Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “active data”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14
All sourcesNASA NTRSDOE OSTI
NASA NTRS2023

Potentially Underestimated Gas Flaring Activities—A New Approach to Detect Combustion Using Machine Learning and NASA’s Black Marble Product Suite

Monitoring changes in greenhouse gas (GHG) emission is critical for assessing climate mitigation efforts towards the Paris Agreement goal. A crucial aspect of science-based GHG monitoring is to provide objective information for quality assurance and uncertainty assessment of the reported emissions. Emission estimates from combustion events (gas flaring and biomass burning) are often calculated based on activity data (AD) from satellite observations, such as those detected from the visible infrared imaging radiometer suite (VIIRS) onboard the Suomi-NPP and NOAA-20 satellites. These estimates are often incorporated into carbon models for calculating emissions and removals. Consequently, errors and uncertainties associated with AD propagate into these models and impact emission estimates. Deriving uncertainty of AD is therefore crucial for transparency of emission estimates but remains a challenge due to the lack of evaluation data or alternate estimates. This work proposes a new approach using machine learning (ML) for combustion detection from NASA's Black Marble product suite and explores the assessment of potential uncertainties through comparison with existing detections. We jointly characterize combustion using thermal and light emission signals, with the latter improving detection of probable weaker combustion with less distinct thermal signatures. Being methodologically independent, the differences in ML-derived estimates with existing approaches can indicate the potential uncertainties in detection. The approach was applied to detect gas flares over the Eagle Ford Shale, Texas. We analyzed the spatio-temporal variations in detections and found that approximately 79.04% and 72.14% of the light emission-based detections are missed by ML-derived detections from VIIRS thermal bands and existing datasets, respectively. This improvement in combustion detection and scope for uncertainty assessment is essential for comprehensive monitoring of resulting emissions and we discuss the steps for extending this globally.

gas flaring↗
NASA NTRS2024

Harmonizing Food Systems Emissions Accounting for More Effective Climate Action

Food systems—encompassing activities in food production, land-use change, supply chains and waste management—contribute significantly to climate change. Recent estimates indicate that food systems produce over 30% of annual anthropogenic greenhouse gas (GHG) emissions (about 20% of CO 2 , 50% of CH 4 , and 75% of N 2 O), with the Intergovernmental Panel on Climate Change (IPCC) estimating a notably broad range of 23%–42% of global GHG emissions. This paper synthesizes current research on the contributions of food systems to climate change, highlights challenges in quantifying their impact and proposes a harmonized accounting framework for more effective climate action. We recommend that an expert committee aligned with the IPCC develop guidance for food systems emissions accounting in four key areas, including: (1) defining system boundaries and nomenclature; (2) developing protocols to allocate broader sectoral emissions to food systems; (3) prioritizing critical areas for research into activity data and emissions factors; and (4) developing a balanced framework for evaluating the impact of mitigation interventions in light of other food systems imperatives. The committee should be integrated into two key international policy processes—the United Nations Framework Convention on Climate Change and the United Nations Food Systems Summit—to support coordinated action towards global net-zero goals. Guidance from the committee could significantly improve the ability of governments, companies, and researchers to estimate, report, monitor and ultimately reduce the climate impacts of food systems.

GHG accounting↗
DOE OSTI2018

Ultrafast table-top dynamic radiography of spontaneous or stimulated events

Disclosed herein are representative embodiments of methods, apparatus, and systems for performing radiography. For example, certain embodiments concern X-ray radiography of spontaneous events. Particular embodiments of the disclosed technology provide continuous high-speed x-ray imaging of spontaneous dynamic events, such as explosions, reaction-front propagation, and even material failure. Further, in certain embodiments, x-ray activation and data collection activation are triggered by the object itself that is under observation (e.g., triggered by a change of state detected by one or more sensors monitoring the object itself).

