Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “cathode materials”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14
All sourcesNASA NTRSDOE OSTI
DOE OSTI2013

Electrochemical Kinetics and Performance of Layered Composite Cathode Material Li[Li0.2Ni0.2Mn0.6]O2

Lithium-rich, manganese-rich (LMR) layered composite cathode material Li[Li0.2Ni0.2Mn0.6]O2 has been successfully prepared by a co-precipitation method and its structure is confirmed by XRD characterization. The material delivers a high discharge capacity of 281 mAh g-1, when charged and discharged at a low current density of 10 mA g-1. However, significant increase of cell polarization and decrease of discharge capacity are observed at voltages below 3.5 V with increasing current densities. Galvanostatic intermittent titration technique (GITT) analysis demonstrates that lithium ion intercalation/de-intercalation reactions in this material are kinetically controlled by Li2MnO3 and its activated MnO2 component. The relationship between the electrochemical kinetics and rate performance as well as cycling stability has been systematically investigated. High discharge capacity of 149 mAh g-1 can be achieved at 10 C charge rate and C/10 discharge rate. The result demonstrates that the Li2MnO3 based material could withstand high charge rate (except initial activation process), which is very promising for practical applications. A lower discharge current density is preferred to overcome the kinetic barrier of lithium ion intercalation into MnO2 component, in order to achieve higher discharge capacity even at high charge rates.

Environmental Molecular Sciences Laboratory↗
DOE OSTI2023

Enabling Ambient Stability of LiNiO 2 Lithium-Ion Battery Cathode Materials via Graphene–Cellulose Composite Coatings

Nickel-rich layered oxides are widely used as cathode materials for energy-dense lithium-ion batteries. These chemistries, based on the parent compound LiNiO 2 (LNO), are highly sensitive to ambient environments and are known to readily react with moisture and carbon dioxide. As a result, impurities such as lithium hydroxides and lithium carbonates are formed at the LNO surface, compromising electrochemical behavior. Here, we address this issue by coating LNO cathode particles with a hydrophobic barrier layer composed of graphene and ethyl cellulose (GrEC). This coating limits contact between atmospheric moisture and the LNO surface, which minimizes the generation of lithium impurities. This scheme is evaluated by exposing coated LNO to humidified CO 2 for 24 h as an accelerated ambient degradation test. Subsequent spectroscopy, microscopy, and electrochemical characterization show no detectable signatures of carbonates on the LNO surface, thus verifying that the GrEC coating prevents ambient degradation. In conclusion, by demonstrating this methodology for the ultimate nickel-rich chemistry, this approach can likely be generalized to a wide range of ambient-sensitive battery materials.

25 ENERGY STORAGE↗
DOE OSTI2021

Stabilized Lithium, Manganese-Rich Layered Cathode Materials Enabled by Integrating Co-Doping and Nanocoating

While lithium, manganese-rich (LMR) layered oxide cathode materials offer high energy density (>900 Wh kg –1 ) and low cost, LMR is susceptible to continuous capacity and voltage decay from the oxygen migration and side reaction with aqueous electrolyte at high voltage. Herein, the integration of Na/F co-doping (CD) and AlF 3 coating on LMR is achieved without the need of complex atomic layer deposition. Akin to pristine and CD samples, CD with 1 wt % AlF 3 (CD-1.0 wt %) shows excellent electrochemical performance with the capacity and voltage retentions of 93 and 91% after 150 cycles at 0.5C, respectively, and increased ionic conductivity. Spectroscopic analysis indicates that the coating mainly influences the Co distribution, where Co is enriched on the surface, and partial diffusion of Al 3+ ions toward the bulk, leading to a slight change of transition-metal (TM) valence states at the nanometer scale and the formation of a stable Li x (CoAl)O y phase. Post-cycling analysis reveals that CD-1.0 wt % can alleviate the formation of rock-salt structure and Mn dissolution. Besides, little to no metal segregation is detected for the cycled CD-1.0 wt % sample. This finding presents the first instance to apply co-doping and AlF 3 coating as a new strategy to enhance the structural homogeneity and takes another step toward their commercial viability.

