Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “cD”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Investigating the Role of Copper in Arsenic Doped Cd(Se,Te) Photovoltaics

The open circuit voltage (VOC) deficit in Cd(Se,Te)-based photovoltaics remains a critical obstacle for pushing the technology closer to theoretical performance limits. Arsenic doping has become a dominant and promising route to achieve the higher p-type carrier concentrations necessary for higher VOC, but challenges associated with this alternate defect chemistry and higher doping density have hindered progress. Here we show that while arsenic doping enables high carrier concentrations (>1016 cm-3), co-doping with copper can provide a boost to VOC without a significant change to carrier concentration. A large data set is initially used to explore current-voltage and capacitance-voltage trends associated with arsenic doped devices with and without copper. A smaller subset is then used to probe these trends using a wide variety of characterization techniques. Copper is found to facilitate reduced interface recombination and potentially improved bulk absorber characteristics, though the mechanisms for these improvements are not yet clear. Despite the improved performance of co-doped devices, VOC is still far below its potential especially for highly doped devices. Low emitter doping in conjunction with high absorber doping seems to be a plausible cause for this significant deficit, though other device properties may exacerbate this problem.

CdSeTe↗
DOE OSTI2022

Effects of Absorber Near-Interface Compensation on Cd(Se,Te) Solar Cell Performance

Arsenic (As) has been shown to be an effective p-type dopant for CdTe, although high performance in As-doped devices remains difficult to achieve. Arsenic is prone to self-compensation in CdTe, as evidenced by the accumulation of dopant atoms in CdTe/Cd(Se,Te) near the interface with MgxZn1-xO (MZO). In this study, we use SCAPS 1D modeling software to investigate the effect of near-interface compensation, helping elucidate loss pathways in present-day As-doped devices and informing future growth directions. We consider three possible results of As accumulation: shallow donors, deep recombination centers, and a thin layer of excess acceptor accumulation. The reduction in near-interface carrier concentration caused by shallow donors is shown to improve open-circuit voltages (VOC), whereas deep levels are detrimental to all performance parameters. The thin charge layer affects capacitance-voltage (CV) measurements by reducing the depletion width while maintaining the same carrier concentration, replicating CV behavior that has been observed in actual devices. These results illustrate the importance of monitoring dopant accumulation within 100 nm of the interface, and suggest that reducing or eliminating the As concentration in this region would be beneficial. An undoped Cd(Se,Te) layer at the interface is suggested as a possible device structure to boost performance.

absorber↗
DOE OSTI2024

Synthesis of Thick Hg x Cd 1– x Se Nanoplatelets by Cation Exchange Catalyzed by Silver Ions, Showing Amplified Spontaneous Emission

II-VI semiconductor nanoplatelets have emerged as promising candidates for various applications, owing to their tunable optical properties dictated by their thickness and compositions. In the realm of infrared technology, mercury chalcogenides stand out as particularly promising materials for optoelectronic applications. However, the direct synthesis of 2D particles in this category remains challenging, thus prompting the exploration of alternative methods such as cation exchange. Here, we demonstrate that the cation exchange process from cadmium to mercury can be effectively catalyzed by monovalent Ag + cations. Further, this catalysis facilitates the formation of alloyed Hg x Cd 1-x Se nanoplatelets with tunable optical properties, with the photoluminescence peak ranging from 1.23 eV for the thinnest three-monolayer (ML) nanoplatelets to 0.92 eV for the thickest 7 ML nanoplatelets. The Ag + ions reduce the activation energy of the cation exchange process by a factor of 2, enabling enhanced penetration of mercury atoms deep into the native CdSe nanoplatelets. Moreover, these nanoplatelets exhibit optical gain in the infrared spectrum, including the 1.3 μm telecommunication band, with a fluence threshold at 80 K of 50 μJ∙cm -2 .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Machine-learned impurity level prediction for semiconductors: the example of Cd-based chalcogenides

The ability to predict the likelihood of impurity incorporation and their electronic energy levels in semiconductors is crucial for controlling its conductivity, and thus the semiconductor's performance in solar cells, photodiodes, and optoelectronics. The difficulty and expense of experimental and computational determination of impurity levels makes a data-driven machine learning approach appropriate. In this work, we show that a density functional theory-generated dataset of impurities in Cd-based chalcogenides CdTe, CdSe, and CdS can lead to accurate and generalizable predictive models of defect properties. By converting any semiconductor + impurity system into a set of numerical descriptors, regression models are developed for the impurity formation enthalpy and charge transition levels. These regression models can subsequently predict impurity properties in mixed anion CdX compounds (where X is a combination of Te, Se and S) fairly accurately, proving that although trained only on the end points, they are applicable to intermediate compositions. We make machine-learned predictions of the Fermi-level-dependent formation energies of hundreds of possible impurities in 5 chalcogenide compounds, and we suggest a list of impurities which can shift the equilibrium Fermi level in the semiconductor as determined by the dominant intrinsic defects. Machine learning predictions for the dominating impurities compare well with DFT predictions, revealing the power of machine-learned models in the quick screening of impurities likely to affect the optoelectronic behavior of semiconductors.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Luminescent hybrid halides with various centering metal cations (Zn, Cd and Pb) and diverse structures

