SEARCH · Engineering Papers

Results for “bottleneck structure”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14

All sources NASA NTRS DOE OSTI

DOE OSTI2024

LES simulations of a vacuum membrane distillation channel with geometric alterations

3D LES simulations were carried out to study the performance of a vacuum membrane distillation module. A wiggly wall profile with/without embedded stiffeners was considered to alleviate axial and radial temperature polarization, the cause of performance decrease in membrane distillation. Results of the flow field show the wiggles create unsteady vortex shedding inducing intense mixing in the channel. Vortex shedding intensity increases as the Reynolds number increases or stiffeners are added. 3D results show a 56% improvement in flux when moving from a flat sheet membrane to a wiggly membrane with stiffeners at a constant Reynolds number, corresponding to an improvement from 11.7 to 41.7 in the Nusselt number, showing that the alterations improved the flux performance by enhancing the heat transfer along the membrane surface and therefore alleviating temperature polarization, a critical bottleneck in membrane distillation systems. Further, a merit criterion was defined based on the Nusselt number and friction factor, and a 40% increase in merit was shown switching from a flat to a wiggly channel, while a 97% merit increase was seen going from flat to wiggly with stiffeners. A 42% enhancement in the flux was also seen moving from a straight channel to a wiggly channel at a higher Reynolds number which highlights the importance of strategically choosing the mass flow rate, as well as inducing flow separation and vortex shedding in the channel to promote mixing and dissipate the thermal boundary layer. The variation in results between the wiggly module with stiffeners and the wiggly module at high Reynolds numbers suggests enhancing mixing structures can be more impactful on flux for this geometry than increasing the flow rate to a turbulent/transitional regime. However, both are preferable for peak system flux performance. Furthermore, a 2D approximation was used to perform simulations on more extended channels to examine the length degradation. The modules with wiggly channels performed at the same flux level with a doubling of the length. On the other hand, the flat sheet modules experienced length degradation by temperature polarization and dropped in flux yield by around 13% of the short-channel value. This work illustrates that modeling the system and understanding how the performance decreases as the membrane surface area increases are critical for a larger module (scaling up from a lab to a prototype module) to maintain high flux performance.

42 ENGINEERING↗

DOE OSTI2021

Autonomous reinforcement learning agent for chemical vapor deposition synthesis of quantum materials

Abstract Predictive materials synthesis is the primary bottleneck in realizing functional and quantum materials. Strategies for synthesis of promising materials are currently identified by time-consuming trial and error and there are no known predictive schemes to design synthesis parameters for materials. We use offline reinforcement learning (RL) to predict optimal synthesis schedules, i.e., a time-sequence of reaction conditions like temperatures and concentrations, for the synthesis of semiconducting monolayer MoS 2 using chemical vapor deposition. The RL agent, trained on 10,000 computational synthesis simulations, learned threshold temperatures and chemical potentials for onset of chemical reactions and predicted previously unknown synthesis schedules that produce well-sulfidized crystalline, phase-pure MoS 2 . The model can be extended to multi-task objectives such as predicting profiles for synthesis of complex structures including multi-phase heterostructures and can predict long-time behavior of reacting systems, far beyond the domain of molecular dynamics simulations, making these predictions directly relevant to experimental synthesis.

36 MATERIALS SCIENCE↗

DOE OSTI2023

Unlocking the magic in mycelium: Using synthetic biology to optimize filamentous fungi for biomanufacturing and sustainability

