Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “anodes”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

On-Wafer Wide-Pore Anodic Aluminum Oxide

Anodized aluminum oxide (AAO) has been used as nanotemplates for nanomaterials and nanodevice fabrications. Microfabrication techniques are attracting attention for nanodevice synthesis. However, AAO requires a microfabrication-compatible substrate due to its brittleness. While there are studies that already show AAO on compatible substrates, the pore sizes may not be applicable for multicomponent nanodevices. In this study, wide pore AAOs with ohmic bottom contacts are fabricated on 76 mm Si wafers. Sputtering was used to deposit Al along with supporting layers to achieve this goal. A quiescent electropolishing technique was used to smooth the surface of Al. Standard photolithography was used to define the active area on the Al for anodization. Then 195 V two-step anodization was performed to fabricate wide pore AAOs with pore diameters ranging from 130 ± 32 nm to 400 ± 31 nm with interpore distance of 480 ± 47 nm. Furthermore, it also showed that the ordering of the pores depended on the current density over the more conventional anodization time.

25 ENERGY STORAGE↗
DOE OSTI2026

Time-Evolved Hetero-Alkali Interphases Enable Long-Life Sulfide-Based Anode-Free Solid-State Batteries

Sulfide-based anode-free solid-state batteries (AFSSBs) offer compelling advantages in terms of energy density and safety, yet their practical implementation is severely hindered by undesirable interfacial reactions between sulfide solid electrolytes (SEs) and freshly plated lithium (Li), as well as non-uniform Li plating/stripping behavior. Herein, an effective interfacial stabilization strategy by incorporating sodium bis(fluorosulfonyl)imide (NaFSI) additive into the Li5.4PS4.4Cl1.6 (LPSC) is investigated. Unlike conventional Li-based additives that form static passivation layers, NaFSI introduces a transient hetero-alkali chemistry that kinetically governs interphase evolution during fresh Li plating. NaFSI induces a timesequenced interphase evolution: an initial NaF/LiF-rich layer that suppresses early sulfide reduction, followed by a LiF/Li3N-rich layer that optimizes Li⁺ transport during repeated anode-free cycling. This evolved robust and fast ion conducting layer mitigates interfacial impedance growth, enhances Li + transport kinetics, and suppresses localized Li growth and filamentary shorting. As a result, the anode-free full cell with NaFSI modified LPSC as the interlayer exhibits an excellent cycling stability over 500 cycles at 0.2 C with a capacity retention of 77.6%, whereas the cell with bare LPSC suffers from rapid capacity decay after 100 cycles, retaining only 32.1% of its initial capacity. This work establishes dynamic heteroalkali additive chemistry as a general strategy to kinetically program solid-solid interphases, guiding the interface design in anode-free solid-state batteries.

25 ENERGY STORAGE↗
DOE OSTI2021

Li2O-Based Cathode Additives Enabling Prelithiation of Si Anodes

Low first-cycle Coulombic efficiency is especially poor for silicon (Si)-based anodes due to the high surface area of the Si-active material and extensive electrolyte decomposition during the initial cycles forming the solid electrolyte interphase (SEI). Therefore, developing successful prelithiation methods will greatly benefit the development of lithium-ion batteries (LiBs) utilizing Si anodes. In pursuit of this goal, in this study, lithium oxide (Li2O) was added to a LiNi0.6Mn0.2Co0.2O2 (NMC622) cathode using a scalable ball-milling approach to compensate for the initial Li loss at the anode. Different milling conditions were tested to evaluate the impact of particle morphology on the additive performance. In addition, Co3O4, a well-known oxygen evolution reaction catalyst, was introduced to facilitate the activation of Li2O. The Li2O + Co3O4 additives successfully delivered an additional capacity of 1116 mAh/gLi2O when charged up to 4.3 V in half cells and 1035 mAh/gLi2O when charged up to 4.1 V in full cells using Si anodes.

25 ENERGY STORAGE↗
DOE OSTI2024

Novel Q-Carbon Anodes for Sodium-Ion Batteries

The lack of a standard anode for sodium-ion batteries (SIBs) has greatly hindered their applications. Herein, we show that a novel phase of carbon, namely Q-carbon, is an effective anode material for sodium-ion batteries. The Q-carbon, which is a metastable phase of carbon consisting of about 80% sp 3 - and 20% sp 2 -bonded carbon, is synthesized by nonequilibrium pulsed laser annealing and arc-discharge methods. Two types of Q-carbons, Q1 and Q2, were evaluated as anode material for SIBs. Q1 had a slow quench and was used as the control, whereas Q2 was Q-carbon with a rapid quenching. Q1 exhibits a high initial columbic efficiency of 81% and a low-capacity retention of less than 60%, whereas Q2 has a low initial columbic efficiency of 58% and a high-capacity retention of 81%. Q2 exhibits a stable capacity of 168 mAh·g −1 at a cycling rate of C/3 (124 mA·g −1 ), which is comparable to other hard carbon anodes reported in the literature. This unique synthesis method opens a pathway for the further tuning of Q-carbon with higher trapping/charging of Na + ions in improved SIBs.

