Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ceramic processing”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14
All sourcesNASA NTRSDOE OSTI
NASA NTRS1985

Gel Precursors as Glass and Ceramic Starting Materials for Space Processing Applications Research

The crystallization kinetics and glass forming ability of reluctant glass formers is investigated. This could ultimately aid the formation of bulk samples of unique glass compositions outside of normal glass forming regions allowing the optimization of certain properties of the glass. One important aspect of processing in space is the containerless undercooling of molten substances. Theoretically, the extent of undercooling can be greatly enhanced by solidifying in the absence of heterogeneous nucleation resulting from contact with crucibles or molds. Techniques were established for the measurement of crystallization kinetics and critical cooling rates. The glass formation ability and crystallization kinetics of Ga2O-43CaO and several Al2O3-CaO compositions were measured. An apparatus was set up to measure the temperature of spherical samples on a thermocouple at large cooling rates. The time and temperature of nucleation is recorded and the probability of nucleation at various cooling rates can be measured.

Downs, R. L.↗
NASA NTRS1986

Sliding Seal Materials for Adiabatic Engines, Phase 2

An essential task in the development of the heavy-duty adiabatic diesel engine is identification and improvements of reliable, low-friction piston seal materials. In the present study, the sliding friction coefficients and wear rates of promising carbide, oxide, and nitride materials were measured under temperature, environmental, velocity, and loading conditions that are representative of the adiabatic engine environment. In addition, silicon nitride and partially stabilized zirconia disks were ion implanted with TiNi, Ni, Co, and Cr, and subsequently run against carbide pins, with the objective of producing reduced friction via solid lubrication at elevated temperature. In order to provide guidance needed to improve materials for this application, the program stressed fundamental understanding of the mechanisms involved in friction and wear. Electron microscopy was used to elucidate the micromechanisms of wear following wear testing, and Auger electron spectroscopy was used to evaluate interface/environment interactions which seemed to be important in the friction and wear process. Unmodified ceramic sliding couples were characterized at all temperatures by friction coefficients of 0.24 and above. The coefficient at 800 C in an oxidizing environment was reduced to below 0.1, for certain material combinations, by the ion implanation of TiNi or Co. This beneficial effect was found to derive from lubricious Ti, Ni, and Co oxides.

Lankford, J.↗
NASA NTRS1987

Nondestructive evaluation of structural ceramics by photoacoustic microscopy

A photoacoustic microscopy (PAM) digital imaging system was developed and utilized to characterize silicon nitride material at the various stages of the ceramic fabrication process. Correlation studies revealed that photoacoustic microscopy detected failure initiating defects in substantially more specimens than microradiography and ultrasonic techniques. Photoacoustic microscopy detected 10 to 100 micron size surface and subsurface pores and inclusions, respectively, up to 80 microns below the interrogating surface in machined sintered silicon nitride. Microradiography detected 50 micron diameter fracture controlling pores and inclusions. Subsurface holes were detected up to a depth of 570 microns and 1.00 mm in sintered silicon nitride and silicon carbide, respectively. Seeded voids of 20 to 30 micron diameters at the surface and 50 microns below the interrogating surface were detected by photoacoustic microscopy and microradiography with 1 percent X-ray thickness sensitivity. Tight surface cracks of 96 micron length x 48 micron depth were detected by photoacoustic microscopy. PAM volatilized and removed material in the green state which resulted in linear shallow microcracks after sintering. This significantly limits the use of PAM as an in-process NDE technique.

Khandelwal, Pramod K.↗
NASA NTRS1992

Advanced ceramic matrix composites for TPS

Recent advances in ceramic matrix composite (CMC) technology provide considerable opportunity for application to future aircraft thermal protection system (TPS), providing materials with higher temperature capability, lower weight, and higher strength and stiffness than traditional materials. The Thermal Protection Material Branch at NASA Ames Research Center has been making significant progress in the development, characterization, and entry simulation (arc-jet) testing of new CMC's. This protection gives a general overview of the Ames Thermal Protection Materials Branch research activities, followed by more detailed descriptions of recent advances in very-high temperature Zr and Hf based ceramics, high temperature, high strength SiC matrix composites, and some activities in polymer precursors and ceramic coating processing. The presentation closes with a brief comparison of maximum heat flux capabilities of advanced TPS materials.

