Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “crystal”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14

High-level expression, purification, crystallization and preliminary X-ray crystallographic studies of the receptor-binding domain of botulinum neurotoxin serotype D

Botulinum neurotoxins (BoNTs) are highly toxic proteins for humans and animals that are responsible for the deadly neuroparalytic disease botulism. Here, details of the expression and purification of the receptor-binding domain (HCR) of BoNT/D in Escherichia coli are presented. Using a codon-optimized cDNA, BoNT/D{_}HCR was expressed at a high level (150-200 mg per litre of culture) in the soluble fraction. Following a three-step purification protocol, very pure (>98%) BoNT/D{_}HCR was obtained. The recombinant BoNT/D{_}HCR was crystallized and the crystals diffracted to 1.65 {angstrom} resolution. The crystals belonged to space group P2{sub 1}2{sub 1}2{sub 1}, with unit-cell parameters a = 60.8, b = 89.7, c = 93.9 {angstrom}. Preliminary crystallographic data analysis revealed the presence of one molecule in the asymmetric unit.

59 BASIC BIOLOGICAL SCIENCES↗

Nanostructured crystals of fluorite phases Sr{sub 1-x}R{sub x}F{sub 2+x} (R are rare earth elements) and their ordering: 5. A study of the ionic conductivity of as-grown Sr{sub 1-x}R{sub x}F{sub 2+x} crystals

The ionic conductivity {sigma} of Sr{sub 1-x}R{sub x}F{sub 2+x} crystals (R = Y, La-Lu) has been measured in the temperature range of 324-933 K. The isomorphic introduction of R{sup 3+} ions into SrF{sub 2} is accompanied by an increase in conductivity up to four orders of magnitude, which makes these crystals superionic conductors. It is shown that the conduction mechanism in Sr{sub 1-x}R{sub x}F{sub 2+x} crystals changes when passing from R = La-Nd to R = Sm-Lu. A change in the type of cluster of structural defects between Nd and Sm is suggested. The concentration dependences of {sigma} and the activation energy of charge-carrier migration (E{sub a}) for Sr{sub 1-x}R{sub x}F{sub 2+x} are nonlinear. For crystals with R = La or Nd, these dependences are interpreted within the percolation model of 'defect regions,' the minimum size of which is estimated to be {approx}700 A{sup 3}. It is shown that the electrical properties of the crystals can be controlled by varying the RF{sub 3} type and concentration. The Sr{sub 1-x}R{sub x}F{sub 2+x} crystals (R = La-Nd, 0.3 {<=} x {<=} 0.5), for which {sigma} = (2-3) x 10{sup -2} S/cm at 673 K and E{sub a} = 0.6-0.7 eV, have the best electrolytic characteristics.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Spin-lattice relaxation of {sup 113}Cd and {sup 19}F nuclear spins in the crystal lattice of CdF{sub 2} semiconductor crystals with DX centers

Temperature dependences of spin-lattice relaxation rates of the {sup 113}Cd and {sup 19}F lattice nuclei in the CdF{sub 2} semiconductor crystals containing bistable In and Ga impurity centers show that the relaxation mechanisms in the CdF{sub 2}:In and CdF{sub 2}:Ga crystals are different. The basic mechanism of spin-lattice relaxation of the {sup 113}Cd nuclei in the CdF{sub 2}:In crystal is the scalar contact's interaction of nuclear spins with spins of mobile charge carriers of the conduction band. In the CdF{sub 2}:Ga crystal, relaxation of the {sup 113}Cd nuclei is controlled by the contact interaction with electrons moving within a narrow band of impurity states. The same mechanism is apparently responsible for relaxation of the {sup 19}F nuclei in this crystal. In the CdF{sub 2}:In crystal, the {sup 19}F nuclei relax by the dipole-dipole interaction with electron spins localized at the hydrogen-like orbits of shallow donors.