Organic–inorganic hybrid metal halides have been extensively studied because of their great potential in optoelectronics. Herein, we report three hybrid metal halides (Bmpip) 2 ZnBr 4 , (Bmpip) 2 CdBr 4 , and (Bmpip) 8 Pb 11 Br 30 (where Bmpip + is 1-butyl-1-methyl-piperidinium, C 10 H 22 N + ). (Bmpip) 2 ZnBr 4 and (Bmpip) 2 CdBr 4 crystallize in the P2 1 /c space group with zero-dimensional crystal structures with [MBr 4 ] 2− (M = Zn, Cd) tetrahedra isolated by Bmpip + . (Bmpip) 8 Pb 11 Br 30 crystallizes in the triclinic space group P$\overline{1}$ with combining macron] with one-dimensional corrugated chains constructed from face-sharing [PbBr 6 ] 4− octahedra. Furthermore, all of the compounds exhibit excellent ambient and thermal stability. Under UV excitation, all three compounds exhibit very broad emissions. Temperature-dependent photoluminescence measurements indicate that the broad emissions of (Bmpip) 2 ZnBr 4 and (Bmpip) 2 CdBr 4 can be attributed to both the organic cations and self-trapped excitons (STEs) and that the emission of (Bmpip) 8 Pb 11 Br 30 is assigned to STEs. Density functional theory calculations reveal that the three compounds adopt a direct band gap. This work enriches our understanding of the structure types of hybrid metal halides while revealing their diverse emission mechanisms.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Stabilized photoemission from organic molecules in zero-dimensional hybrid Zn and Cd halides

This work explores the utilization of a photoactive organic cation for the preparation of R 2 MCl 4 (M = Zn, Cd; R = (E)-4-styrylpyridinium, C 13 H 12 N + ). Here, the zero-dimensional crystal structures of R 2 MCl 4 contain isolated tetrahedral anions [MCl 4 ] 2– separated by the organic cations R + , leading to flat bands around the optical band gap. In R 2 MCl 4 , the inorganic band gaps are sufficiently large to accommodate the organic molecular levels within, and therefore, the optical properties of R 2 MCl 4 are determined by the organic cation. Our combined optical spectroscopy and density functional theory (DFT) studies confirm the attribution of the bright green photoluminescence demonstrated by R 2 MCl 4 to the organic molecular emission. Importantly, the incorporation of the photoemissive organic cation R + into the hybrid framework in R 2 MCl 4 leads to a nearly two-fold enhancement of the light emission efficiency with the measured photoluminescence quantum yield (PLQY) values of 6.04%, 10.40% and 11.21% for RCl, R 2 ZnCl 4 and R 2 CdCl 4 , respectively. In addition, the crystal structure of the hybrid R 2 MCl 4 ensures a stabilized PL emission, preventing the occurrence of the harmful organic photodimerization, which is a notorious problem for this class of organic emitters.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Determination of electron-hole pair creation energy in Cd 0.9 Zn 0.1 Te 0.98 Se 0.02 quaternary semiconductor for room-temperature gamma-ray detection

We report the first-time measurement of the electron-hole pair (ehp) creation energy (W ehp ) in novel Cd 0.9 Zn 0.1 Te 0.98 Se 0.02 (CZTS) quaternary semiconductor. CZTS in single crystalline form is poised to be the future of large-volume room-temperature gamma-ray detectors due to its excellent compositional homogeneity with highly reduced defects, high-Z (atomic number) constituents, wide bandgap (1.6 eV), and superior charge transport properties. Despite a great deal of study of the material and device properties since its inception, the W ehp in CZTS has not been measured experimentally. Accurate determination of W ehp is essential for calibration of the spectrometer and other theoretical calculations. In this study we have used an absolute calibration approach, which is based on an iterative approach that yields the Wehp as the best-fit parameter. Using a 241 Am alpha emitting radioisotope and a planar CZTS detector, the Wehp in CZTS was calculated to be 4.47 eV. The obtained value has been validated by accurately predicting the peak energy for gamma rays emitted by a 137 Cs source and read by a CZTS detector with different dimensions. The dependences of the calculated W ehp value on the detector dimensions, type of interaction, and effect of charge trapping are also discussed.

