Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “aqueous processing”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14

System Design Description and Requirements for Modeling the Off-Gas Systems for Fuel Recycling Facilities

This document provides descriptions of the off-gases evolved during spent nuclear fuel processing and the systems used to capture the gases of concern. Two reprocessing techniques are discussed, namely aqueous separations and electrochemical (pyrochemical) processing. The unit operations associated with each process are described in enough detail so that computer models to mimic their behavior can be developed. The document also lists the general requirements for the desired computer models.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Electrically Switched Ion Exchange Based on Carbon-Polypyrrole Composite Smart Materials for the Removal of ReO 4 – from Aqueous Solutions

A simple and rapid process of TcO4- (or ReO4-) separation from aqueous solutions based on electrically switched ion exchange (ESIX) method was presented in this study. Polypyrrole (PPy) functionalized activated carbon (AC) was served as an excellent electrically switched ion exchanger for ions removal. Physico- and electro-chemical characteristics show AC-PPy composite exhibited an excellent capacity for ReO4 - removal and high stability during 50 times potential cycling. Chronoamperometric studies show that the treatment of ESIX could be completed within 60 s, which sharply shorten the time of uptake and release of ions. X-ray photoelectron spectroscopy (XPS) confirmed the process of ReO4- removal in AC-PPy composite. The present work provides a promising method for radioactive anion removal in water treatment.

electrically switched ion exchange, activated carb↗

Glass formulation and lab-scale testing of glasses designed for in-can Melter and in-container Vitrification of high-assay low-enriched uranium aqueous polishing Raffinate waste

Glasses were designed for processing a nuclear waste from aqueous polishing of high-assay low-enriched uranium using either In-Can Melter (ICM) or GeoMelt® In-Container Vitrification™ (ICV) technologies, which operate at temperatures of T p ≤ 1100 °C and T p ≤ 1450 °C, respectively. Due to the different operating conditions, the melt and glass properties were optimized differently for each technology. Each glass was designed to optimize for maximum waste loading while simultaneously satisfying processing (e.g., crystallization, viscosity, and conductivity) and product quality (e.g., durability, hazard characteristic, and crystal content) constraints. Here, the raffinate waste contains high nitric acid (4 M) and low total solids (9 g·L -1 ) concentrations. Feed preparation processes were tested to facilitate concentration and nitrate destruction/removal while controlling redox of the melter feed. A successful feed process including sugar addition and spray-drying was performed to generate an adequate melter feed for ICV processing.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Thermal MEMS actuator operation in aqueous media/seawater: Performance enhancement through atomic layer deposition post processing of PolyMUMPs devices

A method to enhance thermal microelectromechanical systems (MEMS) actuators in aqueous media by using dielectric encapsulation layers is presented. Aqueous media reduces the available mechanical energy of the thermal actuator through an electrical short between actuator structures. Al{sub 2}O{sub 3} and TiO{sub 2} laminates with various thicknesses were deposited on packaged PolyMUMPs devices to electrically separate the actuator from the aqueous media. Atomic layer deposition was used to form an encapsulation layer around released MEMS structures and the package. The enhancement was assessed by the increase of the elastic energy, which is proportional to the mechanical stiffness of the actuator and the displacement squared. The mechanical stiffness of the encapsulated actuators compared with the noncoated actuators was increased by factors ranging from 1.45 (for 45 nm Al{sub 2}O{sub 3} + 20 nm TiO{sub 2}) to 1.87 (for 90 nm Al{sub 2}O{sub 3} + 40 nm TiO{sub 2}). Displacement measurements were made for all laminate combinations in filtered tap water and seawater by using FFT based displacement measurement technique with a repeatability of ∼10 nm. For all laminate structures, the elastic energy increased and enhanced the actuator performance: In seawater, the mechanical output energy increased by factors ranging from 5 (for 90 nm Al{sub 2}O{sub 3}) to 11 (for 90 nm Al{sub 2}O{sub 3} + 40 nm TiO{sub 2}). The authors also measured the long-term actuator stability/reliability in seawater. Samples were stored for 29 days in seawater and tested for 17 days in seawater. Laminates with TiO{sub 2} layers allowed constant operation over the entire measurement period.