36 MATERIALS SCIENCE↗

On Change in the Silicon Crystal Structure Implanted with Hydrogen Ions during Annealing Based on Three-Crystal X-Ray Diffractometry Data

In this paper, we present the results of a three-crystal X-ray diffractometry (XRD) study of the state of a disturbed layer formed in silicon crystals by implantation of hydrogen ions with energies of 100 + 200 + 300 keV and a total dose of 2 × 10{sup 16} cm{sup –2} during the subsequent heat exposure in the temperature range from 200 to 1100°C. Here, X-ray studies were performed in the three-crystal XRD scheme when the sample under consideration operates as a second stationary crystal with various fixed angular detuning α from the Bragg position while the third (perfect) crystal-analyzer sweeps the angular distribution of radiation diffracted by the second crystal. Based on a comparison of the shape of diffraction and diffuse maxima for the samples under study, a qualitative conclusion about a significant transformation of radiation defects at post-implantation annealing was derived.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

How Accurate Can Crystal Structure Predictions Be for High-Energy Molecular Crystals?

Molecular crystals have shallow potential energy landscapes, with multiple local minima separated by very small differences in total energy. Predicting molecular packing and molecular conformation in the crystal generally requires ab initio methods of high accuracy, especially when polymorphs are involved. We used dispersion-corrected density functional theory (DFT-D) to assess the capabilities of an evolutionary algorithm (EA) for the crystal structure prediction (CSP) of well-known but challenging high-energy molecular crystals (HMX, RDX, CL-20, and FOX-7). While providing the EA with the experimental conformation of the molecule quickly re-discovers the experimental packing, it is more realistic to start instead from a naïve, flat, or neutral initial conformation, which reflects the limited experimental knowledge we generally have in the computational design of molecular crystals. By doing so, and using fully flexible molecules in fully variable unit cells, we show that the experimental structures can be predicted in fewer than 20 generations. Nonetheless, one must be aware that some molecular crystals have naturally hindered evolutions, requiring as many attempts as there are space groups of interest to predict their structures, and some may require the accuracy of all-electron calculations to discriminate between closely ranked structures. To save resources in this computationally demanding process, we showed that a hybrid xTB/DFT-D approach could be considered in a subsequent study to push the limits of CSP beyond 200+ atoms and for cocrystals.

42 ENGINEERING↗

Crystal structure of Mdm12 and combinatorial reconstitution of Mdm12/Mmm1 ERMES complexes for structural studies

Membrane contact sites between organelles serve as molecular hubs for the exchange of metabolites and signals. In yeast, the Endoplasmic Reticulum – Mitochondrion Encounter Structure (ERMES) tethers these two organelles likely to facilitate the non-vesicular exchange of essential phospholipids. Present in Fungi and Amoebas but not in Metazoans, ERMES is composed of five distinct subunits; among those, Mdm12, Mmm1 and Mdm34 each contain an SMP domain functioning as a lipid transfer module. We previously showed that the SMP domains of Mdm12 and Mmm1 form a hetero-tetramer. Here we describe our strategy to diversify the number of Mdm12/Mmm1 complexes suited for structural studies. We use sequence analysis of orthologues combined to protein engineering of disordered regions to guide the design of protein constructs and expand the repertoire of Mdm12/Mmm1 complexes more likely to crystallize. Using this combinatorial approach we report crystals of Mdm12/Mmm1 ERMES complexes currently diffracting to 4.5 Å resolution and a new structure of Mdm12 solved at 4.1 Å resolution. Our structure reveals a monomeric form of Mdm12 with a conformationally dynamic N-terminal β-strand; it differs from a previously reported homodimeric structure where the N-terminal β strands where swapped to promote dimerization. Based on our electron microscopy data, we propose a refined pseudo-atomic model of the Mdm12/Mmm1 complex that agrees with our crystallographic and small-angle X-ray scattering (SAXS) solution data. - Highlights: • We solved a 4.1 Å resolution crystal structure of Mdm12, the soluble subunit of ERMES. • The two Mdm12 apo monomers differ in the conformation of their N-terminal β-strands. • We reconstituted and crystallized two distinct Mdm12/Mmm1 complexes. • SAXS analysis of the complexes agrees with our previous electron microscopy data. • The structure suggests a head-to-tail association in the Mdm12/Mmm1 complex.