36 MATERIALS SCIENCE↗
DOE OSTI2018

Evolution, Current State of the Art, and Interpretation of Aircraft-Based Methane Emission Quantification at the Natural Gas Basin-Level

Accurately quantifying methane (CH4) emissions from the oil and gas (O&G) industry is challenging given the existence of many potential emission sources, differences in industry practices and regulations, and often incomplete or out-of-date activity data. It is thus important to regularly assess emission inventories and support improvements by deriving independent estimates using state-of-the-science approaches. Recent research has provided CH4 emission estimates from the O&G supply chains based on different measurement techniques at multiple spatio-temporal scales. Natural gas basin-scale aircraft-based atmospheric measurements indicate greater CH4 emissions than emission inventories based on up-scaling of component-/facility-level emission measurements from a relatively small sample size. Here we present results from a coordinated field study that compares concurrent CH4 emission measurements using different techniques and scales to better understand the strengths and weaknesses of each approach, with a focus on the aircraft-based estimation method. We describe the importance of (i) decades of measurement technology development, (ii) experience in designing measurement sampling strategies and aligning system boundaries, and (Hi) properly interpreting CH4 emission estimates for successfully reconciling aircraft-based measurements with emission inventories and for identifying CH4 emission mitigation potential. We illustrate that aircraft-based top-down estimates represent a brief snapshot of total basin-level CH4 emissions. Thus, a high spatio-temporally resolved bottom-up emission inventory is needed to identify key CH4 sources (including episodic sources) at the process level. While this paper provides a brief overview of the overall study design and findings, its focus is on the implementation of the aircraft measurements and its interpretation and results. A separate paper describes in more detail the overall organizational structure of the study as well as the study implications from an industry perspective.

03 NATURAL GAS↗
DOE OSTI2020

Adaptive sensing for a gas leak detection

A method, a system and an apparatus for adaptively sensing a gas leak. The method includes: obtaining wind data from a wind sensor, identifying at least one wireless mote in a plurality of wireless motes that is most likely to detect a gas plume from the wind data, activating the identified at least one wireless mote to trigger measuring gas concentration of the gas plume, and identifying the location of the gas leak if the gas concentration is above a predetermined threshold. Also included is a system for adaptively sensing a gas leak having a wind sensor, a plurality of wireless motes and a server in communication therewith. An apparatus for adaptively sensing a gas leak in an industrial site is also provided.

03 NATURAL GAS↗
DOE OSTI2014

Identification of Leakage Spectra from Neutron Activation in Glass/Cherenkov Detectors - Paper 96

Oak Ridge National Laboratory has developed a new detector system concept that can be deployed in major US cities to identify the leakage spectrum of a nuclear weapon detonation. The detector is based on a small piece of glass that has been doped with an element that has a high activation cross section and creates a radioactive activation product with a reasonable length half-life. The decay of the activation product(s) after exposure creates Cherenkov light which can propagate to a photomultiplier and can be turned into a count-rate signal. The signal from each glass in each detector in a city can be individually analyzed to determine the amount of activation products produced in the initial exposure. Several activation products can be determined in a single glass if the half-lives are not the same. With a known source location and a detailed 3D model of a city, neutron transport simulations can be made by using a library of known sources to predict the activation amounts each source would have made in the glass detectors. A simple comparison of the measured activation amounts and the predicted activation amounts can identify the source spectrum contained in the library that is the best match. Choosing dopants with a large range in the threshold energy for the activation reactions can help to differentiate the spectra in the library. The method of matching the measured activation amounts to the predicted activation amounts to identify the source spectrum is similar to the analysis used for the passive Activation Foil Integrated Detector System (AFIDS), also developed at Oak Ridge National Laboratory. In AFIDS, wires or foils of known mass and isotopic composition are deployed before and then collected after exposure. Counting gammas in a nearby laboratory determines the activation amounts. The glass/Cherenkov system is active - it uses a battery-powered detector to count flashes of Cherenkov light and to communicate its count rates to a remote location for further analysis. Work has been performed in several areas, including glass making, automated detection and communication systems and software tools for analysis of the signal and source spectrum identification. Bell and Boatner have developed phosphate glasses that incorporate elements with high capture cross sections, and Hayward has simulated the response with Geant4 and measured the response with isotopic gamma sources. This paper will focus on the software tools for determining the activation amounts from the Cherenkov count-rate signal and finding the best matching source spectrum. A test problem in an urban environment is used to demonstrate the potential of a spectrum identification system using neutron activation. The analysis methods developed to identify the neutron leakage spectra from Cherenkov light given off by neutron activation in doped glasses work well. The calculation used to unfold the count-rate information into the number of actual activation products uses robust algorithms that can also compute associated uncertainties. These uncertainties and the known uncertainties of the glass tube material compositions are incorporated into the matching analysis to determine which of the source spectra in the library best matches the measured activation data. Any measurement method used to identify a neutron source spectrum relies at some point on a comparison against known sources; no identification method is definitive. Detection systems measure some physical aspect of the source, not its serial number. Many systems measure the physical aspect to determine that the source has some property, and then leave it to experts to determine which potential sources share that property. The analysis system presented here incorporates the comparison into the analysis itself. The statistical tests show which of the known library sources match the measured data the best and whether that match is a good match. If the best match still does not fit the measured data well (a very high χ{sup 2} value), that indicates the true source is not one of the sources in the library. This is still valuable information for decision makers. (authors)

