Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “defect thermodynamics”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Synthesis of 2H/ fcc -Heterophase AuCu Nanostructures for Highly Efficient Electrochemical CO 2 Reduction at Industrial Current Densities

Structural engineering of nanomaterials offers a promising way for developing high-performance catalysts toward catalysis. However, the delicate modulation of thermodynamically unfavorable nanostructures with unconventional phases still remains a challenge. Here, in this study, the synthesis of hierarchical AuCu nanostructures is reported with hexagonal close-packed (2H-type)/face-centered cubic (fcc) heterophase, high-index facets, planar defects (e.g., stacking faults, twin boundaries, and grain boundaries), and tunable Cu content. The obtained 2H/fcc Au 99 Cu 1 hierarchical nanosheets exhibit excellent performance for the electrocatalytic CO 2 reduction to produce CO, outperforming the 2H/fcc Au 91 Cu 9 and fcc Au 99 Cu 1 . The experimental results, especially those obtained by in-situ differential electrochemical mass spectroscopy and attenuated total reflection Fourier-transform infrared spectroscopy, suggest that the enhanced catalytic performance of 2H/fcc Au 99 Cu 1 arises from the unconventional 2H/fcc heterophase, high-index facets, planar defects, and appropriate alloying of Cu. Impressively, the 2H/fcc Au 99 Cu 1 shows CO Faradaic efficiencies of 96.6% and 92.6% at industrial current densities of 300 and 500 mA cm -2 , respectively, as well as good durability, placing it among the best CO 2 reduction electrocatalysts for CO production. The atomically structural regulation based on phase engineering of nanomaterials (PEN) provides an avenue for the rational design and preparation of high-performance electrocatalysts for various catalytic applications.

36 MATERIALS SCIENCE↗
DOE OSTI2025

2D Vacancy Confinement in Anatase TiO 2 for Enhanced Photocatalytic Activities

Abstract Light‐driven energy conversion devices call for the atomic‐level manipulation of defects associated with electronic states in solids. However, previous approaches to produce oxygen vacancy (V O ) as a source of sub‐bandgap energy levels have hampered the precise control of the distribution and concentration ofV O . Here, a new strategy to spatially confineV O at the homo‐interfaces is demonstrated by exploiting the sequential growth of anatase TiO 2 under dissimilar thermodynamic conditions. Remarkably, metallic behavior with high carrier density and electron mobility is observed after sequential growth of the TiO 2 films under low pressure and temperature (L‐TiO 2 ) on top of high‐quality anatase TiO 2 epitaxial films (H‐TiO 2 ), despite the insulating properties of L‐TiO 2 and H‐TiO 2 single layers. Multiple characterizations elucidate that theV O layer is geometrically confined within 4 unit cells at the interface, along with low‐temperature crystallization of upper L‐TiO 2 films; this 2DV O layer is responsible for the formation of in‐gap states, promoting photocarrier lifetime (≈300%) and light absorption. These results suggest a synthetic strategy to locally confine functional defects and emphasize how sub‐bandgap energy levels in the confined imperfections influence the kinetics of light‐driven catalytic reactions.

Chemistry↗
DOE OSTI2021

Laser-induced annealing of aged PuO 2

Plutonium dioxide (PuO 2 ) is an important compound used in nuclear fuel, irradiation targets, and heat sources. As such, improved understanding of its structural and spectroscopic properties has numerous applications. Alpha particle-induced damage of a PuO 2 crystal lattice modifies several properties of its Raman spectrum, including band intensities, positions, and widths. The decay also induces growth of new bands and creates electron-trapped defects with luminescent properties. Herein, we show for the first time that laser-induced heating can reverse damage to an aged and damaged PuO 2 lattice. Using automated instrumentation to heat a single 6–10 μm spot to temperatures above 1,300°C, we show that laser-induced annealing of aged PuO 2 results in restoration of T2g band intensity with a concomitant decrease in defect band intensity, a result that indicates laser annealing can be used to reverse age-damage in PuO 2 . This laser annealing approach permitted in situ observation of temperature-dependent Raman spectral changes, thereby providing insight into the thermodynamics of structural alterations in a radiolytically damaged PuO 2 .