60 APPLIED LIFE SCIENCES↗

Predictive modeling of crystal accumulation in high-level waste glass melters processing radioactive waste

The effectiveness of HLW vitrification is limited by precipitation/accumulation of spinel crystals [(Fe, Ni, Mn, Zn)(Fe, Cr)2O4] in the glass discharge riser of Joule-heated ceramic melters during idling. These crystals do not affect glass durability; however, if accumulated in thick layer, they can clog the melter and prevent discharge of molten glass into canisters. To address this problem, an empirical model was developed that can predict thicknesses of accumulated layers as a function of glass composition. This model predicts well the accumulation of single crystals and/or small-scale agglomerates, but, excessive agglomeration observed in high-Ni-Fe glass resulted in an under-prediction of accumulated layers, which gradually worsen over time as an increased number of agglomerates formed. Accumulation rate of ~53.8 ± 3.7 µm/h determined for this glass will result in ~26 mm thick layer in 20 days of melter idling.

Crystal accumulation↗

A Dual-Channel, Curved-Crystal Spectrograph for Petawatt Laser, X-Ray Backlighter Source Studies

A dual-channel, curved-crystal spectrograph was designed to measure time-integrated x-ray spectra in the ~1.5 to 2 keV range (6.2–8.2 Å wavelength) from small-mass, thin-foil targets irradiated by the VULCAN petawatt laser focused up to 4 x 10^20 W/cm^2. The spectrograph consists of two cylindrically curved potassium-acid-phthalate crystals bent in the meridional plane to increase the spectral range by a factor of ~10 compared to a flat crystal. The device acquires single-shot x-ray spectra with good signal-to-background ratios in the hard x-ray background environment of petawatt laser-plasma interactions. The peak spectral energies of the aluminum He-alpha and Ly-alpha resonance lines were ~1.8 and ~1.0 mJ/eV sr (~0.4 and 0.25 J/Å sr), respectively, for 220 J, 10 ps laser irradiation.

Theobald, W↗

Measurement and models of bent KAP(001) crystal integrated reflectivity and resolution (invited)

The Advanced Light Source beamline-9.3.1 x-rays are used to calibrate the rocking curve of bent potassium acid phthalate (KAP) crystals in the 2.3-4.5 keV photon-energy range. Crystals are bent on a cylindrically convex substrate with a radius of curvature ranging from 2 to 9 in. and also including the flat case to observe the effect of bending on the KAP spectrometric properties. As the bending radius increases, the crystal reflectivity converges to the mosaic crystal response. The X-ray Oriented Programs (XOP) multi-lamellar model of bent crystals is used to model the rocking curve of these crystals and the calibration data confirm that a single model is adequate to reproduce simultaneously all measured integrated reflectivities and rocking-curve FWHM for multiple radii of curvature in both 1st and 2nd order of diffraction.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Orientation-tunable local crystallization of Si films enabled by atomic imprint crystallization

Here, in this paper, we demonstrate area-selective crystallization of amorphous Si into tunable crystal orientations enabled by atomic imprint crystallization (AIC), where an amorphous Si layer is crystallized by solid phase epitaxy (SPE) from an externally impressed single-crystalline Si template. Using micro-patterned single-crystalline Si templates, a limited area of an amorphous Si film, where the film surface and patterned template surface are in contact, is crystallized via SPE to create an array of crystallographically aligned dots embedded in amorphous matrix. Combining AIC from the top surface and conventional SPE from the substrate, we demonstrate the fabrication of an array of crystalline dots embedded in single-crystalline matrix with tunable in-plane rotation angle. The results indicate the high tunability of the crystallization process enabled by AIC, allowing precise control of crystallographic properties of thin films with area-selectivity; such capability opens opportunities for the design of new materials for a wide range of applications in materials science.

