however, be broken if large modifications to the divertor geometry (e.g. complete removal of the outer divertor baffle structure) are introduced in the model. The more pronounced high-field side high density region formation in the VH(C) configuration with reduced clearance to the separatrix does not appear to have a significant influence on the outer midplane separatrix and pedestal parameters when mapped to T e,ot , although conditions at the inner midplane could not be assessed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2026

Electron beam irradiation effects on bulk metals: a comparative study of polycrystalline versus single-crystalline structures

This study investigates the effects of electron beam (e-beam) irradiation on the mechanical and structural properties of eight bulk metallic samples, comprising both polycrystalline (PC) and single-crystalline (SC) forms of Ni, Cr, V, and Ti. These metals were evaluated as potential candidates for beam exit windows in high-power (MW-class) particle accelerators. The primary objective is to identify metals capable of withstanding the conditions of high-power/MW-class e-beam accelerators and serve effectively as exit windows. Selection criteria were based on each metal’s intrinsic properties, power dissipation capability, and irradiation-induced changes in mechanical behavior, including hardness, elastic modulus, and defect density. Comprehensive characterization was conducted using field-emission scanning electron microscopy (FESEM), atomic force microscopy (AFM), scanning electron microscopy with energy-dispersive X-ray spectroscopy (SEM–EDS), X-ray diffraction (XRD), high-resolution transmission electron microscopy (HRTEM), selected area electron diffraction (SAED), and nanoindentation, performed both before and after exposure to a ~¿66 kGy dose from a 10 MeV e-beam accelerator. Results revealed that e-beam irradiation induced hardening in PC Ni, whereas PC Ti, commonly used in beam exit windows, exhibited softening. The observed softening in PC Ti is attributed to grain coarsening, elongation, and the formation of twins and twin boundaries, in contrast to the smaller, compressed grains in the pristine (Pr) PC Ti samples, consistent with the Hall–Petch relationship. The stresses due to twinning are small and insignificant in influencing the overall hardening of the PC Ti irradiated sample when compared to the stresses due to the dislocation density. Conversely, SC Ti samples exhibited irradiation-induced hardening. The SC Ti irradiated samples developed additional irradiation-induced modifications in crystallographic texture of (100), (101), (110), (200), (112), (004), and (211) as evidenced from the XRD results, which could probably explain the hardening effect that is caused by irradiation.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Tuning electrochemical and transport processes to achieve extreme performance and efficiency in solid oxide cells

Solid oxide cells (SOCs) have important applications as fuel cells and electrolyzers. The application for storage of renewable electricity is also becoming increasingly relevant; however, it is difficult to meet stringent area-specific resistance (ASR) and long-term stability targets needed to achieve required efficiency and cost. Here we show a new SOC that utilizes a very thin Gd-doped ceria (GDC)/yttria-stabilized zirconia (YSZ) bi-layer electrolyte, Ni–YSZ cell support with enhanced porosity, and electrode surface modification using PrO x and GDC nanocatalysts to achieve unprecedented low ASR values < 0.1 Ω cm 2 , fuel cell power density ~3 W cm –2 , and electrolysis current density ~4 A cm –2 at 800 °C. Besides this exceptionally high performance, fuel cell and electrolysis life tests suggest very promising stability in fuel cell and steam electrolysis modes. Furthermore, electrochemical impedance spectroscopy analysis done using a novel impedance subtraction method shows how rate-limiting electrode processes are impacted by the new SOC materials and design.

25 ENERGY STORAGE↗