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2026

Precision measurement of positron decay modes of Xe-125 in the LUX-ZEPLIN experiment

The radioisotope $^{125}\text{Xe}$ is a short-lived ($T_{1/2}\sim16.9 h$) activation product of the neutron calibrations performed in the LUX-ZEPLIN experiment. Subsequently, $^{125}$Xe decays primarily ($>99\%$) via electron capture, but positron emission has been confirmed by direct measurement to at least the 243 keV level of $^{125}\text{I}$. An additional decay to the 188keV level is expected from triple-coincident measurements of the annihilation and relaxation $γ$ rays, but has not been directly confirmed. By utilizing multiple-scatter event analysis and the pre-activation data to constrain backgrounds, this work reports positron emission with a statistical significance of 5.5$σ$. This corresponds to a total branching ratio of $0.29\pm0.08_{\text{stat.}}\pm0.04_{\text{sys.}}$%, and is the first constraint to the individual branching levels of $^{125}\text{I}$.

Akerib, D. S. [SLAC; KIPAC, Menlo Park]↗
NASA NTRS1997

The Benchmark Active Controls Technology Model Aerodynamic Data

The Benchmark Active Controls Technology (BACT) model is a part of the Benchmark Models Program (BMP). The BMP is a NASA Langley Research Center program that includes a series of models which were used to study different aeroelastic phenomena and to validate computational fluid dynamics codes. The primary objective of BACT testing was to obtain steady and unsteady loads, accelerations, and aerodynamic pressures due to control surface activity in order to calibrate unsteady CFD codes and active control design tools. Three wind-tunnel tests in the Transonic Dynamics Tunnel (TDT) have been completed. The first and parts of the second and third tests focused on collecting open-loop data to define the model's aeroservoelastic characteristics, including the flutter boundary across the Mach range. It is this data that is being presented in this paper. An extensive database of over 3000 data sets was obtained. This database includes steady and unsteady control surface effectiveness data, including pressure distributions, control surface hinge moments, and overall model loads due to deflections of a trailing edge control surface and upper and lower surface

Scott, Robert C.↗
NASA NTRS1986

Implementation of Ada protocols on Mil-STD-1553 B data bus

Standardization activity of data communication in avionic systems started in 1968 for the purpose of total system integration and the elimination of heavy wire bundles carrying signals between various subassemblies. The growing complexity of avionic systems is straining the capabilities of MIL-STD-1553 B (first issued in 1973), but a much greater challenge to it is posed by Ada, the standard language adopted for real-time, computer embedded-systems. Hardware implementation of Ada communication protocols in a contention/token bus or token ring network is proposed. However, during the transition period when the current command/response multiplex data bus is still flourishing and the development environment for distributed multi-computer Ada systems is as yet lacking, a temporary accomodation of the standard language with the standard bus could be very useful and even highly desirable. By concentrating all status informtion and decisions at the bus controller, it was found to be possible to construct an elegant and efficient harware impelementation of the Ada protocols at the bus interface. This solution is discussed.