25 ENERGY STORAGE↗
DOE OSTI2023

Inhibiting collective cation migration in Li-rich cathode materials as a strategy to mitigate voltage hysteresis

Lithium-rich cathodes are promising energy storage materials due to their high energy densities. However, voltage hysteresis, which is generally associated with transition metal migration, limits their energy efficiency and implementation in practical devices. Here we reveal that voltage hysteresis is related to the collective migration of metal ions, and that isolating the migration events from each other by creating partial disorder can create high-capacity reversible cathode materials, even when migrating transition metal ions are present. In this study, we demonstrate this on a layered Li-rich chromium manganese oxide that in its fully ordered state displays a substantial voltage hysteresis (>2.5 V) associated with collective transition metal migration into Li layers, but can be made to achieve high capacity (>360 mAh g –1 ) and energy density (>1,100 Wh kg –1 ) when the collective migration is perturbed by partial disorder. This study demonstrates that partially cation-disordered cathode materials can accommodate a high level of transition metal migration, which broadens our options for redox couples to those of mobile cations.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Valence Effects of Fe Impurity for Recovered LiNi 0.6 Co 0.2 Mn 0.2 O 2 Cathode Materials

Iron impurities are generally included in the obtained leaching liquor solution during the hydrometallurgical recycling method of spent lithium-ion batteries (LIBs) due to the usage of iron in battery casings and machinery parts of recycling equipment, which would definitely affect the physical and electrochemical features of the recovered active materials. In this paper, the effects of iron impurity with different valence states (Fe 2+ and Fe 3+ ) and gradient concentrations (0.2, 1.0, and 5.0 at. %) for the obtained LiNi 0.6 Co 0.2 Mn 0.2 O 2 (NCM622) cathodes are fully studied. It is found that Fe3+ impurity could easily lower the tap density and average size of NCM622 particles and even introduce some impurity phases in the NCM622 structure at high concentration (5.0 at. %), leading to much lower specific capacity, worse rate capability, and cycling performance of the Fe 3+ -based NCM622 cathode. On contrast, with certain concentrations of Fe 2+ impurity (0.2 and 1.0 at. %), the NCM622 cathode material exhibits comparable and much better electrochemical properties compared with the virgin NCM622 materials. Based on these results, the valence of Fe impurity should be considered and controlled as well as its concentration during the recycling process design for spent LIBs.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2016

Li 2 S nano spheres anchored to single-layered graphene as a high-performance cathode material for lithium/sulfur cells

Fully lithiated lithium sulfide (Li 2 S) is a promising cathode material for Li/S cells due to its high theoretic capacity (1166 mA h g -1 ) and specific energy (2600 W h kg -1 ). However, low utilization of sulfur and poor rate capability still hinder the practical application of Li/S cells. In this paper, a carbon coated Li 2 S/graphene composite (Li 2 S/G@C) was developed by incorporating Li 2 S nano spheres with single-layered graphene and further forming a durable protective carbon layer on the surface of the Li 2 S particles using a facile CVD method. The high rate capability and remarkable cycle life of the Li 2 S/G@C cathode were demonstrated, which was mainly attributed to the unique structure of the Li 2 S/G@C that can significantly improve not only the electrical conductivity, but also the mechanical stability of the sulfur cathode.

25 ENERGY STORAGE↗
DOE OSTI2022

Revisiting the capacity-fading mechanism of P2-type sodium layered oxide cathode materials during high-voltage cycling

We report P2-type sodium layered oxide cathode (Na 2/3 Ni 1/3 Mn 2/3 O 2 , P2-NNMO) has attracted great attention as a promising cathode material for sodium ion batteries because of its high specific capacity. However, this material suffers from a rapid capacity fade during high-voltage cycling. Several mechanisms have been proposed to explain the capacity fade, including intragranular fracture caused by the P2-O2 phase transion, surface structural change, and irreversible lattice oxygen release. Here we systematically investigated the morphological, structural, and chemical changes of P2-NNMO during high-voltage cycling using a variety of characterization techniques. It was found that the lattice distortion and crystal-plane buckling induced by the P2-O2 phase transition slowed down the Na-ion transport in the bulk and hindered the extraction of the Na ions. The sluggish kinetics was the main reason in reducing the accessible capacity while other interfacial degradation mechanisms played minor roles. Our results not only enabled a more complete understanding of the capacity-fading mechanism of P2-NNMO but also revealed the underlying correlations between lattice doping and the moderately improved cycle performance.