Filamentous fungi drive carbon and nutrient cycling across our global ecosystems, through its interactions with growing and decaying flora and their constituent microbiomes. The remarkable metabolic diversity, secretion ability, and fiber-like mycelial structure that have evolved in filamentous fungi have been increasingly exploited in commercial operations. The industrial potential of mycelial fermentation ranges from the discovery and bioproduction of enzymes and bioactive compounds, the decarbonization of food and material production, to environmental remediation and enhanced agricultural production. Despite its fundamental impact in ecology and biotechnology, molds and mushrooms have not, to-date, significantly intersected with synthetic biology in ways comparable to other industrial cell factories (e.g. Escherichia coli,Saccharomyces cerevisiae, and Komagataella phaffii). In this review, we summarize a suite of synthetic biology and computational tools for the mining, engineering and optimization of filamentous fungi as a bioproduction chassis. A combination of methods across genetic engineering, mutagenesis, experimental evolution, and computational modeling can be used to address strain development bottlenecks in established and emerging industries. These include slow mycelium growth rate, low production yields, non-optimal growth in alternative feedstocks, and difficulties in downstream purification. In the scope of biomanufacturing, we then detail previous efforts in improving key bottlenecks by targeting protein processing and secretion pathways, hyphae morphogenesis, and transcriptional control. Bringing synthetic biology practices into the hidden world of molds and mushrooms will serve to expand the limited panel of host organisms that allow for commercially-feasible and environmentally-sustainable bioproduction of enzymes, chemicals, therapeutics, foods, and materials of the future.

59 BASIC BIOLOGICAL SCIENCES↗

DOE OSTI2023

Deep decarbonization and U.S. biofuels production: a coordinated analysis with a detailed structural model and an integrated multisectoral model

Scenarios for deep decarbonization involve biomass for biofuels, biopower, and bioproducts, and they often include negative emissions via carbon capture and storage or utilization. However, critical questions remain about the feasibility of rapid growth to high levels of biomass utilization, given biomass and land availability as well as historical growth rates of the biofuel industry. We address these questions through a unique coordinated analysis and comparison of carbon pricing effects on biomass utilization growth in the United States using a multisectoral integrated assessment model, the Global Change Analysis Model (GCAM), and a biomass-to-biofuels system dynamics model, the Bioenergy Scenario Model (BSM). We harmonized and varied key factors—such as carbon prices, vehicle electrification, and arable land availability—in the two models. We varied the rate of biorefinery construction, the fungibility of feedstock types across conversion processes, and policy incentives in BSM. The rate of growth in biomass deployment under a carbon price in both models is within the range of current literature. However, the reallocation of land to biomass feedstocks would need to overcome bottlenecks to achieve growth consistent with deep decarbonization scenarios. Investments as a result of near-term policy incentives can develop technology and expand capacity—reducing costs, enabling flexibility in feedstock use, and improving stability—but if biomass demand is high, these investments might not overcome land reallocation bottlenecks. Biomass utilization for deep decarbonization relies on extraordinary growth in biomass availability and industrial capacity. In this paper, we quantify and describe the potential challenges of this rapid change.

09 BIOMASS FUELS↗

DOE OSTI2024

Accelerating Computational Materials Discovery with Machine Learning and Cloud High-Performance Computing: from Large-Scale Screening to Experimental Validation

High-throughput computational materials discovery has promised significant acceleration of the design and discovery of new materials for many years. Despite a surge in interest and activity, the constraints imposed by large-scale computational resources present a significant bottleneck. Furthermore, examples of large-scale computational discovery carried through experimental validation remain scarce, especially for materials with product applicability. In this paper, we demonstrate how this vision became reality by first combining state-of-the-art artificial intelligence (AI) models and traditional physics-based models on cloud high performance computing (HPC) resources to quickly navigate through more than 32 million candidates and predict around half a million potentially stable materials. Focusing on solid-state electrolytes for battery applications, our discovery pipeline further identified 18 promising candidates with new compositions and rediscovered a decade’s worth of collective knowledge in the field as a byproduct. By employing around one thousand virtual machines in the cloud, this process took less than 80 hours. We then synthesized and experimentally characterized the structures and conductivities of our top candidates, the Na x Li 3-x YCl 6 (0.5 ≤ x ≤ 2.5) series, demonstrating the potential of these compounds to serve as solid electrolytes. Additional candidate materials are currently under experimental investigation that could offer more examples of the computational discovery of new phases of Li- and Na-conducting solid electrolytes. We believe this unprecedented approach of synergistically integrating AI models and cloud HPC not only accelerates materials discovery but also showcases the potency of AI-guided experimentation in unlocking transformative scientific breakthroughs with real-world applications.