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2021

Stabilized Nanocrystalline Alloys: The Intersection of Grain Boundary Segregation with Processing Science

Processing science for nanocrystalline metals has largely focused on far-from-equilibrium methods that can generate many grain boundaries with excess defect energy. Conversely, the science of stabilizing nanocrystalline alloys has largely focused on the lowering of that excess defect energy through grain boundary segregation, bringing nanocrystalline structures closer to equilibrium. With increasing technological adoption of stabilized nanocrystalline alloys, there is a substantial need for research at the intersection of these two fields. This review lays out the basic thermodynamic issues of the two subfields and surveys the literature on the most common processing methods, including severe plastic deformation, ball milling, physical vapor deposition, and electrodeposition. We provide an overview of studies that have examined grain boundary segregation through each of these methods and identify general themes. We conclude that there is substantial scope for more systematic work at the intersection of these fields to understand how nonequilibrium processing affects grain boundary segregation.

Materials Science↗
NASA NTRS1986

The evolution and growth of Al2O3 scales on beta-NiAl

The formation and growth of Al2O3 scales on (beta)-NiAl were studied using electron microscopy and other analytical techniques to gain an understanding of the oxidation properties of (beta)-NiAl and of alumina-forming alloys, in general. The transient and mature stages of oxidation were studied as well as the transformation stage during which the oxide scale transforms from metastable Al2O3 phases to the thermodynamically stable alpha-Al2O3 phase. The transient oxidation stages were studied at 800 deg C and for short times at 1100C. At 800C, the scales consist predominantly of delta-Al2O3 which forms by cation vacancy ordering in the defective spinel lattice of gamma-Al2O3. At 1100C, a fast-growth morphology of theta-Al2O3 forms as a surface layer over delta-Al2O3. For both oxidation temperatures, the scales are often epitaxially oriented with respect to the metal. The transient scales grow by outward cation diffusion as evidenced by surface growth morphologies. The transformation to alpha-Al2O3 occurs within 1 hour at 1100C by a nucleation and radial growth process. The large volume decrease associated with the transformation results in a highly strained alpha-Al2O3 microstructure. A change in scale growth mechanism from outward cation to inward anion diffusion allows transient surface morphologies to be smoothed by surface diffusion. The mature stage of oxidation involves the growth of an alpha-Al2O3 scale having the lacey morphology formed as a result of the gamma yields alpha transformation. Growth of the scale occurs by counterdiffusion along grain boundaries resulting in ridges formed by impingement of alpha-Al2O3 nuclei during the transformation stage. Also scale growth occurs by inward oxygen diffusion through healed cracks; the cracks result from transformation stresses. The measured growth rates of scales having the lacey morphology are an order of magnitude less than fine-grained alpha-Al2O3 scales. Metal orientations were found to have a large effect on oxide morpholoies during all stages of oxidation.

Doychak, J. K.↗
DOE OSTI2022

Lamellae of α phase in a metastable β -Ti alloy studied by small-angle x-ray scattering

The shapes and orientations of lamellae of the hexagonal close-packed α phase in single crystals of the body-centred cubic β phase in a metastable β -Ti alloy (Timetal LCB) were investigated by synchrotron small-angle x-ray scattering. Several steps of thermal treatment with various annealing times and temperatures were employed. The measured scattering data were fitted to a model of ellipsoidal lamellae of random sizes, and the mean lamella shapes and orientations of their axes with respect to the β -Ti matrix were determined from the fit. The number and relative volume of the lamellae were estimated from the integrated scattered intensity. The elastic energy of the lamellae as well as the energy of defects at the α / β interface (misfit dislocations) were calculated from the parameters of the lamellae. In conclusion, the results provide information on the kinetics of the β $ \rightarrow$ α transformation in metastable β -Ti alloys and allow assessing the degree of thermodynamic equilibrium of the final α / β composite.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Thermochemistry of Layered and Two-Dimensional Niobium Carbo-Chalcogenides

