SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
The criteria for selecting site locations and constructing observing pads and monuments for the Mobile VLB1 and the satellite laser ranging systems used in the NASA/GSFC Crustal Dynamics Project are discussed. Gross system characteristics (size, shape, weight, power requirement, foot prints, etc.) are given for the Moblas, MV-1 through 3, TLRS-1 through 4 and Series instruments.
The 1982 Crustal Dynamics Project observations by fixed and mobile SLR and VLBI systems are reviewed. Plate motion measurements between North America and Europe were conducted by both techniques and SLR measurements were also made between North America, the Pacific, Australia and South American plates. Regional deformation measurements by VLBI and SLR systems were restricted to the western United States in 1982, including a number of important intercomparison baseline measured by both techniques. In 1983 the observing program grows significantly, with new SLR systems in Mexico, Easter Island, the Pacific and Italy. New VLBI systems will include a dedicated VLBI site at Weltzell, in Germany. Two highly mobile SLR and two highly mobile VLBI systems will greatly increase the regional deformation measurements in California and through the Basin and Range, where more than 25 sites will be occupied in 1983.
Sediment exists on the Venus surface. It is observed in Venera images between outcrops and boulders of sedimentary rocks. Sediment is produced by pyroclastic volcanism and chemical weathering. Chemical weathering is driven by an enhanced activity of water and an elevated surface temperature. Sediment is transported by wind action and lithified by cementration and diagenesis. Cementation may be by carbonate or silica cement; diagenesis may be products of chemical weathering acting as cement, or by compaction and recrystallization of sediment into a texture with interlocking grains. Sediment may be transported from the top of sialic continents (such as Ishtar) to the modal plains where it is deposited, lithified, and integrated into thy local crust. As new layers are added, the bottom of the crust melts and is, in part, returned to the mantle. A steady-state chemical exchange might exist by this mechanism of crustal cycling that links atmosphere, continents, modal plains, and mantle.
The stress field in the earth's crust as inferred from satellite gravity data causes crustal deformation and seismotectonic block movements in central Europe. The satellite-determined stresses in the crust of central Europe are consistent with earthquake focal mechanisms, joint-orientation and in situ stress measurements.
The crustal deformation patterns associated with the earthquake cycle can depend strongly on the rheological properties of subcrustal material. Substantial deviations from the simple patterns for a uniformly elastic earth are expected when viscoelastic flow of subcrustal material is considered. The detailed description of the deformation pattern and in particular the surface displacements, displacement rates, strains, and strain rates depend on the structure and geometry of the material near the seismogenic zone. The origin of some of these differences are resolved by analyzing several different linear viscoelastic models with a common finite element computational technique. The models involve strike-slip faulting and include a thin channel asthenosphere model, a model with a varying thickness lithosphere, and a model with a viscoelastic inclusion below the brittle slip plane. The calculations reveal that the surface deformation pattern is most sensitive to the rheology of the material that lies below the slip plane in a volume whose extent is a few times the fault depth. If this material is viscoelastic, the surface deformation pattern resembles that of an elastic layer lying over a viscoelastic half-space. When the thickness or breath of the viscoelastic material is less than a few times the fault depth, then the surface deformation pattern is altered and geodetic measurements are potentially useful for studying the details of subsurface geometry and structure. Distinguishing among the various models is best accomplished by making geodetic measurements not only near the fault but out to distances equal to several times the fault depth. This is where the model differences are greatest; these differences will be most readily detected shortly after an earthquake when viscoelastic effects are most pronounced.
The greenschist to amphibolite facies tonalite-greenstone terrain of the Gods Lake subprovince grades - in a northwesterly direction - into the granulite facies Pikwitonei domain at the western margins of the Superior Province. The transition is the result of prograde metamorphism and takes place over 50 - 100 km without any structural or lithological breaks. Locally the orthopyroxene isograd is oblique to the structural grain and transects greenstone belts, e.g., the Cross Lake belt. The greenstone belts in the granulite facies and adjacent lower grade domain consist mainly of mafic and (minor) ultramafic metavolcanics, and clastic and chemical metasedimentary rocks. Typical for the greenstone belts crossed by the orthopyroxene isograd are anorthositic gabbros and anorthosites, and plagiophyric mafic flows. The Pikwitonei granulite domain has been interpreted as to represent a lower crustal level which was uplifted to the present level of erosion. On the basis of gravimetric data this uplift has been modelled as an obduction onto the Churchill Province during the Hudsonian orogeny, similar to the Ivrea Zone. The fault between the Churchill and Superior Province is described.
