Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “angular deformation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14

Quasilocal energy for three-dimensional massive gravity solutions with chiral deformations of AdS{sub 3} boundary conditions

We consider critical gravity in three dimensions; that is, the New Massive Gravity theory formulated about Anti-de Sitter (AdS) space with the specific value of the graviton mass for which it results dual to a two-dimensional conformai field theory with vanishing central charge. As it happens with Kerr black holes in four-dimensional critical gravity, in three-dimensional critical gravity the Bañados-Teitelboim-Zanelli black holes have vanishing mass and vanishing angular momentum. However, provided suitable asymptotic conditions are chosen, the theory may also admit solutions carrying non-vanishing charges. Here, we give simple examples of exact solutions that exhibit falling-off conditions that are even weaker than those of the so-called Log-gravity. For such solutions, we define the quasilocal stress-tensor and use it to compute conserved charges. Despite the drastic deformation of AdS{sub 3} asymptotic, these solutions have finite mass and angular momentum, which are shown to be non-zero.

79 ASTRONOMY AND ASTROPHYSICS↗

Effective Elastic Modulus as a Function of Angular Leaf Span for Curved Leaves of Pyrolytic Boron Nitride

A theoretical equation was derived to predict the spring constant (load/deflection) for a simply supported cylindrical section with a line force applied at the center. Curved leaves of PBN were mechanically deformed and the force versus deflection data was recorded and compared to the derived theoretical equation to yield an effective modulus for each leaf. The effective modulus was found to vary from the pure shear modulus for a flat plate to a mixed mode for a half cylinder as a function of the sine of one half the angular leaf span. The spring constants of individual PBN leaves were usually predicted to within 30%.

Kaforey, M. L.↗

Angular momentum dependence of the nuclear level density parameter

Dependence of nuclear level density parameter on the angular momentum and temperature is investigated in a theoretical framework using the statistical theory of hot rotating nuclei. The structural effects are incorporated by including shell correction, shape, and deformation. The nuclei around Zapprox =50 with an excitation energy range of 30 to 40 MeV are considered. The calculations are in good agreement with the experimentally deduced inverse level density parameter values especially for {sup 109}In, {sup 113}Sb, {sup 122}Te, {sup 123}I, and {sup 127}Cs nuclei.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Inelastic stress analyses at finite deformation through complementary energy approaches

A new hybrid-stress finite element algorithm, suitable for analyses of large, quasistatic, inelastic deformations, is presented. The algorithm is based upon a generalization of de Veubeke's (1972) complementary energy principle. The principal variables in the formulation are the nominal stress rate and spin, and the resulting finite element equations are discrete versions of the equations of compatibility and angular momentum balance. The algorithm produces true rates, time derivatives, as opposed to 'increments'. There results a boundary value problem (for stress rate and velocity) and an initial value problem (for total stress and deformation). A discussion of the numerical treatment of the boundary value problem is followed by a detailed examination of the numerical treatment of the initial value problem, covering the topics of efficiency, stability, and objectivity. The paper is closed with a set of examples, finite homogeneous deformation problems, which serve to bring out important aspects of the algorithm.

Atluri, S. N.↗

A computational procedure for the dynamics of flexible beams within multibody systems

The dynamic analysis of three dimensional elastic beams which experience large rotational and large deformational motions are examined. The beam motion is modeled using an inertial reference for the translational displacements and a body-fixed reference for the rotational quantities. Finite strain rod theories are then defined in conjunction with the beam kinematic description which accounts for the effects of stretching, bending, torsion, and transverse shear deformations. A convected coordinate representation of the Cauchy stress tensor and a conjugate strain definition is introduced to model the beam deformation. To treat the beam dynamics, a two-stage modification of the central difference algorithm is presented to integrate the translational coordinates and the angular velocity vector. The angular orientation is then obtained from the application of an implicit integration algorithm to the Euler parameter/angular velocity kinematical relation. The combined developments of the objective internal force computation with the dynamic solution procedures result in the computational preservation of total energy for undamped systems. The present methodology is also extended to model the dynamics of deployment/retrieval of the flexible members. A moving spatial grid corresponding to the configuration of a deployed rigid beam is employed as a reference for the dynamic variables. A transient integration scheme which accurately accounts for the deforming spatial grid is derived from a space-time finite element discretization of a Hamiltonian variational statement. The computational results of this general deforming finite element beam formulation are compared to reported results for a planar inverse-spaghetti problem.