36 MATERIALS SCIENCE↗

Non-Aqueous Electrochemical Fluorination of Used Nuclear Fuel as an Advanced Separation Process

Development of efficient and environmentally benign methods to reprocess used nuclear fuel (UNF) will enable technologies for a nuclear renaissance. Electrochemical and fluorination methods for reprocessing UNF have been proposed, but combinations of electrochemical and fluorination methods have not been investigated. Electrochemical fluorination may reduce waste volumes compared to the main large-scale aqueous methods for processing used nuclear fuel. A non-aqueous electrochemical fluorination reprocessing method has been developed and demonstrated that enables gas phase uranium recovery while allowing for potential control of the reaction using a single process. Thermodynamic modeling showed a galvanic reaction between UNF and a fluorinating agent, such as NF 3 , in a molten fluoride electrolyte was possible and could selectively fluorinate U to UF 6 . To verify the model results, a reactor system for electrochemical fluorination was constructed along with vessels for product collection and analysis. Initial trials of the electrochemical reaction were performed and characterized by several electrochemical methods. The electrochemical oxidation of U using NF 3 as an oxidizing agent was demonstrated and UF 6 as a reaction product was detected.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Chemical Understanding of Actinide Separations

This work provides a broad overview of the separation processes used to isolate actinides and the experimentally and computationally determined chemical characteristics that define those separations. The redox chemistry of the actinides plays a pivotal role in both aqueous and pyrochemical processing separations. The near-overlapping energies of the 6d and 5f orbitals in the light actinides allow for facile adjustment of actinide oxidation states, which is used in many established separation methods. In contrast, the stable, generally 3+ oxidation states of the mid- and heavy actinides can make it difficult to separate them from the similarly lanthanides(III). In aqueous separations, the tendency of the actinides to form anionic and neutral aqueous complexes with a variety of complexants (especially soft donors) is used to achieve high separation factors between chemically similar elements in both solid–liquid separations and liquid–liquid extraction. This selectivity can be further tuned through the use of specialized organic or solid-phase ligands. Pyroprocessing separations utilize the unique redox behavior of the actinides to adjust their distribution between a molten salt electrolyte and either a solid electrode or molten metal phase. Atomic-level insights into the mechanisms underlying actinide separation processes, with the ultimate goal of predicting separation behavior, can be provided by electronic structure and statistical mechanical-based calculation methods.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A Role for 2-Methyl Pyrrole in the Browning of 4-Oxopentanal and Limonene Secondary Organic Aerosol

“Brown Carbon” (BrC) is a type of organic particulate matter that absorbs visible and near ultraviolet radiation. Reactions of carbonyls in secondary organic aerosol (SOA) produced from limonene with ammonia (NH3) or ammonium sulfate (AS) are known to produce BrC with a distinctive absorption band at 500 nm. Although the general mechanism for this process has been proposed in previous studies, the specific molecular structures of the light-absorbing species remain unclear. This study examined the browning processes occurring in aqueous solutions of AS and 4-oxopentanal (4-OPA), which has a 1,4-dicarbonyl structural motif present in many limonene SOA compounds. The reaction of 4-OPA with AS in a bulk aqueous solution produces a 2-methyl pyrrole (2-MP) intermediate, which is not a strong light absorber by itself, but can react further with carbonyl compounds leading to the eventual formation of BrC chromophores. The direct involvement of 2-MP in the browning process was demonstrated by reacting 2-MP with 4-OPA and with limonene SOA, both of which produced BrC chromophores with distinctive absorption bands at visible wavelengths. The formation of BrC in reaction of 4-OPA with AS and ammonium nitrate (AN) was found to be accelerated by evaporation of the solution suggesting an important role of the dehydration processes in BrC formation from 1,4- dicarbonyls. 4-OPA was also found to produce BrC in aqueous reactions with a broad spectrum of amino acids and amines. The results suggest that 4-OPA may be the smallest atmospherically relevant compound capable of browning by the same mechanism as limonene SOA.

Environmental Molecular Sciences Laboratory↗

Cloud processing and weeklong ageing affect biomass burning aerosol properties over the south-eastern Atlantic

Abstract Southern Africa produces a third of global biomass burning emissions, which have a long atmospheric lifetime and influence regional radiation balance and climate. Here, we use airmass trajectories to link different aircraft observations to investigate the evolution of biomass-burning aerosols during their westward transport from Southern Africa over the south-eastern Atlantic, where a semi-permanent stratocumulus cloud deck is located. Our results show secondary organic aerosol formation during the initial 3 days of transport, followed by decreases in organic aerosol via photolysis before reaching equilibrium. Aerosol absorption wavelength dependency decreases with ageing, due to an increase in particle size and photochemical bleaching of brown carbon. Cloud processing, including aqueous-phase reaction and scavenging, contributes to the oxidation of organic aerosols, while it strongly reduces large diameter particles and single-scattering albedo of biomass burning aerosols. Together, these processes resulted in a marine boundary layer with fewer yet more oxidized and absorbing aerosols.