25 ENERGY STORAGE↗
DOE OSTI2018

Structure and Voltage Recovery Driven by Defects Elimination in Li-Rich Layered Oxide Cathode Materials

Lithium-ion batteries (LIBs) are ubiquitous in a wide range of technologies, including cell phones, electric vehicles, and energy grid, and are indispensable in the transition toward sustainable energy technology. The battery performance is inherently connected to the capability of lithium ions to reversibly intercalate with the electrodes. The capacity of classical layered transition metal (TM) oxides, the primary commercial cathode materials, is limited to cationic redox activity. Anionic redox has thus emerged as a new paradigm for designing novel cathodes for next generation LIBs. It is recently confirmed oxygen redox in lithium-rich layered oxides (LRLO) with composition xLi 2 MnO 3 ∙(1-x)LiTMO 2 , which enables this group of materials exhibit reversible capacities exceeding 280 mAh g -1 . Unfortunately, this material undergoes voltage fading and instability that is rooted in irreversible structural transformation in terms of defects formation including lithium and oxygen vacancies, lithium tetrahedron, TM migration, edge dislocations, stacking fault, and local strain. Modification methods including morphology control, composition gradient, surface treatment, foreign elements doping, etc., have been proposed in the literatures to mitigate the defects formation and maintain the structure reversibility. Despite their improvement, the intrinsic voltage fading is still inevitable and remains a challenge that will require considerable effort to overcome. In this work, we demonstrate a path to recover the layer structure and working voltage through high-temperature annealing. The treatment at high temperature recovers the local Li-excess environments around oxygen, oxygen stacking sequence, and eliminates microstrain associated with different defects. As a result, the voltage profile once more shows plateau region during charge and the average discharge voltage is restored of the cycled cathode after heat treatment. Both theoretical calculations and experimental characterizations illustrate the mechanisms underlying the heating induced recovery. The structure metastability and defects removal are decisive in structure and voltage recovery of LRLO cathode material.

Zhang, Minghao↗
DOE OSTI2014

Investigation into the effect of Si doping on the cell symmetry and performance of Sr{sub 1−y}Ca{sub y}FeO{sub 3−δ} SOFC cathode materials

In this paper we report the successful incorporation of silicon into Sr{sub 1−y}Ca{sub y}FeO{sub 3−δ} perovskite materials for potential applications as electrode materials for Solid Oxide Fuel Cells. It is observed that Si doping leads to a change from a tetragonal or orthorhombic structure (with partial ordering of oxygen vacancies) to a cubic one (with the oxygen vacancies disordered). The structures of the phases, SrFe{sub 0.85}Si{sub 0.15}O{sub 3−δ}, Sr{sub 0.75}Ca{sub 0.25}Fe{sub 0.85}Si{sub 0.15}O{sub 3−δ} and Sr{sub 0.5}Ca{sub 0.5}Fe{sub 0.85}Si{sub 0.15}O{sub 3−δ}, were analysed using neutron powder diffraction. The data confirmed the cubic unit cell, with no long range oxygen vacancy ordering. Conductivity measurements showed an improvement in the conductivity on Si doping, especially for samples with high Ca content. Composite electrodes comprising 50% Ce{sub 0.9}Gd{sub 0.1}O{sub 1.95} and 50% Sr{sub 1−y}Ca{sub y}(Fe/Si)O{sub 3−δ} on dense Ce{sub 0.9}Gd{sub 0.1}O{sub 1.95} pellets were therefore examined in air. An improvement in the area specific resistances (ASR) values is observed for the Si-doped samples with respect to the undoped samples. Thus the results show that silicon can be incorporated into Sr{sub 1−y}Ca{sub y}FeO{sub 3−δ}-based materials and can have a beneficial effect on the performance, making them potentially suitable for use as cathode material in Solid Oxide Fuel Cells (SOFC). - Graphical abstract: X-ray diffraction patterns for: (left) Sr{sub 0.75}Ca{sub 0.25}Fe{sub 1−x}Si{sub x}O{sub 3−δ} (x=0, 0.05, 0.10 and 0.15) and (right) Sr{sub 0.25}Ca{sub 0.75}Fe{sub 1−x}Si{sub x}O{sub 3−δ} (x=0, 0.05, 0.10 and 0.15), showing the stabilization of the cubic form of these series through silicon doping. For the latter Sr{sub 0.25}Ca{sub 0.75}Fe{sub 1−x}Si{sub x}O{sub 3−δ} phase, the stabilisation is not quite complete at 15% Si doping. - Highlights: • In Sr{sub 1−y}Ca{sub y}Fe{sub 1−x}Si{sub x}O{sub 3−δ} materials Si doping results in a change from tetragonal or orthorhombic symmetry. • An improvement in the conductivity is observed on Si doping. • An improvement in the area specific resistances (ASR) values is observed on Si doping. • Silicon can have a beneficial effect on the performance in perovskite materials.