36 MATERIALS SCIENCE↗

NASA NTRSDate not supplied

Discovering Digital Engineering Needs Through Human-Centered Approaches

Digital engineering has the power to transform organizations in profound ways, but digitizing legacy workflows and infusing new technologies into existing practices may not yield the intended results or address the underlying problems or bottlenecks. This paper describes the human-centered approaches used to understand stakeholder challenges and identify digital engineering needs during the design-build-test portion of the systems development lifecycle. Through a series of interactive stakeholder workshops and need-finding activities, key stakeholder needs were identified to help guide the integration of digital engineering technologies. The overarching need was for downstream system development steps to be considered further upstream in the project lifecycle in a manner that allows for proactive and interactive co-constructive idea exploration, problem resolution, and requirements considerations in a collective engagement with engineers and technicians from multiple disciplines to increase efficiency and reduce risks while offering opportunities to improve the final engineered system. Supporting this need was a wide-ranging desire from stakeholders for digital and non-digital support structures for efficient rapid iteration during system development. This work yielded several improvements for system development processes and for digital engineering infusion.

Human-centered Design↗

NASA NTRSDate not supplied

Discovering Digital Engineering Needs Through Human-Centered Approaches

Design Science↗

DOE OSTI2026

Coherent and Dynamic Small Polaron Delocalization in CuFeO 2

Small polarons remain a bottleneck in realizing efficient transition metal oxide devices. Routes to engineer small polaron coupling to electronic states and lattice modes to control carrier localization remain unclear. Here, we measure small polaron formation in CuFeO 2 using transient extreme ultraviolet reflection spectroscopy and compare to theoretical predictions in realistically parametrized Holstein models, demonstrating that polaron localization depends on coupling to high-frequency versus low-frequency phonon bath components. We measure small polaron formation on a comparable ∼100 fs timescale to other Fe(III) compounds. Dynamic delocalization of the polaron follows formation through a coherent lattice expansion between Fe–O layers and charge-sharing with surrounding Fe(IV) states. Simulations reveal two major factors dictate polaron formation timescales: phonon density and reorganization energy distributions between acoustic and optical modes, matching experimental findings. Our work shows how electronic-structural coupling in a polaron-host material can be leveraged to suppress polaronic effects for various applications.

Hematite↗

DOE OSTI2022

Evaluation of UAV-derived multimodal remote sensing data for biomass prediction and drought tolerance assessment in bioenergy sorghum

Screening for drought tolerance is critical to ensure high biomass production of bioenergy sorghum in arid or semi-arid environments. The bottleneck in drought tolerance selection is the challenge of accurately predicting biomass for a large number of genotypes. Although biomass prediction by low-altitude remote sensing has been widely investigated on various crops, the performance of the predictions are not consistent, especially when applied in a breeding context with hundreds of genotypes. In some cases, biomass prediction of a large group of genotypes benefited from multimodal remote sensing data; while in other cases, the benefits were not obvious. In this study, we evaluated the performance of single and multimodal data (thermal, RGB, and multispectral) derived from an unmanned aerial vehicle (UAV) for biomass prediction for drought tolerance assessments within a context of bioenergy sorghum breeding. The biomass of 360 sorghum genotypes grown under well-watered and water-stressed regimes was predicted with a series of UAV-derived canopy features, including canopy structure, spectral reflectance, and thermal radiation features. Biomass predictions using canopy features derived from the multimodal data showed comparable performance with the best results obtained with the single modal data with coefficients of determination (R 2 ) ranging from 0.40 to 0.53 under water-stressed environment and 0.11 to 0.35 under well-watered environment. The significance in biomass prediction was highest with multispectral followed by RGB and lowest with the thermal sensor. Finally, two well-recognized yield-based drought tolerance indices were calculated from ground truth biomass data and UAV predicted biomass, respectively. Results showed that the geometric mean productivity index outperformed the yield stability index in terms of the potential for reliable predictions by the remotely sensed data. Collectively, this study demonstrated a promising strategy for the use of different UAV-based imaging sensors to quantify yield-based drought tolerance.