Research conducted for determining the location of stations for measuring crustal dynamics and predicting earthquakes is discussed. Procedural aspects, the extraregional kinematic tendencies, and regional tectonic deformation mechanisms are described.
Research activities performed on MAGSAT scalar data over South America, Central America, and the adjacent marine areas are summarized. The geologic utility of magnetic anomalies detected by satellite is demonstrated by focusing on the spherical-Earth interpretation of scalar MAGSAT data in combination with ancillary geological and geophysical data to obtain lithospheric models for these regions related to their contemporary crustal dynamics processes, geologic history, current volcanism seismicity and natural resources.
Scalar aeromagnetic data obtained during the U.S. Naval Oceanographic Office (NOO)-Vector Magnetic Survey of the conterminous United States were upward continued by equivalent point source inversion and compared with POGO satellite magnetic anomaly and preliminary scalar MAGSAT data. Initial comparisons indicate that the upward continued NOO data is dominated by long wavelength (approximately equal to 1000 to 3000 km) anomalies which are not present in the satellite anomaly data. Thus, the comparison of the data sets is poor. Several possible sources for these differences are present in the data analysis chain. However, upon removal of these long wavelengths from the upward continued NOO data, a close comparison observed between the anomalies verifies that satellite magnetic anomaly data do portray the crustal component within a range of wavelengths from roughly 1000 km down to the resolution limit of the observations.
The magnetic mineralogy and magnetic properties of the deep crust are studied as they pertain to the interpretation of long wavelength, or regional, crustal magnetic anomalies in satellite magnetic data and near surface magnetic data. The conclusions have relevance to the understanding of regional magnetic anomalies in magnetic field measuring satellite missions data. There are two separable studies: (1) a synthesis of available information of regional magnetic anomalies and the magnetization of metamorphic and igneous rocks, and (2) a detailed field, analytical, and experimental study of in situ and laboratory specimens from a terrain that offers exposures of high grade granlite facies rocks that have associated regional magnetic and gravity anomalies.
As determined by satellite laser ranging the rate of contraction of a 900 kilometer baseline between sites located near Quincy in northern California and San Diego in southern California is about 61 to 65 mm/yr with a formal uncertainty of about 10 mm/yr. The measured changes in baseline length are a manifestation of the relative motion between the North America and Pacific tectonic plates. This long baseline result is compared to measurements made by more conventional means on shorter baselines. Additional information based on seismicity, geology, and theoretical modelling is also analyzed. Deformation lying within a few tens of kilometers about the major faults in southern California accounts for most, but not all of the observed motion. Further motion is attributable to a broader scale deformation in southern California. Data suggesting crustal movements north of the Garlock fault, in and near the southern Sierra Nevada and local motion at an observatory are also critically reviewed. The best estimates of overall motion indicated by ground observations lie between 40 and 60 mm/yr. This lies within one or two standard deviations of that deduced by satellite ranging but the possibility of some unresolved deficit cannot be dismissed. The long time scale RM2 plate tectonic model of Minster and Jordan predicts a contraction between 47 and 53 mm/yr depending on the extension rate of the Basin and Range. Thus the ground based observations, satellite laser ranging (SLR) results, and RM2 rates differ at about the 10 mm/yr level and are consistent with one another within the data and model uncertainties.
Three possible estimation algorithms are presented for the monitoring of crustal deformations from a combination of repeated baseline measurements and prior deformation information. Attention is given to best linear minimum bias estimation, best linear estimation, and Bayesian estimation. The application of the deformation estimators to the maintenance of a conventional terrestrial reference system is considered. It is shown that if no prior deformation model is available, the free adjustment is the preferred algorithm. In the presence of prior information, however, it is better to use a somewhat incorrect model than to ignore it altogether. The best estimation model of the ones tested is the best linear estimation.