42 ENGINEERING↗
DOE OSTI2020

Pulse-shape analysis in Cd 0.9 Zn 0.1 Te 0.98 Se 0.02 room-temperature radiation detectors

The effect of trapping of charge carriers on the shape of the charge pulses from room temperature nuclear detectors, based on a recently discovered quaternary semiconductor Cd 0.9 Zn 0.1 Te 0.98 Se 0.02 (CZTS), has been studied. Here, we present a charge-trapping model that explains the pulse shapes for its entire duration from radiation detectors containing multiple defect types. A piecewise continuous model, based on the movement of a large number of charge carriers rather than a single charge, has been proposed to explain the pulse shapes from planar room temperature nuclear detectors. An experimental method based on the model has been described to extract charge-trapping information. This model can be applied to similar semiconductor detectors with electrically active trap centers, in general, to extract information like pre-trapping drift times. Charge pulses from a CZTS planar detector, exposed to 5486 keV alpha particles emitted by a 241Am source, were acquired using a digitizer, and the pulse shapes were explained based on the proposed model. The pre-trapping drift times for electrons as well as holes in CZTS were calculated and studied as a function of operating bias voltage, and a contrast between their bias dependent behaviors was noticed, indicating the behavioral difference of electron and hole traps.

42 ENGINEERING↗
DOE OSTI2022

(Cd,Mg)Te crystals for picosecond-response optical-to-x-ray radiation detectors

We demonstrate a photodetector sensitive to both optical and x-ray picosecond pulses based on our in-house grown cadmium magnesium telluride (Cd,Mg)Te single crystal. Specifically, we developed In-doped Cd0.96Mg0.04Te material and discuss its femtosecond optical photoresponse, as well as the detector performance, such as <100-pA dark current and up to 0.22-mA/W responsivity for 780-nm wavelength optical radiation. The detector exposed to Ti fluorescence (K alpha) x-ray pulses at 4.5 keV, generated by a free-electron laser beam with the central energy of 9.8 keV and <100 fs pulse width, exhibited readout-electronics-limited 200-ps full-width-at-half-maximum photoresponse, demonstrating that it is suitable for coarse timing in free-electron laser x-ray/optical femtosecond pump–probe spectroscopy applications.

Instruments & Instrumentation↗
DOE OSTI2023

Extrinsic n-type doping of Cd 3 As 2 thin films

Cd 3 As 2 provides an excellent platform for studying the physics of three-dimensional Dirac semimetals due to its stability as well as its compatibility with thin film growth. Crystals made using both bulk and thin film synthesis are unintentionally doped n-type, and other than introducing Zn to reduce the carrier concentration, no efforts have been reported to alter this intrinsic doping without major changes to the band structure. Here, group VI elements Te and Se are introduced during epitaxy to increase the electron concentration of the films. Starting from an unintentionally doped electron concentration of 1–2 × 10 17 cm -3 , concentrations of up to 3 × 10 18 cm -3 are achieved. Analysis of Shubnikov–de Haas oscillations reveals good agreement in calculated effective mass and Fermi velocity of highly doped films with unintentionally doped single crystals with similar electron concentrations. The density functional theory is also performed to study the effects of group VI substitutions and confirms no strong perturbations in the electronic structure. This work ultimately demonstrates tunability in the carrier concentration using extrinsic dopants without substantial changes in the band structure, allowing for intentional design of Fermi-level position for device applications.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2026

Origins of anisotropic linear magnetoresistance with isotropic mobility in Cd 3 As 2 films on GaAs$[110]$

Thin film synthesis allows for the potential to orient crystals in different orientations, permitting measurement of orientation-dependent material aspects such as band structures and transport anisotropy. Here, Dirac semimetal Cd 3 As 2 films are epitaxially grown on GaAs$[110]$ substrates, which has a $[001]$ orientation in-plane. Films contain domains of two different c-axis orientations resulting from an aligned a-axis in-plane. Magnetoresistance measurements performed along both $[1\bar{1}0]$ and $[001]$ substrate directions reveal similar mobility and carrier concentration, but much larger magnetoresistance along the $[001]$ direction, which can be explained by the guiding center diffusion model as arising from anisotropic disorder and different atomic spacings.

36 MATERIALS SCIENCE↗
DOE OSTI2021

First-principles studies of the unconventional spin-phonon coupling mediated by spin-orbit coupling in pyrochlore Cd 2 Os 2 O 7

Here, we perform systematic first-principles calculations to investigate the spin-phonon coupling (SPC) mediated by spin-orbit coupling in pyrochlore Cd 2 Os 2 O 7 which has the peculiar all-in-all-out noncollinear magnetic ground state. A large SPC coefficient up to 34 cm –1 is found, showing the potential of using this material in thermal spin devices.We further split the SPC coefficients to contributions from symmetric exchange interaction, Dzyaloshinskii-Moriya interaction (DMI), and the single ion anisotropy. Unlike what was assumed in previous studies, the DMI contributions are rather important for most modes. These results provide insights for the understanding of the SPC in 5d transition metal oxides and useful guidance for the search of excellent spin caloritronic materials.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2021

