Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “circular data”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Final Report on Development of Microwave Resonant Cavity Transducer for Fluid Flow Sensing: Development of Microwave Cavity Flow Meter for Advanced Reactor High Temperature Fluids

We are investigating a microwave resonant cavity transducer for flow sensing in the vessel of a high temperature fluid advanced reactor (AR), such as a molten salt cooled reactor (MSCR) or a sodium fast reactor (SFR). This transducer is a hollow metallic cylindrical cavity, with one of the flat walls of the cylinder flexible enough to undergo microscopic deflection due to dynamic fluid pressure. Membrane deflection leads to a shift in the microwave resonant frequency, which can be detected with a spectrum analyzer. We have developed a continuum electromechanics model of the microwave resonant cavity transducer performance. The deflection of the membrane is calculated using equations from the theory of plates and shells for deflection of radially constrained thin circular disk under uniform load. The microwave frequency shift is calculated using the equations from the microwave cavity perturbation theory. The transducer model was validated with proof-of-concept experimental data of water flow sensing with a Brass 360 right circular cylinder with 22.2mm diameter and 203µm thick wall. The cavity was excited through a subwavelength hole in TE 011 mode with resonant frequency f ≈ 17.8GHz. Subsequently, we have performed a preliminary proof-of-principle test of flow sensing in high temperature liquid sodium in environment. For this test, we have developed a cylindrical resonator with the same dimensions as for the Brass 360 cavity. The resonator for high temperature liquid sodium test was machined from stainless steel 316 and electroplated with silver on the interior surfaces. We have also developed and insertion probe consisting of a 50cm WR-42 brass waveguide enclosed in a protective SS316 tube. The cavity was excited through a subwavelength hole on the side of the wall of the cylinder in the TE 011 mode with resonant frequency f ≈ 17.8GHz. The liquid sodium setup consists of a cylindrical vessel with a center feed line, where a transducer inserted through the top cap of the vessel measures velocity of the impinging liquid jet. The sodium flow sensing study was performed in a liquid sodium vessel at 340°C temperature and ambient pressure. The flow rate was changed by varying sodium pump power, and a frequency shift of several hundred kHz was observed. The transducer was removed after 70 days of testing. No visual damage was observed, and the electromagnetic response remained the same. As a calibration experiment, we have assembled a water vessel with a center feed, and with dimensions similar to those of the liquid sodium setup. Water flow sensing was performed before and after liquid sodium test. The responses in both cases are similar and agree with COMSOL computer simulations. Because long-term (multi-year) experimental tests of transducer resilience to harsh environment are not practical, we have developed a probabilistic model of creep to estimate transducer resilience to the harsh environment. The probabilistic model considers diffusion creep under the condition of high temperature and low stress, where the stress and temperature are allowed to be random variables with Gaussian distributions. Using the probabilistic model, we estimate inelastic membrane deflections due to creep for several temperature ranges. We conclude that for temperatures less than 650°C, creep has negligible long-term effect on the transducer performance.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
NASA NTRS1980

An improved prediction method for the noise generated in flight by circular jets

A semi-empirical model for predicting the noise generated by jets exhausting from circular nozzles is presented and compared with small-scale static and simulated-flight data. The present method is an updated version of that part of the original NASA aircraft noise prediction program relating to circular jet noise. The earlier method agreed reasonably well with experimental static and flight data for jet velocities up to approximately 520 m/sec. The poorer agreement at higher jet velocities appeared to be due primarily to the manner in which supersonic convection effects were formulated. The purely empirical supersonic convection formulation is replaced in the present method by one based on theoretical considerations. Other improvements of an empirical nature were included based on model-jet/free-jet simulated-flight tests. The effects of nozzle size, jet velocity, jet temperature, and flight are included.