54 ENVIRONMENTAL SCIENCES↗

54 Mn Radiotracers Demonstrate Continuous Dissolution and Reprecipitation of Vernadite (δ-MnO 2 ) during Interaction with Aqueous Mn(II)

54 Mn radiotracers were used to assess Mn atom exchange between aqueous Mn(II) and vernadite (δ-MnO 2 ) at pH 5.0. Continuous solid–liquid redistribution of 54 Mn atoms occurred, and systems are near isotopic equilibrium after reaction for 3 months. Despite this extensive exchange, X-ray diffraction and X-ray absorption spectroscopy data showed no major changes in vernadite bulk mineralogy. These results demonstrate that the vernadite–Mn(II) interface is dynamic, with the substrate undergoing continuous dissolution and reprecipitation mediated by aqueous Mn(II) without observable impacts on its mineralogy. Interfacial redox reactions between adsorbed Mn(II) and solid-phase Mn(IV) and Mn(III) are proposed as the main drivers of this process. Interaction between aqueous Mn(II) and structural Mn(III) likely involves interfacial electron transfer coupled with Mn atom exchange. Here, the exchange of aqueous Mn(II) and solid-phase Mn(IV) is more complex and is proposed to result from coupled interfacial comproportionation–disproportionation reactions, where electron transfer from adsorbed Mn(II) to lattice Mn(IV) produces transient Mn(III) species that disproportionate to regenerate aqueous Mn(II) and structural Mn(IV). These findings provide further evidence of the importance of Mn(II) (aq) –MnO 2(s) interactions and the attendant production of transient Mn(III) intermediates to the geochemical functioning of phyllomanganates in environments undergoing Mn redox cycling.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Colloidal metal transport in soils developing on historic coal mine spoil

Chemical weathering of pyrite via oxidative dissolution is well-known for generating Fe(III)-bearing colloids at acid mine drainage (AMD) sites; however, the potential for physical weathering of pyrite-bearing materials and subsequent release and transport of colloidal pyrite and associated trace metals has not been studied. Here, we monitored the colloidal metal transport in soil developing on abandoned coal mine spoil with a history of AMD generation to systematically study the contribution of colloids to base and trace metal transport and determine the elemental and mineralogical composition of colloids. Additionally, we collected soil pore water using lysimeters with a pore size of approximately 1.3 μm and centrifugation was used to separate the colloids from aqueous fractions. Metal concentrations of Na, Ca, Mg, K, Si, Al, Mn, Fe, Cu, and Zn were analyzed. Our results show only 14% of the total Al and Cu were present in colloidal fractions whereas 23%, 43%, and 54% of Fe, Mn, and Zn were transported in the colloidal phase, respectively. In contrast, all base metals were primarily present in the aqueous concentration with a small fraction (<10%) present in the colloidal phase. The colloidal fractions of the base metals were inferred to be associated with the concentration of clay colloids. The release of colloids exhibited possible sensitivity toward weather conditions such as alternating high temperatures and rainfall during summer (May–July) compared to fall (August–November). The morphology, elemental, and mineral composition of colloids were determined by a scanning electron microscopy equipped with energy dispersive spectroscopy (SEM-EDS) and X-ray diffraction (XRD). Colloids were dominated by phyllosilicates (biotite, muscovite, and kaolinite) with minor quartz and feldspars. Other minerals phases identified in colloidal fractions were hematite, goethite, arsenopyrite, and chalcopyrite. Colloids consisting of Fe, S, and O with structures resembling framboidal pyrite were identified, which is consistent with the non-silicates minerals identified by XRD. Our study suggests that the physical weathering of pyrite in the mine spoil can generate colloidal pyrite, which is mobilized and transported by soil pore water. Our results also indicate that these pyritic colloids are associated with toxic trace metals including Cu, Mn, and Zn. Colloid mobilization is also impacted by changes in temperature and precipitation, where clay mobilization afer rain events is favored. Further, sudden spikes in aqueous and/or colloidal concentrations may be the result of local heterogeneity within soils developing on mine spoil, indicating that further field-based work is necessary to better characterize pore-scale processes that control aqueous and colloid transport at similar sites to have a better understanding of potential contaminant transport from mine spoil systems.

58 GEOSCIENCES↗

On the Relationship of the Fractal Dimension of Structure with the State of Drying Drops of Crystallizing Solutions (Thermodynamic and Experimental Modeling)

The processes occurring in aqueous salt solutions have been investigated based on thermodynamic and experimental modeling. The self-organization in a drying drop of dehydrated liquids is analyzed using the fractal theory, due to which the quantitative characteristics of the crystallization processes in a small volume are obtained.