09 BIOMASS FUELS↗

DOE OSTI2026

Microchannel-based Membrane-less Extraction of Li from Unconventional Lithium Sources & the Separation of REE

This final report provides an overview of the Project's entire duration, covering July 1, 2021 to December 31, 2023. It primarily focuses on the achievements, technological developments, and unique challenges the team faced while working on separating and extracting Lithium from produced waters. The project's primary aim was to create an integrated, high-throughput, membrane-less, and modular microfluidic platform that could extract Lithium from unconventional sources. We have successfully met all goals and milestones envisioned in the SOPO document. The most critical primary milestones, including the Go-No-Go milestone (refer to the Gantt chart in the Appendices), were successfully accomplished. We demonstrated phase separation (>90%) and extraction (>85%) performance in the MPSE using synthetic, and representative produced water composition feed at 50 ml/min total flow through MPSE 36. We have also performed a parametric study of the MPSE operations, beyond the scope of SOPO, exploring operating conditions of current and broader interest. The extended investigation of operational parameters is concurrent with our efforts to seek further development of the MPSE technology beyond the scope of the Project. Along these lines of development, we have made efforts to be responsive to DOE calls for technological developments of other types of resources (beyond PW) for the recovery of Critical Materials and higher TRL development (beyond TRL 4). During the work on this Project, we developed and implemented three innovative technical approaches that emerged from our efforts to successfully meet the Project milestones. The innovative & original technical approaches developed and implemented in this Project are now the contributions to process engineering that could be clearly credited to the Project. First, Convergent Design Approach is a comprehensive feedforward & feedback loop of four design phases: i) design for functionality, ii) design for manufacturing, iii) design for sustainability, and iv) design for market. Next was Process Intensification. A major aim of this Project was to create an innovative phase separation & extraction microscale-based technology for Li separation – thus the words microchannel-based in the Project title. A microscale-based technology is intrinsically in the center of the Process Intensification domain as defined by its unique principles. Therefore, Process Intensification was implicitly envisioned in the Project’s SOPO. Lastly, Time Scale Analysis is a novel tool for discovering the needs and directions of Process Intensification implementations in any process technology. This Project is fully credited for developing and implementing the three novel technical approaches mentioned above. These are general contributions to process engineering that emerged from this Project. Beyond the original SOPO scope, the OSU-U.Pitt research group utilized a Convergent Design methodology, integrating first-principles mathematical modeling with experimental validation on the Minimum Development Vehicle. By creating these Digital Twins, the team rapidly assessed manufacturing iterations to support TEA analysis. This framework further enabled the development of advanced Surface Modification Techniques, where hydrophobic and oleophobic coating strategies were optimized via Digital Twin tools and validated through rigorous 100-hour longevity testing. TEA Analysis: The closing efforts of this Project were focused on the TEA analysis. TEA analysis had two primary functions: i) enabling critical assessments of design variations withing 10 the Concurrent Design Approach, thus enabling evolution of the MPSE design to reach faster- better-cheaper alternatives; and ii) to create a bridge between the accomplishments of this Project and future projects of higher TRL, beyond TRL 6 level. It is important to note that the TEA model created in the Project stirred the technological solutions for the recovery of critical materials toward a vision of a very profitable modular plant that has unique zero-waste water discharge signature. More importantly, thanks to our experimental performance data and conservative assumptions, the TEA model predicts minimal technological and investment risks. Low cost of a modular unit of a nominal capacity of [1000 tons of Li 2 CO 3 /year] positions the MPSE based technology within the reach of community investors, thus offering a paradigm shift in the development of critical technologies. The project successfully navigated two primary challenges: solvent selection and manufacturing adaptation. Restricted by the SOPO to existing literature for lithium recovery, the team identified a critical need for a "material excellence program" to develop next-generation solvents, eventually concluding with a preliminary investigation into promising Ionic Liquids (ILs). Simultaneously, COVID-19 supply chain disruptions forced a pivot from traditional manufacturing to advanced additive methods at ATAMI-OSU. By transitioning from stainless steel to 3D-printed polymer substrates, the team achieved a transformative three-order-of- magnitude reduction in manufacturing costs and compressed prototyping timelines from several months to just two days. The MPSE technology offers significant energy, environmental, and economic advantages by overcoming the traditional bottlenecks of phase-separation hardware and contactor size. Unlike conventional mixer-settlers or membrane-based systems, MPSE operates without moving parts or fouling-prone membranes, achieving robust performance even with challenging, viscous, or particulate-heavy feeds. Key performance metrics include an energy intensity reduction of 5–50x (3–40 kJ/m 3 ) compared to incumbent technologies and a dramatic reduction of processing time to under 60 seconds, which drastically reduces the physical plant footprint. These technical efficiencies translate into superior economic outcomes; for a 100 t/year Li 2 CO 3 facility, implementing MPSE is projected to nearly halve contactor CAPEX (from $\$$6.08M to $\$$3.01M) and significantly increase the project's Net Present Value (NPV), derisking new investment and enabling distributed critical-mineral processing configurations. The commercialization of MPSE technology is being spearheaded by Vigsur Dynamics Inc., which has adopted a structured, parallel approach to technical and business development since its formation in January 2026. Following extensive customer discovery and engagement with the Oregon State University accelerator, Vigsur Dynamics is working to establish a business model that transitions from pilot demonstrations to modular hardware sales, ultimately aiming for a "build-own-operate" service strategy. Current technical milestones—including 100 hours of continuous operation, superior energy efficiency, and successful 6-unit modular scale-up— provide a foundation for this transition. Backed by ongoing IP licensing and a growing network of industrial and venture advisors, the company is actively de-risking the platform to replace conventional mixer-settler systems in the critical minerals market.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2023