Stone, J. R.↗
NASA NTRS2003

Buried and Visible Impact Basin Distribution on Mars: Comparison with Magnetization, Gravity and Crustal Thickness Models

The large population of buried impact basins found in MOLA elevation data on Mars provides compelling evidence for a pre-Noachian crust below the oldest visible Early Noachian surface units, and lowland crust below the younger plains that is Early Noachian in age, older than much of the visible highlands, but not as old as the buried pre-Noachian highlands. The large (D greater than 200 km) buried basins are suggested by Quasi-Circular Depressions (QCDs) that are not apparent in image data, and include features up to 3000 lun diameter in both the lowlands (Utopia) and highlands (a newly found "Ares Basin"). There are about a dozen QCDs larger than 1000 km diameter. We have placed these large features in a relative age sequence based on superimposed smaller QCD. Only the youngest and most obvious of these (Hellas, Argyre, Isidis) lack magnetic anomalies within their main rings. These all have an N(200) cumulative crater density of less than 2.5. Somewhat older lowland-making basins (Utopia, Chryse, Acidalia) with an N(200) age of approximately 3.0, have weak magnetic anomalies, and the oldest, most subdued basins (including Ares) with N(200) greater than 3.5 have many strong magnetic anomalies within their main ring. These older basins likely formed before the main magnetic field died. We have compared our inventory of large QCDs with the distribution of gravity anomalies and with a crustal thickness model which shows many roughly circular areas of thinner crust completely or partly surrounded by narrow regions of thicker crust. These have the structure expected for impact basins, and many of them do correspond to the visible or buried QCDs we previously identified. But there are cases where the crustal thickness feature is offset from the QCD found in topography alone, and there are also several, sometimes large examples of such features which do not coincide with QCDs previously identified. For example, we find several likely buried basins revealed in the crustal thickness data in the Arcadia and Amazonis regions which we did not previously identify, including several features in the 600-1200 km diameter range.

Frey, Herbert↗
DOE OSTI2024

Measuring Economy-Wide Circularity of the United States: An Input-Output Model in Mass Units

The ideal of creating closed material cycles by transforming the way we make, use and repurpose goods has become known as the circular economy. Besides its visionary appeal, material efficiency strategies central to circular economy can allow us to meet decarbonization goals that are otherwise out of reach. Production of basic materials such as cement, iron and steel and petrochemicals is one of the largest drivers of greenhouse gas emissions. Measuring circularity, and understanding its relationship with other sustainability metrics, however, is still difficult due to lack of data in mass units covering the entire economic system. Input-output (I-O) tables were originally created as a means of tracking the monetary flows that represent exchanges of goods and services within an economy, but have found additional uses in life cycle assessment and material flow accounts. In the traditional approach of environmentally extended I-O tables, emissions and energy data augment monetary flows. This approach can lead to price effects that distort physical quantities. Also, circular economy strategies and their goals relate to mass, not monetary flows. Therefore, it is best to simulate them using physical quantities. With these issues in mind, we have developed I-O tables in mass units to measure the flow of goods in the U.S. economy. This allows us to better measure how circular the economy really is, and how policy changes to affect this circularity may also affect decarbonization goals. Improving knowledge of these linkages could allow manufacturers to make changes in their production to achieve their sustainability and decarbonization targets. Our tool also provides a standard approach and public repository for data in physical units, making such data more available, useful, and meaningful. Following an established set of material flow metrics used by the European Union, we have used our tool to calculate material footprints over time differentiated by oil and gas versus other extractive industries. This approach also shows the relative trade balances of the U.S. in materials. We have developed a case study for the iron and steel sector, showing how different decarbonization scenarios affect not only economy-wide greenhouse gas emissions, but also total material use.

circular economy↗
NASA NTRS1944

Design of power-plant installations pressure-loss characteristics of duct components

A correlation of what are believed to be the most reliable data available on duct components of aircraft power-plant installations is presented. The information is given in a convenient form and is offered as an aid in designing duct systems and, subject to certain qualifications, as a guide in estimating their performance. The design and performance data include those for straight ducts; simple bends of square, circular, and elliptical cross sections; compound bends; diverging and converging bends; vaned bends; diffusers; branch ducts; internal inlets; and an angular placement of heat exchangers. Examples are included to illustrate methods of applying these data in analyzing duct systems. (author)

Henry, John R↗
NASA NTRS1984

Tabulations of ambient ozone data obtained by GASP (Global Air Sampling Program) airliners, March 1975 to July 1979

Tabulations are given of GASP ambient ozone mean, standard deviation, median, 84th percentile, and 98th percentile values, by month, flight level, and geographical region. These data are tabulated to conform to the temporal and spatial resolution required by FAA Advisory Circular 120-38 (monthly by 2000 ft in altitude by 5 deg in latitude) for climatological data used to show compliance with cabin ozone regulations. In addition seasonal x 10 deg latitude tabulations are included which are directly comparable to and supersede the interim GASP ambient ozone tabulations given in appendix B of FAA-EE-80-43 (NASA TM-81528). Selected probability variations are highlighted to illustrate the spatial and temporal variability of ambient ozone and to compare results from the coarse and fine grid analyses.