Rasky, Daniel J.↗
NASA NTRS1995

PVD TBC experience on GE aircraft engines

The higher performance levels of modern gas turbine engines present significant challenges in the reliability of materials in the turbine. The increased engine temperatures required to achieve the higher performance levels reduce the strength of the materials used in the turbine sections of the engine. Various forms of Thermal Barrier Coatings (TBC's) have been used for many years to increase the reliability of gas turbine engine components. Recent experience with the Physical Vapor Deposition (PVD) process using ceramic material has demonstrated success in extending the service life of turbine blades and nozzles. Engine test results of turbine components with a 125 micrometer (0.005 in) PVD TBC have demonstrated component operating temperatures of 56-83 C (100-150 F) lower than uncoated components. Engine testing has also revealed the TBC is susceptible to high angle particle impact damage. Sand particles and other engine debris impact the TBC surface at the leading edge of airfoils and fracture the PVD columns. As the impacting continues the TBC erodes away in local areas. Analysis of the eroded areas has shown a slight increase in temperature over a fully coated area, however, a significant temperature reduction was realized over an airfoil without any TBC.

Bartz, A.↗
NASA NTRS1995

PVD TBC experience on GE aircraft engines

The higher performance levels of modern gas turbine engines present significant challenges in the reliability of materials in the turbine. The increased engine temperatures required to achieve the higher performance levels reduce the strength of the materials used in the turbine sections of the engine. Various forms of thermal barrier coatings (TBC's) have been used for many years to increase the reliability of gas turbine engine components. Recent experience with the physical vapor deposition (PVD) process using ceramic material has demonstrated success in extending the service life of turbine blades and nozzles. Engine test results of turbine components with a 125 micron (0.005 in) PVD TBC have demonstrated component operating temperatures of 56-83 C (100-150 F) lower than non-PVD TBC components. Engine testing has also revealed the TBC is susceptible to high angle particle impact damage. Sand particles and other engine debris impact the TBC surface at the leading edge of airfoils and fracture the PVD columns. As the impacting continues, the TBC erodes away in local areas. Analysis of the eroded areas has shown a slight increase in temperature over a fully coated area, however a significant temperature reduction was realized over an airfoil without TBC.

Antonio Maricocchi↗
NASA NTRS1999

Spinoff 1999

A survey is presented of NASA-developed technologies and systems that were reaching commercial application in the course of 1999. Attention is given to the contributions of each major NASA Research Center. Representative 'spinoff' technologies include the predictive AI engine monitoring system EMPAS, the GPS-based Wide Area Augmentation System for aircraft navigation, a CMOS-Active Pixel Sensor camera-on-a-chip, a marine spectroradiometer, portable fuel cells, hyperspectral camera technology, and a rapid-prototyping process for ceramic components.

JET PROPULSION LABORATORY↗
NASA NTRS2001

Rare-Earth Oxide (Yb2O3) Selective Emitter Fabrication and Evaluation

This investigation involved the fabrication and evaluation of rare-earth oxide selective emitters. The first goal of this study was to successfully fabricate the selective emitter samples using paper and ceramic materials processing techniques. The resulting microstructure was also analyzed using a Scanning Electron Microscope. All selective emitter samples fabricated for this study were made with ytterbium oxide (Yb2O3). The second goal of this study involved the measurement of the spectral emission and the radiated power of all the selective emitter samples. The final goal of this study involved the direct comparison of the radiated power emitted by the selective emitter samples to that of a standard blackbody at the same temperature and within the same wavelength range.

Jennette, Bryan↗
NASA NTRS2003

Reactive Processing of Environmentally Conscious, Biomorphic Ceramics from Natural Wood Precursors

Environmentally conscious, biomorphic ceramics (Ecoceramics) are a new class of materials that are manufactured from renewable resources and wastes. In this study, silicon carbide and oxide-based biomorphic ceramics have been fabricated from pine and jelutong wood precursors. A carbonaceous preform is produced through wood pyrolysis and subsequent infiltration with oxides (ZrO2 sols) and liquid silicon to form ceramics. These biomorphic ceramics show a wide variety of microstructures, densities, and hardness behavior that are determined by the type of wood and infiltrants selected.

Singh, M.↗
NASA NTRS2002

Reactive Processing of Environment Conscious, Biomorphic Ceramics: A Novel and Eco-friendly Route to Advanced Ceramic

Environment-conscious, biomorphic ceramics (Ecoceramics) are a new class of materials that can be produced with renewable resources (wood) and wood wastes (wood sawdust). These materials have tailorable properties with numerous potential applications. Silicon carbide-based ecoceramics have been fabricated by the infiltration of wood-derived carbonaceous preforms with oxide and silicon based materials. The wood-derived carbonaceous preforms have been shown to be quite useful in producing porous or dense materials with different microstructures and compositions. The microstructure and mechanical properties (flexural strength, fracture toughness, elastic modulus, and compressive strength) of a wide variety of Sic-based ecoceramics have been measured. Ecoceramics have tailorable properties and behave like ceramic materials manufactured by conventional approaches. In this presentation the fabrication approach, microstructure, and thermomechanical properties of a wide variety of Sic-based Ecoceramics will be reported.