36 MATERIALS SCIENCE↗

Corrosion Prevention of Additively Manufactured Aluminum Packing Devices Developed for Process Intensification of CO 2 Capture by Aqueous Amines

Corrosion of additively manufactured (i.e., 3D printed) aluminum packing devices, developed to enhance heat and mass transfer in CO 2 absorption columns using amine-CO 2 scrubbing solutions, is investigated in this paper. The aluminum structures printed by selective laser melting with Al-10Si-0.3Mg feed powder are susceptible to corrosion in aqueous monoethanolamine, both fresh and used CO 2 -saturated solutions. The efficacy of corrosion-protective surface layers of aqueous polyether–ketone–ketone (PEKK) dip coating to provide amine corrosion resistance to the 3D printed aluminum structure is also evaluated. PEKK nanothick layers were coated on the corrugated surface of a 3D printed structure, identical to that of the intensified device, yielding 27 times higher corrosion resistance than the uncoated Al alloy surface. Finally, a systematic long-term electrochemical corrosion analysis revealed that a multilayer PEKK dip coating protocol enables protection of the 3D printed Al alloy surface in various CO 2 –monoethanolamine solutions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Liquid-Phase Effects on Adsorption Processes in Heterogeneous Catalysis

Aqueous solvation free energies of adsorption have recently been measured for phenol adsorption on Pt(111). Endergonic solvent effects of ~1 eV suggest solvents dramatically influence a metal catalyst’s activity with significant implications for the catalyst design. However, measurements are indirect and involve adsorption isotherm models, which potentially reduces the reliability of the extracted energy values. Computational, implicit solvation models predict exergonic solvation effects for phenol adsorption, failing to agree with measurements even qualitatively. In this study, an explicit, hybrid quantum mechanical/molecular mechanical approach for computing solvation free energies of adsorption is developed, solvation free energies of phenol adsorption are computed, and experimental data for solvation free energies of phenol adsorption are reanalyzed using multiple adsorption isotherm models. Explicit solvation calculations predict an endergonic solvation free energy for phenol adsorption that agrees well with measurements to within the experimental and force field uncertainties. Computed adsorption free energies of solvation of carbon monoxide, ethylene glycol, benzene, and phenol over the (111) facet of Pt and Cu suggest that liquid water destabilizes all adsorbed species, with the largest impact on the largest adsorbates.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Engineering Scale Testing of Transformational Non-Aqueous Solvent-Based CO 2 Capture Process at Technology Center Mongstad

Progress is reported for the period from August 8, 2018 to June 30, 2023. This final report involves work performed under ten tasks spanning two budget periods. The tasks are Task 1 Project Management, Task 2 TCM EH&S Risk Evaluation and Permitting, Task 3 Solvent Qualification, Task 4 Preliminary Design of NAS Optimized System, Task 5 TCM Amine Plant Equipment Procurement, Modification and Commissioning, Task 6 Solvent Production, Task 7 NAS Modified Amine Plant Test Plan Development, Testing, and Data Analysis, Task 8 Decommissioning and Waste Handling, Task 9 Final Techno-Economic Assessment and EH&S Risk Assessment, and Task 10 Cost Benefit Analysis and Technology Maturation Planning.

01 COAL, LIGNITE, AND PEAT↗

Zinc-based electrolyte compositions, and related electrochemical processes and articles

An aqueous electrolyte composition is described, including a zinc salt based on zinc acetate or zinc glocolate. The saturation concentration of zinc in the electrolyte composition is in the range of about 2.5M to about 3.5M. The composition also contains at least one salt of a monovalent cation. The molar ratio of zinc to the monovalent cation is about 1:2. An aqueous zinc electroplating bath, containing the aqueous electrolyte composition, is also disclosed, along with a method for the electrochemical deposition of zinc onto a substrate surface, using the electroplating bath. Related flow batteries are also described, including a catholyte, as well as an anolyte based on the aqueous electrolyte composition, with a membrane between the catholyte and the anolyte.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Legacy mercury: A watershed scale cleanup challenge - 15559