Recombination smooths the time-signal disrupted by latency in within-host HIV phylogenies

Within-host HIV evolution involves several features that may disrupt standard phylogenetic reconstruction. One important feature is re-activation of latently integrated provirus, which has the potential to disrupt the temporal signal, leading to variation in the branch lengths and apparent evolutionary rates in a tree. Yet, real within-host HIV phylogenies tend to show clear, ladder-like trees structured by the time of sampling. Another important feature is recombination, which violates the fundamental assumption that evolutionary history can be represented by a single bifurcating tree. Thus, recombination complicates the within-host HIV dynamic by mixing genomes and creating evolutionary loop structures that cannot be represented in bifurcating trees. In this paper, we develop a coalescent-based simulator of within-host HIV evolution that includes latency, recombination, and effective population size dynamics that allows us to study the relationship between the true, complex genealogy of within-host HIV evolution, encoded as an Ancestral Recombination Graph (ARG), and the observed phylogenetic tree. To compare our ARG results to the familiar phylogeny format, we calculate the expected bifurcating tree after decomposing the ARG into all unique site trees, their combined distance matrix, and the overall corresponding bifurcating tree. While latency and recombination separately disrupt the phylogenetic signal, remarkably, we find that recombination recovers the temporal signal of within-host HIV evolution caused by latency by mixing fragments of old, latent genomes into the contemporary population. In effect, recombination averages over extant heterogeneity, whether it stems from mixed time-signals or population bottlenecks. Further, we establish that the signals of latency and recombination can be observed in phylogenetic trees despite being an incorrect representation of the true evolutionary history. Using an Approximate Bayesian Computation method, we develop a set of statistical probes to tune our simulation model to nine longitudinally-sampled within-host HIV phylogenies. Because ARGs are exceedingly difficult to infer from real HIV data, our simulation system allows investigating effects of latency, recombination, and population size bottlenecks by matching decomposed ARGs to real data as observed in standard phylogenies.