Singh, M.↗
NASA NTRS1988

NASA Tech Briefs, December 1988

This month's technical section includes forecasts for 1989 and beyond by NASA experts in the following fields: Integrated Circuits; Communications; Computational Fluid Dynamics; Ceramics; Image Processing; Sensors; Dynamic Power; Superconductivity; Artificial Intelligence; and Flow Cytometry. The quotes provide a brief overview of emerging trends, and describe inventions and innovations being developed by NASA, other government agencies, and private industry that could make a significant impact in coming years. A second bonus feature in this month's issue is the expanded subject index that begins on page 98. The index contains cross-referenced listings for all technical briefs appearing in NASA Tech Briefs during 1988.

Source record↗
NASA NTRS2019

Exceptional Thermal Properties of Polymer-Derived Ceramic Composites Reinforced with High Volume Fractions of Boron Nitride Nanotube at Elevated Temperature

We report for the first time the synthesis of boron nitride nanotube (BNNT) reinforced ceramic composites using the polymer derived ceramic (PDC) processing route. The nanocomposites had a BNNT loading of up to 35.4 vol.%. TGA results showed that the nanocomposites have good thermal stability up to 900 oC in air. BNNTs in the nanocomposites survived in an oxidizing environment up to 900 oC, revealing that the nanocomposites can be used for high temperature applications. Thermal conductivity of PDC reinforced with 35.4 vol.% BNNT was measured as 4.123 W/(m·K) at room temperature, which is a 2100 % increase compared to that of pristine PDC. The thermal conductivity value increases with the increase of BNNT content. A thermal conductivity percolation phenomenon appeared when the BNNT content increased to 36±5 vol.%. The results of this study showed that BNNTs could effectively improve the thermal conductivity of PDC materials. BNNT reinforced PDC could be used as thermal structural materials in a harsh environment at the temperature up to 900 deg C.

Yujun Jia↗
NASA NTRSDate not supplied

Developing Materials and Coating Technologies for Mitigation of Lunar Dust Adhesion and Abrasion

In order to support long duration missions on the Moon’s surface, materials resistant to the harsh lunar environment are critically needed. Lunar dust poses a major threat to the durability of components and vehicles due to its fine, jagged morphology and highly abrasive nature, enabling the particles to adhere and embed onto surfaces of components and devices and potentially leading to premature failure. There is significant effort within NASA to develop novel materials and coating technologies to mitigate lunar dust adhesion and abrasion. This effort has been exploring a variety of production routes and examining properties of candidate material systems, including ceramic, metallic and polymeric. Manufacturing methods investigated include ceramic powder processing, additive manufacturing and surface modification via laser ablation patterning of bulk materials and coatings. An overview of ongoing NASA materials and coating research and development efforts to enable lunar surface exploration will be presented.

Materials, Coatings, lunar dust mitigation↗
DOE OSTI2021

Process for manufacturing SiC composite ceramics

A method is described for manufacturing a ceramic composite structure. The method includes wrapping ceramic fibers (22), such as SiC fibers, about the external surface of at least one form. The method further includes heating the wrapped fibers (22) to a temperature no greater than a first temperature, infiltrating voids (24) in the wrapped fibers (22) with the ceramic composite in a first vessel (12) at the first temperature, transferring the infiltrated wrapped fibers (22) from the first vessel (12) to a second vessel (14), distinct from the first vessel (12), and coating the infiltrated wrapped fibers (22) with the ceramic composite in the second vessel (14) at a second temperature, higher than the first temperature.

Lahoda, Edward J.↗
DOE OSTI2016

Effect of carbon impurity during the sintering of MOX fuels

UO{sub 2} and PuO{sub 2} powders are currently used as raw materials for the industrial fabrication of mixed uranium plutonium oxide (MOX) for light-water reactors. The mixture is pelletized before being sintered at 1700 Celsius degrees under a reducing atmosphere of Ar/4%H{sub 2} with 1200 vpm H{sub 2}O. At the end of the oxide ceramic sintering process, a swelling phenomenon sometimes occurs and could be responsible for the fuel non-compliance with safety specifications. This phenomenon is often caused by the presence of carbon impurities in the raw materials. In this paper, it will be shown how carbon impurities (naturally present or deliberately introduced) in the raw materials affect MOX fuel densification by sintering. For that purpose, MOX densification has been monitored by dilatometric measurements and the gases released during sintering have been continuously qualitatively and quantitatively analyzed. Gases released or trapped in the fuel during densification have been studied, as well as the sintered fuel characteristics (density, microstructure, U/Pu distribution). Results confirm that carbon impurities can play a major role in the fuel swelling: the oxides react with carbon and form gaseous CO molecules that could be trapped in the closed pores during sintering. This leads to a pressure increase within pores responsible for an irreversible swelling by creep deformation. (authors)

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