Downer, Janice Diane↗

In situ TEM investigation of microstructural behavior of superplastic Al–Mg–Sc alloy

Dynamic changes in microstructure of the superplastic ultrafine-grained Al–3Mg–0.2Sc (wt.%) alloy refined by equal-channel angular pressing (ECAP). were observed by in situ transmission electron microscopy at temperatures up to 300 °C (annealing and tensile deformation) in order to simulate the initial stages of superplastic testing. It was found that the microstructure changes significantly during the preheating before the superplastic deformation, which was accompanied by decreased microhardness. During the deformation at 300 °C, high dislocation activity as well as motion of low-angle grain boundaries was observed while high-angle grain boundaries did not move due to the presence of scandium in the alloy. - Highlights: ► We performed in situ TEM annealing and straining on superplastic Al–Mg–Sc alloy. ► We simulated the conditions of early stages of superplastic testing. ► Significant changes in microstructure occur during preheating before deformation.

36 MATERIALS SCIENCE↗

Effect of the Coulomb force on fission fragment angular momenta

Nuclear fission produces fragments endowed with typically half a dozen units of angular momentum. After scission has occurred, the fragments are still interacting via the Coulomb force which exerts a torque on deformed fragments, thereby accelerating their rotations. Here, the essential features of this effect can be understood by simple perturbative considerations from which the effect on the fragment spin distributions can be obtained. Complete dynamical calculations of the coupled evolution of the spins validate the perturbative treatment, which ignores the second-order terms, showing that the fragment spins evolve essentially independently in the presence of the Coulomb torques.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Description of superheavy nuclei on the basis of a modified version of the DF3 energy functional

The possibility of describing nuclei of the uranium and transuranium region within the generalized method of the energy functional proposed by Fayans and his coauthors is studied. It turned out that, in the functional DF3, it is necessary, for this purpose, to modify the spin-orbit terms whose parameters were chosen in such a way as to describe the binding energies and charge radii of spherical nuclei from calcium to lead. The modified functional (DF3-a) describes well the energy features and charged radii for isotopic chains of uranium and neighboring elements. For deformed nuclei, the deformation was taken into account approximately. The nucleon-drip-line position obtained for these chains proved to be close to the predictions of one of the most successful calculations by the Skyrme-Hartree-Fock method with the HFB-17 functional. It is verified that the use of the functional DF3-a does not impair the description of the properties of lighter nuclei, for which the functional DF3 was devised. Moreover, the modified functional describes better, than the original one, new data on spin-orbit splitting in magic and semimagic nuclei. The calculation with the functional DF3-a confirms the doubly magic nature of the superheavy nuclide {sub 114}{sup 298}X{sub 184}. As for the neutron-separation energies S{sub n} along the isotopic chain of this element, our results are close to the predictions of the so-called micro-macro method.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Absolute Position of Targets Measured Through a Chamber Window Using Lidar Metrology Systems

