Instability of the current sheet in the Earth's magnetotail with normal magnetic field
Not Available
SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Not Available
This paper describes the design of a system for the characterization of magnetic hysteresis behavior in soft ferrite magnetic cores. The proposed setup can test magnetic materials exciting them with controlled arbitrary magnetic field waveforms, including the capability of providing a DC bias, in a frequency bandwidth up to 500 kHz, with voltages up to 32 V peak-to-peak, and currents up to 10 A peak-to-peak. In order to have an accurate control of the magnetic field waveform, the system is based on a voltage controlled current source. The electronic design is described focusing on closed loop feedback stabilization and passive components choice. The system has real-time hysteretic loop acquisition and visualization. The comparisons between measured hysteresis loops of sample magnetic materials and datasheet available ones are shown. Results showing frequency and thermal behavior of the hysteresis of a test sample prove the system capabilities. Moreover, the B-H loops obtained with a multiple waveforms excitation signal, including DC bias, are reported. The proposal is a low-cost and replicable solution for hysteresis characterization of magnetic materials used in power electronics.
We present simulations of inductive helicity injection in the Helicity Injected Torus with Steady Inductive helicity injection (HIT-SI) device that treats the entire plasma volume in a single dynamic MHD model. A new fully 3D numerical tool, the PSI-center TETrahedral mesh code, was developed that provides the geometric flexibility required for this investigation. Implementation of a zero-β Hall MHD model using PSI-TET will be presented including formulation of a new self-consistent magnetic boundary condition for the wall of the HIT-SI device. Results from simulations of HIT-SI are presented focusing on injector dynamics that are investigated numerically for the first time. Asymmetries in the plasma loading between the two helicity injectors and progression of field reversal in each injector are observed. Analysis indicates cross-coupling between injectors through confinement volume structures. Injector impedance is found to scale with toroidal current at fixed density, consistent with experimental observation. Comparison to experimental data with an injector drive frequency of 14.5 kHz shows good agreement with magnetic diagnostics. Global mode structures from Bi-Orthogonal decomposition agree well with experimental data for the first four modes.
The longitudinal spin Seebeck effect (LSSE) has been investigated in high-quality epitaxial CoFe 2 O 4 (CFO) thin films. The thermally excited spin currents in the CFO films are electrically detected in adjacent Pt layers due to the inverse spin Hall effect (ISHE). The LSSE signal exhibits a linear increase with increasing temperature gradient, yielding a LSSE coefficient of –100 nV/K at room temperature. The temperature dependence of the LSSE is investigated from room temperature down to 30 K, showing a significant reduction at low temperatures, revealing that the total amount of thermally generated magnons decreases. Moreover, we demonstrate that the spin Seebeck effect is an effective tool to study the magnetic anisotropy induced by epitaxial strain, especially in ultrathin films with low magnetic moments.
Kinetic simulations have demonstrated that three-dimensional reconnection in collisionless regimes proceeds through the formation and interaction of magnetic flux ropes, which are generated due to the growth of tearing instabilities at multiple resonance surfaces. Since kinetic simulations are intrinsically expensive, it is desirable to explore the feasibility of reduced two-fluid models to capture this complex evolution, particularly, in the strong guide field regime, where two-fluid models are better justified. With this goal in mind, this paper compares the evolution of the collisionless tearing instability in a force-free current sheet with a two-fluid model and fully kinetic simulations. Our results indicate that the most unstable modes are oblique for guide fields larger than the reconnecting field, in agreement with the kinetic results. The standard two-fluid tearing theory is extended to address the tearing instability at oblique angles. The resulting theory yields a flat oblique spectrum and underestimates the growth of oblique modes in a similar manner to kinetic theory relative to kinetic simulations.
We present an MHD theory of Rayleigh-Taylor instability on the surface of a magnetically confined cylindrical plasma flux rope in a lateral external gravity field. The Rayleigh-Taylor instability is found to couple to the classic current-driven instability, resulting in a new type of hybrid instability that cannot be described by either of the two instabilities alone. The lateral gravity breaks the axisymmetry of the system and couples all azimuthal modes together. The coupled instability, produced by combination of helical magnetic field, curvature of the cylindrical geometry, and lateral gravity, is fundamentally different from the classic magnetic Rayleigh-Taylor instability occurring at a two-dimensional planar interface. The theory successfully explains the lateral Rayleigh-Taylor instability observed in the Caltech plasma jet experiment [Moser and Bellan, Nature 482, 379 (2012)]. Potential applications of the theory include magnetic controlled fusion, solar emerging flux, solar prominences, coronal mass ejections, and other space and astrophysical plasma processes.