Amorphous↗

Cloning, purification, crystallization and preliminary X-ray analysis of the catalytic domain of human receptor-like protein tyrosine phosphatase [gamma] in three different crystal forms

Protein tyrosine phosphatase {gamma} is a membrane-bound receptor and is designated RPTP{gamma}. RPTP{gamma} and two mutants, RPTP{gamma}(V948I, S970T) and RPTP{gamma}(C858S, S970T), were recombinantly expressed and purified for X-ray crystallographic studies. The purified enzymes were crystallized using the hanging-drop vapor-diffusion method. Crystallographic data were obtained from several different crystal forms in the absence and the presence of inhibitor. In this paper, a description is given of how three different crystal forms were obtained that were used with various ligands. An orthorhombic crystal form and a trigonal crystal form were obtained both with and without ligand, and a monoclinic crystal form was only obtained in the presence of a particularly elaborated inhibitor.

59 BASIC BIOLOGICAL SCIENCES↗

Crystallization of Sodium Phosphate Dodecahydrate and Re-crystallization to Natrophosphate in Simulated Hanford Nuclear Waste - 16188

The nuclear waste at the Hanford site near Richland, WA, has large concentrations of phosphate in the form of the phosphate ion, sodium phosphate dodecahydrate (Na{sub 3}PO{sub 4}.12H{sub 2}O.(1/4)NaOH) and natrophosphate (Na{sub 7}F(PO{sub 4}){sub 3}.19H{sub 2}O). Sodium phosphate dodecahydrate can form a gel and natrophosphate can crystallize large particles, complicating the processing of slurries of both salts. The gel is regarded as more problematic, so natrophosphate has historically been crystallized to prevent phosphate gelling. This study determined if natrophosphate crystals can grow to large size in short time periods (a few weeks), time periods relevant to short process shutdowns. Solutions of NaOH and NaAl(OH){sub 4} were blended at different ratios with stock solutions containing NaOH, NaF, and Na{sub 3}PO{sub 4} at 50 deg. C. The mixtures were allowed to cool to 22 deg. C, and the crystal growth was monitored by Polarized Light Microscopy (PLM) for 17 days. Four of the six blends investigated gelled rapidly due to Na{sub 3}PO{sub 4}.12H{sub 2}O.(1/4)NaOH precipitation. The gel slowly dissipated over time as the solids recrystallized into natrophosphate. In one case, the natrophosphate reached sizes of greater than 1000 microns in diameter in just 4 days. This rapid gelling and crystallization kinetics is important to engineers trying to manage nuclear wastes high in phosphates. Hanford tank farm engineers are developing sampling plans to support temperature and process control strategies for preventing the formation of solid phosphates. They are also developing methods of suspending large natrophosphate crystals. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Synthesis and crystal structure of CuZrTiO{sub 5}-A new crystal structure type

A new compound, CuZrTiO{sub 5}, was synthesized as strongly pleochroic green crystals from the oxides between 995 and 1010 deg. C, 1 atm. Its crystal structure was determined by single crystal XRD, resulting in R (F{sup 2}>2sigma(F{sup 2}))=0.032 and wR (all data)=0.079). CuZrTiO{sub 5} is orthorhombic, space group P2{sub 1}2{sub 1}2{sub 1}, a=3.5871(3) A, b=6.6968(4) A, c=14.6679(9) A, V=352.35(4) A{sup 3}, Z=4. The structure is topologically similar to In{sub 2}TiO{sub 5} but differs in space group and cation coordination. CuZrTiO{sub 5} has relatively regular TiO{sub 6} polyhedra, but coordination is 7+1 for Zr, and 4+2 for Cu due to the Jahn-Teller effect. Ordering of the long Cu-O bonds causes reduction in symmetry relative to In{sub 2}TiO{sub 5}. Layers of Cu alternate with Ti+Zr on (001), giving rise to a distinct cleavage. Bond valence sums on Ti and Zr are far from ideal, which appears due to the limited ability of this structural topology to avoid close next-nearest neighbour distances. - Graphical abstract: The new compound CuZrTiO{sub 5} is orthorhombic (P2{sub 1}2{sub 1}2{sub 1}), with a=3.5871(3) A, b=6.6968(4) A, c=14.6679(9) A. The structure, determined with single crystal XRD, represents a new crystal structure type that is a slight distortion of that of In{sub 2}TiO{sub 5} but differs in space group and cation coordination.

36 MATERIALS SCIENCE↗