Lidar is a useful tool for taking metrology measurements without the need for physical contact with the parts under test. Lidar instruments are aimed at a target using azimuth and elevation stages, then focus a beam of coherent, frequency modulated laser energy onto the target, such as the surface of a mechanical structure. Energy from the reflected beam is mixed with an optical reference signal that travels in a fiber path internal to the instrument, and the range to the target is calculated based on the difference in the frequency of the returned and reference signals. In cases when the parts are in extreme environments, additional steps need to be taken to separate the operator and lidar from that environment. A model has been developed that accurately reduces the lidar data to an absolute position and accounts for the three media in the testbed air, fused silica, and vacuum but the approach can be adapted for any environment or material. The accuracy of laser metrology measurements depends upon knowing the parameters of the media through which the measurement beam travels. Under normal conditions, this means knowledge of the temperature, pressure, and humidity of the air in the measurement volume. In the past, chamber windows have been used to separate the measuring device from the extreme environment within the chamber and still permit optical measurement, but, so far, only relative changes have been diagnosed. The ability to make accurate measurements through a window presents a challenge as there are a number of factors to consider. In the case of the lidar, the window will increase the time-of-flight of the laser beam causing a ranging error, and refract the direction of the beam causing angular positioning errors. In addition, differences in pressure, temperature, and humidity on each side of the window will cause slight atmospheric index changes and induce deformation and a refractive index gradient within the window. Also, since the window is a dispersive media, the effect of both phase and group indices have to be considered. Taking all these factors into account, a method was developed to measure targets through multiple regions of different materials and produce results that are absolute measurements of target position in three-dimensional space, rather than simply relative position. The environment in which the lidar measurements are taken must be broken down into separate regions of interest and each region solved for separately. In this case, there were three regions of interest: air, fused silica, and vacuum. The angular position of the target inside the chamber is solved using only phase index and phase velocity, while the ranging effects due to travel from air to glass to vacuum/air are solved with group index and group velocity. When all parameters are solved simultaneously, an absolute knowledge of the position of each target within an environmental chamber can be derived. Novel features of this innovation include measuring absolute position of targets through multiple dispersive and non-dispersive media, deconstruction of lidar raw data from a commercial off-the-shelf unit into reworkable parameters, and use of group velocities to reduce range data. Measurement of structures within a vacuum chamber or other harsh environment, such as a furnace, may now be measured as easily as if they were in an ambient laboratory. This analysis permits transformation of the raw data into absolute spatial units (e.g., mm). This technique has also been extended to laser tracker, theodolite, and cathetometer measurements through refractive media.

Kubalak, David↗

Energy Density Functional Study of Nuclear Matrix Elements for Neutrinoless {beta}{beta} Decay

We present an extensive study of nuclear matrix elements (NME) for the neutrinoless double-beta decay of the nuclei {sup 48}Ca, {sup 76}Ge, {sup 82}Se, {sup 96}Zr, {sup 100}Mo, {sup 116}Cd, {sup 124}Sn, {sup 128}Te, {sup 130}Te, {sup 136}Xe, and {sup 150}Nd based on state-of-the-art energy density functional methods using the Gogny D1S functional. Beyond-mean-field effects are included within the generating coordinate method with particle number and angular momentum projection for both initial and final ground states. We obtain a rather constant value for the NMEs around 4.7 with the exception of {sup 48}Ca and {sup 150}Nd, where smaller values are found. We analyze the role of deformation and pairing in the evaluation of the NME and present detailed results for the decay of {sup 150}Nd.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Short-lived binary splits of an excited projectile-like fragment induced by transient deformation

Aligned fragment emission associated with peripheral and midperipheral dissipative collisions of {sup 124}Xe+{sup 124}Sn at E/A=50 MeV is examined. Binary decay of the excited projectile-like fragment (PLF*) is correlated with significant velocity damping from the projectile velocity. Both a forward emission component, attributed to standard statistical emission, and a backward component are observed. The backward component arises from both statistical and dynamical decay processes. This backward component manifests a strong alignment with the direction of the PLF* velocity and is found to depend sensitively on the atomic number of the light fragment, Z{sub L}, and the velocity of the PLF{sup *}. The yield of the backward component is significantly enhanced relative to the forward component. The composition of fragments emitted in the backward direction reveals that a correlation between alignment and neutron excess exists for fragments with Z<8. From the measured asymmetry of the angular distributions, the angular distribution for dynamical fragment emission is deduced. Comparison with a schematic one-dimensional Langevin model allows extraction of both the magnitude and the dependence on Z{sub L} of the transient initial deformation of the PLF*. Fragment emission times of the order of 0.25-1.5x10{sup -21} s are extracted.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Analyses of large quasistatic deformations of inelastic bodies by a new hybrid-stress finite element algorithm