Chemically and electrically tunable spin polarization in ferroelectric Cd-based hybrid organic-inorganic perovskites

Density functional theory computations are used to predict the electronic structure of Cd-based hybrid organic-inorganic high-T C ferroelectric perovskites with TMCM-CdCl 3 being one representative. Here we report Rashba-Dresselhaus spin splitting in the valence band of these nonmagnetic compounds. Interestingly, we find in computations that the splitting is not necessarily sensitive to the polarization of the material but to the organic molecule itself which opens a way to its chemical tunability through the choice of the molecule. Further chemical tunability of spin splitting is shown to be possible through a substitution of Cl in the CdCl 3 chains as the valence band was found to originate from Cl-Cl weekly bonding orbitals. For example, the substitution of Cl with Br in TMCM-CdCl 3 resulted in a ten times increase of spin splitting. Furthermore, the spin polarization in these materials gives origin to persistent spin textures which are coupled to the polarization direction, and, therefore, can be controlled by the electric field. This is promising for spintronics applications.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Integer quantum Hall effect and enhanced g factor in quantum-confined Cd 3 As 2 films

Here, we investigate the integer quantum Hall effect in Cd 3 ⁢As 2 thin films under conditions of strong to moderate quantum confinement (thicknesses of 10, 12, and 15 nm). In all the films, we observe the integer quantum Hall effect in the spin-polarized lowest Landau level (filling factor v = 1) and at spin-degenerate higher index Landau levels with even filling factors (v = 2,4,6). With increasing quantum confinement, we also observe a lifting of the Landau-level spin degeneracy at v = 3, manifest as the emergence of an anomaly in the longitudinal and Hall resistivities. Tight-binding calculations show that the enhanced g factor likely arises from a combination of quantum confinement and corrections from nearby subbands.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2023

Short-range magnetic correlations in quasicrystalline i -Tb-Cd

Here, we report on elastic and inelastic neutron scattering from single-grain isotopically enriched samples to elucidate the local magnetic correlations between Tb 3+ moments in quasicrystalline i -Tb-Cd. The inelastic neutron scattering measurements of the crystalline electric field excitations demonstrated that the Tb 3+ moments are directed primarily along the local fivefold axes of the Tsai-type cluster as was found for the TbCd 6 approximant phase. Based on the inelastic measurements, we consider a simple Ising-type model for the moment configurations on a single Tb 3+ icosahedron and enumerate the lowest energy moment configurations. We then calculate the diffuse scattering from these configurations and compare with the experimental magnetic diffuse scattering measurements to identify the most likely single cluster moment configurations and find reasonable agreement between the broad features observed in our scattering simulations. We further use a heuristic glass model as well as large-scale Monte-Carlo simulations of a multicluster model to consider the role of higher-order (longer-range) intercluster correlations for magnetic frustration and the magnetic scattering.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2022

Bicircular Light Floquet Engineering of Magnetic Symmetry and Topology and Its Application to the Dirac Semimetal Cd 3 As 2

Here, we show that bicircular light (BCL) is a versatile way to control magnetic symmetries and topology in materials. The electric field of BCL, which is a superposition of two circularly polarized light waves with frequencies that are integer multiples of each other, traces out a rose pattern in the polarization plane that can be chosen to break selective symmetries, including spatial inversion. Using a realistic low-energy model, we theoretically demonstrate that the three-dimensional Dirac semimetal Cd 3 As 2 is a promising platform for BCL Floquet engineering. Without strain, BCL irradiation induces a transition to a noncentrosymmetric magnetic Weyl semimetal phase with tunable energy separation between the Weyl nodes. In the presence of strain, we predict the emergence of a magnetic topological crystalline insulator with exotic unpinned surface Dirac states that are protected by a combination of twofold rotation and time reversal (2') and can be controlled by light.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Heterostructural Alloy Phase Diagram for (Cd 1-x Zn x ) 3 As 2

Alloying the topological semimetal Cd 3 As 2 with Zn 3 As 2 provides a potential route for controlling the electronic properties. We predict the alloy phase diagram from first-principles calculations, considering that both end members have a crystal structure derived from the antifluorite lattice, but with different arrangements of the unoccupied cation sites. To overcome the limitations of the regular solution approximation and to include short-range order effects, we perform Monte Carlo simulations, parameterize the temperature dependence of the mixing enthalpy ΔH m , and perform thermodynamic integration of the free energy. The resulting phase diagram exhibits features that are unique to heterostructural alloy systems and provides computational predictions of solubility limits and composition ranges that are stable against spinodal decomposition.

36 MATERIALS SCIENCE↗