A simple approximation for the current-voltage characteristics of a relativistic electron diode is presented. The approximation is accurate from non-relativistic through relativistic electron energies. Although it is empirically developed, it has many of the fundamental properties of the exact diode solutions. The approximation is simple enough to be remembered and worked on almost any pocket calculator, so it has proven to be quite useful on the laboratory floor.
We report the demonstration of dilute nitride heterostructure core/shell microwire solar cells utilizing the combination of top-down reactive-ion etching to create the cores (GaP) and molecular beam epitaxy to create the shells (GaNP). Systematic studies of cell performance over a series of microwire lengths, array periods, and microwire sidewall morphologies examined by transmission electron microscopy were conducted to shed light on performance-limiting factors and to optimize the cell efficiency. We show by microscopy and correlated external quantum efficiency characterization that the open circuit voltage is degraded primarily due to the presence of defects at the GaP/GaNP interface and in the GaNP shells, and is not limited by surface recombination. Compared to thin film solar cells in the same growth run, the microwire solar cells exhibit greater short circuit current but poorer open circuit voltage due to greater light absorption and number of defects in the microwire structure, respectively. The comprehensive understanding presented in this work suggests that performance benefits of dilute nitride microwire solar cells can be achieved by further tuning of the epitaxial quality of the underlying materials.
Hybrid organic-inorganic perovskites have shown great promise for spintronic applications due to their large spin-orbit coupling induced by the Pb and halogen atoms. Particularly, the large observed surface-induced Rashba splitting in CH3NH3PbBr3 indicates efficient spin-current-to-charge-current (StC) conversion, which, however, has not been demonstrated yet. In this work, the StC conversion efficiency in ferromagnet/CH3NH3PbBr3-based devices is studied using the pulsed spin-pumping technique measured by the inverse spin Hall effect. We found that the StC conversion efficiency is anomalous in that it increases at small perovskite layer thickness. This indicates the existence of a surface-dominated StC mechanism such as the inverse Rashba-Edelstein effect. By inserting a thin LiF layer between the ferromagnet and the perovskite film, the StC conversion efficiency is greatly suppressed, validating the existence of a Rashba surface in the CH3NH3PbBr3 film.
In fixed-boundary axisymmetric equilibrium calculations the plasma shape is assigned from input. In several circumstances, the plasma shape may not be known a priori, or one may desire to also compute the magnetic field in the volume surrounding the plasma through the calculation of a free-boundary equilibrium. This requires either the coil currents or the magnetic poloidal flux on a curve in the vacuum region to be assigned as input for the free-boundary equilibrium calculation. The FREE-FIX code presented in this article is a general tool for calculating coil currents being given a fixed-boundary calculation. Finally, a new formulation is presented, which considerably reduces the computational cost of the calculation. FREE-FIX performs well for different geometries and experiments.
Hot cathodes are crucial components in a variety of plasma sources and applications, but they induce mode transitions and oscillations that are not fully understood. It is often assumed that negatively biased hot cathodes have a space-charge limited (SCL) sheath whenever the current is limited. Here, we show on theoretical grounds that a SCL sheath cannot persist. First, charge-exchange ions born within the virtual cathode (VC) region get trapped and build up. After the ion density reaches the electron density at a point in the VC, a new neutral region is formed and begins growing in space. In planar geometry, this 'new plasma' containing cold trapped ions and cold thermoelectrons grows towards the anode and fills the gap, leaving behind an inverse cathode sheath. This explains how transitions from temperature-limited mode to anode glow mode occur in thermionic discharge experiments with magnetic fields. If the hot cathode is a small filament in an unmagnetized plasma, the trapped ion region is predicted to grow radially in both directions, get expelled if it reaches the cathode, and reform periodically. Filament-induced current oscillations consistent with this prediction have been reported in experiments. Here, we set up planar geometry simulations of thermionic discharges and demonstrate several mode transition phenomena for the first time. Lastly, our continuum kinetic code lacks the noise of particle simulations, enabling a closer study of the temporal dynamics.
