Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “brand”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14

Space Shuttle ascent guidance, navigation, and control

The factors leading to the particular design of the Shuttle guidance, navigation and control software are discussed. The derivation of explicit guidance equations satisfying a wide range of different maneuver constraints and steering equations that create attitude steering errors from the guidance solutions is presented, as are navigation equations, and equations for identifying faulty instruments from sets of redundant instrument measurements.

R. L. Mchenry↗

Vehicle testing of Cummins turbocompound diesel engine

Two turbocompound diesel engines were installed in Class VIII heavy-duty vehicles to determine the fuel consumption potential and performance characteristics. One turbocompound powered vehicle was evaluated at the Cummins Pilot Center where driveability, fuel consumption, torsional vibration, and noise were evaluated. Fuel consumption testing showed a 14.8% benefit for the turbocompound engine in comparison to a production NTC-400 used as a baseline. The turbocompound engine also achieved lower noise levels, improved driveability, improved gradeability, and marginally superior engine retardation. The second turbocompound engine was placed in commercial service and accumulated 50,000 miles on a cross-country route without malfunction. Tank mileage revealed a 15.92% improvement over a production NTCC-400 which was operating on the same route.

Brands, M. C.↗

Development of tough, moisture resistant laminating resins

Tough, moisture resistant laminating resins for employment with graphite fibers were developed. The new laminating resins exhibited cost, handleability and processing characteristics equivalent to 394K (250 F) curing epoxies. The laminating resins were based on bisphenol A dicyanate and monofunctional cyanates with hydrophobic substituents. These resins sorb only small quantities of moisture at equilibrium (0.5% or less) with minimal glass transition temperature depression and represent an improvement over epoxies which sorb around 2% moisture at equilibrium. Toughening was accomplished by the precipitation of small diameter particles of butadiene nitrile rubber throughout the resin matrix. The rubber domains act as microcrack termini and energy dissipation sites, allowing increased stress accommodation prior to catastrophic failure. A unique blend of amine terminated butadiene nitrile elastomer (MW 2,000) and a high nitrile content butadiene nitrile rubber yielded the desired resin morphology.

Brand, R. A.↗

Development of improved analytical models for mesh reflector surfaces

Several methods for computing the reflection coefficients from mesh surfaces are discussed. Some methods mentioned have severe limitations, and the spectral approach appears to be the most attractive alternative. In spite of some inherent problems, the solutions obtained with this method will offer not only the reflection coefficients but also the currents carried on the mesh. This would allow separation of the power lost to resistive terms from that due to transmission loss. Overall, good results and rapid convergence should be obtained from this method when proper care is applied.

Brand, J. C.↗

Lightning activity observed in upper and lower portions of storms and its relationship to storm structure from VHF mapping and Doppler radar

Space time mapping of very high frequencies (VHF) sources reveals lightning processes for cloud to ground (CG) and for large intracloud (IC) flashes are confined to an altitude below about 10 km and closely associated with the central high reflectivity region of a storm. Another class of IC flashes was identified that produces a splattering of small sources within the main electrically active volume of a storm and also within a large divergent wind canopy at the top of a storm. There is no apparent temporal association between the small high altitude IC flashes occurring almost continuously and the large IC and CG flashes sporadically occurring in the lower portions of storms.

Taylor, W. L.↗

Flight testing of the Space Shuttle

An account is given of the flight testing development phase of the Space Shuttle Orbiter. Because of its low lift-to-drag ratio, the Orbiter must make its 280-kt landing approach in the lower atmosphere with a steep descent angle of 19 deg, pulling up at 1800 feet altitude to a 1-1.5 deg descent angle, and finally gliding to a landing at 195 kt. The Orbiter has almost neutral aerodynamic static stability in pitch and yaw, requiring the use of electronic stabilization to augment the vehicle's natural stability. Attention is given to the flight test program, which comprised the first four flights of the Space Shuttle, and which substantially relied on preflight analysis to establish confidence in Shuttle flight performance. Also discussed are the solar radiation absorption and aerodynamic heating characteristics

Brand, V. D.↗

Lightning and related phenomena in thunderstorms and squall lines

During the past few years, cooperative research on storm electricity has yielded the following results of both basic and applied interest: (1) the intracloud to cloud-to-ground flashing ratio can be as great as 40:1; (2) as storm cells in a squall line dissipate, longer flashes become predominant; (3) there are two centers of lightning activity maxima that are vertically separated, the lower maximum at about 5 km and the upper at about 12 km. In addition, (4) storms produce lightning in their upper regions at a high rate; (5) lightning appears to be related in time to convective motions; (6) positive cloud-to-ground flashes occur in the severe stage of storms and in the later, well-developed stage of squall line storms; (7) mesoscale convective complexes have been observed to have cloud-to-ground flashing rates of more than 48/min; and (8) the electric field in anvils well away from the main storm core (more than 60 km) can be very high, more than 94 kV/m.

Rust, W. D.↗

Lightning activity and severe storm structure

Space-time mapping of VHF sources from four severe storms on June 19, 1980 reveals that lightning processes for cloud-to-ground (CG) and large intracloud (IC) flashes are confined to an altitude below about 10 km and closely associated with the central regions of high reflectivity. Another class of IC flashes produces a splattering of sources within the storms' main electrically active volumes and also within the large divergent wind canopy aloft. There is no apparent temporal association between the small high altitude IC flashes that occur almost continuously and the large IC and CG flashes that occur sporadically in the lower portions of storms.