Jasperson, W. H.↗
NASA NTRS1988

Interplanetary protons (Ep of about 1 MeV) 1973-1986 and out to 22.4 AU

This paper uses annual mean counting rate data from detectors on two long-lived spacecraft, Pioneer 11 and IMP 8, to study the temporal and heliocentric radial distance variations of the intensity of interplanetary protons (Ep of about 1 MeV) over solar activity cycle 21. The Pioneer 11 data cover the time period April 1973 through 1986 and the heliocentric radial distance range r of between 1.0 and 2.4 AU. IMP 8, in an approximately circular geocentric orbit of semimajor axis 35 earth radii, provides comparable data at 1 AU over the time period 1974-1986. The combination of the two bodies of data shows that the annual mean intensity of such protons varies as the inverse square of the distance from the sun, irrespective of solar activity as measured by the annual mean sunspot number S. Also it is found that the annual intensity at 1 AU is approximately proportional to S, except for anomalously low values in 1979 and 1980, and that the product of the annual mean intensity at Pioneer 11 by r-squared is also approximately proportional to S, except for anomalously low values in 1979, 1980 (in particular), and 1981. The common 1980 'anomaly' is attributed to gross changes in interplanetary conditions associated with the reversal of the polarity of the sun's polar magnetic field.

Van Allen, J. A.↗
NASA NTRS1973

Forward velocity effects on jet noise with dominant internal noise source

Acoustic data, with and without forward velocity, were obtained with a circular nozzle using a quiet flow system and one dominated by a low frequency internal noise source (analogous to combustion noise). Forward velocity effects were obtained by installing the test nozzle in a free jet. Farfield noise data were obtained at jet pressure ratios from 1.3 to 1.7 and forward velocities up to 260 ft/sec. With a quiet flow system, jet noise is reduced by forward velocity. With a dominant low frequency core noise source, the portion of the noise spectra dominated by this source was not appreciably affected by forward velocity.

Vonglahn, U. H.↗
NASA NTRS1945

Heat-transfer coefficients for air flowing in round tubes, in rectangular ducts, and around finned cylinders

Report reviews published data and presents some new data on heat transfer to air flowing in round tubes, in rectangular ducts, and around finned cylinders. The available data for heat transfer to air in straight ducts of rectangular and circular cross section have been correlated in plots of Stanton number versus Reynolds number to provide a background for the study of the data for finned cylinders. Equations are recommended for both the streamlined and turbulent regions, and data are presented for the transition region between turbulent and laminar flow. Use of hexagonal ends on round tubes causes the characteristics of laminar flow to extend to high Reynolds numbers. Average coefficients for the entire finned cylinder have been calculated from the average temperature at the base of the fins and an equation which was derived to allow for the effectiveness of the fins. The available results for each finned cylinder are correlated herein in terms of graphs of Stanton number versus Reynolds number. In general, for a given Reynolds number, the Stanton number increases with increases in both spacing and width of the fins, and is apparently independent of cylinder diameter and temperature difference. For a given coefficient of heat transfer improved baffles and rough or wavy surfaces give a substantial reduction in pumping power per unit of heat transfer surface and a somewhat smaller decrease in pressure drop. (author)

Drexel, Rober E↗
NASA NTRS1980

Mission analysis data for inclined geosynchronous orbits, part 1

Data needed for preliminary design of inclined geosynchronous missions are provided. The inertial and Earth fixed coordinate systems are described, as well as orbit parameters and elements. The complete family of geosynchronous orbits is discussed. It is shown that circular inclined geosynchronous orbits comprise only one set in this family. The major orbit perturbation and their separate effects on the geosynchronous orbit are discussed. Detailed information on the orbit perturbation of inclined circular geosynchronous orbits is given, with emphasis on time history data of certain orbital elements. Orbit maintenance delta velocity (V) requirements to counteract the major orbit perturbations are determined in order to provide order of magnitude estimates and to show the effects of orbit inclination on delta V. Some of the considerations in mission design for a multisatellite system, such as a halo orbit constellation, are discussed.