A new hybrid-stress finite element algorithm, suitable for analyses of large, quasistatic, inelastic deformations, is presented. The algorithm is base upon a generalization of de Veubeke's complementary energy principle. The principal variables in the formulation are the nominal stress rate and spin, and thg resulting finite element equations are discrete versions of the equations of compatibility and angular momentum balance. The algorithm produces true rates, time derivatives, as opposed to 'increments'. There results a complete separation of the boundary value problem (for stress rate and velocity) and the initial value problem (for total stress and deformation); hence, their numerical treatments are essentially independent. After a fairly comprehensive discussion of the numerical treatment of the boundary value problem, we launch into a detailed examination of the numerical treatment of the initial value problem, covering the topics of efficiency, stability and objectivity. The paper is closed with a set of examples, finite homogeneous deformation problems, which serve to bring out important aspects of the algorithm.

Reed, K. W.↗

Microscopic description of quantum shape fluctuation in C isotopes

Covariant density functional theory is used to investigate quantum shape fluctuation in {sup 16}C and other even-even carbon isotopes. Long-range correlations beyond the mean-field approximation are taken into account by configuration mixing of wave functions with triaxial shapes and by restoring the spontaneously broken rotational symmetry through a three-dimensional angular-momentum projection. The systematics of the excitation energy of the 2{sub 1}{sup +} state and the B(E2:2{sub 1}{sup +}{yields}0{sub 1}{sup +}) values in carbon isotopes are reproduced rather well. Decoupled structures with rather different deformations for neutrons and protons have been found in {sup 16,18,20}C. In addition, the effects of shape fluctuations in {beta} and {gamma} deformations on the low-lying excited states of these nuclei are examined.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Shape coexistence near the N=38 shell gap: Magnetic moment of the 981.6 keV J{sup {pi}=}8{sup +} level in {sup 72}As

We report on the first determination of the magnetic moment of the 981.1 keV, J{sup {pi}=}8{sup +} level in {sup 72}As, a nucleus that belongs to the A{approx_equal}70 mass region dominated by rapidly changing deformations and shapes. The 8{sup +} level is the bandhead of a collective sequence of positive parity levels coexisting with low-spin and medium-spin spherical shell-model states. The magnetic moment was measured by the time-integral perturbed angular distributions method to be {mu}=-(4.272{+-}0.280){mu}{sub N}. This value is in disagreement with the presumed [{pi}(1g{sub 9/2}),{nu}(1g{sub 9/2})] configuration and points to a more complex configuration involving two neutrons in the 1g{sub 9/2} orbital.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Quantum phase transitions in Bose-Fermi systems

Research Highlights: > We study quantum phase transitions in a system of N bosons and a single-j fermion. > Classical order parameters and correlation diagrams of quantum levels are determined. > The odd fermion strongly influences the location and nature of the phase transition. > Experimental evidence for the U(5)-SU(3) transition in odd-even nuclei is presented. - Abstract: Quantum phase transitions in a system of N bosons with angular momentum L = 0, 2 (s, d) and a single fermion with angular momentum j are investigated both classically and quantum mechanically. It is shown that the presence of the odd fermion strongly influences the location and nature of the phase transition, especially the critical value of the control parameter at which the phase transition occurs. Experimental evidence for the U(5)-SU(3) (spherical to axially-deformed) transition in odd-even nuclei is presented.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

New approach for alpha-decay calculations of deformed nuclei

We present a new theoretical approach to evaluate alpha-decay properties of deformed nuclei, namely the multichannel cluster model (MCCM). The deformed alpha-nucleus potential is taken into full account, and the coupled-channel Schroedinger equation with outgoing wave boundary conditions is employed for quasibound states. Systematic calculations are carried out for well-deformed even-even nuclei with Z>=98 and isospin dependence of nuclear potentials is included in the calculations. Fine structure observed in alpha decay is well described by the four-channel microscopic calculation, which is performed for the first time in alpha-decay studies. The good agreement between experiment and theory is achieved for both total alpha-decay half-lives and branching ratios to the ground-state rotational band of daughter nuclei. Predictions on the branching ratios to high-spin daughter states are presented for superheavy nuclei, which may be important to interpret future observations.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