Two-dimensional transition metal carbo-chalcogenides (TMCCs) represent a novel class of layered materials with tunable electronic structures and high chemical versatility, making them promising candidates for energy and environmental applications. In this work, the structural and thermochemical properties of a series of TMCCs are investigated. High-temperature oxidative solution calorimetry, conducted at 800 °C in molten sodium molybdate (3Na2O·4MoO3), was used to determine the enthalpies of oxidation and formation from the elements at 25 °C, enabling a comprehensive thermodynamic assessment. Comparison of these enthalpies reveals distinct stability trends across the series. Cu0.67Nb2S2C exhibits the most exothermic oxidation enthalpy, indicating a strong thermodynamic driving force for oxidation and reduced resistance to oxidative degradation. Its positive enthalpy of formation from the elements suggests lower thermodynamic stabilization relative to the other compositions, consistent with the energetic influence of Cu and residual Fe within the Nb–S–C framework. In contrast, delaminated Nb2S2C exhibits poor oxidative stability but a highly exothermic enthalpy of formation, consistent with a defect-rich, metastable structural state rather than enhanced lattice stability. These findings establish correlations between crystal structure and energetic stability, providing insights into the design of robust TMCC-based materials for advanced energy and environmental technologies.

Cassell, Nakeshma [Clemson University]↗
DOE OSTI2023

Elucidating Primary Degradation Mechanisms in High-Cycling-Capacity, Compositionally Tunable High-Entropy Hydrides

The hydrogen sorption properties of single-phase bcc (TiVNb) 100–x Cr x alloys (x = 0–35) are reported. All alloys absorb hydrogen quickly at 25 °C, forming fcc hydrides with storage capacity depending on the Cr content. Here, a thermodynamic destabilization of the fcc hydride is observed with increasing Cr concentration, which agrees well with previous compositional machine learning models for metal hydride thermodynamics. The steric effect or repulsive interactions between Cr–H might be responsible for this behavior. The cycling performances of the TiVNbCr alloy show an initial decrease in capacity, which cannot be explained by a structural change. Pair distribution function analysis of the total X-ray scattering on the first and last cycled hydrides demonstrated an average random fcc structure without lattice distortion at short-range order. If the as-cast alloy contains a very low density of defects, the first hydrogen absorption introduces dislocations and vacancies that cumulate into small vacancy clusters, as revealed by positron annihilation spectroscopy. Finally, the main reason for the capacity drop seems to be due to dislocations formed during cycling, while the presence of vacancy clusters might be related to the lattice relaxation. Having identified the major contribution to the capacity loss, compositional modifications to the TiVNbCr system can now be explored that minimize defect formation and maximize material cycling performance.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Process-driven roadmap for depositing super duplex stainless steel via wire Arc additive manufacturing

Here, this study systematically investigates the effects of shielding gas, bead spacing, weld mode, and travel speed on the phase balance, porosity, and hardness of wire arc additively manufactured (WAAM) super duplex stainless steel (ER2594). Robotic WAAM was employed to fabricate multilayer walls under systematically varied process conditions, followed by phase transformation simulations, X-ray computed tomography (XCT), electron backscatter diffraction (EBSD), and microhardness evaluation. Thermodynamic simulations predicted rapid cooling of AM process can suppress the potential formation of deleterious precipitates which was later validated via cross-sectional microstructure analyses of printed samples. XCT revealed porosity levels below 0.2% for all deposits, with reduced travel speed significantly lowering defect volume. Microstructural analyses revealed the evolution of various austenite precipitates, including grain boundary austenite (GBA), Widmanstätten austenite (WA), and intergranular austenite (IGA), sequentially upon cooling of the ferrite phase. Among all process parameters, weld transfer mode exhibited the strongest influence on phase balance; pulsed mode promoted higher ferrite retention (~ 36%) compared to RapidX mode. No consistent relationship between stabilized phase fraction and captured microhardness was observed. This work provides critical insights for optimizing WAAM parameters to control phase balance and mechanical performance, which is essential for producing high-integrity super duplex stainless-steel components for nuclear and marine applications.