Ruhman, Smil↗
NASA NTRS1975

ASTP experiment support data processing

Activities associated with the generation of ASTP experiment support data in the areas of spacecraft ephemeris and orientation and instrument pointing and field-of-view are documented. It is intended that this document represent a cradle-to-grave chronicle of these activities. To satisfy this intent while facilitating the ready dissemination of information, the document is being published twice. The first publication, scheduled for release prior to ASTP liftoff, includes all preflight phases of the experiment support activity in addition to those appendixes that do not pertain to any mission-specific data. The second publication will provide any required updates to the original documentation and will add all mission-specific data, including documentation of all postflight data processing activities and data archiving information.

Osburn, R. K.↗
NASA NTRS2010

Onboard Processing of Multispectral and Hyperspectral Data of Volcanic Activity for Future Earth-Orbiting and Planetary Missions

Autonomous onboard processing of data allows rapid response to detections of dynamic, changing processes. Software that can detect volcanic eruptions from thermal emission has been used to retask the Earth Observing 1 spacecraft to obtain additional data of the eruption. Rapid transmission of these data to the ground, and the automatic processing of the data to generated images, estimates of eruption parameters and maps of thermal structure, has allowed these products to be delivered rapidly to volcanologists to aid them in assessing eruption risk and hazard. Such applications will enhance science return from future Earth-orbiting spacecraft and also from spacecraft exploring the Solar System, or beyond, which hope to image dynamic processes. Especially in the latter case, long communication times between the spacecraft and Earth exclude a rapid response to what may be a transient process - only using onboard autonomy can the spacecraft react quickly to such an event.

Jupiter↗
DOE OSTI2022

Applications of Autonomous Data Collection and Active Learning

Advances in sensors and robotics have dramatically improved the diversity of experimental approaches available to the materials community. Autonomous data collection platforms, either custom-made or commercially available, provide researchers with novel tools with which to probe materials behavior and perform advanced materials characterization. The application of novel control algorithms and active learning approaches can create much more robust experimental data, or can be used to improve the performance of existing characterization tools. Five papers within this special topic focus on experimental and computational methodologies for use in automatic data collection routines for materials characterization. From novel platforms for materials discovery to new statistical frameworks for assessing the autonomous experimentation process, these five papers highlight the diverse range of applications of automation for advancing materials science.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Measuring and Extracting Activity from Time Series Data

This report summarizes the results of an LDRD focused on developing and demonstrating statistically rigorous methods for analyzing and comparing complex activities from remote sensing data. Identifying activity from remote sensing data, particularly those that play out over time and span multiple locations, often requires extensive manual effort because of the variety of features that describe the activity and the required domain expertise. Our results suggest that there are some hidden challenges in extracting and representing activities in sensor data. In particular, we found that the variability in the underlying behaviors can be difficult to overcome statistically, and the report identifies several examples of the issue. We discuss key lessons learned in the context of the project, and finally conclude with recommendations on next steps and future work.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2024

Deep Learning for Full Waveform Inversion of Elastic Active-Source Seismic Data to Estimate P-Wave Velocity Models

Seismic imaging methods are critical for Global Security and Energy & Homeland Security missions and activities that rely on subsurface characterization, but traditional methods remain computationally expensive and require significant labor hours and expertise to execute. Within the past few years, machine learning (ML), namely deep learning (DL), has been used to develop data-driven end-to-end full waveform inversion (FWI) methods to estimate 2D P-wave velocity (Vp) models in a fraction of the time as conventional FWI. These methods, however, are trained on simplistic acoustic wave seismic data and Vp models that are not realistic nor representative of real-world observations, leaving a large gap between the state-of-the-art and deployable, feasible, and practical DL FWI methods. Here, we generate a synthetic active-source, 3D, elastic wave seismic data set and a variety of Vp models with realistic geologic structure for training DL FWI methods. We evaluate six different methods that have performed well for acoustic DL FWI or medical imaging tasks using our more realistic dataset. We find that these six trained models do not match the performance of published acoustic end-to-end DL FWI methods, indicating more training data may be needed, physics may need to be incorporated to achieve good accuracy at the sacrifice of the end-to-end advantage, and/or novel methods need to be developed to enable end-to-end DL FWI methods to perform well for real-world seismic data.