36 MATERIALS SCIENCE↗
DOE OSTI2017

Investigation of Thermal Stability of P2–Na x CoO 2 Cathode Materials for Sodium Ion Batteries Using Real-Time Electron Microscopy

In this paper, we take advantage of in situ transmission electron microscopy (TEM) to investigate the thermal stability of P2-type Na x CoO 2 cathode materials for sodium ion batteries, which are promising candidates for next-generation lithium ion batteries. A double-tilt TEM heating holder was used to directly characterize the changes in the morphology and the crystallographic and electronic structures of the materials with increase in temperature. The electron diffraction patterns and the electron energy loss spectra demonstrated the presence of cobalt oxides (Co 3 O 4 , CoO) and even metallic cobalt (Co) at higher temperatures as a result of reduction of Co ions and loss of oxygen. The bright-field TEM images revealed that the surface of Na x CoO 2 becomes porous at high temperatures. Higher cutoff voltages result in degrading thermal stability of Na x CoO 2 . Finally, the observations herein provide a valuable insight that thermal stability is one of the important factors to be considered in addition to the electrochemical properties when developing new electrode materials for novel battery systems.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2018

Chloride ion-doped polypyrrole nanocomposite as cathode material for rechargeable magnesium battery

Highlights: • Chloride ion-doped polypyrrole nanocomposite is firstly developed as new cathode for rechargeable magnesium battery. • Reversible redox reactions of nitrogen species in nanostructured polypyrrole in RMB system are proved. • More than 95 mAh g{sup −1} capacity and a high Coulombic efficiency of about 96% are delivered. - Abstract: We report a chloride ion-doped polypyrrole/carbon nanotube (PPyCl/CNTs) nanocomposite as new cathode material for rechargeable magnesium battery. The PPyCl/CNTs nanocomposite with amorphous structure, uniform chlorine distribution and large specific surface area shows reversible electrochemical energy storage upon redox reaction of nitrogen species. The structural configuration of PPyCl by the incorporation of CNTs contributes to significant improvement in the electrochemical performance. More than 95 mAh g{sup −1} capacity and a high Coulombic efficiency of about 96% are delivered. This study offers a promising way for designing new cathode for rechargeable magnesium batteries.

25 ENERGY STORAGE↗
DOE OSTI2017

Designing Air-Stable O 3 -Type Cathode Materials by Combined Structure Modulation for Na-Ion Batteries

As promising high-capacity cathode materials for Na-ion batteries, O 3 -type Na-based metal oxides always suffer from their poor air stability originating from the spontaneous extraction of Na and oxidation of transition metals when exposed to air. Here, a combined structure modulation is proposed to tackle concurrently the two handicaps via reducing Na layers spacing and simultaneously increasing valence state of transition metals. Guided by density functional theory calculations, we demonstrate such a modulation can be subtly realized through cosubstitution of one kind of heteroatom with comparable electronegativity and another one with substantially different Fermi level, by adjusting the structure of NaNi 0.5 Mn 0.5 O 2 via Cu/Ti codoping. The as-obtained NaNi 0.45 Cu 0.05 Mn 0.4 Ti 0.1 O 2 exhibits an increase of 20 times in stable air-exposure period and 9 times in capacity retention after 500 cycles, and even retains its structure and capacity after being soaked in water. In such a simple and effective structure modulation reveals a new avenue for high-performance O 3 -type cathodes and pushes the large-scale industrialization of Na-ion batteries a decisive step forward.