25 ENERGY STORAGE↗
DOE OSTI2024

Correlation of Fabrication Methods and Enhanced Wear Performance in Nanoporous Anodic Aluminum Oxide with Incorporated Molybdenum Disulfide (MoS 2 ) Nanomaterials

Wear performance is integral to component longevity, minimizing industrial waste and excess energy costs in a wide variety of applications. Anodized aluminum oxide (AAO) has many beneficial properties leading to its wide use across industries as a surface treatment for many aluminum components, but the wear properties of the coating could be improved significantly. Here, we used an electrochemical method to incorporate molybdenum disulfide (MoS 2 ), a nanomaterial used as a dry lubricant, to modify alloys of aluminum during AAO preparation. Using Raman spectroscopy and tribological scratch measurements, we thoroughly characterized the structure and wear behavior of the films. The MoS 2 deposition procedure was optimal on aluminum 5052 anodized in higher acid concentrations, with friction coefficients at around 0.05 (~10× better than unmodified AAO). Changing anodization conditions to produce harder films with smaller pores led to worsened wear properties, likely because of lower MoS 2 content. Studying a commercial MoS 2 /AAO film of a different Al alloy (7075) showed that a heat treatment step intended to fully convert all deposited MoS x species to MoS 2 can adversely affect wear in some alloys. While Al 6061 and 1100 produced films with worse wear performance compared to Al 5052 or 7075, our results show evidence that acid cleaning after initial anodization likely removes residual alloying elements, affecting MoS 2 incorporation. This study demonstrates a nanomaterial modified AAO film with superior wear characteristics to unmodified AAO and relates fabrication procedure, film structure, and practical performance.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Cryogenic EM Across Length Scales for Li Metal Anode Batteries

An interfacial understanding is necessary for developing strategies to commercialize high-energy density rechargeable lithium metal anode batteries, as currently, the lithium anode/electrolyte interface is unstable with prolonged cycling. We have used several strategies to improve the cycling performance of lithium metal anodes, including reducing the parasitic reactions between lithium metal and the electrolyte, and improving the electrodeposited lithium metal morphology. These strategies have generated unconclusive electrochemical data, that has required the need for nanoscale interfacial characterization of these solid-liquid interfaces. Our team has used the cryogenic transfer workflow developed by Leica in collaboration with cryo-SEM/FIB tools by Thermo Fisher Scientific to cross-section lithium metal anodes and intact coin cell batteries to observe the interfacial structures, lithium morphology, and failure mechanisms relative to changes in electrode contract pressure and electrolyte chemistry. Cross-sectional SEM images and EDS maps of the lithium metal anodes have provided a better understanding of the electrodeposited lithium morphology, quantity of 'dead' lithium metal, and quantity of solid electrolyte interphase material that has formed alongside the lithium metal. In understanding lithium metal battery failure at the system level, we used a cryogenic stage in a laser plasma FIB to cross-section through the coin cell's cap for imaging/mapping the entire battery stack under cryogenic conditions. The tools, methods, and results of these studies will be detailed in this presentation.

characterization↗
DOE OSTI2021

New Insights into the High‐Performance Black Phosphorus Anode for Lithium‐Ion Batteries

Abstract Black phosphorus (BP) is a promising anode material in lithium‐ion batteries (LIBs) owing to its high electrical conductivity and capacity. However, the huge volume change of BP during cycling induces rapid capacity fading. In addition, the unclear electrochemical mechanism of BP hinders the development of rational designs and preparation of high‐performance BP‐based anodes. Here, a high‐performance nanostructured BP–graphite–carbon nanotubes composite (BP/G/CNTs) synthesized using ball‐milling method is reported. The BP/G/CNTs anode delivers a high initial capacity of 1375 mA h g −1 at 0.15 A g −1 and maintains 1031.7 mA h g −1 after 450 cycles. Excellent high‐rate performance is demonstrated with a capacity of 508.1 mA h g −1 after 3000 cycles at 2 A g −1 . Moreover, for the first time, direct evidence is provided experimentally to present the electrochemical mechanism of BP anodes with three‐step lithiation and delithiation using ex situ X‐ray diffraction (XRD), ex situ X‐ray absorption spectroscopy (XAS), ex situ X‐ray emission spectroscopy, operando XRD, and operando XAS, which reveal the formation of Li 3 P 7 , LiP, and Li 3 P. Furthermore, the study indicates an open‐circuit relaxation effect of the electrode with ex situ and operando XAS analyses.