Over the next three decades, the US Department of Energy (DOE) Oak Ridge Office of Environmental Management (OREM) will focus on reducing the flux of mercury contamination that exits at the Y-12 National Security Complex (Y-12 NSC) [1, 2]. OREM, Tennessee Department of Environment and Conservation (TDEC), and US Environmental Protection Agency (EPA) have identified mercury contamination within and released from the Y-12 NSC as the highest priority cleanup risk on the Oak Ridge Reservation (ORR). Furthermore, mercury contamination is a worldwide issue with more than 3,000 mercury-contaminated sites currently identified [3], and the United Nations Environment Programme has recently highlighted the risk of this contamination to human health [4]. Unlike other contaminants-metals, radionuclides, and organic solvents-that impact the DOE Environmental Management (DOE-EM) cleanup program at the ORR and other DOE sites, mercury has several unique characteristics that make environmental remediation of the Y-12 NSC one of the most complex efforts ever encountered. These distinctive physicochemical properties for mercury include the following: it is a dense non-aqueous liquid at ambient-temperature-pressure; it is the only metal that bio-magnifies; and it is the only contaminant transported as both a cation and/or a dissolved or gaseous elemental metal (similar to an organic solvent) under environmental conditions. Most importantly, mercury also undergoes biogeochemical transformation processes, which include aqueous and surface complexation, redox reactions, and atypical methylation reactions, producing the potent neurotoxin methylmercury [5, 6]. Each of the aforementioned distinctive characteristics for mercury is observed within this heterogeneous and dynamic watershed-scale system-which includes the Y-12 NSC boundary and 23 km of contaminated creek and flood plain downstream. Because of these complexities, implementing cost effective and sustainable solutions that reduce mercury flux from various primary and secondary contamination sources will require the linking of basic science understanding and applied research advancements into OREM's cleanup process. In 2009, the DOE-EM Office of Site Restoration's Soil and Groundwater Remediation Program and Oak Ridge National Laboratory (ORNL) initiated an applied field research initiative with the goal of developing a systems-based approach to control mercury flux in soil and water to protect surface water, groundwater, and ecological receptors. The Remediation of Mercury and Industrial Contaminants Applied Field Research Initiative (ROMIC-AFRI) represents the vehicle that enables the linking of science to remedial applications. Here we discuss the progress made to date in addressing key applied research and technology development needs to address this watershed scale conundrum. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Hydrogen storage in formic acid: A comparison of process options

Formic acid (53 g H2/liter) is a promising liquid storage and delivery option for hydrogen for fuel cell power applications. In this work we compare and evaluate several process options using formic acid for energy storage. Each process requires different steps, which contribute to the overall energy demand. The first step, i.e. production of formic acid, is thermodynamically unfavorable. However, the energy demand can be reduced if a formate salt is produced via a bicarbonate route instead of forming the free acid from hydrogen and carbon dioxide. This bicarbonate / formate approach also turns out to be comparatively more efficient in terms of hydrogen release than the formic acid route. Even though less energy efficient, catalytic decomposition of formic acid has the advantage of reaching higher volumetric power densities during hydrogen release. Efficiencies of all process options involve aqueous media and are dependent on concentration. Heating water leads to additional energy demand for hydrogen release and thus lowers the overall efficiency. Separation and purification of hydrogen contributes a minor impact to the overall energy demand. However, its effect on efficiency is not negligible. Other process options like thermal decomposition of formic acid or direct formic acid fuel cells thus far do not appear competitive.

Muller, Karsten W.↗

Efficient Isotope Recovery and Seamless Recycle of Target Material in a Salt Matrix

A first step in developing molten salt nuclear reactors (MSRs) is a capability to irradiate capsules containing molten salts and a natural development path for this capability is through applications to produce radioisotopes using a molten salt matrix within existing water-cooled reactors. At present there is almost no capability to prepare, irradiate, and process salts for isotope production in the United States. This report documents an initial plan to discover designs for capsules to produce various radioisotopes ( 99 Mo, 238 Pu, 232 U, and heavy elements) in a way that minimizes waste, simplifies (or really eliminates the need for) recycle/refabrication operations by utilizing a salt matrix for irradiation and nonaqueous, aqueous, or hybrid processes for recovery of the isotopes from the salt matrix. The FY19 goals of this internal study are to: (1) Review past and current salt irradiation vehicle designs and evaluate modern materials, fabrication methods, and design methods to see how new vehicles could function for isotope production in the context of optimized nonaqueous or hybrid recovery methods.(2) engage potential end-users with this approach and gather feedback and provide recommendations for a phased implementation for different application/isotope domains. Oak Ridge National Laboratory (ORNL) staff have developed a unique understanding and capability with regard to molten salts and related pyro-processing methods. This capability can be sustained by passing it on to a new generation by tackling a challenging problem and putting the solution into practice. This study defines opportunities to start down that path.

07 ISOTOPE AND RADIATION SOURCES↗