45 MILITARY TECHNOLOGY, WEAPONRY, AND NATIONAL DEF↗
NASA NTRS1977

Consumables data base workbook: Formulation of consumables management models

Activity consumables data specifications and data applications are presented. The data are structured in a series of "Consumable Data Worksheets" for each activity that includes a profile of its operations and the rate of each consumable required to support the given activity. The data worksheets provide for the uniform specification of consumables data, allows for the ready identification of the consumables affected by a given activity, and facilitates the updating process. An activity is defined and the data that must be included in the data worksheets are specified. An example of its use and application is given, i.e. consumables data requirements for the performance of the EVA. The consumables data for the activities currently identified for the shuttle spacecraft are included. The consumables data sources are identified and information to facilitate the maintenance process is detailed.

Zamora, M. A.↗
DOE OSTI2020

Composite Analysis Solid Waste Release Data Reduction of Activity Flux from Waste Sites to the Vadose Zone for Baseline Assessment

This environmental calculation file (ECF) describes the data reduction methodology for the solid waste release datasets generated by the Composite Analysis Solid Waste Release (CASWR) model (CP-62766, Model Package Report: Composite Analysis Solid Waste Release Model [CASWR Model]) and documents the resulting reduced datasets for the updated Composite Analysis (CA) baseline assessment. This ECF is in support of the updated Hanford Site CA. The purpose of the updated Hanford Site CA is to provide an estimate of the cumulative radiological impacts from active and planned low-level radioactive waste disposals and other potentially interacting radioactive waste disposal sources that will remain following Hanford Site closure. The vadose zone modeling activities associated with the CA includes solid waste forms as contaminant sources. To support the modeling of solid waste transport from the vadose zone to the groundwater at the Hanford Site, the CASWR model was designed to generate deterministic radionuclide release rates for the Hanford Site Central Plateau solid waste disposal sites. The complete CASWR model-generated dataset for the CA Baseline Assessment consists of 2,378,831 sets of time and release rates (1,073,869 sets for the 200 East Area and 1,304,962 sets for the 200 West Area), representing a course of the simulation from year 1953 to year 12,069, 16 radiological contaminants of potential concern (COPCs), and 237 solid waste sources as documented in ECFHANFORD- 19-0112, Solid Waste Release Calculations for the Composite Analysis Baseline Assessment. For several of the STOMP vadose zone models, the number of release rate data pairs required for release at all waste sites would exceed the limitations imposed by the STOMP modelling software package used to simulate contaminant transport through the vadose zone. As a result, a data reduction of the CASWR dataset is required prior to its use as a source input for the CA vadose zone modeling activities.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2018

Validation Study of the Spacecraft Background Activation using RHESSI Data

This document serves as a brief writeup of the work done to validate CINDER2008 and the Activation Analysis Tools in the Activation in Accelerator Radiation Environments (AARE) distribution that are used to calculate the activation of spacecraft material while in orbit [1{3]. The validation study involves replicating the decay gamma spectrum as observed onboard the RHESSI spacecraft in the high-purity germanium (HPGe) detectors after crossing the South Atlantic Anomaly (SAA) [4]. The tools involved are a suite of Python scripts, the transmutation code CINDER2008 accompanied with a suite of scripts distributed with AARE,MCNPX, and MCNP6.2 [2,5{7]. Figure 1 shows the gamma ray spectrum this study replicates as the spectrum designated \Difference".

42 ENGINEERING↗