25 ENERGY STORAGE↗
DOE OSTI2020

Anion Reactivity in Cation‐Disordered Rocksalt Cathode Materials: The Influence of Fluorine Substitution

Abstract The demand for high energy‐density, mass‐producible cathode materials has spurred the exploration of new material structures and compositions. Lithium‐excess, cation‐disordered rocksalt (DRX) materials are a new class of transition metal oxides that display high capacity and environmental friendly composition. These materials achieve their high capacities partially through oxygen redox, which leads to oxygen loss and detrimental reactivity with the electrolyte. It has previously been shown that oxygen loss can be suppressed by partial substitution of the lattice oxygen for fluorine, but the explicit mechanism behind this effect remains unknown. In this work, differential electrochemical mass spectrometry (DEMS) and titration mass spectrometry are used to quantify the primary electrochemical reactions occurring during the first cycle in DRX materials. Comparing a DRX oxide and a DRX oxyfluoride, it is shown that fluorination limits oxygen redox and suppresses oxygen loss. Additionally, DEMS is coupled with fluoride‐scavenging to demonstrate that small amounts of fluorine dissolve from DRX oxyfluorides during the first cycle. Finally, these techniques are extended over the first several cycles, demonstrating that CO 2 evolution persists and fluoride dissolution continues to a diminishing extent during the first few cycles. These findings motivate surface modifications to control interfacial reactivity and improve long‐term cycling.

Crafton, Matthew J.↗
DOE OSTI2018

Triple conducting cathode material for intermediate temperature protonic ceramic electrochemical devices

The present invention relates to a protonic ceramic fuel cell, a cathode for a protonic ceramic fuel cell, and a method of making the same. More specifically, the cathode for a protonic ceramic fuel cell utilizes a phase-pure perovskite structure of the compound BaCo 0.4 Fe 0.4 Zr 0.2-x Y x O 3- delta., where x is between about 0 and about 0.2. The cathode material may then be utilized in a PCFC as either a thin film porous cathode or as nanoparticles infiltrated into a cathode bone having a different structure.

Tong, Jianhua↗
DOE OSTI2019

Nanoscale LiNi 0.5 Co 0.2 Mn 0.3 O 2 cathode materials for lithium ion batteries via a polymer-assisted chemical solution method

A novel and facile polymer-assisted chemical solution method is successfully developed for the synthesis of LiNi 0.5 Co 0.2 Mn 0.3 O 2 (NCM) with unique morphology and nanoparticle nature as cathodes for lithium-ion batteries. At calcination temperature up to 800°C and 900°C, NCM with hexagonal crystal structure of layered α-NaFeO 2 ( R 3 ¯ m spacing group) is formed and a lower degree of Ni/Li cation mixing for sample heated at 900°C is determined by XRD Rietveld refinement. SEM and TEM images reveal the uniform size distribution of nanoparticles. HRTEM confirms the single crystalline nature of particles with layered structure. XPS verifies the oxidation state of Co 3+ , Mn 4+ , Ni 2+ and Ni 3+ . As compared with the sample prepared at 800°C, the sample heated at 900°C exhibits a higher initial discharge specific capacity of 189 mAh g -1 being charged to 4.5 V at a current rate of 0.05 C, and better cyclability at 4.3 V cutoff voltage at a current density of 1 C. This method has demonstrated easy tuning compositions and particle sizes of cathode materials.