Li, Minsi↗
DOE OSTI2022

A Facile Potential Hold Method for Fostering an Inorganic Solid‐Electrolyte Interphase for Anode‐Free Lithium‐Metal Batteries

Abstract Anode‐free lithium batteries are regarded as an ultimate form of high‐energy‐density lithium‐ion batteries. Unfortunately, irreversible lithium loss during cycling plays a major role in degrading the overall cell performance in the anode‐free configuration. To alleviate the deterioration, building a robust solid‐electrolyte interface on an anode current collector is an indispensable requirement. Here, we present a facile in‐situ electrochemical method of a potential hold during the first charge to guide more salt‐derived (less solvent‐derived) decomposition on the anode interface. We show the distinctive decomposition potential of lithium salts and ether/carbonate solvents, where the Li‐solvation structures with salt contact‐ion‐pairs preferentially decompose to form LiF‐rich and less organic components, leading to enhanced lithium Coulombic efficiency in Li||Cu cells as well as mitigating the capacity fade of Cu||LiFePO 4 and Cu||LiNi 0.8 Mn 0.1 Co 0.1 O 2 cells.

Shin, Woochul↗
DOE OSTI2022

Anode‐Free Lithium–Sulfur Cells Enabled by Rationally Tuning Lithium Polysulfide Molecules

Abstract The two major barriers of practical lithium–sulfur batteries are the poor reversibility of lithium‐metal anode and sluggish kinetics of sulfur cathode. Here, we report a simple yet cogent, molecular tailoring approach for lithium polysulfides, enabling a synergistic enhancement of anode reversibility and cathode kinetics. We show that SnI 4 coordinates with lithium polysulfides to form soluble complexes, resulting in a Li 2 SnS 3 ‐rich anode interphase layer. As Li 2 SnS 3 is stable against parasitic reactions and has a lower ionic resistance over cycling, the Li plating/stripping efficiency is greatly improved. In addition, the formation of soluble complexes between SnI 4 and lithium polysulfides play a non‐negligible role in suppressing the clustering behavior of lithium polysulfide molecules, resulting in a significant enhancement in sulfur conversion kinetics under lean electrolyte conditions. The synergistic improvement is validated in anode‐free, lean‐electrolyte pouch cells with a Li 2 S cathode that displays capacity retention of 78 % after 100 cycles.

Ren, Yuxun↗
DOE OSTI2023

3D Carbon Coating Enabled High‐capacity and Stable Micro‐sized Silicon Suboxide‐graphite Blended Anodes for Practical Lithium‐ion Batteries

Abstract Silicon oxide (SiO x ) is a promising anode candidate of lithium‐ion batteries (LIBs) owing to its extremely high specific capacity. However, the low initial Coulombic efficiency (ICE) and rapid capacity degradation of SiO x , triggered by the enormous volume variation upon repeated (de)lithiation, gravely hinder its practical use. Herein, two mass‐produced micro‐sized SiO x @C composites with obviously different morphologies for commercial LIBs are reported. Particularly, the SiO x ‐graphite blended anode (SiO x @3D‐G‐Gr) based on SiO x wrapped by three‐dimensional (3D) carbon layers (SiO x @3D‐G) exhibits a capacity of 519 mAh g −1 , an ICE of 90.0 % and a capacity retention of 83.4 % at 0.2 C over 100 cycles. which is far exceeding its counterpart SiO x @C‐H‐Gr (65.7 %). The obtained impressive properties of SiO x @3D‐G originate from the critical contribution of 3D carbon layers, which serves as the effective stress buffer and protective layer as well as the strong networks for electron/Li + transport. Accordingly, the full‐cell based on SiO x @3D‐G‐Gr anode and commercial LiCoO 2 cathode delivers a capacity of 803 mAh and an excellent capacity retention of 95.6 % (616 mAh, 96.6 % for graphite, respectively) at 1 C over 100 cycles with a stabilized CE of nearly 100 %. The micro‐sized SiO x @3D‐G showing a promising prospect in the commercial‐grade anodes in LIBs.