Graf, O. F., Jr.↗
DOE OSTI2022

Information content of and the ability to reconstruct dichroic X-ray tomography and laminography

Dichroic tomography is a 3D imaging technique in which the polarization of the incident beam is used to induce contrast due to the magnetization or orientation of a sample. The aim is to reconstruct not only the optical density but the dichroism of the sample. The theory of dichroic tomographic and laminographic imaging in the parallel-beam case is discussed as well as the problem of reconstruction of the sample’s optical properties. The set of projections resulting from a single tomographic/laminographic measurement is not sufficient to reconstruct the magnetic moment for magnetic circular dichroism unless additional constraints are applied or data are taken at two or more tilt angles. For linear dichroism, three polarizations at a common tilt angle are insufficient for unconstrained reconstruction. However, if one of the measurements is done at a different tilt angle than the other, or the measurements are done at a common polarization but at three distinct tilt angles, then there is enough information to reconstruct without constraints. Possible means of applying constraints are discussed. Furthermore, it is shown that for linear dichroism, the basic assumption that the absorption through a ray path is the integral of the absorption coefficient, defined on the volume of the sample, along the ray path, is not correct when dichroism or birefringence is strong. This assumption is fundamental to tomographic methods. An iterative algorithm for reconstruction of linear dichroism is demonstrated on simulated data.

Marcus, Matthew A. (ORCID:0000000325277586)↗
NASA NTRS1973

Forward velocity effects on jet noise with dominant internal noise source

Acoustic data, with and without forward velocity, were obtained with a circular nozzle using a quiet flow system and one dominated by a low-frequency internal noise source (analogous to combustion noise). Forward velocity effects were obtained by installing the test nozzle in a free jet. Far-field noise data were obtained at jet pressure ratios from 1.3 to 1.7 and forward velocities up to 260 ft/sec. With a quiet flow system, jet noise is reduced by forward velocity. With a dominant low-frequency core noise source, the portion of the noise spectra dominated by this source was not appreciably affected by forward velocity.

Von Glahn, U.↗
NASA NTRS1984

Navier-Stokes solutions for two-dimensional subsonic base flow

Methods for determining the effects of mass injection from the trailing edge of a bluff body at low speeds and in transonic flow were numerically studied along with an unmodified blunt-based body to gain insight into the effects of vortex shedding on the base drag. The methodology used to obtain finite-difference solutions to the Navier-Stokes equations for subsonic compressible two-dimensional near-wake flows is presented. The effectiveness of an introduced outflow boundary condition which minimizes reflections back into the computational domain was demonstrated with the solution of a model vortex problem. Calculations of the near-wake flow past a circular cylinder were in excellent agreement with experimental data. Laminar-flow solutions for a blunt-based model with and without a base cavity and with mass injection into the wake agreed qualitatively with experimental observations. The drag reduction capability provided by such base modifications was demonstrated.

Rudy, D. H.↗
NASA NTRS1985

The PIX-2 experiment: An overview

The second Plasma Interactions Experiment (PIX-2) was launched in January 1983 as a piggyback on the second stage of the Delta launch vehicle that carried IRAS into orbit. Placed in a 870 km circular polar orbit, it returned 18 hrs of data on the plasma current collection and arcing behavior of solar arrays biased to +/-1000 V in steps. The four 500 sq cm solar array segments were biased singly and in combinations. In addition to the array segments PIX-2 carried a Sun sensor, a Langmuir probe to measure electron currents, and a hot-wire filament electron emitter to control vehicle potential during positive array bias sequences. The PIX-2 experiment is reviewed from program and operational perspectives.