We report the critical current density J c in K x Fe 2-y Se 2-z S z crystals. The J c can be enhanced significantly with optimal S doping (z=0.99). For K 0.70(7) Fe 1.55(7) Se 1.01(2) S 0.99(2) , the weak fishtail effect is found for H II c. The normalized vortex pinning forces follow the scaling law with a maximum position at 0.41 of the reduced magnetic field. These results demonstrate that the small size normal point defects dominate the vortex pinning mechanism.
The critical current density Jabc of K x Fe 2-y Se₂ single crystals can be enhanced by more than one order of magnitude, up to ~2.1×10⁴ A/cm² by the post annealing and quenching technique. A scaling analysis reveals the universal behavior of the normalized pinning force as a function of the reduced field for all temperatures, indicating the presence of a single vortex pinning mechanism. The main pinning sources are three-dimensional (3D) point-like normal cores. The dominant vortex interaction with pinning centers is via spatial variations in critical temperature T c (“δT c pinning”).
Here, quantum Monte Carlo calculations of electromagnetic moments and transitions are reported for A ≤ 9 nuclei. The realistic Argonne v 18 two-nucleon and Illinois-7 three-nucleon potentials are used to generate the nuclear wave functions. Contributions of two-body meson-exchange current (MEC) operators are included for magnetic moments and M1 transitions. The MEC operators have been derived in both a standard nuclear physics approach and a chiral effective field theory formulation with pions and nucleons including up to one-loop corrections. The two-body MEC contributions provide significant corrections and lead to very good agreement with experiment. Their effect is particularly pronounced in the A=9, T=3/2 systems, in which they provide up to ~20% (~40%) of the total predicted value for the 9 Li( 9 C) magnetic moment.
The largest sample ever recorded of v ¯ μ charged-current quasielastic (CCQE, ν ¯<!-- ¯ --> μ + p → μ + + n ) candidate events is used to produce the minimally model-dependent, flux-integrated double-differential cross section d 2 σ d T μ d c o s θ μ ν ¯<!-- ¯ --> μ for v ¯ μ CCQE for a mineral oil target. This measurement exploits the large statistics of the MiniBooNE antineutrino mode sample and provides the most complete information of this process to date. In order to facilitate historical comparisons, the flux-unfolded total cross section $σ(E_ν)$ and single-differential cross section d dσ Q 2 on both mineral oil and on carbon are also reported. The observed cross section is somewhat higher than the predicted cross section from a model assuming independently acting nucleons in carbon with canonical form factor values. The shape of the data are also discrepant with this model. Finally, these results have implications for intranuclear processes and can help constrain signal and background processes for future neutrino oscillation measurements.
We employ dimension-4 operators to improve the local vector and axial-vector currents and calculate the nucleon isovector axial coupling $g$ ${^3}_{A}$ with overlap valence on 2 + 1-flavor domain wall fermion (DWF) sea. Using the equality of $g$ ${^3}_{A}$ from the spatial and temporal components of the axial-vector current as a normalization condition, we find that $g$ ${^3}_{A}$ is increased by a few percent towards the experimental value. Here, the excited-state contamination has been taken into account with three time separations between the source and sink. The improved axial charges $g$ ${^3}_{A}$ (24I) = 1.22 (4) (3) and $g$ ${^3}_{A}$ (32I) = 1.21 (3)(3) are obtained on a 24 3 × 64 lattice at pion mass of 330 MeV and a 32 3 × 64 lattice at pion mass 300 MeV and are increased by 3.4% and 1.7% from their unimproved values, respectively. We have also used clover fermions on the same DWF configurations and find the same behavior for the local axial charge as that with overlap fermions.
Here, we report results from the first search for sterile neutrinos mixing with active neutrinos through a reduction in the rate of neutral-current interactions over a baseline of 810 km between the NOvA detectors. Analyzing a 14-kton detector equivalent exposure of 6.05 × 10 20 protons-on-target in the NuMI beam at Fermilab, we observe 95 neutral-current candidates at the Far Detector compared with 83.5 ± 9.7(stat) ± 9.4(syst) events predicted assuming mixing only occurs between active neutrino species. No evidence for νμ→νs transitions is found. Interpreting these results within a 3+1 model, we place constraints on the mixing angles θ 24 < 20.8° and θ 34 < 31.2° at the 90% C.L. for 0.05 eV 2 ≤ Δm 41 2 ≤ 0.5 eV 2 , the range of mass splittings that produce no significant oscillations over the Near Detector baseline.