Electrochemistry↗
DOE OSTI2020

A self-healing liquid metal anode with PEO-Based polymer electrolytes for rechargeable lithium batteries

In this study, a Ga-Sn liquid metal alloy material is demonstrated as a self-healing anode system due to its fluidity via operando synchrotron-based transmission X-ray microscopy and X-ray diffraction experiments. Cracks formed due to volume expansions can be recovered by the fluidity of the liquid metals. By incorporating with a poly(ethylene oxide) (PEO)-based electrolyte at 60°C, the Ga-Sn anode shows a reversible lithium insertion and extraction process with a high initial discharge specific capacity of 682 mAh g -1 , followed by delivering a capacity of 462 mAh g -1 in the second cycle at C/20 rate. Furthermore, compared with its solid counterparts, the Ga-Sn liquid metal anode demonstrates a better capability to maintain its mechanical integrity and better contact with PEO solid electrolytes due to its advantageous features of the liquid. This study suggests a potential strategy to use liquid metal alloys with polymer solid electrolyte to solve the anode challenges in rechargeable lithium batteries.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Synthesis of hierarchical graphene coated porous Si anode for lithium-ion batteries

The ultra-high capacity and widespread availability of Si materials have resulted in them being the focus of extensive studies to replace the graphite anode. However, the main barriers preventing the Si anodes from large-scale applications are their huge volume change and severe interface reactions in the lithiation/delithiation process, which pulverizes its structure and subsequently deteriorates its cycle life. Here, micrometer-scale porous Si coated with graphene coating (mpSi@G) has been synthesized by using SiO 2 nanoparticles and novel coal-derived humic acid as feedstocks through a magnesiothermic reduction, followed by spray drying and calcination techniques. SEM, Raman, and X-ray absorption analysis demonstrate that the hierarchical graphene shell and micrometer-sized porous Si structure effectively release the Si anode's mechanical stress upon lithiation to achieve good structural stability. Here, the synthesized mpSi@G anode delivers a high initial lithiation capacity of 2974.9 mAh g –1 at 0.1 A g –1 with an initial coulombic efficiency of 70.2 %. Furthermore, the conductive hierarchical graphene network, along with the tight contacts of porous-Si and the graphene shell, contribute to a high capacity of 1109.5 mAh g –1 at a high current density of 5.0 A g –1 , showing excellent rate capability.

25 ENERGY STORAGE↗
DOE OSTI2020

Modulating electrode utilization in lithium-ion cells with silicon-bearing anodes

The stability of silicon-containing anodes can, in principle, be extended by constraining these electrodes to limited states of lithiation. Partial utilization of the anode lessens the volume changes experienced by silicon particles during cycling, which can mitigate mechanisms of performance degradation. In full-cells, anode utilization can be modulated by adjusting the relative capacities of the negative and positive electrodes - the N/P ratio. Here, we examine how the N/P ratio affects the long-term stability of Si-based full-cells, and investigate how this parameter would impact the cost and energy of realistic Li-ion cells. Here, we show that, for some configurations, cell failure due to rapid anode degradation can only by avoided at higher N/P ratios. The price of this enhanced stability is accelerated impedance rise at the cathode. Surprisingly, when electrode expansion is taken into account, increasing N/P ratio can actually increase the specific energy and energy density of silicon-rich Li-ion cells.

25 ENERGY STORAGE↗
DOE OSTI2024

Operando NMR characterization of cycled and calendar aged nanoparticulate silicon anodes for Li-ion batteries

Replacing graphite anodes with Si anodes can greatly increase the energy of current Li-ion batteries. Detailed characterization of Si lithiation reactions, SEI formation, and reversibility are therefore active areas of research. Solid-state 7 Li nuclear magnetic resonance (NMR) spectroscopy is useful for characterizing different lithium local environments within Si anodes. Here, we developed an operando NMR methodology to characterize aging of carbon-coated nanoparticulate Si anodes in pouch cells paired with Ni-rich cathodes. We observed a new lithiation mechanism in the Si nanoparticles: direct formation of over-lithiated Li 15+x Si 4 (x<0.6) phase. Furthermore, our novel operando cells maintained good performance with long-term cycle and calendar aging. Here we identified trapped lithium silicides as a major contributor to capacity fade with aging. Finally, we determined that the addition of Mg (TFSI) 2 to the electrolyte decreased the amount of trapped lithium silicides and therefore increased the capacity and capacity retention for the nanoparticulate Si used.