59 BASIC BIOLOGICAL SCIENCES↗

DOE OSTI2023

Enabling Real-time Scattering Data Analysis with Scalable Optimization [Slides]

Diffraction experiments produce datasets with rich multidimensional physics information such as microstructure, equations of state, crystal structure, elastoplastic properties, and other key inputs to LANL mission-essential multiphysics models. This information is typically extracted through a process called Rietveld refinement, which involves selecting appropriate models of the instrument, crystal structure, and microstructure, identifying suitable starting values, and then fitting often hundreds of model parameters using a sequence of empirical parameter turnon/off sequences within a non-global gradient-based optimization. Extensive user expertise is required to properly setup a refinement, identify appropriate models, and select initial parameter values close to truth, such that the refinement will yield parameter values that are optimally predictive. This is a very tedious manual process performed far after the beamline campaign has ended. As facilities have become capable of generating larger volumes of data, the limitation in throughput due to Rietveld refinement has led to a dramatic increase in unanalyzed data as opposed to an intended increase in new science. In our FY22 TED, we demonstrated an integrated toolset providing near real-time automated Rietveld analysis. If this toolset can be optimized to provide automated Rietveld analysis in real-time, this could alleviate the bottleneck in unanalyzed diffraction data, aid in decision-making during experiments, and increase efficiency of the facility.

74 ATOMIC AND MOLECULAR PHYSICS↗

DOE OSTI2026

Group-Additivity–Embedded Multiscale Modeling for Electric Field-Enhanced Nanocatalysis

Elucidating structure-performance relationships remains a central challenge in field-enhanced catalysis, where nanoparticles exhibit nonuniform surface sites with site-dependent responses to electric fields. Low-coordination sites (edges, corners, and tips) are particularly electric field-sensitive (EF), leading to nonuniform charge distribution, adsorption energies, and catalytic activity. Here, using ammonia decomposition on a ruthenium cluster as a model system, we develop a transferable multiscale framework integrating density functional theory, group additivity (GA), Brønsted-Evans-Polanyi scaling, and microkinetic modeling to predict EF-dependent activity across nonuniform cluster sites. Across sites and fields, the nitrogen adsorption energy (E N ) emerges as the governing descriptor, yielding robust volcano relationships whose optimum shifts systematically with field: negative fields strengthen N binding via electron accumulation, while positive fields weaken N binding via charge depletion, moving the optimal E N toward weaker binding. Microkinetic analysis shows that N≡N bond formation remains the key kinetic bottleneck over most conditions; positive fields lower the effective barrier and, critically, increase the fraction of near-optimal active sites, leading to a net enhancement in overall activity relative to zero-field and negative-field cases. By capturing EF- and site-dependent energetics with high accuracy and low computational cost, this GA-embedded multi-scale simulation workflow provides a physically interpretable route to predict and design field-enhanced nanocatalysis.

ammonia decomposition↗

DOE OSTI2021

Oxygen redox chemistry in P2-Na 0.6 Li 0.11 Fe 0.27 Mn 0.62 O 2 cathode for high-energy Na-ion batteries

Owing to the abundance of raw material reserves and low cost, Na-ion batteries (NIBs) have successfully gained widespread attention from academic and industrial communities in the past few decades. However, the insufficient cathode energy density is still one of the critical bottlenecks restricting the development of NIBs. Following a strategy of introducing Li+ into the transition-metal (TM) layer to enhance the oxygen redox reaction, a novel layered cathode material P2-Na 0.6 Li 0.11 Fe 0.27 Mn 0.62 O 2 (NLFMO) was designed and successfully synthesized. This NLFMO cathode not only delivers a large initial reversible capacity of 207.3 mA h g -1 , but also shows a good cycling performance (104.2 mA h g -1 after 80 cycles) and rate capability (126.2 mA h g -1 at 1C). The ultrahigh capacity is contributed by both cationic (Fe 3+ /Fe 4+ and Mn 3+ /Mn 4+ ) and partially reversible anionic redox (O 2- /O n- ) reactions, revealed by in situ X-ray absorption spectroscopy (XAS) and X-ray photoelectron spectroscopy (XPS) techniques. Moreover, no detrimental P2–O2 phase transition was observed in ex situ X-ray diffraction (XRD) patterns, confirming the high structural stability during Na + deintercalation/intercalation processes. These results provide valuable information about the high-energy density layered cathode materials based on anionic redox reactions for NIBs.