25 ENERGY STORAGE↗
DOE OSTI2022

Design of Next-Gen Cathode Materials With Both Cation and Anion Redox

Among all candidates of positive electrode materials for lithium ion batteries, the lithium rich layered oxides have gained growing research interests in recent years. Their energy density can reach closely to 700-900Wh/g (at materials level), making them the positive electrode materials with highest energy density among all known intercalation compounds for cathode materials. Combining both first principles computation, advanced electron and X-ray based imaging, we demonstrated that in the Li-rich materials oxygen vacancies are present and assist the transition metal ion migration through a facile mechanism. This means it is critically important to control the oxygen activities in these compounds for high voltage operations. In addition, the NiMn spinel oxides show little oxygen activities and under optimized synthesis condition the electrolyte/electrode interface showed superior stability. Combining the strengths of materials synthesis and the advanced characterization, I will discuss in details the strategies for stabilizing the anion redox for higher voltage electrode materials for lithium ion batteries.

Meng, Ying Shirley↗
DOE OSTI2016

Effect of Sr Content and Strain on Sr Surface Segregation of La 1– x Sr x Co 0.2 Fe 0.8 O 3-δ as Cathode Material for Solid Oxide Fuel Cells

Strontium doped lanthanum cobalt ferrite (LSCF) is a widely used cathode material due to its high electronic and ionic conductivity, and reasonable oxygen surface exchange coefficient. However, LSCF can have long-term stability issues such as surface segregation of Sr during solid oxide fuel cell (SOFC) operation, which can adversely affect the electrochemical performance. Thus, understanding the nature of the Sr surface segregation phenomenon, and how it is affected by the composition of LSCF and strain are critical. In this research, heteroepitaxial thin films of La 1-x Sr x Co 0.2 Fe 0.8 O 3 - with varying Sr content (x = 0.4, 0.3, 0.2) were deposited by pulsed laser deposition (PLD) on single crystal NdGaO 3 , SrTiO 3 and GdScO 3 substrates, leading to different levels of strain in the films. The extent of Sr segregation at the film surface was quantified using synchrotron-based total reflection x-ray fluorescence (TXRF), and atomic force microscopy (AFM). The electronic structure of the Sr-rich phases formed on the surface was investigated by hard X-ray photoelectron spectroscopy (HAXPES). The extent of Sr segregation was found to be a function of the Sr content in bulk. Lowering the Sr content from 40% to 30% reduced the surface segregation, but further lowering the Sr content to 20% increased the segregation. The strain of LSCF thin films on various substrates was measured using high-resolution x-ray diffraction (HRXRD) and the Sr surface segregation was found to be reduced with compressive strain and enhanced with tensile strain present within the thin films. A model was developed correlating the Sr surface segregation with Sr content and strain effects to explain the experimental results.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Structural regulation-induced Li-electron disentanglement for stabilized oxygen redox of Li-excess disordered rock-salt cathode materials

Since the discovery of its electrochemical activity, Li-excess disordered rock-salt (DRX) cathode material has received worldwide attention as it sets up a new way to exploit oxygen redox beyond the conventional layered structure with late-3d transition metals. However, the intricate structure-function relationship in the disordered lattice of the DRX material fogs the researcher's lens on the underlying redox mechanisms. Here, in this study, we employ a synergistic approach combining neutron total scattering with reverse Monte Carlo modeling and density functional theory calculations to unravel the landscape of oxygen redox reactions in DRX. Redox activities are evaluated in diverse oxygen clusters (OLi x TM 6-x ) and the spatial distribution of these clusters in the model DRX structure (Li 1.16 Ti 0.37 Ni 0.37 Nb 0.1 O 2 and Li 1.2 Ti 0.35 Ni 0.35 Nb 0.1 O 1.8 F 0.2 ) is explicitly determined. The results unveil that by regulating the short-range ordering between cations, fluorine atoms can effectively decouple the location of Li extraction and electron depletion. Such disentanglement between the Li reservoir and electron reservoir in the DRX lattice could play a pivotal role in protecting the oxidized oxygen and preserving the lattice framework during cycling. Through a tentatively designed non-fluorinated DRX oxide realizing similar Li-electron decoupling, an obvious enhancement of the cycling capability can be achieved without compromising the capacity release.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