25 ENERGY STORAGE↗
DOE OSTI2020

Improving Interface Stability of Si Anodes by Mg Coating in Li-Ion Batteries

Silicon (Si) is a promising anode material for high-energy-density lithium-ion batteries (LIBs), but its short calendar life and poor cycling performance prevent its large-scale adoption. Introducing magnesium (Mg) salt into the electrolyte has been recently shown to form a ternary Li–Mg–Si Zintl phase upon lithiation of Si and improve the cycling performance. However, the ternary Zintl phase formation mechanism and its impact on the solid electrolyte interphase (SEI) are not yet well understood. In this work, we demonstrate the formation of a ternary Li–Mg–Si Zintl phase by Mg coating of the Si anode, where Mg diffuses into the Si film upon deposition and intermixes further during the lithiation process. The presence of the Zintl phase improves the interface stability, alters the nature of the SEI, and enhances the cycling performance of the Si anode. This study provides insights into the formation mechanism of the ternary Zintl phase and guidelines for the future design of Si anodes.

25 ENERGY STORAGE↗
DOE OSTI2023

Probing the Effectiveness in Stabilizing Lithium Metal Anodes through Functional Additives

A variety of electrolyte additives were comprehensively evaluated to understand their relative capability in stabilizing lithium metal anode. Although the Li||Cu test is an effective test to rule out ineffective additives, a reliable assessment of individual additives cannot be obtained just by a single evaluation method. Therefore, various methods must be combined to truly assess the stabilization of a lithium anode. Moreover, it was also discovered that a significant depletion of electrolytes occurred during the end-of-life of the lithium batteries, which partially contributed to the sudden failure of the lithium batteries during cycling. However, the main culprit of the sudden failure was identified as the significant increase in the resistance of the lithium metal anode. Further, when used as an additive, cyclic fluorinated carbonates are the most effective in stabilizing the lithium anode and improving the cycling performance of lithium batteries among all the common additives. Despite its cost-effectiveness, the additive in the conventional electrolyte approach provides insufficient protection for lithium metal due to the complete consumption of the additive materials, which is necessary to repair the solid-electrolyte interphase (SEI). Therefore, it is suggested that a larger ratio (>15 wt %) of the SEI former should be employed to achieve effective lithium stabilization.

25 ENERGY STORAGE↗
DOE OSTI2026

Ca Metal Batteries and Sn Anode Alloying: Resolving Misconceptions in Ca–Sn Alloy Formation

Ca metal anode suffers from surface passivation and struggles to effectively plate and strip in conventional Ca electrolytes, making the development of alloy anode for calcium metal battery essential. This work systematically and carefully evaluates the electrochemical formation and feasibility of the Sn anode and its possibility of alloying with Ca using a combination of cyclic voltammetry, scanning electron microscopy with energy-dispersive X-ray spectroscopy (SEM/EDS), X-ray diffraction (XRD), and synchrotron transmission X-ray microscopy (TXM). Electrochemical measurements and SEM/EDS analyses indicate apparent Ca alloy formation. However, detailed XRD and TXM characterization reveal substantial lithium-ion involvement when lithium metal is employed as the reference electrode, even in electrolytes with high Ca salt concentrations. These findings highlight a significant risk of misinterpretation: Although limited Ca–Sn alloying may occur, the faster kinetics of Li + can dominate the alloying process, leading to a Li-driven reactions at the Sn anode. In contrast, cells constructed with Ca metal as both reference and counter electrodes exhibit distinct redox features only during the initial cycles, followed by rapid cell failure. The high oxidation currents induce severe Ca passivation, occurring nearly concurrently with Sn dealloying. Overall, this study provides critical insight into the practical limitations and common experimental artifacts associated with Ca metal battery systems and underscores the necessity for rigorous cell design and cautious interpretation when evaluating alloy chemistry in multivalent Ca-based batteries.

36 MATERIALS SCIENCE↗
DOE OSTI2021

In situ observation of thermal-driven degradation and safety concerns of lithiated graphite anode

Abstract Graphite, a robust host for reversible lithium storage, enabled the first commercially viable lithium-ion batteries. However, the thermal degradation pathway and the safety hazards of lithiated graphite remain elusive. Here, solid-electrolyte interphase (SEI) decomposition, lithium leaching, and gas release of the lithiated graphite anode during heating were examined by in situ synchrotron X-ray techniques and in situ mass spectroscopy. The source of flammable gas such as H 2 was identified and quantitively analyzed. Also, the existence of highly reactive residual lithium on the graphite surface was identified at high temperatures. Our results emphasized the critical role of the SEI in anode thermal stability and uncovered the potential safety hazards of the flammable gases and leached lithium. The anode thermal degradation mechanism revealed in the present work will stimulate more efforts in the rational design of anodes to enable safe energy storage.

25 ENERGY STORAGE↗