Purvis, C. K.↗
NASA NTRS1994

DET/MPS - The GSFC Energy Balance Programs

Direct Energy Transfer (DET) and MultiMission Spacecraft Modular Power System (MPS) computer programs perform mathematical modeling and simulation to aid in design and analysis of DET and MPS spacecraft power system performance in order to determine energy balance of subsystem. DET spacecraft power system feeds output of solar photovoltaic array and nickel cadmium batteries directly to spacecraft bus. MPS system, Standard Power Regulator Unit (SPRU) utilized to operate array at array's peak power point. DET and MPS perform minute-by-minute simulation of performance of power system. Results of simulation focus mainly on output of solar array and characteristics of batteries. Both packages limited in terms of orbital mechanics, they have sufficient capability to calculate data on eclipses and performance of arrays for circular or near-circular orbits. DET and MPS written in FORTRAN-77 with some VAX FORTRAN-type extensions. Both available in three versions: GSC-13374, for DEC VAX-series computers running VMS. GSC-13443, for UNIX-based computers. GSC-13444, for Apple Macintosh computers.

Jagielski, J. M.↗
NASA NTRS1999

Application of the RNS3D Code to a Circular-Rectangular Transition Duct With and Without Inlet Swirl and Comparison with Experiments

Circular-rectangular transition ducts are used between engine exhausts and nozzles with rectangular cross sections that are designed for high performance aircraft. NASA Glenn Research Center has made experimental investigations of a series of circular-rectangular transition ducts to provide benchmark flow data for comparison with numerical calculations. These ducts are all designed with superellipse cross sections to facilitate grid generation. In response to this challenge, the three-dimensional RNS3D code has been applied to one of these transition ducts. This particular duct has a length-to-inlet diameter ratio of 1.5 and an exit-plane aspect ratio of 3.0. The inlet Mach number is 0.35. Two GRC experiments and the code were run for this duct without inlet swirl. One GRC experiment and the code were also run with inlet swirl. With no inlet swirl the code was successful in predicting pressures and secondary flow conditions, including a pair of counter-rotating vortices at both sidewalls of the exit plane. All these phenomena have been reported from the two GRC experiments. However, these vortices were suppressed in the one experiment when inlet swirl was used; whereas the RNS3D code still predicted them. The experiment was unable to provide data near the sidewalls, the very region where the vortices were predicted.

Cavicchi, Richard H.↗
NASA NTRS2011

Initial Results from the Miniature Imager for Neutral Ionospheric Atoms and Magnetospheric Electrons (MINI-ME) on the FASTSAT Spacecraft

The MINI-ME instrument is a collaborative effort between NASA's Goddard Space Flight Center (GSFC) and the U.S. Naval Academy, funded solely through GSFC Internal Research and Development (IRAD) awards. It detects neutral atoms from about 10 eV to about 700 eV (in 30 energy steps) in its current operating configuration with an approximately 10 degree by 360 degree field-of-view, divided into six sectors. The instrument was delivered on August 3, 2009 to Marshall Space Flight Center (MSFC) for integration with the FASTSAT-HSV01 small spacecraft bus developed by MSFC and a commercial partner, one of six Space Experiment Review Board (SERB) experiments on FASTSAT and one of three GSFC instruments (PISA and TTI being the other two). The FASTSAT spacecraft was launched on November 21, 2010 from Kodiak, Alaska on a Minotaur IV as a secondary payload and inserted into a 650 km, 72 degree inclination orbit, very nearly circular. MINI-ME has been collecting science data, as spacecraft resources would permit, in "optimal science mode" since January 20, 2011. In this presentation, we report initial science results including the potential first observations of neutral molecular ionospheric outflow. At the time of this abstract, we have identified 15 possible molecular outflow events. All these events occur between about 65 and 82 degrees geomagnetic latitude and most map to the auroral oval. The MINI-ME results provide an excellent framework for interpretation of the MILENA data, two instruments almost identical to MINI-ME that will launch on the VISIONS suborbital mission

Collier, Michael R.↗
NASA NTRS2016

Flat Plate Wake Velocity Statistics Obtained With Circular And Elliptic Trailing Edges

The near wake of a flat plate with circular and elliptic trailing edges is investigated with data from direct numerical simulations. The plate length and thickness are the same in both cases. The separating boundary layers are turbulent and statistically identical. Therefore the wake is symmetric in the two cases. The emphasis in this study is on a comparison of the wake-distributions of velocity components, normal intensity and fluctuating shear stress obtained in the two cases.

CFD↗