Grain orientation↗
DOE OSTI2023

Oxide– and Silicate–Water Interfaces and Their Roles in Technology and the Environment

Interfacial reactions drive all elemental cycling on Earth and play pivotal roles in human activities such as agriculture, water purification, energy production and storage, environmental contaminant remediation, and nuclear waste repository management. The onset of the 21st century marked the beginning of a more detailed understanding of mineral aqueous interfaces enabled by advances in techniques that use tunable high-flux focused ultrafast laser and X-ray sources to provide near-atomic measurement resolution, as well as by nanofabrication approaches that enable transmission electron microscopy in a liquid cell. This leap into atomic- and nanometer-scale measurements has uncovered scale-dependent phenomena whose reaction thermodynamics, kinetics, and pathways deviate from previous observations made on larger systems. A second key advance is new experimental evidence for what scientists hypothesized but could not test previously, namely, interfacial chemical reactions are frequently driven by “anomalies” or “non-idealities” such as defects, nanoconfinement, and other nontypical chemical structures. Third, progress in computational chemistry has yielded new insights that allow a move beyond simple schematics, leading to a molecular model of these complex interfaces. In combination with surface-sensitive measurements, we have gained knowledge of the interfacial structure and dynamics, including the underlying solid surface and the immediately adjacent water and aqueous ions, enabling a better definition of what constitutes the oxide– and silicate–water interfaces. This critical review discusses how science progresses from understanding ideal solid–water interfaces to more realistic systems, focusing on accomplishments in the last 20 years and identifying challenges and future opportunities for the community to address. Further, we anticipate that the next 20 years will focus on understanding and predicting dynamic transient and reactive structures over greater spatial and temporal ranges as well as systems of greater structural and chemical complexity. Closer collaborations of theoretical and experimental experts across disciplines will continue to be critical to achieving this great aspiration.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Prediction of defect properties in concentrated solid solutions using a Langmuir-like model

The alleged existence of sluggish diffusion in high-entropy alloys has drawn controversy. In high-entropy alloys and, in general, in all solids, transport properties are controlled by point defect concentration, which must be known before performing atomistic simulations to compute transport coefficients. In this work, we present a general Langmuir-like model for defect concentration in an arbitrarily complex solid solution and apply this model to generate expressions for concentrations of vacancies and small interstitial atoms. We then calculate the vacancy concentration as a function of temperature in the equiatomic CoNiCrFeMn and FeAl alloys with modified embedded-atom-method potentials for various chemical orderings, showing there is no clear correlation between vacancy thermodynamics and chemical ordering in the CoNiCrFeMn alloy, but clear systematic patterns for FeAl. We believe this is due to the high stability of disordered, random, and ordered intermetallic phases, respectively, in the CoNiCrFeMn and FeAl systems. Finally, this work provides future avenues to the prediction of thermal interstitials and vacancies in solid solutions, which is necessary for models of nonequilibrium behavior of solid solutions.

composition↗
DOE OSTI2026

Two-dimensional non-equilibrium melting of charged colloids

Thermodynamic two-dimensional melting has been extensively studied in experiments and simulations, and is well predicted by theory. For systems in equilibrium, this transition is well described by the Kosterlitz–Thouless–Halperin–Nelson–Young theory, where melting is directly linked to the unbinding of topological defects. For driven, non-equilibrium melting and other non-equilibrium phase transitions, the picture is less clear. Here, in this work, we study the two-dimensional melting of a crystal of charged colloids. By randomly replacing some charged colloids with magnetic colloids, we can melt our system by rotating a fraction of the particles to create non-equilibrium, hydrodynamic random flows and local stresses. We can also melt it thermally by changing the particle number density. We find that an effective temperature approach cannot explain the results of our driven system. Rather, in both experiments and simulations, we observe that plotting the hexatic order parameter and the hexatic correlation’s exponent versus the density of disclinations and dislocations, respectively, yields universal curves. This implies that in our systems, two-dimensional melting depends directly on the density of topological defects and is independent of whether thermal or non-equilibrium forces generate them.

critical phenomena↗
DOE OSTI2020

Freezing water at constant volume and under confinement

Water expands upon freezing. What happens when water is cooled below 0 °C in an undeformable, constant-volume container? This is a fundamental question in materials thermodynamics, and is also relevant in biological, geological, and technological applications in which ice forms under nano-, meso-, or macroscale confinement. Here, we analyze the phase-equilibria and kinetic behaviors of water and ice-1h in an isochoric (constant-volume) system. By making use of the Helmholtz potential F (temperature, volume), in contrast to the Gibbs potential G (temperature, pressure), we demonstrate significant changes in phase behavior when the specific volume of the container is constrained below that of ice-1h. We construct a T–V (temperature–volume) phase diagram for water and ice that features a broad two-phase equilibrium region, and we further derive an isochoric nucleation theory that reveals the existence of a critical confinement volume, on the order of microns, below which ice-1h is kinetically prohibited from forming.