Taylor, W. L.↗

A sampling procedure to guide the collection of narrow-band, high-resolution spatially and spectrally representative reflectance data

A multistage sampling procedure using image processing, geographical information systems, and analytical photogrammetry is presented which can be used to guide the collection of representative, high-resolution spectra and discrete reflectance targets for future satellite sensors. The procedure is general and can be adapted to characterize areas as small as minor watersheds and as large as multistate regions. Beginning with a user-determined study area, successive reductions in size and spectral variation are performed using image analysis techniques on data from the Multispectral Scanner, orbital and simulated Thematic Mapper, low altitude photography synchronized with the simulator, and associated digital data. An integrated image-based geographical information system supports processing requirements.

Brand, R. R.↗

Akterations/corrections to the BRASS Program

Corrections applied to statistical programs contained in two subroutines of the Bed Rest Analysis Software System (BRASS) are summarized. Two subroutines independently calculate significant values within the BRASS program.

Brand, S. N.↗

Addendum to the STCAL and LTCAL user's guide

The expanded calcium model, identified by the acronym LTCAL (for Long Term Calcium), has been modified extensively in most of the skeletal and phosphorus subsystem models.

Brand, S. N.↗

Space-flight simulations of calcium metabolism using a mathematical model of calcium regulation

The results of a series of simulation studies of calcium matabolic changes which have been recorded during human exposure to bed rest and space flight are presented. Space flight and bed rest data demonstrate losses of total body calcium during exposure to hypogravic environments. These losses are evidenced by higher than normal rates of urine calcium excretion and by negative calcium balances. In addition, intestinal absorption rates and bone mineral content are assumed to decrease. The bed rest and space flight simulations were executed on a mathematical model of the calcium metabolic system. The purpose of the simulations is to theoretically test hypotheses and predict system responses which are occurring during given experimental stresses. In this case, hypogravity occurs through the comparison of simulation and experimental data and through the analysis of model structure and system responses. The model reliably simulates the responses of selected bed rest and space flight parameters. When experimental data are available, the simulated skeletal responses and regulatory factors involved in the responses agree with space flight data collected on rodents. In addition, areas within the model that need improvement are identified.

Brand, S. N.↗

Improving the breed - Shuttle development

An evaluation is made of design improvements that have been made to the Space Shuttle System, and the performance gains obtained; the most important of these stem from efforts to refine procedures for rendezvous with stricken satellites, in order to repair them. Ascent performance has been improved through Space Shuttle Main Engine thrust improvements and external tank weight reductions. On-orbit living convenience has been enhanced by the addition of small sleeping compartments and a galley. Greater flexibility has been obtained for reentry and landing maneuvers. Attention is given to problems which continue to be posed by the thermal protection tiles.

Brand, V.↗

On the convergence of an iterative formulation of the electromagnetic scattering from an infinite grating of thin wires

Contraction theory is applied to an iterative formulation of electromagnetic scattering from periodic structures and a computational method for insuring convergence is developed. A short history of spectral (or k-space) formulation is presented with an emphasis on application to periodic surfaces. The mathematical background for formulating an iterative equation is covered using straightforward single variable examples including an extension to vector spaces. To insure a convergent solution of the iterative equation, a process called the contraction corrector method is developed. Convergence properties of previously presented iterative solutions to one-dimensional problems are examined utilizing contraction theory and the general conditions for achieving a convergent solution are explored. The contraction corrector method is then applied to several scattering problems including an infinite grating of thin wires with the solution data compared to previous works.

Brand, J. C.↗

Space Shuttle development update

The development efforts, since the STS-4 flight, in the Space Shuttle (SS) program are presented. The SS improvements introduced in the last two years include lower-weight loads, communication through the Tracking and Data Relay Satellite, expanded extravehicular activity capability, a maneuvering backpack and the manipulator foot restraint, the improvements in thermal projection system, the 'optional terminal area management targeting' guidance software, a rendezvous system with radar and star tracker sensors, and improved on-orbit living conditions. The flight demonstrations include advanced launch techniques (e.g., night launch and direct insertion to orbit); the on-orbit demonstrations; and added entry and launching capabilities. The entry aerodynamic analysis and entry flight control fine tuning are described. Reusability, improved ascent performance, intact abort and landing flexibility, rollout control, and 'smart speedbrakes' are among the many improvements planned for the future.

Brand, V.↗

The application of contraction theory to an iterative formulation of electromagnetic scattering

Contraction theory is applied to an iterative formulation of electromagnetic scattering from periodic structures and a computational method for insuring convergence is developed. A short history of spectral (or k-space) formulation is presented with an emphasis on application to periodic surfaces. To insure a convergent solution of the iterative equation, a process called the contraction corrector method is developed. Convergence properties of previously presented iterative solutions to one-dimensional problems are examined utilizing contraction theory and the general conditions for achieving a convergent solution are explored. The contraction corrector method is then applied to several scattering problems including an infinite grating of thin wires with the solution data compared to previous works.

Brand, J. C.↗