25 ENERGY STORAGE↗

DOE OSTI2023

Promising approaches for the assembly of the catalytically active, recombinant Desulfomicrobium baculatum hydrogenase with substitutions at the active site

Background: Hydrogenases (H2ases) are metalloenzymes capable of the reversible conversion of protons and electrons to molecular hydrogen. Exploiting the unique enzymatic activity of H2ases can lead to advancements in the process of biohydrogen evolution and green energy production. Results: Here we created of a functional, optimized operon for rapid and robust production of recombinant [NiFe] Desulfomicrobium baculatum hydrogenase (Dmb H2ase). The conversion of the [NiFeSe] Dmb H2ase to [NiFe] type was performed on genetic level by site-directed mutagenesis. The native dmb operon includes two structural H2ase genes, coding for large and small subunits, and an additional gene, encoding a specific maturase (protease) that is essential for the proper maturation of the enzyme. Dmb, like all H2ases, needs intricate bio-production machinery to incorporate its crucial inorganic ligands and cofactors. Strictly anaerobic, sulfate reducer D. baculatum bacteria are distinct, in terms of their biology, from E. coli. Thus, we introduced a series of alterations within the native dmb genes. As a result, more than 100 elements, further compiled into 32 operon variants, were constructed. The initial requirement for a specific maturase was omitted by the artificial truncation of the large Dmb subunit. The assembly of the produced H2ase subunit variants was investigated both, in vitro and in vivo. This approach resulted in 4 recombinant [NiFe] Dmb enzyme variants, capable of H 2 evolution. The aim of this study was to overcome the gene expression, protein biosynthesis, maturation and ligand loading bottlenecks for the easy, fast, and cost-effective delivery of recombinant [NiFe] H2ase, using a commonly available E. coli strains. Conclusion: The optimized genetic constructs together with the developed growth and purification procedures appear to be a promising platform for further studies toward fully-active and O 2 tolerant, recombinant [NiFeSe] Dmb H2ase, resembling the native Dmb enzyme. It could likely be achieved by selective cysteine to selenocysteine substitution within the active site of the [NiFe] Dmb variant.

59 BASIC BIOLOGICAL SCIENCES↗

DOE OSTI2024

Bridging the time scale in exascale computing of chemical systems (Final Technical Report)