The progress of the NASA Crustal Dynamics Project is summarized. The Project is performed to measure regional deformation and strain accumulation due to large earthquakes in the plate boundary region of western N. America, to measure relative plate motions around the globe, to measure internal deformations of continental and oceanic lithospheric plates, to relate the rotational dynamics of the earth to earthquakes, plate motions and other geophysical phenomena and to measure regional fault motions and strain accumulation globally. VLBI and satellite laser ranging (SLR) have been employed using several base and mobile stations in N. America, Europe, S. America and the S. Pacific. Satellite data are being gathered with the LAGEOS spacecraft. Measurement campaigns in S. America and the Carribbean and Mediterranean regions will be carried out with new instrumentation in 1985.
Technical specifications, performance, and applications of the NASA transportable laser ranging systems (TLRS-1 and -2) for use in the Crustal Dynamics Program are described. TLRS-1 is truck-mounted, with the laser deployed through the roof. Interacting with the LAGEOS satellite, TLRS has a photoelectric receiver for gathering data on the roundtrip time of the laser beam for calculations of the range gate. The laser has a 0.1 nsec pulse at 3.5 mJ/pulse. Range is measured to within an error of 9 cm. The TLRS-2 version is configured for ease of air transport and modular breakdown and assembly. It has been activated on Easter Island. TLRS-3 and -4 are in development to serve as mobile units in South America and the Mediterranean area.
The crustal deformation patterns associated with the earthquake cycle can depend strongly on the rheological properties of subcrustal material. Substantial deviations from the simple patterns for a uniformly elastic earth are expected when viscoelastic flow of subcrustal material is considered. The detailed description of the deformation pattern and in particular the surface displacements, displacement rates, strains, and strain rates depend on the structure and geometry of the material near the seismogenic zone. The origin of some of these differences are resolved by analyzing several different linear viscoelastic models with a common finite element computational technique. The models involve strike-slip faulting and include a thin channel asthenosphere model, a model with a varying thickness lithosphere, and a model with a viscoelastic inclusion below the brittle slip plane. The calculations reveal that the surface deformation pattern is most sensitive to the rheology of the material that lies below the slip plane in a volume whose extent is a few times the fault depth. If this material is viscoelastic, the surface deformation pattern resembles that of an elastic layer lying over a viscoelastic half-space. When the thickness or breath of the viscoelastic material is less than a few times the fault depth, then the surface deformation pattern is altered and geodetic measurements are potentially useful for studying the details of subsurface geometry and structure. Distinguishing among the various models is best accomplished by making geodetic measurements not only near the fault but out to distances equal to several times the fault depth. This is where the model differences are greatest; these differences will be most readily detected shortly after an earthquake when viscoelastic effects are most pronounced.
Progress is reported in producing maps of Australia showing; crustal magnetic anomalies at constant elevation; bulk surface magnetization; and the geomagnetic field intensity, inclination and declination for the Australian region from global models of the geomagnetic field derived from MAGSAT data. The development of a data base management system is also considered.
The 2 deg averaged data set was analyzed and filtered to produce a magnetic anomaly map of the Australian continental region. The map was overlain on a tectonic map of Australia and correlations were made. A data set was selected that is dominated by relatively low elevation profiles with small changes of elevation within the Australian area in an effort to maximize the crustal anomaly field signal and reduce the effect of variation in satellite elevation. Support systems, both hardware and software are described and best-worst case errors encountered during processing of MAGSAT investigator tapes are summarized. The Broken Ridge anomaly was studied for model development purposes.
On the Colorado Plateau-Basin and Range transition in Arizona and New Mexico, basaltic volcanism takes two physiographic forms: (1) Major central composite volcanoes (e.g., San Francisco Peaks) in which basaltic magma differentiates at shallow crustal levels to siliceous and members and (2) large numbers of small cinder cones and a few domes that result from numerous discrete magma batches which apparently had little opportunity for differentiation. This study represents the first look at the petrogenesis of Plateau-bounding volcanic fields, based on rigorous stratigraphic controls, in combination with major and trace-element constraints. The emerging pattern of large volcanic constructs associated with shallow fractional crystallization, and numerous cinder cones associated with limited or no shallow differentiation may provide an analogue for interpreting petrogenetic patterns and/or tectonic settings on Mars.