42 ENGINEERING↗
DOE OSTI2020

Effects of surface chemical potentials on cation segregation

Surface cation segregation on perovskite-type electrodes is one of the major issues limiting the durability of high-temperature solid-oxide electrochemical cells, and this process is strongly dependent on temperature, the external gas-environment, and impurities in air, such as CO 2 . Here cation segregation on La 0.6 Sr 0.4 Co 0.2 Fe 0.8 O 3-δ (LSCF) is systematically evaluated under a set of chemical potentials to determine the origin of surface segregation and the dominant factors that govern the segregation process. Temperature is the main driving force for surface strontium segregation as the thermodynamic stability of each phase varies, and the SrO particles appear primarily in a specific operating window. In addition to the required thermal energy, the presence of gaseous oxygen-containing molecules as reactants help drive the precipitation of SrO. Oxygen partial pressure (pO 2 ) controls the defect chemistry of LSCF, leading to promotion or suppression of surface segregation. The presence of CO 2 promotes the nucleation process and suppresses the surface migration step, significantly altering the surface morphology. We also show that A-site deficiency can limit the SrO segregation in certain conditions but shows no effect in others. This study reveals the impact of gas–solid interactions on surface segregation and highlights the subtle relationship between multiple segregation driving forces.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Quantum Statistics of Vortices from a Dual Theory of the X Y Ferromagnet

In this work, we extend the well-known mapping between the easy-plane ferromagnet and electrostatics in d = 2 spatial dimensions to dynamical and quantum phenomena in a d = 2+1 spacetime. Ferromagnetic vortices behave like quantum particles with an electric charge equal to the vortex number and a magnetic flux equal to the transverse spin of the vortex core. Vortices with half-integer core spin exhibit fermionic statistics.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2023

Frustrated Magnetism and Ferroelectricity in a Dy 3+ -Based Triangular Lattice

Triangular lattice magnets have attracted extensive research interest because they are potential hosts for geometrically frustrated magnetism and strong quantum fluctuations. Here, utilizing a laser floating zone technique, we report the first-time successful growth of a DyInO 3 sizable crystal, which contains Dy3+-based triangular layers. The fine-tuning of Indium stoichiometry was found to be the key factor in the stabilization of the desired hexagonal phase. The X-ray diffraction study of the crystal structure reveals a non-centrosymmetric P6 3mc space group. Switchable polarization, i.e., ferroelectricity, and ferroelectric domain configuration are experimentally demonstrated at room temperature. Anisotropic magnetic and thermodynamic measurements unveil antiferromagnetic interactions, the absence of long-range ordering down to 0.1 K, and a possible doublet ground state, indicating a strongly frustrated magnetism. Our findings suggest that the DyInO 3 crystal is an excellent platform for studying emergent phenomena and their interplay with coherent topological defects in the quantum realm.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Thermodynamic controls on the synthesis, structure and reactivity of materials for energy (Final Report)

The major objectives have been: a) to advance and use unique calorimetric capabilities to determine the energetics of oxide and other materials having possible energy applications, with an emphasis on new materials for batteries, fuel cells and solar energy conversion, b) to understand, in terms of both macroscopic energetics and microscopic structure and bonding, the interplay of defect chemistry, oxidation-reduction, and size effects at the bulk and nanoscale in determining materials properties. This project emphasizes mixed ionic-electronic conduction materials containing transition metals of variable valence, especially perovskites and lithium containing phases, with M = Mn, Fe, Co, Ni. The thermochemistry of new families of complex halide, chalcogenide, nitride and hybrid (organic-inorganic) perovskite materials were explored. The major and unique technique employed is high temperature oxide melt solution calorimetry, with careful attention given to materials synthesis and characterization. The thermochemical studies will be coupled with structural studies, especially to characterize order-disorder phenomena by in situ high temperature diffraction techniques.

14 SOLAR ENERGY↗