This report summarizes the work carried out with support of the United States Department of Energy under Award DE-SC0019441. The theme of this project was to develop and apply methods that allowed for the acceleration of atomistic calculations, particularly in challenging areas such as multiphase systems, electrified interfaces, uncertainty estimation, and applications requiring chemical accuracy, which tend to be applications where simulation time is severely bottlenecked by the computational time requirements. Much of the focus was on the application of emerging machine-learning methodologies, although a wide range of methodologies were employed. This report has two major sections. The first focuses on the methodological advances themselves. Within this part, we report a number of major advances, a few examples of which are described here. We report the first machine-learning scheme for the acceleration of electronically grand-canonical calculations (that is, those applicable to electrochemistry). We report new methods of performing transfer learning, in which physics-based priors can be used to provide predictions, often with uncertainty estimates, of images well outside of training sets; we also offer ways to fine-tune these transfer-learning models. We provide a new systematic means to generate and apply minimal training data sets to very large (10,000’s of atoms) systems, with only small training sets appropriate for electronic structure. We developed new methodologies to integrate surface vibrations into surface adsorption calculations. We made advances to the applicability of diffusion Monte Carlo methods to allow (learned) force prediction, finite-size error correction, and force-free means of searching for transition states. We integrated machine-learned atomistic predictions into mechanism generation codes. Additionally, we released new software including AmpTorch, a modernized version of our original atomistic machine-learning code Amp. The second part of this report focuses on the scientific applications that accompanied, and were often enabled by, the methodological advances described earlier. A few examples follow, but full details are in the individual chapters of the report. For example, we developed a general theory of phonon-induced friction on molecular adsorbates. We showed fundamentally how solvent influences the adsorption and desorption process and how it differs from the processes typically involved at the solid–gas interface, making aqueous-phase and electrocatalysis different from traditional thermocatalysis. We examined how metal–insulator and magnetic transitions can be probed, and accelerated exciton dynamics via Frenkel Hamiltonian parameters. We showed that the nearsighted force-training approach, developed within this project, can predict both the stability and reactivity of large nanoparticles, and can also lead to insights on catalyst coverage on binding energies and entropies. These applied studies, which generally integrated with our method development, allowed us to push forward the theoretical understanding of several reaction classes.

08 HYDROGEN↗

DOE OSTI2020

TriC: Distributed-memory Triangle Counting by Exploiting the Graph Structure

Graph analytics has emerged as an important tool in the analysis of large scale data from diverse application domains such as social networks, cyber security and bioinformatics. Counting the number of triangles in a graph is a fundamental kernel with several applications such as detecting the community structure of a graph or in identifying important vertices in a graph. The ubiquity of massive datasets is driving the need to scale graph analytics on parallel systems. However, numerous challenges exist in efficiently parallelizing graph algorithms, especially on distributed-memory systems. Irregular memory accesses and communication patterns, low computation to communication ratios, and the need for frequent synchronization are some of the leading challenges. In this paper, we present TriC, our distributed-memory implementation of triangle counting in graphs using the Message Passing Interface (MPI), as a submission to the 2020 GraphChallenge competition. Using a set of synthetic and real-world inputs from the challenge, we demonstrate a speedup of up to 90x relative to previous work on 32 processor-cores of a NERSC Cori node. We also provide details from distributed runs with up to8192 processes along with strong scaling results. The observations presented in this work provide an understanding of the system-level bottlenecks at scale that specifically impact sparse-irregular workloads and will therefore benefit other efforts to parallelize graph algorithms.

Halappanavar, Mahantesh↗

NASA NTRS2013

A Lightweight I/O Scheme to Facilitate Spatial and Temporal Queries of Scientific Data Analytics

In the era of petascale computing, more scientific applications are being deployed on leadership scale computing platforms to enhance the scientific productivity. Many I/O techniques have been designed to address the growing I/O bottleneck on large-scale systems by handling massive scientific data in a holistic manner. While such techniques have been leveraged in a wide range of applications, they have not been shown as adequate for many mission critical applications, particularly in data post-processing stage. One of the examples is that some scientific applications generate datasets composed of a vast amount of small data elements that are organized along many spatial and temporal dimensions but require sophisticated data analytics on one or more dimensions. Including such dimensional knowledge into data organization can be beneficial to the efficiency of data post-processing, which is often missing from exiting I/O techniques. In this study, we propose a novel I/O scheme named STAR (Spatial and Temporal AggRegation) to enable high performance data queries for scientific analytics. STAR is able to dive into the massive data, identify the spatial and temporal relationships among data variables, and accordingly organize them into an optimized multi-dimensional data structure before storing to the storage. This technique not only facilitates the common access patterns of data analytics, but also further reduces the application turnaround time. In particular, STAR is able to enable efficient data queries along the time dimension, a practice common in scientific analytics but not yet supported by existing I/O techniques. In our case study with a critical climate modeling application GEOS-5, the experimental results on Jaguar supercomputer demonstrate an improvement up to 73 times for the read performance compared to the original I/O method.

Temporal Queries↗